9609 modeli
July 27 2022 house keeping note: Somehow, reviews and makes for the older version of this fan duct have been showing up on this page, and reviews and makes for this updated version were showing up on the old versions page as well. To…
Wydruk około 2,01 €–2,46 € nettoWstępna wycena jednego wariantu
Inspired by Mikolas Zuza Link: https://www.prusaprinters.org/prints/10-extruder-rotation-vizualizer What you need: Super Glue 8x3mm Neodymium Magnet 3D printed Visualizer Montage: Just glue the magnet correctly in the center of the circle…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
A zip tie cable clip for insertion into 2020 aluminium extrusion. There are quite a few options in around but none quite like what I wanted. Printed with PETG since they require some force to insert (so that they sit solidly in the…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
(for Bambu, check below) Please like, share, download and all the amazing good stuff! Since this is my final model in my "Single Extruder - Dual Color" series where I managed to put 3 colors together into one model! Not counting the…
Wydruk około 1,31 €–1,60 € nettoWstępna wycena jednego wariantu
Size: 61mm x 47mm x 42mm Filaments: PLA Prusa Orange (orange) and PLA Vanila White (white) Note: All parts need to be glued.
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Test the maximum printing speed of your extrusion system! The model can be scaled in X and Y to fit your buildplate. There is a small notch every 2 mm to indicate a speed change. GUIDE Load, orient and scale the part to your liking Enable…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update (July 13th, 2022) After receiving feedback about mounting the shield and the occasional break, I have decided to strengthen a few parts of the design to prevent breaking during support removal, slipping off the left mounting point,…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This handy little piece turns a regular M3 nut into a T-nut that fits into a 2020 / 2040 extrusion ( e.g. Ender 3 frame ) in order to attach anything. Some pictures show an original Ender 3 M4 T-nut for comparison. Prints best with no…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
This is a small clip for the extruder cable. I was not satisfied by less fixing of the extruder cable of my i3 mk3s. The textile cable sleeve easily gets out of the original clamp and then the cable slack rubs the printing bed slightly.…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Also see our Latest Project Launching on Kickstarter 30th April 2023 https://www.kickstarter.com/projects/fizzychickens/3d-printable-antikythera-mechanism Remix of Three Ducks in a Bear Suit Pen Plotter Requires 2 x M3 Bolts (To hold Pen…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
EDIT: I forgot to add in the name kindly given to my cat by Mark "Velocity Painting" Wheadon ( https://t.co/LF6wu0B4sd ): Schrodinky! A couple of weeks ago, I posted a very cute picture on Twitter of a British Shorthair kitten sitting in…
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest models:…
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
Because changing nozzles with the supplied multi-tool was too wobbly for me, I developed a simple tool to hold the hotend more stable. As can be seen in the CAD image in cross-section, the tool is designed in such a way that the hotend…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
What colors will you choose? Ever since I designed the dual color cow I really wanted to make a poison dart / tree frog version, but none of the available 3D models were suited for this operation. In the end I decided to try and model my…
Wydruk około 1,78 €–2,17 € nettoWstępna wycena jednego wariantu
Update : there is now a version that can be mounted on the X carriage of the Prusa Mini :) Hi !! I'm a jeweler and use my beloved prusa MK3s to design invented custom tools for my craft. The visualizer challenge, encouraged me to create…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
I suppose that this stl may be useful to other n4 users also. This is ment to be a temporary fix. Mine extruder lever broke apart just after only a few filament changes. If your extruder starts to make clicking noises during the print, it…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a Flow Rate Calibration Test specifically designed for PrusaSlicer , as it does not support per-object settings. These models are optimized to use as little filament as possible while still providing accurate results. There are…
Wydruk około 0,44 €–0,53 € nettoWstępna wycena jednego wariantu
To add the filament profile to Bambu Studio, follow these steps: 1. Download the .zip archive - the .gcode file is empty and can be ignored 2. Extract .json file from zip archive 3. Open Bambu Studio 4. Go to File →import→import…
Wydruk około 3,26 €–3,98 € nettoWstępna wycena jednego wariantu
This is a little extruder indicator in the shape of a modern wind turbine. I was inspired by the Dutch-style windmill extruder indicators in Prusa's video here: To attach to your motor, you will need either two 8 x 3 mm disk magnets or a…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is version 2 (V2) of the Delta-P fan duct for BEAR. It has several updates compared to the original: Easier to print Better cooling Refined flow path CFD optimized Even cooling front to back and left to right Improved visibility of…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
This was designed to be used with a cylindrical magnet (8mm diameter by 10mm long) This is a press fit, no glue is required... Print instructions 200 microns works fine !
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
MK3 Stealthburner V0.5 This is my Stealthburner case mod for the original mk3s+ extruder. Note that this is only a design upgrade and the upper ‘fan’ is actually a extruder visualizer (I may also do a version with an active fan in the…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
This is a remix/redesign of the T-slot extrusion covers by MegardStudio that was featured on the Voidstar Labs video of prints for your printer . After printing out the full plate, I found the pieces were exceptionally difficult to snap…
Wydruk około 1,75 €–2,13 € nettoWstępna wycena jednego wariantu
If you want a completely SILENT printer, print this and see bellow for TPU LCD panel support. Vibration dampers. Reduce noise and vibrations. This is the most functional design I could find or imagine based on existing models I could…
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
Fan duct for the Nextruder hotend fan. I was having issues printing PA6-CF and uneven cooling causing warp on one side of the models being printed. No matter the print orientation, the right side of the model would show signs of uneven…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ho Ho Ho! 🎄 Imagine a Christmas tree made of not just two but three parts , each twisting into the other to create a double vortex illusion – yes, it’s twice the magic! The twisting motion makes this tree look absolutely mesmerizing and…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Inspired by the Nextruder gearbox, I created this visualizer. The extruder indicator looks very similar to a cycloid gearbox, although it is actually only a half one. Google it, it's an interesting concept! The middle part rotates…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction This accessory will be used in one of my projects currently being developed for the PRUSA Mk4. What is this for? This serves to limit the tightening force on the nozzle when it's being changed. However, please so use it with…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are lots of Nextruder bin designs for Zach Freedman's Gridfinity system, but none of them worked for my needs. So I made this one from scratch. If you are unfamiliar with the Gridfinity system, watch Zach's original video below.…
Wydruk około 4,77 €–5,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ho Ho Ho! 🎄 Imagine a Christmas tree made of two parts that twist into each other – yep, you twist it into place. This creates an impressive vortex illusion , making the tree look almost magical. Caution: The illusion is so captivating,…
Wydruk około 1,33 €–1,63 € nettoWstępna wycena jednego wariantu
The endcap is held by a middle pin into the profile. The small standoffs prevent rotation. There are 5 Versions since different extrusion brands also have different hole sizes: with a pin for a 5mm hole with a pin for a 5.5mm hole with a…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
This is a PrusaSlicer project with the settings from CNC Kitchen. The Volumetric Flow starts at 7 mm³/s and goes up to 25 mm³/s in 1,5 mm³/s increments. Default settings are for the Prusa MK4. step by step to individually adjust the…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
Extrusion indicator in the shape of the Open Hardware symbol. Requires two 8x3mm magnets and some superglue. Print instructions No supports. One color change. After it's printed, please scrape the recess so that the magnets will sit flat.…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
There are many extruder movement indicators, and I was looking for something simple, so here is my own take. This is a collection of a number of indicators, printed in two colors (black and orange Prusament PETG in my case, to complement…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Literally just took the original Prusa Mini gcode file and in text editor changed the M92 line to M92 E415 in order to print well with a BondTech Extruder. Thanks to JamesHZ (https://www.printables.com/social/116023-jamehz/about) for…
Wydruk około 0,86 €–1,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Yet another design of extruder indicator for Prusa printers. Pro tip: if the part stops rotating with the extruder glue a small piece of paper on the magnet (e.g. use a paper circle from puncher and a glue stick) to ensure friction…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I was having a lot of trouble printing with flexible materials like Ninja Flex on my XL so I decided to modify the existing parts to try and eliminate the filament jams. Initially i started with reducing the friction from the filament…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
As stated by the original project here : Sometimes the filament gets stuck between the stepper motor and the drive gear of the nextruder. This design closes the gap between the stepper motor and the drive gear, thus limiting this source…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I decided my Prusa MK3s needed a really cool extruder visualizer - and decided to design an animated Rick and Morty Portal. Animated Gif of the visualizer in action . Please see the Prusa Blog for details on building the inner, spinning,…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu
Since I was not completely satisfied with the available solutions, I designed my own version. It was important to me that the cover is stable and takes up little space, so that cables can be routed well in the profile. There are different…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Changing colors between layers is a known and easy to use feature in Prusaslicer. If you want to change filament within one layer you usually need the MMU. But with virtual extruders and some prearrangements in the model and slicer, this…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Endcap for 30x60 mm aluminum extrusion.
Wydruk około 1,26 €–1,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just another Extruder Rotation Visualizer "Radioactive" Follow the Instructions here: https://blog.prusaprinters.org/visualize-extruder-motor-movements_7392/
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a pre-arranged and pre-supported collection of all necessary parts to print a case for the ESP32-Camera with a side-arm mount on the 3030 Extrusion of the MK3 and MK4, and t-nuts that don't need disassembling of the printer to…
Wydruk około 5,39 €–6,58 € nettoWstępna wycena jednego wariantu
I noticed that the wrench with chamfers is very close to fitting IBnobodys heatblock clamp so i remoxed the STL to make
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
This is an 'extrusion and assembly tolerance test' designed to check the minimum visible extrusion capability and the minimum distance required to assembly pieces working with a 0.40mm standard nozzle. The units of the numbers below the…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
Update: This part was recently changed. If your extruder was manufactured after February 2021, you should use the 2021 version. Earlier printers will have to use the other. I found it very difficult to set the very sensitive extruder…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
How-To Print: Recommended layer height: 0.10 mm Color Change (Please see the tutorial below) Support: No needed Let the Visualizer cool down slowly on the printing plate to avoid being bent. How-To Change Filament Color: Montage: Just…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
As soon as I saw the Nextruder and the gears on the MK4 I thought it would be nice to see those during printing. So here it is! A Nextruder gear window! If you like the idea of a window, but want to use the original washer check out my…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of MayrM's knob but scaled down to dia 33 mm. The original seemed too clumsy. The part attaching to a stepper's shaft is scaled to 101%. Fits to stock extruder on Anycubic Kobra Go, should be compatible with Ender 3 and other…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
This extruder use a dual gear drive and you will be able to integrate the FS in the extruder body, similar to the IFS extruder. We have added three variants for PC4-M6, M8 and M10. The filament path is now cleaner than in the VERTEX…
Wydruk około 7,76 €–9,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an Extruder Visualizer based on the epic John Cleese character from the Ministry of Silly Walks sketch by Monty Python. Check out https://www.prusaprinters.org/visualize-extruder-motor-movements/ for more info on how to use it. I…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Allow Top loading of filament when using the BondTech Extruder. To make this work you will need a M3 x 50mm screw and hex nut. That was the hardest part as finding anything that long took some time. This is the arm only so you will need…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This print is only 40 minutes, uses only about 1.5g of each filament. The layout matches the purge matrix so you can easily enter your values after eyeballing the clean point. You will get cleaner prints and probably save a lot of…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena jednego wariantu
This is a guide for tapping an M5 thread into the end of I-type 2020 aluminum extrusions. These are the type with 5mm slot width. The model was inspired by existing designs like this one:…
Wydruk około 1,04 €–1,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Watch those planetary gears spin! Using basic settings with a little tweaks from https://www.printables.com/model/15310-how-to-print-glass this is a way to print a completely clear extruder motor case so you can add that extra bit of zazz…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Material-saving distance tower test model suitable for dialling in most of the printing profile parameters, including retraction, flow/extrusion rate, temperature, bridge, ironing settings, and certainly many more. Optimized for 0.4mm and…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
2020 Leveler Pads for Aluminum Extrusions - Stabilizer - with M6 Threaded Leveling Mounts Overall dimensions: 85x20x18mm double 50x20x18mm single Suitable for:…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
A swirly extrusion Indicator. Three colors with no MMU. Two 3x8 magnets glued together, then glued into the recess on the back. Print instructions Uses 3 (M600) filament swaps. Start with black (or whatever you want the background to be),…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
This is remix of Logitech C270 tripod for 30x30 extruded aluminum profile. Print instructions Rafts: No Supports: No Resolution: 0.2mm Infill: 40%
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Introduction This accessory will be used in one of my projects currently being developed for the PRUSA Mk4. Although I'm aware that there are several solutions for this purpose, I have chosen another option that will fit into the…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Size: 82mm x 52mm x 41mm Filaments: PLA Mystic Brown (brown) and PLA Vanila White (white) Note: All parts need to be glued.
Wydruk około 0,99 €–1,21 € nettoWstępna wycena jednego wariantu
This lightweight rotor-style visualizer mounts onto the shaft of the Ender 3 V3 SE's silver extruder stepper motor. Designed for effortless visual monitoring, it rotates as the extruder motor turns, clearly indicating direction and speed…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
A simple to print dual color On Air warning sign. Just swap the filament color and have a dual color print. The combination of colours is yours to choose. The base is printed in a single colour, black, has 4 holes on the back for easy…
Wydruk około 1,38 €–1,68 € nettoWstępna wycena jednego wariantu
Extruder rotation visualizer. Three different models depending on the size of the magnet that you have available: d 6mm x h 8mm d 6mm x h 6mm d 8mm x h 6mm Just insert the magnet in the center. Molded in PETG, nozzle 0,4mm and layer…
Wydruk około 0,12 €–0,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Until today, I missed the right extruder motor movement visualizer ;) Do dnes my chyběl ten správný ukazatel otáčení motoru extruderu ;) Print instructions No support, simple print... In this case PLA. Bez podpor, jednoduchý tisk. V mém…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
These holders hang from the XL's side extrusions to store your extra Nextruder nozzles. When the nozzle is in an extruder, the holder becomes a label that clips on to the extruder to remind you which nozzle is currently in use. The .3mf…
Wydruk około 3,74 €–4,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the exact Prusa i3 MK3S MMU2S extruder idler with one layer added to the part at the top that breaks the filament sensor beam. I modified this piece because I was attempting to pair PETG and a Flex filament. I found that the Flex…
Wydruk około 0,49 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description: Interlocking dice is a 3D printed object composed of two separately printed parts. It is designed to be printed with two different colours but with a single extruder printer, so you can use the colours you like. It can also…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Geändertes Cover, das besser passt und Probleme beim Kalibrieren der X-Achse verhindert da das original Cover manchmal nicht ganz anliegt ########## Übersetzung des original Textes von @Stefan_106413 ########## Die originale Abdeckung für…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
These G-Code files help you to easily feed 200 mm of filament through your nozzle at different flow rates in order to adjust your Idler tension. Just copy the files onto your SD card, pre-heat your hotend and select the one you want.…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
I modified on (MK3S/MMU2S Modified extruder-idler-mmu2s1 - Solves IR Filament Sensor Issues_by Sneaks) to make the arm sensor longer, and it worked fine when I test it. Give it try !
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Needed a box for my quick change Nextruder Hotend Assemblies. Holds 3 completed assemblies, and 16 assorted print heads. I enlarged the box, but also shortened its height. Be careful the first time you try to close the case or you might…
Wydruk około 6,91 €–8,45 € nettoWstępna wycena jednego wariantu
This mount is slim enough to mount a Raspberry Pi Zero 2 W on the rear side of the z-axis of a Prusa Mini/Mini+ without interfering with the filament feed tube.
Wydruk około 0,60 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Love the original model but was impossible to print it with a single extruder so i made this remix. Its not perfect and need a little bit more of work (i will try to make it better when i have time) but it work. 0.2 layer height One…
Wydruk około 0,23 €–0,29 € nettoWstępna wycena jednego wariantu
This Extruder Visualizer, unlike most of the others you will find, will help you center your magnet thanks to the centering lip that will also collect the extra glue. This Extruder Visualizer is also designed to ensure a good clearance…
Wydruk około 0,14 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of GLeZz's Red Valve Extruder Visualizer to fit bowden extruders on Anycubic Kobra Go / Ender 3. Downscaled. Print with supports, split the valve into two parts to save material, print the nut separately. Fits to stock extruder on…
Wydruk około 0,86 €–1,06 € nettoWstępna wycena jednego wariantu
I had a heck of a time trying to find an extruder indicator that will work with my new V3 SE. The few that were out there did not give me what I wanted. So, I took the good work of Toni H and updated it to work with the new extruders that…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
EXTRUDER COVER FOR KINGROON KLP1 210 My print is printed from Graphene PET Printed on 3 perimeters, filling 40% with a wall height of 0.15mm. Supports are not needed I recommend printing from ABS, ASA, PET material. Enjoy
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This Extruder Visualizer, unlike most of the others you will find, will help you center your magnet thanks to the centering lip that will also collect the extra glue. This Extruder Visualizer is also designed to ensure a good clearance…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is cover for Original Prusa MK3S+, to mimic the design of the Extruder cover for the Original Prusa MK4 and XL.
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
This is a model that I designed to help me make some custom aluminum extrusion pieces for a Voron 0.1 that I am building. While it was used for custom pieces, it could also be used to help you if you cut or source your own aluminum…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The extruder motor movement indicator is a nice and useful addition to the Prusa style 3D printer. As I have several Prusa models it would be nice to show the model with an indicator. Thanks to Petclaud for this great design! For assembly…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this ender 5 spool holder for my Ender 5 with direct drive extruder. It sits in the back by the y-stepper motor and it conveniently slides into the frame so you would only need: 2 screws and 2 t nuts that already came with your…
Wydruk około 3,89 €–4,76 € nettoWstępna wycena jednego wariantu
I copied the framing nut provided with the Ender 3 and deepened the thread length a bit. I needed to enlarge the female thread with a 3 mm tap. I did not copy the bolt. The nut is used in my "Filament Sensor" offering shown elsewhere in…
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
I wanted to screw some things to the prusa MK3S+ aluminium extrusions, but I didn't want to take the printer apart and realign/calibrate it. So I took a standard t-nut design and modified it in a way that you can insert it through the 8mm…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
This Extruder Visualizer is based on the “Josef Slurping Spaghetti” graphic found on empty Prusament spools. The two-tone Josef component slides onto the extruder motor. The spool is made in two segments so no supports are necessary and…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Nextruder Nozzle Holder with box, up to 7 Nozzles MK4_Nextruder_Nozzle_Holder_v2.obj: The column in the middle is ~10mm higher
Wydruk około 1,79 €–2,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Since the Prusa xl requiered special Temp treatment, i designed a 2 Color Temp Tower with 1 Degree Temperature steps. This temp Tower is specifically made for the PRUSA XL . This part will fail on a “bedslinger” The Base is 2mm Tall. Then…
Wydruk około 6,44 €–7,87 € nettoWstępna wycena jednego wariantu
The clip can be slotted into 2020 extrusion from the side, and then rotated to lock them in place. They can be quite stiff to get in, I used an adjustable wrench. I've included a 3mm hex wrench socket that may also work to turn them into…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
I needed a safer storage for my spare nozzles so i made this to replace the plastic bag the spare nozzle came in. This is for a single nozzle which i prefer over boxes with multiple nozzles in my sparepart kit. Easy print, text can also…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
This print elegantly relocates the Ender 3 extruder from behind the x-axis gantry to the front. This makes the extruder easier to access as well as keeping the bowden tube fully in front of the z frame. This way, the bowden tube doesn't…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
Made for Prusa MK4 and Prusa XL but fits with every E3D nozzle. You can use it with the Prusa Nozzle Replacement Tools. No supports needed.
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
Holder for round temperature/humidity sensor, suitable for mounting in AL profile 3030 (Prusa Mini). The holder has prepared guide rails for the grooves of the AL profile 3030, the hole in the holders is prepared for an M5 screw (it is…
Wydruk około 0,46 €–0,57 € nettoWstępna wycena jednego wariantu
The Wu letting you know you rollin! Protect ya neck with this killer bee of an add-on. I printed it from Matter3D Basics sun yellow PLA: https://www.matter3d.com/products/basics-series-pla?variant=42420619772081 0.40mm nozzle 0.15mm layer…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Just a collection of simple extruder position indicators. It's not derived from other models, but it's definitely been inspired by them. This uses a little 6mm x 2mm neodymium disc magnet. Friction fit seems to be sufficient.
Wydruk około 0,17 €–0,20 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you want to change your Prusa extruder motor to an LDO extruder motor, you should know that you will need to mount it with the connector facing left or use this mod. It is a variant of the original Print fan support for a Mk3s/+,…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
In den Zeiger sind zwei Neodym Stabmagnet Ø3mm x 10mm eingepresst. Diese stehen vor und liegen an der Welle des Motors an. Gedruckt mit Supports für den kleinen Zapfen.
Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu
