Wyniki wyszukiwania: extremely

Small Whistle: extremely loud

Small whistle for keychain, backpacks and other daily or safety equipment.

Tiny Whistle - Extremely Loud

Introducing the smallest and most powerful whistle! Print it out and annoy your friends and neighbors!

Mini Whistle – Extremely Loud (115dB) – 1.5g Edition

This Mini Whistle – Extremely Loud (115dB) – 1.5g Edition is a slightly larger, sturdier version of the original mini whistle, still small enough to disappear on a keyring. Weighing in at 1.5 grams , it prints quickly and comes off the…

Extremely loud and compact emergency whistle

Rock-Solid and lightweight emergency whistle. Two chamber design. Painful loud. Print Settings Printer: Anycubic I3 Mega Rafts: No Supports: No Resolution: 0.2 mm Infill: 20% Notes: Print on its side (as it is in the stl-file) without…

SW Millenium Falcon Extremely Detailed

I stumbled across this awesomely detailed Millenium Falcon surfing the net one night. I believe it was extracted from a game, as it was in some obscure file format. I've tried my best to convert it here in a couple of file formats. But it…

Backpacking Whistle - Extremely Loud

It is not easy to find to buy a good Emergency Whistle for Outdoor Survival so I made my own Extremely Powerful Whistle ! You can use for your safety to scare animals or in case of emergency, have an awesome adventure and leave no trace.…

Extremely Satisfying Fidget Clicker Wheel

What makes it special This wheel started as a prototype, and four out of the five prints I did worked. I plan to make another model like this one, but this version already prints easily and has no complex settings, which is part of why I…

Extremely loud and compact emergency whistle

https://www.thingiverse.com/thing:2933021

EXTREMELY LIGHT Gridfinity Baseplate (Parametric)

I made some thin baseplates that save a ton of time and filament. The models I have included are shelled out at 0.8mm. I have included a parametric file for Fusion 360 - you can make any size grid and change the shell thickness. If you…

EXTREMELY LIGHT Gridfinity Baseplate (Parametric) with Bridging Support

Added bridging supports at the intersections of Doug Kremer's EXTREMELY LIGHT Gridfinity Baseplate (Parametric). This fixes the drooping seen in the 3rd picture. For the Fusion360 file, change the size of the grid with: Update Row and…

Extremely frightening Halloween pumpkin! Illuminated eyes and mouth with LEDs

Ultra-Scary Halloween Pumpkin! Instructions and Assembly: Print with tree supports. Note that the supports inside the mouth are quite difficult to remove; take your time and do it piece by piece, being careful not to damage the teeth. The…

Parametric memory card holder / case (SD, MicroSD and others), extremely compact and lightweight, with FreeCAD source.

Purpose. I'm quite satisfied with the C001 Micro SD card holder and case at home but I found that it is too big and heavy for bike touring trips where small size and weight are really important. So I designed an extremely slim and compact…

Extremely High Poly CUBE

The high poly count cube is a meticulously detailed 3D model composed of over 1.5 million vertices, making it incredibly intricate and visually stunning. Each vertex contributes to the overall complexity and smoothness of the cube's…

Extremely Flat Picatinny Riser

Remixed the original file. I made it as flat as possible, many attachments might not even fit. I made it so I could use my red dot sight with iron sights at the same time. Category: Sport & Outdoors

Extremely efficient wine rack

I was disappointed with commercially available wine racks and with the other wine racks on Printables. I don't know if this is the most efficient wine rack - but I do know that it is extremely efficient. It is ideal stacking of circles…

Extremely simple wall mounted filament holder V2

Version 2.0 of my filament holder. reduced material usage of about 40% of the original. Stronger design and faster printing. This is just a simple wall mounted spool holder. Designed to be screwed to a wall with recessed holes for screws…

Extremely Smooth 6, 10, 15, and 20 mm Marbles

Supports: On Brim: On Infill: Depends on what you are using the marble for.

Extremely Fast Miniature Bases with 5mm x 2mm Magnet Holes

These are some very fast bases, perfect for anything that needs a base quick! Let me know if there is a base size or magnet size that could be helpful, and I will happily add them.

3g Extremely minimalist eyeglass holder

Print in vase mode

Extremely inexpensive stringing test

This is a very simple, inexpensive, and fast-to-print stringing test. It takes 3-4 minutes to print with a printing speed of 70 mm/s and a travel speed of 175 mm/s. The gab is about 3 cm wide. As a bonus, here are my retraction settings…

Extremely Strong Samsung Soundbar Holder

Made to mount my 2016 Samsung Sound Bar behind my new TV, and ran some Fusion tests on it, and turns out it can support upwards of 15 pounds when mounted properly. I recommend using two for redundancy and to support it better, but you…

EXTREMELY LIGHT Gridfinity Baseplate, odd sizes

5x1.83: used with 49cm drawers with two 5x5 // 5x2.96: used with 32.5cm drawers with a 5x5 2.96x1.83 for corner

Extremely loud whistle with letters PUMPAJ

Extremely loud whistle with letters PUMPAJ

Extremely Comfortable Finger Chopsticks

PLA 0.2 9g 30m

Extremely Practical Printable Shelf (EPPS)

This is part of my Extremely Practical Prints series. I wanted somewhere to store my prints which required little to no effort to put together. It is recommended that you print this in ABS. On a Voron 2.4 350mm, this will take about ~3…

Extremely resistant support for painting and pouring. Stackable

A stand design for my mom. She uses for painting and pouring. Keeps canvas flat. No supports. 8 cm tall. If you print and you like it , please like.

Extremely loud 2-color whistle

Two versions of extremely loud 2-color whistles.

Herb Dryer (Extremely fast)

This is an herb dryer powered by a fan that I created. My grandma and aunt grow herbs in each of their backyards, but to use them, they have to dry them. this involves hanging the herbs up by string from a hook, or any other method of air…

Extrem kurze Druckzeit // Rollverschluss mit Clip - Extremely short printing time // Roll-top closure with Clip

(DE) Der Rollverschluss mit Clip ist in sehr kurzer Zeit zu drucken (ca. 10 min bei 0,2mm Layer) Wenn die Tüte oder der Beutel zu breit ist, dann einfach die Tüte auf die Hälfte zusammenfalten. Die Funktion ist folgende: In die Nut des…

chess board (but extremely fancy)

it is printed in 2 equal parts, that you will have to glue together with the middle-brick.

extremely simple spool holder stand

as a professional mechanic engineers have a knack for making my life harder by over complicating even the simplest of tasks. I just wanted a simple, cheap to make, quick to print, crude, spool stand to keep my ever growing collection of…

EXTREMELY LIGHT Gridfinity Baseplate (Parametric) with Bridging Support EVERYWHERE

This design adds supports to the corners and edges too, to improve reliability

Extremely simple wall mounted filament holder

This is just a simple wall mounted spool holder. Designed to be screwed to a wall with recessed holes for screws Prints without support Contains stl with and without logo Version 2.0 can be found here Uses 40% less material and overall…

Extremely simple wall mounted filament holder V2/ HOUSTON ASTROS REMIX

40% infill no supports necessary

#1 Parametric Fullcontrol gridfinity baseplates (Extremely light)

Python code to create custom Gcode for Gridfinity baseplates of any size or tolerance. Home manually before print.

Extremely-Minimal Google Home Mini Stand

Just big enough to work! Print as shown in the second image. 34 minutes for me! Update: Added a version that tips the Mini back 10°. It should print in less than 30 minutes. Print Settings Rafts: Doesn't Matter Supports: Yes Category:…

Extremely cursed benchy

I accidentally did this in blender, it might crash something. It measures 27x15x1m.

Shelf Stand for extremely intelligent and successfully People

SHELF STAND How to install it: You need a drilling machine with an 8-9mm drill. U have to drill 3 holes at a distance of 130mm. (about 12mm deep for a snuggy fit.) Just Put the shelf on the Stand (maybe needs a few punches). It stands…

Extremely simple wall mounted filament holder w/ Prusa Research Logo

Waiting for the day Prusa Research releases a spool holder? Well the amazing researchers at prusa reasearch have not been given enough gummy bears to make one yet, so this will have to suffice! Original design by MMDK, thought the no-logo…

WIND CHIME « Extremely Wireframe»

WIND CHIME “Extremely Wireframe” I took part in the “Wind Chimes” competition in May 2026, where I came 7th. But whilst I was modelling the project, I had another version of the model in mind. I used Blender’s “wireframe” modifier, which…

Extremely Fat Obese Version Of Charizard Pokemon Figurine 3D Printable

Detailed 3D printable Extremely Fat Obese Version Of Charizard Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

ESMF - Extremely Satisfying Magnetic Fidget Slider

A tiny keychain slider, based on two 12x2mm magnets embedded in the design.

(Near Useless) Extremely Tight Friction Fit Ironsights

Extremely tight fit. Will need filing. Not flip up. No adjustment. Just funny simple ironsights!

Extremely Simple Speed Square V1

Simple enough. This is Extremely Simple Speed Square V1. Just a basic speed square for basic applications.

Extremely Simple 18650 Battery Holder with slots for contacts

Extremely Simple 18650 Battery Holder with slots for contacts

extremely loud 2 toned whistle - this is not a toy

a 2 toned whistle that I have not measured the loudness or frequency of although I think it is around 4khz. it is deafeningly loud, it can cause permanent hearing damage even barely blowing it.

Extremely Practical Printable Nest Shelf (EPPNS)

I have grown tired of printing shelves that waste plastic or take a long time to print. This design from my Extremely Practical series balances the strength and low-density requirements of the price anxious. Featuring a nest style with…

Spool Stack - Extremely Challenging Balancing Game

Summary: Spool Stack is a challenging stacking game for those with careful, steady hands. So are you ready for a challenge? Then this is the perfect game for you! You need really steady hands because the base is wobbly and the spools have…

Extremely simple filament holder Austin FC edition

with close to 20 rolls of filament Im on a spree of incorporating the logos of my favorite sports teams

Extremely rough draft of EP-1 gen 1 mod

This is serious trial-and-error fix to the brilliant model by The Stock Pot for ceiling mounting the 1st generation EP1

Extremely painful Nerf dart replacement tip

Extremely simple hat holder!!!!!!!!!!!

Use supports for best results.

Flange Base for Extremely Specific Mini Blow Torch

I got a cheap mini butane blow torch off Amazon that is pretty great in every way, except the base is narrow, so it has a tendency to tip over. I've mitigated this by making a flanged base that screws onto the knurling of the grip. I've…

An extremely low-poly Benchy

Supports: On (For underneath the top front of the cabin) Brim: Off Infill: 15-30%

Extremely Small Buggy

An extremely small version of my original buggy.

EXTREMELY short print time carpenter's slide-together setsquare (15 minutes!)

Just slide part 2 onto the bottom of part one and tap together with a small hammer, a tape measure, or even a set of calipers!

Extremely Muscular Steroid Bodybuilder Version Of Charizard Pokemon Figurine 3D Printable

Detailed 3D printable Extremely Muscular Steroid Bodybuilder Version Of Charizard Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid…

Extremely Muscular Steroid Bodybuilder Version Of Gengar Pokemon Figurine 3D Printable

Detailed 3D printable Extremely Muscular Steroid Bodybuilder Version Of Gengar Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid…

Extremely Fat Obese Version Of Venusaur Pokemon Figurine 3D Printable

Detailed 3D printable Extremely Fat Obese Version Of Venusaur Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

Extremely Specific Extruder Nozzle Index

I bought inexpensive E3D-V5 nozzles from Amazon (B07WPK92PK) They were bagged and stuffed in a tiny plastic box - unacceptable I designed an index insert for the tiny disorganized plastic box. Now it is a tiny organized box, my OCD is…

Extremely simple filament Holder rockets edition

I combined this very simple filament holder with the Houston rockets nba logo

Octupus with a extremely tall hat

looks like he has to lead the union in war

Extremely Simple Rocket

This is a simple rocket made from some of the most basic shapes there are.

Extremely Rugged Screw-Together Phone Case for Samsung Galaxy A52 (PLA, M2 or M3 screws)

Most phone cases on Printables are designed for TPU. I didn't have any, so I made a rugged case for the Samsung Galaxy A52 that prints in PLA instead. How it works Since PLA isn't flexible enough to snap around the phone, the case is a…

EXTREMELY SMALL QUADRUPLE DECKER BUGGY MADE FROM SCRATCH YOU SHOULD DOWNLOAD MAX CHARACTER LIMIT

EXTREMELY SMALL QUADRUPLE DECKER BUGGY FROM SCRATCH DOWNLOAD NOW ONLY 999$

EXTREMELY SMALL QUADRUPLE DECKER HOLIDAY BUGGY MAX CHARACTER LIMIT

AN\ EXTREMELY SMALL QUADRUPLE DECKER BUGGY HOLIDAY EDITION

Extremely Lazy Printer Stand

This is not a refined design. This is four printed bricks of filament whose sole purpose is to lift something. A stand lifts things. These lift a printer. That’s the entire design brief. The STL contains all four pieces , because I…

An EXTREMELY Tall Benchy

An EXTREMELY Tall Benchy for when you want a TALL Benchy

Extremely Simple Hook

Not the greatest design, but it works. Just add double-coated tape.

Display container for Extremely loud and compact emergency whistle

I made a little of whistles and am sharing them in the office Extremely loud and compact emergency whistle by @Peter_260424 Whistles are loud and look pretty good, so It needed a stand that fits them Print using your default settings. No…

Extremely Fat Obese Version Of Eevee Pokemon Figurine 3D Printable

Detailed 3D printable Extremely Fat Obese Version Of Eevee Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

Extremely Buff Cat Flexing In Mirror Figurine 3D Printable

Detailed 3D printable Extremely Buff Cat Flexing In Mirror figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

Extremely Muscular Unicorn Bodybuilder Figurine 3D Printable

Detailed 3D printable Extremely Muscular Unicorn Bodybuilder figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

Extremely Fat Obese Version Of Rayquaza Pokemon Figurine 3D Printable

Detailed 3D printable Extremely Fat Obese Version Of Rayquaza Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

Heavy-Duty Shelf Bracket (Extremely Strong & Tested)

Description Heavy-duty, custom-designed shelf bracket engineered for maximum strength and stability. As seen in my setup holding heavy filament rolls, these brackets are incredibly robust and reliable. Recommended Print Settings:…

BUTTER KNIFE REPLICA OF WESN ALLMAN KNIFE ( EXTREMELY DULL)

PRINTED MINE IN PLA 15%INFILL GYROID Print with blade edge up like in picture for best results and strength

Extremely Muscular Steroid Bodybuilder Version Of Shuckle Pokemon Figurine 3D Printable

Detailed 3D printable Extremely Muscular Steroid Bodybuilder Version Of Shuckle Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid…

Extremely Strong Simrig Soundbar Holder

Recommended print settings Print on its side, because that significantly reduces the time it takes to print, and also cuts down on cost. Infill: No less than 20%, Gyroid highly encouraged Rafts: None Brim: None Supports: Yes Material:…

Extremely Grumpy Angry Cat With Furrowed Brows Figurine 3D Printable

Detailed 3D printable Extremely Grumpy Angry Cat With Furrowed Brows figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

Extremely Fat Obese Version Of Snorlax Pokemon Figurine 3D Printable

Detailed 3D printable Extremely Fat Obese Version Of Snorlax Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

Extremely Muscular Buff Chicken Figurine 3D Printable

Detailed 3D printable Extremely Muscular Buff Chicken figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

Extremely Muscular Steroid Bodybuilder Frog Figurine 3D Printable

Detailed 3D printable Extremely Muscular Steroid Bodybuilder Frog figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

Extremely Muscular Steroid Bodybuilder Rabbit Bunny Figurine 3D Printable

Detailed 3D printable Extremely Muscular Steroid Bodybuilder Rabbit Bunny figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

Extremely Muscular Steroid Bodybuilder Version Of Eevee Pokemon Figurine 3D Printable

Detailed 3D printable Extremely Muscular Steroid Bodybuilder Version Of Eevee Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon…

Extremely Muscular Steroid Bodybuilder Version Of Mewtwo Pokemon Figurine 3D Printable

Detailed 3D printable Extremely Muscular Steroid Bodybuilder Version Of Mewtwo Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid…

Extremely Muscular Steroid Bodybuilder Yellow Duckling Figurine 3D Printable

Detailed 3D printable Extremely Muscular Steroid Bodybuilder Yellow Duckling figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

Extremely Fat Pug In Tiny Superhero Cape Figurine 3D Printable

Detailed 3D printable Extremely Fat Pug In Tiny Superhero Cape figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

Extremely Muscular Buff Shiba Inu Dog Bodybuilder Figurine 3D Printable

Detailed 3D printable Extremely Muscular Buff Shiba Inu Dog Bodybuilder figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon license:…

Extremely Muscular Steroid Bodybuilder Version Of Deoxys Pokemon Figurine 3D Printable

Detailed 3D printable Extremely Muscular Steroid Bodybuilder Version Of Deoxys Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid…

Extremely Muscular Steroid Bodybuilder Version Of Greninja Pokemon Figurine 3D Printable

Detailed 3D printable Extremely Muscular Steroid Bodybuilder Version Of Greninja Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid…

Extremely Muscular Steroid Bodybuilder Version Of Gardevoir Pokemon Figurine 3D Printable

Detailed 3D printable Extremely Muscular Steroid Bodybuilder Version Of Gardevoir Pokemon figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid…

Extremely low poly HEINS ketchup

It has to be heins

(Near Useless) Extremely Tight Friction Fit Ironsights

Extremely tight fit. Will need filing. Not flip up. No adjustment. Just funny simple ironsights!

Extremely loud 2-color whistle

Two versions of extremely loud 2-color whistles.

Extremely Lazy Printer Stand

This is not a refined design. This is four printed bricks of filament whose sole purpose is to lift something. A stand lifts things. These lift a printer. That’s the entire design brief. The STL contains all four pieces , because I…

An EXTREMELY Tall Benchy

An EXTREMELY Tall Benchy for when you want a TALL Benchy

An extremely low-poly Benchy

Supports: On (For underneath the top front of the cabin) Brim: Off Infill: 15-30%

Extremely Comfortable Finger Chopsticks

PLA 0.2 9g 30m