Wyniki wyszukiwania: ekn

Spotify Keychain with Artist Name (Multiple Artists), Camila Cabello, Katy Perry, Taylor Swift, Bad Bunny, The Weeknd, Lana Del Rey, Morat, BTS, Jesse & Joy, One Direction, Peso Pluma, Metallica, 21 Pilots, Olivia Rodrigo,THE 1975, etc.

Y accept requests for another artist, song or playlist that's not on the list, It'll be the same base for them. Artists: Camila Cabello Katy Perry Taylor Swift Bad Bunny The Weeknd Lana Del Rey Morat BTS Jesse & Joy One Direction Peso…

Cable clamp clip for Fisher Teknetics Tesoro Garrett Minelab Whites Rutus metal detector

Hello ! I created simple but reliable cable clip clamp for cable of coil to metal detectors. Dimensions are 6 mm cable and 20 mm shaft. Usable for upper (aluminium) shafts of all metal detectors with that dimensions. I use that cable clip…

The Weeknd mask

The Weeknd mask for concerts

Bab El-Mansour - Meknès, Morocco

🇲🇦 مرحبا بك في المغرب Welcome to Morocco! This model was designed by Dany Sánchez . Bab El-Mansour is a grand gate in Triumphal Arch style in the Moroccan city of Meknès ( bab means doorway or gate in Arabic). It is the most important and…

The Weeknd Funko Pop-Style 3D Printable Figurine – Music Icon Collectible

Bring home The Weeknd in his Funko Pop-style glory with this 3D printable figurine , capturing the essence of one of music’s biggest icons. From his iconic signature hairstyle to his cool, laid-back style , this model is perfect for fans…

The Weeknd XO Keychain |two sizes

Simple XO Keychain. You can swap colors for the entire XO logo or just the heart, as it's 1mm higher. No AMS needed.

Hobbywing Switchholder for 1/10 Scale Tekno SCT410 2.0 / MT410 2.0

ATTENTION: the switch holder V1 is designed to be used with hobbywing 3652 motor or similar size!! (max lenght 53mm!!) otherwise use V2 or V3 instead. a simple mount for the hobbywing ezrun esc. the sct/mt410 2.0 chassis offers a place to…

Starboy California Stamped License Plate. The Weeknd ft Daft Punk.

License plate stamped from Starboy, The Weeknd's song with Daft Punk. Placa de matrícula estampada de Starboy, la canción de The Weeknd con Daft Punk.

VENOM - SPACEKNIGHT

One of my fav series! Printable in filament or resin Custom settings are welcome

Tekno sideguard

Print details: Material: Petg,FLEX Layer height: 0.15mm or 0.2mm Supports: Yes Infill: 15%

Mister FPGA wedge case for Teknet 10 keyless keyboard

This is the MiSTer FPGA wedge case to be used with the Teknet 10 keyless keyboard. again check the video for more information.

PipeKnight, A 3D printed robot pipe lamp

This is a fully 3D printable pipe lamp (minus the electrical components) I named “PipeKnight”. I designed the lamp socket mount to easily accommodate a cheap LED lamp (link below). It can be printed using PLA, but PETG or stronger would…

Mapleknoll Cottage

Mapleknoll Cottage – A Whimsical Woodland Home Tucked away in the heart of an enchanted grove, Mapleknoll Cottage is the perfect print for anyone who loves cozy fairytale vibes and detailed miniature architecture. Some supports are…

RippleKnit Vase (VASE MODE)

Vase designed to be printed in vase mode, featuring an undulating ripple texture that mimics the look of knitting. This project consists of two parts: the vase itself and the vase's bottom, each with its specific printing requirements.…

Rain Gauge based on Tipping bucket-teknik

Rain Gauge based on Tipping bucket-teknik and esp32 with deep sleep and hall effect sensor and rechargeable lipo battery. I measure 0.4 mm rain att each tipp. I use ESP32 Firebeetle 2 and AH180 as hall effect sensor alternative a reed…

Tekno MiP/Magnetic Tray

Holds MiP drivers and a 3'' harbor freight magnetic tray

Geeknson Bristol Card Dispenser / Cardholder

Card dispenser for the gaming Table Bristol from Geeknson, and maybe for other gaming tables from Geeknson. Version “mini” max size for sleeved cards 46x71 mm Version "normal" max size for sleeved cards 66x91 mm Version “large” max size…

Fisher F-Pulse / Teknetics Tek-Point Tip Protector

Here's a tip protector for your FISHER F-PULSE / TEKNETICS TEK-POINT pin pointer. If you have any suggestions or questions please feel fee to comment below. -Now print , slide on and go metal detecting ! Print Settings Printer Brand: TEVO…

Furick Cup Diffuser Installation Tools for Jazzy 10, Fupa 12, MooseKnucle 14, BBW 16

A small tool to aid with installing new diffuser screens into Furick welding cups. Each file has been printed and tested to ensure fitment with both the tungsten and cup size. Is is necessary to print one for each size? Probably not, but…

Logitech Z337 volumeknob wall-mount

Logitech Z337/Z333 volumeknob wall-mount. Printing Print with support for 3.5mm cable holder.

Tekno rc keychain

Petit porte clef avec le logo de tekno rc. Print in place

Tekno Body Post

Replacement body post for the Tekno SCT410 2.0. 70mm long with only a top hole, drill hole where needed or add in CAD. Did not make many holes to not lower the strength of the post, introduce extra failure point.

AMS mount for Elfa/Biltema shelf system Art87-542 270mm Hylleknekt .STEP

Need 2x 50mm M4 and 2x 30mm M4 with 8x M4 brass nut. It is possible to either fasten the bracket to the AMS with small and long wooden screws or have it loose and just place it on the bracket. Original idea is to fasten the bracket and…

Cap for Tekno Wheels (48mm hole, blank)

My cars' winter tyres where fitted on Tekno Wheels rims, and the center hole caps were in really bad shape, so I made these. These fit 48mm center hole. Scaling on XY might allow you to fit them on other hole sizes too. STL is just plain…

The Weeknd Singer Figurine Celebrity 3D Printable

Bring the iconic energy of modern R&B to your space with this stunning 3D printable figurine that captures a dynamic singing pose perfect for any music lover's collection. This detailed STL model showcases exceptional craftsmanship with…

Batterietray - Tekno ET 48.2

You need two M3x25 and two M3 Nuts. Print the holder and Thumbscrew twice. Just add a pause after the hex section on the thumbscrews, add a M3 Nut to your print and resume. The M3 bolts I glued into the holders. Fit my Gens Ace 6570mah…

GeeknSon Archie Dice/Rolling tile

A tile to hold a dice set & roll for my GeeknSon Archie table

Tekno SCT air guards

I printed mine with TPU with four wall sides top and bottom at 80% gyroid infill. Stiffens up the entire nerf bar and will last forever.

Mudflaps for Tekno SCT410 2.0

designed some mudflaps for the Tekno SCT410 2.0 for an more scale look. you need: 6x m3x10mm screws 6x m3 nylock nuts 6x washer (optional) 2x mudflap mounts (preferred in petg or nylon) 2x mudflaps (preferred in tpu or cut a 2mm rubber…

Hundeknochenhalter, Dogboneguard,

Damit der Hund das letzte Stück Oxenziemer nicht am Stück verschlingt und daran erstickt. Kann das hier im Knochenhalter fixiert werden . Etwas Sonnenblumenöl auf das Gewinde, das Leckerlie in das Loch Stecken so das ein gutes Stück auf…

GeeknSon Archie D&D Tile

For out GeeknSon Archie table, we wanted a tile that didn't already exist, so I made one. Printed on the BambuLab X1 Carbon, through the AMS, SunLu Wood filament, 0.6mm nozzle. BambuStudion 3MF file added

The Weeknd Hueforge.

Hueforge by artist Abel Makkonen Tesfaye, known artistically as The Weeknd. The design in Hueforge is by Carolina. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with Black At layer…

Tekno ET48 NT48 Mud guards

Print in TPU, will last forever. Remove if the track loamy/wet as the produce drag

Tekno EB48 NB48 rear mud guard

Print in TPU, will last forever. Remove if the track loamy/wet as the produce drag

juego de bandeja tekno rc 2.0

juego de bandejas para coche rc tekno 2.0

MAKERWEEKND LOGO

Desde el club ShareHorizons hemos querido dar una sorpresa a la comunidad de TuFactoria3D diseñando e imprimiendo el logo de la MakerWeeKND un evento que nos hace mucha ilusión.

GeeknSon Archie Beer Bottle / (Soda) Can holder

As I accidentally smacked a beer bottle from the table, I wanted a safer solution. So, I made one. The missus didn't like the square version, so I made a round one as well. The holder holds both cans and bottles, just not at the same time.

dusthood for teknomotor 1,1kw spindle

A dusthood tailored for the Teknomotor 1.1kW COM31400414 spindle, allowing unimpeded airflow from the fan to prevent spindle overheating while ensuring effective extraction. Two 80mm hoses need to be connected and secured using hose…

Geeknson Archie Pro Gaming Chest

As we've recently received our Geeknson Archie Table, we wanted more chests. As these are “less than cheep”, I fired up Tinkercad and designed one. Added holes for 6*3mm round magnets on one side, as the sides of the table's magnetic. The…

Support de casque Letmeknow - headphone holder

Support de casque à accrocher au mur pour ne plus abîmer votre casque Print Settings Printer: Craftbot Plus Rafts: No Supports: No Infill: 70 How I Designed This designed with freecad Category: Audio

Geeknson Bristol Big BOX

You definitely need support!

Teknatool Nova Jaw Organizer

I have a small collection of jaws for the Technatool Nova series building up, and this is a way to keep them orderly. The screw in the middle prints in different sizes so you don't have a tall screw sticking out of your 50mm bowl jaws,…

The Weeknd Keychain 2

🎵 The Weeknd Keychain – Exclusive 3D Model 🎵 Carry The Weeknd's unique style with you wherever you go with this 3D keychain featuring his iconic bust. A detailed and compact design, perfect for printing and showing off anywhere – on your…

Tekno MT410 Body Post Mounts

See diagram for assembly instructions. Needs 4, print laying on flat sides TKR7798 PRO607002 93245A115 94180A351

Zátka zahradní židle Jysk, model LEKNES

Zátka konstrukce opěradla a sedáku síťoviny

circuit box for teknomotor 1,1kw spindle

The original circuit box for the Tenkomotor 1.1kW spindle COM31400414 can be challenging to wire and could potentially result in cable damage or loose connections, especially if not regularly handled. Exploring its compatibility with…

Transforming TieKnot

Here is the Transforming TieKnot. I hope it will help alot of you out there. You can create more badges yourself, there is a drawing shown of the empty badge, on one of the pictures, that shows the Dimensions, a sketch. Or you can cut the…

Halter für Hella Batterie Trennschalter Batterieknochen

Eine Halterung für den Knochen

NorseKnobTop

this is a design i created for myself for Dark Doctor Studios 5M Handle set. Haven't tried with a .4mm nozzle yet( .6 doesn't work..duh), but it might need to be printed using .25mm nozzle to get the detail .

Tekno MT410 Bumper

Print this in TPU with supports under, in the orientation in the file. You can adjust the number of perimeters and infill amount to adjust stiffness, but I used the slicer defaults.

The Weeknd Mask.. Update

The Weeknd Mask from the After Hours Tour. UPDATE: Corrected mask thickness where cheeks were very thin. Category: Fashion

The Weeknd Trilogy Pop Socket

Made this for one of my daughter's friends. Needs supports touching build plate. Category: Accessories

10 cm hyldeknægt til Habo skinnesystem

Habos skinnesystem kan ses her: https://habo.com/dk/sortiment/hylder-og-hyldeknaegte/vaegskinner Det bageste hul bør ændres fra 4mm til 5mm. Dette kan gøres med en boremaskine hvis man ikke kan finde ud af at ændre filen. Jeg har printet…

Keyring Tekno

Print details: Material: PLA Layer height: 0.2mm Supports: NO Infill: 15% Multimaterial painting SMART FILL

Teknic ASU-FR510 mounting plates

Teknic ASU-FR510 analog board mounting plates. Single and dual plate versions. For use with heat set inserts. One hole on the PCB isn't aligned with the other three. This mount takes that into account. Useful for mounting the unit to the…

MrTeknology USB stick and SD card holder

Customized version of http://www.thingiverse.com/thing:46335 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=46335 Instructions Using the following options: Device_Order = -1 MicroSD_gap = 3 SD_gap = 2…

Factory Boy - Mascota #MakerWeeknd

Altura de capa: 0.2/0.24 Relleno: 3-5% Capas Superiores/inferiores: 4 Perímetros: 3 Soportes: SI

spaceKnob - a 3D Input Device

In my Project spaceKnob I am trying to create a open Source 3d mouse for CAD Software. The angles are measured with a Gyroscope and the linear movemet with 4 Hall effect sensors. The 6 DOF joint is created with a 3D printed spring. I try…

Porte Clef Letmeknow

Voici un porte clef reprenant le logo de Letmeknow! Category: Electronics

KLARK TEKNIK MIC BOOSTER CM-1 - Slide Holder

I would like to share my experimental holder for KLARK TEKNIK MIC BOOSTER CM-1. It is prepared for two small screws (2,5 milimeters diameter) (https://www.klarkteknik.com/product.html?modelCode=0838-AAT)

captureKNX SSD Case for Weinzierl KNX Hat

See GitHub for details of the project. This version of the case is for a Raspberry Pi -5 and SSD with the Weinzierl KNX Hat (Pictured below). If you are using the Tijl KNX Hat, you need to print this case . You will also need a 30mm fan…

soporte trasponder tekno

soporte trasponde principalmente para el tekno rc 1.8 se ajusta sobre la bateria para trasponder tipo lapmonitor jr

Tekno SCT410 2.0 Rear Mud Flaps Clean Version

THIS IS A CLEAN VERSION WITH NO WRITTING ON FLAPS. Printed in TPU 95 with 4 walls top and bottom 80% gyroid infill support on build plate only

GeeknSon Archie DM Station Dice Tower

Made a dice tower & dice blocker for our GeeknSon Archie table Printed in PLA, No supports (tower upside down), 0.6mm nozzle, 0.3mm layer height. Had to cut the blocker in two & glue it back together

Tekno SCT410 2.0 Hobby Wing Switch mount

Printed in ABS at 4 walls top and bottom, 40% cubic infill. Fits TIGHT on side guard, will need to short 2.4mm screws for install. Then use double back tape to secure your switch in place. WAY easier for a marshal to locate mid heat!

MrTeknology USB stick and SD card holder

Customized version of http://www.thingiverse.com/thing:46335 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=46335 Instructions Using the following options: USB_Extra = 8 Sign_TEXT = MrTeknology…

MrTeknology SD card holder

Customized version of http://www.thingiverse.com/thing:46335 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=46335 Instructions Using the following options: Sign_HEIGHT = 6 Pencil_radius = 4 Sign_FONT =…

Tesla přívěsek vyseknutý

Tesla přívěsek vyseknutý

captureKNX SSD Case for Tijl KNX Hat

See GitHub for details of the project. This version of the case is for a Raspberry Pi -5 and SSD with the Tijl KNX hat (Pictured below). If you are using the Weinzierl KNX Hat, you will need to print this case . You will also need a 30mm…

HingeKnob Ornament

The decorative knob of the hinge of my 1950s barn door had disappeared. Unfortunately, this was no longer available. Radius from the hole is 5.5mm. This printed and painted version has been satisfactory for a long time. Print with brim.…

CampStoveKnob

a replacement knob for a camping stove that lost one

MRTEKNOLOGY & KENTSTRAPPER

Customized version of http://www.thingiverse.com/thing:273099 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=273099 Instructions Using the following options: basey = 75 basex = 190 borderwidth = 2…

Aspire Tekno Charging Stand

I created this to help with charging my Aspire Tekno vape as they have an offset USB port on the bottom of the battery. This allows me to plug the battery into the stand and still see the screen for charge status. It also acts as a stand…

The Weeknd Keychain

🎵 The Weeknd Keychain – Exclusive 3D Model 🎵 Carry The Weeknd's unique style with you wherever you go with this 3D keychain featuring his iconic bust. A detailed and compact design, perfect for printing and showing off anywhere – on your…

Geeknson cup-holder Centre

Cup older for Gwen table. I made it to put in the middle of the table where is the Geeknson logo!

Teknoseyir Anahtarlık

@teknoseyir youtube kanalı videolarında yıllardır masada, sehpada bir şekilde ekranda gördüğümüz o cnc metal logoyu teknoseyirin 14. yaşı adına anahtarlığa çevirdim. teknoseyir kasası ve sanırım o logoyu da hazırlayan ağabeye de buradan…

leknín (Water lily)

Mini leknín do malé tůňky, pítka nebo fontánky, všude tam kde nemůže být pravý. Může sloužit jako pítko pro včelky, motýly a jiný hmyz. Sestavení bez lepení. Mini water lily for a small garden pond as a decoration and drinking place for…

Tekno RC Servo Saver Assembly Block

Got a sweet Tekno RC kit and struggling to assemble your servo saver? Yeah, me too. I just fought that battle and lost. It was "assembled" afterwards, but the nut was cross-threaded and destroyed. Even better, I mangled all the plastic…

Table insert for Teknatool Nova Viking DVR drill press

I recreated inserts for the drill table of my Teknatool Nova Viking DVR drill press. The original insert had some marks from drilling, so I made two versions: one closed like the original, but a few tenths of a millimeter higher to reduce…

TEKNOFEST A2 ROCKET (TEKNOFEST A2 ROKET) DESIGN

Summary 🇹🇷 🇬🇧 TURKISH & ENGLISH DESCRIPTIONS ARE AVAILABLE BELOW DESIGNED FOR AeroTech M1850W MOTOR 📁 FILE MANIFEST (INCLUDED FILES): .step : 3D CAD Model of the Rocket .ork : OpenRocket Simulation File .pdf : Technical Drawing (2D…

Politeknik Gearbox (test)

Amount required is in parenthesis.

Vifteknapp

Vifteknapp for P.G.

Tekno SCT410SL Rear Hub Spacers

One of my nylock nuts came loose somehow and I lost the spacers that come with the rear hub package ( part number TKR6576 ) . This replaces them and they fit like a glove. You will need two of each direction, so either use the 3mf file or…

Solidtekniks Modula Knife Sharpener Mount

I was sent a Solidteknics Modula diamond-faced finger-style knife sharpener I ordered some time ago. You can attach it to a chopping board with a screw to hold it in place - but I wanted to mount it on it's own mount so that it would be…

Multifix Liftknob Hebeknopf Hebescheibe Schnellwechselkassette Quick Change Tool Holder

Anhebehilfe für Multifix Schnellwechsel Werkzeughalter. Einfach die Stellschraube einschrauben. Gewinde M5, passend für Multifix Größe A. Empfehle mit 0,1 mm Layerhöhe zu drucken. Die Scheibe nimmt 5 mm vom Gewinde der Stellschraube weg.…

Für Ständerbohrmaschine Teknatool Nova Viking: Windabweiser Motorkühlluft

Schutzschild vor Kühlluft des Elektromotors, Gesichtsschutz, Luftabweiser

Tekno SCT410 2.0 Rear Mud Flaps Dirty Version

Plážový klip, který se nezalekne větru

„Letní klip, co drží víc než vítr.“ „Malá věc, velká pomoc na pláži.“ „Ručník už neodletí. Ani když fouká.“ „Jednoduché. Funkční. Letní.“ „Klip, který zachrání každý ručník.“ „Drží pevně. Vypadá skvěle.“ „Malý gadget, velký rozdíl.“…

TeknoRC MT48 2.0 - Switch mount

A switch mounting bracket for MT48 2.0. Requires M2.5 or M3 screws (countersunk). Both with and without support

Schiebeknopf Dunstabzugshaube

Ersatz-Schiebeknopf / Regler für Dunstabzugshaube Der originale Schiebeknopf meiner Dunstabzugshaube ist abgebrochen, daher habe ich diesen robusten Ersatz entworfen. Er wird einfach auf den flachen Metall- oder Kunststoffsteg des…

Überbrückung Sicherheitsschalter Teknatool Viking

Mit Hilfe dieses Kurzschluss-Stopfens muss man den lästigen Bohrfutterschutz nicht montieren. Gemacht wurde er für die Teknatool Viking, sollte aber auch an der Voyager funktionieren. Ich habe ihn relativ gross gemacht, damit er stramm…

WEEKND DECORATION

THIS IS A WEEKND DECORATION PEICE I MADE STL FILE is a bit small scale to 76.2mm on x axis to make it palm sized 5% line infill is more then enough printed with PLA

Tekno MT410 Bumper

Print this in TPU with supports under, in the orientation in the file. You can adjust the number of perimeters and infill amount to adjust stiffness, but I used the slicer defaults.

Multifix Liftknob Hebeknopf Hebescheibe Schnellwechselkassette Quick Change Tool Holder

Anhebehilfe für Multifix Schnellwechsel Werkzeughalter. Einfach die Stellschraube einschrauben. Gewinde M5, passend für Multifix Größe A. Empfehle mit 0,1 mm Layerhöhe zu drucken. Die Scheibe nimmt 5 mm vom Gewinde der Stellschraube weg.…

Tekno SCT410 2.0 Rear Mud Flaps Dirty Version

Printed in TPU 95 with 4 walls top and bottom 80% gyroid infill support on build plate only

Tekno SCT air guards

I printed mine with TPU with four wall sides top and bottom at 80% gyroid infill. Stiffens up the entire nerf bar and will last forever.

Tekno SCT410 2.0 Hobby Wing Switch mount

Printed in ABS at 4 walls top and bottom, 40% cubic infill. Fits TIGHT on side guard, will need to short 2.4mm screws for install. Then use double back tape to secure your switch in place. WAY easier for a marshal to locate mid heat!

Tekno SCT410 2.0 Rear Mud Flaps Clean Version

THIS IS A CLEAN VERSION WITH NO WRITTING ON FLAPS. Printed in TPU 95 with 4 walls top and bottom 80% gyroid infill support on build plate only

Tekno EB48 NB48 rear mud guard

Print in TPU, will last forever. Remove if the track loamy/wet as the produce drag

Tekno ET48 NT48 Mud guards

Print in TPU, will last forever. Remove if the track loamy/wet as the produce drag