Liczymy pasujące modele…
Tested for durability on 20+ bikes Share your makes! Works with stock bolts Tested and tried on 20+ bikes Will work on erides and LBX Chain or Belt drive I recommend you print out of PETG and a very high infill, 100 percent is best
GoPro compatible NiteRider Lumina bike light mounts. While PLA may work, this is best printed in a material that can withstand the abuse, like ABS or PETG. There are two models provided, one a bit strong than the other, that is “modified…
If you go to the link https://www.thingiverse.com/thing:3077839 I have generated a simple video on the basics of splitting and seperating files ready to print. just choose ungroup and you will be able to seperate the front piece of the…
complete redesign of the source. Fork crown adapted to RockShox 35 TK Silver installed in the Scott Genius eride. Mounting is done with 2 stainless steel screws 5x10 Print Settings Printer: VORON 2.1 Rafts: Doesn't Matter Supports: Yes…
This is a replacement seatpost mount for a niterider Solas USB taillight. My original mount broke, and I needed a replacement. The clamp is intended for larger seatposts (30.9mm) but will fit smaller posts with rubber shims. Hardware…
Also known as the B-type warbird, or warbird class starship, the D'deridex is a powerhouse of the Romulan Star Empire. One of the largest and most powerful ships in the fleet, it served as the backbone of the Romulan armada during the…
Large bottle holder for Bumbleride strollers. The stock bottle holder is fairly small, this one is designed to hold a 32oz insulated water bottle, but will also hold large cups and bottles. Recommend printing with supports enabled, they…
I have always wanted to mount these NiteRider tail lights on the back of my Topeak rack. The provided seatpost mount is always blocked if I have anything substantial on top of the rack. These are both very popular brands in their…
I took my previous vertical GoPro mount and added the rail system for a Niterider light. The rail uses a friction fit and does not use the small tabs but is plenty secure. Perfect for nighttime mountain biking and recording. Also helps…
My bike with the original mounting bracket got stolen, so I reverse-engineered this so I (and hopefully you) don't have to buy a new light. Most handlebars will use the 31.8mm standard, but there is also a 25.4mm version if necessary.…
Thule FreeRide 15mm axel mount Mounting mountain bike forks with 15mm through axel forks on the Thule freeride bike rack. Holes in mount are made from M6 bolts.
If you own LoneRider Motobags, you probably noticed that the straps - particularly the colored ones - are fading very quickly because of the sun but also because of flapping in the wind. The strap holder provided OEM doesn't hold anything…
KTM Freeride e start button, in case of a broken one unscrew the hole throttle grip and put in the printed one. Attention to the spring and the little steel ball in there. Print Settings Printer Brand: Creality Printer: CR-10S Rafts: No…
Printer: Prusa MINI+. Filament: eSUN PLA+, 100% infill. Printed grinding groove towards the plate with supports only in the groove. The holes print fine without supports. Additional parts needed : Hollow and threaded axles to screw the…
High-performance air filter for KTM Freeride
Remixed Kempgrafiks helmet so I could print it in different colors and changed size to use it for RC Skeeride driver. Print Settings Printer: Ender 3 v2 Rafts: No Supports: Yes Notes: Use supports for visor and glasses. Category: R/C…
An insert for using longer screw with Thule FreeRide roof top bike rack. The rack cannot hold bikes with wide frames such as e-bikes. The insert makes it possible to replace the T shaped screw with a longer M8 screw to hold a slightly…
This clip replaces the original clip on the back of NiteRider Vmax (and possibly other) tail lights, making them compatible with Planet Bike light mounts. I made this because I have many Planet Bike rear lights, and all my family's bikes…
i made this model for a science project and i based it off of a photo i had in my textbook so you can probably see the same photo on the internet, if thats the case tell me and i'll give full credit to the original maker :) . *Note: i…
These are shims for the ATK freeride spacers with a single screw. At this point I believe all newer versions have 2 screws and are not compatible with this shim. If you have an older freeride spacer and need more shims, this file should…
A tool to easily stack two or more Thule Freeride 532 (and possibly other models) on top of eachother.
This bracket enables you to mount a rear blinky on a Blackburn EX-1 or EX-2 bike cargo rack. Zip ties are sufficient but I recommend using glue (E6000) also. I have tested it on the NiteRider Solas and the CygoLite Hotshot
This is a latch style mount to attach the NiteRider Lumina lights to a GoPro style mount. The latch door screws down once the mount is slid into the light body, securing it into the slot so it cannot come loose. I have uploaded two…
My toddler pulled the button out of my Niterider Solas and lost the part. I printed this in black Ninjaflex. It was a little tricky to print correctly- I had to play with the print settings to get the part to resolve properly and not turn…
This is a replacement for the stock fabric/webbing/Velcro strap that comes installed on Fluid Freeride Mosquito scooters. It is a clamshell design consisting of 2 pieces that “clamp” around the base of the stem of the scooter, just above…
If you want a break with your FPV Freerider training with TX Spektrum DX7 ... you need stand :) Print Settings Printer Brand: RepRap Printer: DIM200 Rafts: Doesn't Matter Supports: Yes Resolution: 0,3 - 0,4 Infill: 10% Notes: I made it…
Thule OutRide 561 wall mount maby it fits too FastRide and OneRide
Adaptador para Bici Trek Fuel ex8 del año 2008 con sillita WeeRide. Debido a la conicidad de la parte delantera del cuadro fue necesario diseñar una pieza que encajase perfectamente con la figura de la bici.
About Crocs LiteRide fix for the heel strap I stepped on the shoe incorrectly and crushed pins and the sockets in the heel strap. Why not to print it horizontally so it is stronger? When printed vertically it will get lower strength -…
included .step file in case you need to make any improvements/changes
This is a ‘quick lift’ handle that installs on the upper stem of the Fluid Freeride Mosquito scooter. Intended use is to aid in quickly picking up the scooter from the stem to navigate stairs, curbs, gaps, etc, without needing to collapse…
External Part needed: SKS Konus 2.0 Set (MPN: 11776) and Rubber Band Use normal rubber band doubled to keep it together while mounting Print 3 times with support in ABS or PETG with 50%+ infill
SIGMA Cuberider II Lamp Bracket for ROSE - Sattelstützträger SPR III A bracket for the SIGMA Cuberider II rear light for mounting on the ROSE - Seat Post Carrier SPR III. Fittings 4x Round-head screw M5 x 12 mm 4x Screws nut M5 8x Washers…
Ersatz Halterung für die Philips SafeRide 80 Lux LED Fahrrad Lampe.
So I created small bracket, which holds it in place. Fits nicely to the frame. One M5 Bolt and nut is required. Printed with PM ASA. Needs supports.
THIS MODEL IS FOR PERSONAL USE ONLY AND THE USER ASSUMES ALL RESPONSIBILITY, INCLUDING BUT NOT LIMITED TO PERSONAL INJURY AND/OR DEATH. BE AWARE THAT IT MAY CHANGE THE RELEASE CHARACTERISTICS OF YOUR BINDINGS AND I AM NOT RESPONSIBLE FOR…
This is a replacement spacer for the stock freeride spacer for the ATK Freeraider bindings. Current model does not identically mimic the original design, but it does fit and work. Model is set to 2.2mm in height, scale appropriately for…
Print face down with supports on built plate. Uses 2x M4x12mm screws, washers, bolts to secure it along with the original included hardware.
I still use several older Thule FreeRide roof bike carriers. While they work perfectly, they were originally designed in an era when 26-inch bikes were the norm. Modern 29-inch mountain bikes, especially in L and XL frame sizes, are…
Included are models for the Carrier Plate, Riser, and Adapter plates. STEP and F3D available for easy modification. Additional hardware required: Attaching adapters to carrier platform: (4) 1/4-20 * 2.5" Carriage bolts (4) 1/4-20 Nyloc…
I created a foot pad to fit at the end of the leg of my HESPERIDE MODULA chairs, because this chair is design for outdoor use, and the original pads are not properly resting horizontally and they are damaging my inside flooring. Therefore…
Latch for battery cover for eride pro ss 2.0 it may work with other versions of the eride pro works with PLA but recommend PETG I was unable to find a replacement online so I created this one
this is a custom Eride pro keychain please ask in comments for retail sale or questions enjoy!!!!!!!!!!!!!!!!!!!!!!!!
i made this model for a science project and i based it off of a photo i had in my textbook so you can probably see the same photo on the internet, if thats the case tell me and i'll give full credit to the original maker :) . *Note: i…
I wanted some tracks for my TRX-4, I have tried the official Traxxas ones and i was disappointed by their performances in the snow. I had built a Skeeride 2 From BuildItBetter and the track on this little sled works so great, I wanted to…
Latch for battery cover for eride pro ss 2.0 it may work with other versions of the eride pro works with PLA but recommend PETG I was unable to find a replacement online so I created this one
this is a custom Eride pro keychain please ask in comments for retail sale or questions enjoy!!!!!!!!!!!!!!!!!!!!!!!!
Cable holder for VARIdesk, using it on a Pro Plus 30. tie one side with a ribbon, tie on the table the other side. And you have a nice cable tension relief when you move the desk up and down. Attaching repaired obj file, and stl that is…
