Liczymy pasujące modele…
This is a drone frame for the Eachine E010 Mini. Be aware that this frame makes the drone way more harder to control (and a lot faster). So it may not be suited for beginners. It also doesn't have prop guards, so you may want to be more…
Portable EV charger TopAC EVE01-11R Powered by Shelly wall mount. Edit: Fixed some dimensions and redrawed some areas
I wanted to design a frame for the Eachine E010 style drones that is very light but can withstand crashes. So here it is in 6mm and 7mm motor variations. I play a lot with my E010 built into this frame and I crash a lot but the frame…
Wall mount for Shelly TopAC Portable EV Charger. It can also be printed on a small print bed (170x200mm). The width is chosen so that the feet of the EV act as a guide. The charger is attached using 20 mm hook-and-loop Fastener. This is…
a little remix to fit the screws better and also tidy up the last layers of the rotator shields Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Category: R/C Vehicles
Print two bottom parts and two top parts, they are symmetrical. Fix bottom parts to the wall, insert ev charger, fix it in place with top parts.
For Christmas I gave myself an inexpensive thermal imaging camera. So I got it 10% cheaper. I am very satisfied and it is more than sufficient for my needs. Except for the precise diagnosis of pcb electronics. I found a suitable solution…
Simple holder for Shelly TopAC EVE01-11R EV charger
This is a 15° mount for the Eachine TX04 AIO camera/VTX combo and the Eachine E010. I also have one for the regular inductrix frame here: https://www.prusaprinters.org/prints/1861-eachine-tx04-mount-for-inductrix-tiny-whoop Print…
Adapter for the Hercules HE011 orbital sander sized to mate up with the Rockler 1 1/2" Dust Right FlexiPort or standard shop vac hoses. Twists and locks on to the little studs on the output end of the sander like the stock dust bag does.…
This is a model of the hood for the Eachine E013 or like frames with a camera. I have added the 3rd hole on the front right of the hood for the receiver antenna to come through. This hole allows for a range boost on the drone. Final…
I created this holster to carry my AGP 9 Magazines in airsoft games. It should also fit ARP 9 and other similar magazines. The clip on the back can be used to attach it to Molle or a belt. Tolerances are quit tight so the magazine won't…
This is a easy to print protection cap for the Hikmicro E-01 Thermal Camera. I printed it with TPU 95A. No supports needed. Just use a rubber band to fix it. If someone has a 3D-Scanner, it would be very nice to get a good 3D scan of the…
Thickened Fuselage01 modified using Blender to make it strong enough to be printed from TPU. Also increased motor mount thickness and made cut out for xt30 and motor wire to passthrough the front. Recommended version:…
This is a camera + VTX holder and protector for the Eachine E010S. I couldn't find appropriated version so I started again from the Oscar Liang version made for E010 (the Camera + VTX module is much smaller on E010S). I have the E010S -…
Eachine E010 Super Mini Light AIO camera mount 20 deg Category: R/C Vehicles
Eachine E010 battery adapter i use elastic sbs filament Category: R/C Vehicles
This tiny box protects your eachine E010S and also stores some batteries, charger and tools. I added some rubber dampers at the bottom of the middle part of the case. Have fun :-) Update: I added another cover (E010S_o2.stl) that gives…
Replacement for your Campagnolo brake nylon spring support. Printed in PETG
Echine original 1s battery box Print Settings Printer Brand: Prusa Printer: I3 MK3S Resolution: 0.2 Infill: 15% Filament: 3D Jake PLA Category: Hobby
嵌合パーツは、クリープによる変形でいずれ保持力がなくなるだろうから、ケースに入れて使用して欲しい。フランジがあるキートップなら、外れ防止と、必要以上の傾きを防止できるのではないかと思う。 デコードソフトにおいてセンターと方向SWの入力がある場合は、方向SWの入力を無視するようにすると、センターのデータを入力しやすくなる。
just pull of the old sticks of your e010 (or similar) radio and put on these more comfortable ones. you may have to drill out the holes to make them fit. Print Settings Printer: Turnigy Fabrikator Rafts: No Supports: No Category: R/C…
Gridfinity bin for the Fenix E01 flashlight
Eachine E010 Mini Stick Handle Extension. Clips on to 13mm x 2mm knob. Designed to be printed with the button down and the clips up. Print Settings Printer: Monoprice Mini Rafts: No Supports: No Resolution: .1mm-.2mm Infill: 100% Notes:…
I totally redesigned the Box from MegaCadler to optimize print time a little. Printing is still ongoing. Slicer tells me 1:35h instead of 3:20h for the lower part. Furthermore I added some clips to keep it save closed. Category: R/C…
Here is a remixed version of joeweese's camera mount for the Eachine E010S. Here is his camera mount: https://www.thingiverse.com/thing:2268152 I tried making his camera mount and it worked fine for a while, but after several flights, the…
FPV AIO Camera mount for tiny whoop or e010. I designed it to be used with these cameras: Link I printed this in red PETG.
I cant remember/find where i got these from originally. good simple stick extenders for increased fidelity on the sticks. Category: R/C Vehicles
Inspired by https://www.thingiverse.com/thing:2579328 , this is a front camera mount for the Machine E010s Pro (shark body). The mount is at 20 degrees and the camera is held on by a rubber band, but 3m foam tape would work just as well.…
Hi, here's frame support for Eachine E010. Now frame feels more stiff. Hopefully motor cups will now take hits better and supports struts will last longer. Uploaded two files 46mm and 47mm motor to motor distance. Edit: added 1mm thick…
A compact Gridfinity 1x1 bin that keeps two EDC lights standing upright and ready to grab: the Wuben E7 right-angle flashlight and the Fenix E01 V2.0 AAA keychain light. An optional version adds a pocket for a spare AAA battery for the…
A battery cage that fits snugly in the eachine e010 batery cage, this tray can hold the longer batteries in a good fit. It requires no screws or glue to attach, but you have to cut the front part of the battery cage off the e010 in order…
Here is a remixed version of joeweese's camera mount for the Eachine E010S. Here is his camera mount: https://www.thingiverse.com/thing:2268152 I tried making his camera mount and it worked fine for a while, but after several flights, the…
Print two bottom parts and two top parts, they are symmetrical. Fix bottom parts to the wall, insert ev charger, fix it in place with top parts.
bis 150 % ohne Stützen und ohne Rand zu scalieren, möglichst mit ABS drucken und evtl. kurz mit Aceton behandeln wegen Wasserdichtigkeit.
use supports when printing if there needs to be any adjustments made message me and i can make them. will still need metal insert i will try to make one that doesn't need one but we will see. dryer knob 1 file is the one that uses the…
This is a keycap created for the joystick (5-position switch) DIP conversion kit. https://tech.alpsalpine.com/j/products/detail/SKRHAAE010/ You can buy: https://akizukidenshi.com/catalog/g/g114676/…
Decorative planter series… Planter E01: Supports needed at bottom overhang. Scale as needed
This Viking model was designed by Sunlu. We use Sunlu Standard Resin to print it. The Viking holds a hammer and wears a thick battle robe, evoking a sense of readiness for combat. The model captures the bravery and determination of Viking…
