Liczymy pasujące modele…
A sealable case for the NodeMCU ESP8266. Mounting screws hold in place while the lid snaps tightly on top and wont come off easily. This can be used standalone or as part of a larger project or design. This thing was made with Tinkercad.…
The raspicamcover_nolense model from Articulating Raspberry Pi Camera Mount ( https://www.prusaprinters.org/prints/3407 ) did not fit my Raspberry Pi Camera 2 (rev 1.3). The lens hole was about 0.045" (1.14mm) lower and would not align…
2020 Connector 4-Way Corner Bracket _Profile 2020 Experimental Rev1 30/05/2025 Update: added 4_Way_Corner RV1.stl Cleaned up geometries for improved accuracy and performance. Fixed functional aspects of the project to enhance usability…
This 3D model is designed to provide a convenient and organized storage solution for your Meta Quest 3 VR headset and controllers. It is specifically crafted to attach to IKEA's Skadis pegboard, allowing you to maximize your space while…
To find out about this tool and the project then go to it's homepage on my website https://www.barras-blades.com/mcrideline If you want to contribute to the project or ask questions then join the facebook group…
Holder Bar Clamp GPS/Devices Customizable - for Ø12-14-22 mm Bar Dimensional data: 60x60mm (18+18mm) 4 Holes M5 18 Holes M4 Update: 18/08/2025 Added Rev1 Models
I bought the Eachine EV100 FPV goggles as my first goggles but they really didn't fit my big head, no matter how I adjusted the PID it would still blur the outside edges. I found the replacement shell from Lichy but honestly nothing fit…
Changes allows to use aluminum spacers from original kit. BOM: m3x8 to reach aluminum spacers. Printing: Voron instruction specific.
OrangePi 4A simple case with place for 4010 fan and additional space for nvmes passive cooling in the bottom. orangepi_4a_case.zip contains .par files for SolidEdge.
Descripción This is a new version of watch movement holder. In this version it can be adjusted according to the diameter of the movement, it also has a bidirectional rotation and an internal spring allows the desired position to be fixed.…
This is a remix of the original clip with fixed dimensions, so it fits the remote snugly. Print settings don't matter all that much for this object, but for what it's worth I used 15% infill with a layer height of 0.2mm for my print.…
NEW VERSION! This is the first rough draft for a custom back plate and spacer for the New 3DS XL that allows for the use of a 5000mAh New Li-ion E which can be found on amazon, ebay, or aliexpress. This is the first draft of this project…
Keycapsss was out of stock of their case so I ended up printing one my self instead of waiting. All you will need is 10 M2 x 8mm screws. I've used metric ones that were lying around, with a little pressure this give a nice tight fit.…
Ich musste mir ein Ersatzteil erstellen, war leider bei Lieferung defekt. Es müssen nur noch die Gewindehülsen eingesetzt werden und dann passt das Ding wie original. Material Nylon PA12+CF15
This is the updated version of the previously uploaded turbine blade. The airfoil's curve is slightly more sophisticated this time. Also the new root is symmetrical. Hope You Enjoy!
you will need x2 m3 screws
This is a remix of that_grain's keyboard case that is adapted for low profile switches and keycaps.
AtreuSLB50Plus / AtreuSLB50+ rev1 Finally I had the time to wrap up my little side project started about three months ago, and I thought to share it here. Although inspired by the Atreus, I couldn't quite find the right compromise among…
I wanted a simple, semi weatherproof camera housing for an RPI/MotionEye camera.this one uses a minimum of fasteners. I made a bulkhead USB to microUSB cable for power, but a a microUSB connector (to mate up with the RPI) will fit easily…
Simple lightweight clip to mount the Eachine EV100 Micro AV Recorder to a 19mm strap of the Eachine EV100 FPV goggles. Print Settings Printer: PrintBucket 500 Rafts: No Supports: No Resolution: 0,2 mm Infill: 100 % Notes: Printed with…
I wanted to add some tracking functionality to my E-Scooter, and since I have an AirTag, that seemed like a good idea, so I looked for a design to help me get started. I took https://www.thingiverse.com/thing:4836701 as an inspiration and…
A fun storage box with a locking lid that requires a 3 digit combination to unlock. The lid functions as a standard dial combination lock that you can set the code for yourself during assembly. The only non-printed parts that are required…
My take on fitting an ECAS collet on the Sherpa Mini (R2 Rev1). The others available on here had weird slicing artifacts, holes in the STEP/walls too thin, or stuck out from the top & had a filament sensor. I didn't want any of those…
This is my version for the enclosures with faceplates for the Breeze Keyboard (included GUST macro pad) from afternoonlabs.com, it uses: 7x M3 screws 4mm for the PCB 8 10mm for the faceplates. The SVG EPS, AI and DXF files is to laser cut…
Use this to install new pintle caps on the injectors. It protects the pintle cap, and has a hole in the middle so you don't accidentally hit the end of the injector. Just slip the new pintle cap onto the end of the injector, slide the…
JeegVa44 ErgoZero rev1 My second keyboard designed from scratch, this time split. I wanted a portable split keyboard with a gentle vertical stagger, sixth column available and four thumb keys. I also wanted to learn more about proper CAD…
What was done : more space for any j-head/E3D hotend (clones accepted). 30mm fan arm converted to 40mm. strenghten up the part (the "wall") that is going to be screwed to the x-carriage. Todos : Find a way to make room for any drive gear…
Here's my Eachine Pro58 Receiver Case for the Eachine EV100. I was inspired to do this because of the mod video of "Drone Mesh", thanks man for the nice mod vid, how to solder in the receiver. Worked great for me.…
See new model below that solves the issue of the slot wearing out over time allowing SD Cards to fall out. Improved updated version: https://www.printables.com/model/1194804-anbernic-rg35xxsp-sd-card-holder-rev20
bushing to hold injector connectors to the plastic rail, to replace any missing or broken stock ones. Made for m54 / m52tu, might fit others that use a similar design. Printed in TPU for the flexibility, and tpu deals pretty well with heat.
This is a mount so you can use the supplied steering lock on a flat surface. Print Settings Rafts: No Supports: No Infill: 90-100% Category: Other
Modules to mount connectors onto the case in case of handwiring: TRRS connector Micro USB breakout USB-C breakout (the breakout collides with Amoeba PCBs if used together, so this needs some re-work - or a deeper case) A blank cover for…
COFFEE MEASURING MEASURER TAMPER height 135mm, I needed a smaller height than those on sale
WTF?: This 3D model is a masterpiece, elegantly integrating a macro lens camera, its cable, and an LED light plugged into the Prusa Mini/Mini+ USB-A port with simplicity and perfection. BOM: 1.Camera: Following one is suitable. Pibiger 8M…
Open source case files for the Revolt keyboard . All the files use m3x3x4.5od heat inserts.Open source case files for the Revolt keyboard. All the files use m3x3x4.5od heat inserts. The hands case(s) are compatible with PCB rev.3 and…
Replacement Water-proof charging Plug Cover for a EV10k Pro Abe i printed out of TPU. to mount it i removed the bottom cover of the scooter, unplugged the charge port and loosened the nut that held the port. then i slid it over the charge…
Removed the conical ends from the foam cavity, to prevent filament squeak and squeeze as the foam was being pulled into the cone. Adjusted the thread slightly for a looser fit. Printed in Pokemon color scheme.
you will need you will need: 2 bolts M5x10 or M5x12 2 nito nuts M5
this is a simple stand that will hold a xbox controller and two AA battery's. No need for print supports.
I tried to reuse the MagSafe magnetic phone holder ( https://www.amazon.com/dp/B0DGL4R6YS?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 ) that I used in my 2016 Audi Q3, which was mounted in the CD player slot. However, the Haval PHEV19 does not…
This is a side mount for the FLSUN QQ-S/ Pro extruder. This moves the extruder closer to the bed, allowing the bowden tube to be shortened, and improving (reducing) retraction. With this mod the bowden tube is roughly half as long, and I…
Not tested! Print at you own risk! Relaxed the latch fit to make is a bit easier to install.
This is the OpenSCAD code that was used to make the above clip for holding the filament runout sensor from ebay. Rev2: https://www.thingiverse.com/thing:4318121 - This version mount to the extruder motor instead. Configuration that worked…
Saru48W+ rev1 My third keyboard designed from scratch, this time with Bluetooth connectivity. I wanted a more compact portable keyboard with Bluetooth connectivity and an encoder. Different MCU, different firmware. Components: 1x…
black+decker bhfev182c2 nozzle replacement A basic nozzle for my vacuum after I lost the one it comes with designed to be eighter in PLA or stiff TPU I also included the mesh of the part that connects to the vacuum so anyone can use it to…
Geometric Design - This is a set of three modern vases that have been constructed with a geometric design. These vases can be used to decorate your home with any flowers or plants. The simple yet elegant design with a striped pattern…
+stabilization to the "fingers" +changed thickness of the "disk" +changed holes (disk) to slots
