Liczymy pasujące modele…
If you are looking for a solution for your cable management that is functional gives your Voron a clean look (that it clearly deserves 😎) is flexible, easy to handle and modify Maybe this is something for you! What I use the clips for:…
When adding the Nevermore air filtration system and two additional the bed fans I wasn't happy with the cable management solutions that I found 😕. I started with designing these clips for the cable routing but that left me still missing a…
Not necessarily to be printed, but used when designing projects in CAD. STL, OBJ, F3D and STEP files included. New 2020-R Extrusion! Please don't forget to like the model if you find it useful. Thanks!
I made this remix of the design made by HD_Creator ( https://www.prusaprinters.org/prints/42971-t-nut-for-pursa-mini-extrusions-groove-8-type-b-m4/comments ) because it feels safer to screw against a metal nut instead of the plastic. Also…
Why? I needed adapters to mount the Wago 221 series connectors to 2020 AND 3030 extrusions. I wanted them to be modular in size and space efficient. Those adapters are a remix of the following models:…
Very simple alignment gauge for mounting an MGN12 on a 2020 or 3030 extrusion. Will work on any 20mm or 30mm T slot extrusion face. Put the linear rail on the extrusion with bolts fitted, place a few of these over the rail / extrusion and…
Update 04.01.2022 This design was highly popular ever since I made it on a long winter night. Despite the fact that it required manual thread cutting to get it's M4 inner thread, users of the Prusa Mini liked it a lot. That was reason…
Please post your makes 😁 Description Easily mount and unmount things off of your printer. Should work with any printer that uses 2040 V-slot aluminum extrusion. I was told that it won't work well on T-slot extrusions. Instructions…
Design history This design is based on my original T-nut for the Pursa Mini profile, which again was based on the dimensions of commercial metal T-nuts that are offered on the internet. I was impressed myself how strong this printed T-nut…
A jig to drilling holes for blind joints in v-slot extrusions as well as for tapping the ends of the extrusions. I use it when drilling and tapping the holes for 3D printer builds. There are 2 jigs. drill_tap_jig - This is used to tap the…
These jigs should help drilling holes in aluminium profiles that line up with taped ends of other profiles. Designed for 6mm groove profiles. The 66, 70 and 86mm dimensions were especially made for the Muldex 3D printer design from John…
FT PANEL CLIPS (for 2020 extrusions) FT Panel Clips work with Voron 2.4 / Trident or any other squared frame printer using 2020 extrusions. They have been designed to remove the need for any hardware (hammer head t-nuts and screws).…
I adapted the great VzBot frame brace for my 3030 extrusions. Made it wider and added holes that fit M6x12 bolts. That would be the “medium” one, about 20cm long. Based on this one, I created a “short” (10cm) and a “long” version (29cm).…
Update! I made a new version with even more compatible extrusion types: https://www.printables.com/model/493621-aluminium-extrusion-nuts-and-t-nuts A set of easy to print and use nuts for 2020 and 3030 extrusions. There are 3 types:…
Just a simple Hirth joint that I've made, which was very useful and very rigid for my application. Category: 3D Printing
Zruncho's No-Drop Nut mod is very popular but only works for conventional 1515 extrusions, these have been redesigned for makerbeam XL extrusions. There are 12 and 15 mm (15 mm is best for most uses) single nut versions as well as a…
Fully workable strong T-nut for e.g. 20x20 extrusion. It contain thread, so easier mount then not threaded one. Thread optimized for 0.15 layer height, do not try different one. Tested during building custom 3d printer and its frame.…
Printed MakerBeamXL 1515 extrusion and Clips to join them together. "Why not use TinnT's or ryandam's solutions? They seem much sturdier and easier to print than this" Because I plan to use future 0.2 tophat mods, such as chirpy's Tophat…
Hey guys, just a quick sketch of the aluminium extrusions used on the original Prusa i3 MK3 / MK3S. There are two lengths used: 205 mm (8,07") and 120 mm (4,72") The holes in the corner have an diameter of 4,7 mm - tap yourself a M5…
Screw-less wire organising brackets / clips for (Misumi 2020) extrusions with minimal printing and installation time. Use these as to make easy, clean and serviceable wiring. Can be used as alternative wiring organisation solution if you…
I needed an anchor to mount a PG7 size cable gland to 2020 extrusion for my VORON Legacy build. It serves as the static position for umbilical setups. It allows belts can be run between the anchor and frame. Hardware needed: 1x M5x8 SHCS…
The use is similar to some of my other models, like the Self Centering Gauge , Self Centering Drill Guide , or Compact Self Centering Gauge . About the model This is a drill guide specifically for extrusion profiles to get a centered hole…
V-slot extrusions 250mm long 2020 2040 4040
moved the old to old and added the newly in onshape created ones old stuff -------- new_din_wago.stl print this one, add a new_din_voltage-plate.stl after fixing it on the rail its a hackedit out of…
***MODEL IS UNTESTED*** This is a concept in my mind but i do not have a printer capable of printing it. I have shared this on reddit and have been asked for the files so I am going to go a head and post them here. These were designed…
I found a really good cable clip collection for (40 mm and 45 mm) aluminium extrusions from thingiverse and wanted to share them. Will these fit my aluminium profiles and cables? These clips were designed for the very common 40 I-type and…
I needed to drill holes in 2020 extrusions for a project - a bunch of butt-joints - and wanted it to be easy and repeatable. Already had Fusion open so threw this together, iterated a few times, and walla. Update: Re-uploaded with a…
These clips allow you to use a zip-tie to secure a cable/wires to a 3030 aluminum extrusion. To use them, insert into the slot in the extrusion and twist ninety degrees. Then insert a zip tie through the slot in the clip and secure your…
Created this drop-in nut so you can mount things to your 3030 extrusions without having to slide in from the ends. Print in the orientation supplied for maximum strength. Print Settings Supports: No Resolution: 0.2 Infill: 30% Notes:…
I found the 12's to be a bit too long back-to-back for some locations. They print super fast. Use your material of choice, I use ABS for my builds. Use the extrusion factor to adjust the fit as needed. Don't be afraid or too proud to use…
I adapted the great VzBot frame brace for my 2020 extrusions. Made it wider and added holes that fit M5x10 bolts. That would be the “medium” one, about 20cm long. The original is available on GitHub: https://github.com/VzBoT3D/VzBoT-Vz330…
I have been pretty happy with the light bars on my Voron Switchwire and wanted something similar for my Mercury 1.1. However, I needed them to mount to my 2020 extrusions and for them to be at a 90 degree angle versus the standard 45…
.200 layer height, no supports 5:30ish print time I designed this for 3030 aluminum extrusion frames. Feel free to use it as you see fit. My plans are to design/build a large Corexy with as many 3D printed parts as possible. Any…
This is a pre-arranged and pre-supported collection of all necessary parts to print a case for the ESP32-Camera with a side-arm mount on the 3030 Extrusion of the MK3 and MK4, and t-nuts that don't need disassembling of the printer to…
This set includes dimensionally accurate CAD models of the OpenBuilds V-Slot aluminum extrusion profiles in 2020, 2040, and 4040 formats. Designed for engineering, prototyping, and 3D printing applications, these models are ideal for use…
Perfect for any Profile running 1515 extrusions 45 Degree 1515 LED Daylight on a stick V0 Micron+ Clips Requires 2 standard Voron heat inserts and 2 6mm M3 screws per light.
Fillament Spool Holder with Fillament runout sensor attachement. This was designed for my Artillery Sidewinder X-1, but should fit a range of 3D printers. It attaches to 2020 and 2040 aluminium extrusions. Specially designed for those…
I would have preferred to use something softer than 95A TPU, but it's all I had on hand. ⚠ Will not fit into the extrusions if you use a non-flexible filament. My Sovol3d related repositories: OSS Klipper Configuration Everything Sovol…
Common tops, roll in t-nut and hammerhead t-nut versions. Separate pieces that allows for separate colors. Original are 2020 extrusion models. I have now added 1515 extrusion models. Updated 1515 6mm and 5mm Locks. Added longer 1515…
diversos modelos todos d e 200mm, si necesitas una longitud diferente no dudes en pedirla.
Yet another LED strip light holder, but this one is for use with 1515 extrusions commonly found in small form 3D printers such as the Printers For Ants Salad Fork or Micron, and Voron V0. While building my Salad Fork printer, all of the…
BTT Pi Mount for 2020 Extrusions / Enderwire as it has a slightly different hole pattern than the Raspberry Pi. It is also moved away from the extrusion to allow room for 90 degree connectors.
This miter saw flip-over fence stop block and knob can be used with EX 10 Series aluminum extrusion. I used the EX-1030 extrusion profile for my miter saw fence, which is 1" wide x 3" high. The EX-1030 product is an exact match for the…
Mitre box to cut 2020 extrusion using hand hacksaw. Should be useful If you forgot to order a laser cutting service:) Guides should be done from steel cylinder with 6 mm diameter. Better hardened steel and it is possible to use metal…
I initially started using the Articulating Raspberry PI Camera Mount ( https://www.thingiverse.com/thing:3114849 ) on the Prusa MK3 mounted on the x-axis motor but didn't like the fact that I couldn't have the camera at a fix point. Since…
2020 Leveler Pads for Aluminum Extrusions - Stabilizer - with M6 Threaded Leveling Mounts Overall dimensions: 85x20x18mm double 50x20x18mm single Suitable for:…
Alignment tool for MGN9 Linear Rails towards 4040 Aluminium Extrusions
A slim profile case for Skr mini e3 with space for raspberry pi 3 and 2x mosfets for 2020 or 2040 extrusions. Please note that if you decide to use the raspberry pi, there won't be space to plug in the USB therefore the alternative is to…
I wanted black aluminum extrusions, but in my country (Germany) black extrusions are only available with a 5 mm groove (i've made a model of my extrusions:…
Currently untested, will update post or model when fully tested. Designed primarily for my Rat Rig Vcore 3 printers, but would work for any 3030 extrusion. BOM: BTT PiTFT50 v2 Touchscreen M3 x 8 screws - x4 M3 Brass Inserts - x4 M2.5 x 6…
** I make no claim this works, I printed mine, and they work well, but I am not great at 3d models I'm sharing this because the original model is great and way sexier, but I had already cut my extrusions short. While I extended the upper…
Update 4/11/2023: Tweaked the tabs that go into the extrusion, and pulled the mount out 2mm further to give better clearance for your things. It's a snug fit, but fits well. I liked Citruspers Gridfinity mount, but I wasn't fond of having…
Drilling aid for blind joint holes using the drilling jigs. This helps to keep the holes accurate without fraying the holes. Applicable to 2020/2040/4040 extrusions All drill bushings fit, only the diameter of the hole changes. The…
I like the snap-in switched outlets like those used in Voron printers. I wanted something similar for my RatRig VCore-3 build, but I didn't find anything. So I modified the Voron power inlet to allow mounting to two 3030 extrusions. This…
Made in Inventor. Based off online dimensions.
In order to get my cables managed on the AM8 conversion i am doing, I designed some simple cable clips in 2 variants: Single and Double. Easy and fast to print in greater batches (12 need like 1h on my Vcore). I used 3 perimeters so the…
This mount allows you to mount a 15mm(OD)x10mm(ID) cable grommet to a 4020/4040 extrusion. I used it together with my umbilical cable mount for the Voron Stealthburner…
A TT motor mount for 8020 Series 10 extrusions. Print instructions Unassociated tags: 8020 series 10, geared motor, motor mount, tt motor, tt motor mount Category: Robotics
What is it? Tap guide to be mounted on aluminium extrusion. Contains a grip for the tool, and open area for seeing inside. Which is diameter size plus clearing. Why make it? Most of the time while tapping threads you have only one shot.…
40x40 mm bracket for aluminium extrusions with M8 screws
These Rpi's aren't cheap nowadays so why not provide some over extensive cooling for them? This is my personal use case, but these fan mounting plates can be used for other purposes as long as they are mounted on 2020 or 4040, or 2040…
Hello there! This is a simple holder for a 60x60 PTC heater. It mounts to the rear corner of a Ratrig V-Core or other printers with 3030 extrusions. The frame mount design is based on the top lead screw constraints of a Ratrig V-Core. The…
This is a bracket to mount a 240mm water-cooling radiator to 2020/3030 extrusions. It can accommodate different panel thicknesses if you're installing it outside an enclosure. Happy printing!
This linear slide is sort of an ExoSlide knock-off (exoslide.com). It uses 12 tiny MR63 bearings to run on the outside of a square aluminum extrusion. The bearings only have a load rating of about 15 lb. but that should be ample for most…
Modified the original model to use two 2020 or 2040 aluminum extrusions 350mm in length. STEP file is included to remix extrusion length if needed. Also made it a little shallower to save on filament. I had some rubber adhesive strips I…
Einstellgabel um den Fluss/Flow einzustellen. Es gibt viele Methoden um den Fluss/Flow zu kalibrieren. Das hier ist nur eine davon und hat den Vorteil, völlig ohne Messgeräte auszukommen. Es werden einfach die 2 Gabeln ausgedruckt und…
FT PANEL CLIPS (for 1515 extrusions) As requested, the FT Panel Clips have been shrank down to work with 1515 extrusions. Printers such as the Voron V0 typically do not use foam tape in between the extrusion and panels so that made this a…
Dies ist ein Endstophalter in zwei unterschiedlichen Größen für Aluprofile 2040, 2060, 2080. Die Modelle wurden mit FreeCAD erstellt. .fcstd, .step und .stl liegen bei, Änderungen können also leicht gemacht werden. This is an end stop…
This is my mount for the power connector of my Hypercube build. I use this power connector with a switch: https://www.banggood.com/3-in-1-Fuse-Power-Supply-Socket-for-Makerbot-Ultimaker-p-1051419.html However i replaced the 2 pin switch…
A webcam holder to mount common webcams on Voron 2.4 and 3D printers using 2020 extrusions. Specifically, this mount fits webcams that have a horizontal tube-like hole in the back. I have included the Autodesk Fusion 360 files.…
Pretty straightforward, print these in TPU and install with drop-in t-nuts. I print them with high infill and typical TPU settings. 7mm height should be acceptable for most printers, the 15mm is for if you need to create a bit of…
This is a remix of another lift handle, which was only provided as STL format, but didn't really fit. So i constructed it again from zero.
Please give feedback if it works well or needs changes.
I noticed my Ender 3 had a slight wobble when sitting on an even tabletop and I couldn't seem to adjust it. Printing these legs fixed my issues. Plus, elevating the printer 2" made it much easier to move around when needed. I also added…
Voron Spool holder for 2020 extrusions The reason for this model was to have a lightweight spool holder that only needed a single M3 T-nut. Holds a single 1kg spool 30g of filament for all parts. Sizes of acrylic panel spacings include:…
I love agepbiz's minimalist Xbox Controller stand, and I love Manabun's remix for the Nintendo Switch Pro Controller (great job making it look like the original but fitting the Switch Pro controller!), so all I added were a few (5) 9x3mm…
This handle fits on to 4040 aluminium extrusions. I printed mine using ASA Prusament.
This hinge uses a joint design that's unique to additive manufacturing, you couldn't make a hinge like this any other way. It's also sized to fit nicely on a 20XX-style extrusion so the pivot point is right next to the outer edge of the…
I wanted to connect some 40x40 extrusions to my desk as legs. So i created a Connector which screw in the worktop and connects with two countersunk screw. I choosed PLA which is fine but it got some cracks so i would at least use PETG.…
Update : Rollers thickened for more stable positioning on the rail. M3x20 socket cap screws needed instead of M3x14 with the new parts. This spool roller can be mounted on a 3030 aluminium frame or can stand on the table without support.…
A jig I made to better grip and center my hand tap (this style: https://amzn.to/4e0z4tK) for aluminum extrusions. Best printed out of something durable, PETG or ABS/ASA. Available for 1515, 2020, and 3030 extrusions.
Update 2020/07/29: Added STEP file for project. Update 2020/02/10: Updated arms to have greater support for the weight. I designed this camera mount to be used on any 2020 or 2040 extrusion-based printer. You can mix and match the various…
I remixed the VzBot handle to match my front panels (135mm between holes). Not printed it yet, so be warned ;) Because the screw holes align with the 3030 extrusions and I need the screw head to fit inside the extrusion nut, I used 2…
This is a mount designed for attaching a GoPro Camera mount to a 20mm T slot extrusion. It includes a printable T slot nut with or without a heatset insert. It needs an M5 screw and nut for the GoPro. The inserts are designed for two M3x8…
Two versions - one just twisted from the original, one is twisted and extended for more clearance. If you like it, please make sure to “LIKE” so I get credit!
A simple holder for 608 ball bearings which centers itself on the most common extruded T/V-slotted aluminium profiles with 8mm wide slots using M6 screws. The part can be adjusted by downloading the FreeCAD file and change the dimensions…
M3x10 Cap head - 1 PCS M3x14 Cap head - 1 PCS M3x20 Cap head - 1 PCS M6x15 - 1 PCS *20240214 You'll have to split in in your slicer
4xM3 screw mounts + 2xM5 screw mounts
See either camera: 5MP OV5647 1080P Camera w/Infrared Night Vision Camera 5MP OV5647 1080P Camera V1 for Pi 4
Cable holder for 2020/40 aluminium extrusions in different designs. You need a M5x8 Screw.
This arm uses two F623 bearings, which are usually used to attach a drag chain to Stealthburner (which you don't need anymore because you are switching to an umbilical set-up). You can use one or two piano wires up to 1mm with this arm.…
What's this? This is kind of the drop-in nuts for aluminum extrusions. This can make parts fix on the 15mm aluminum extrusions. How to use. Print this model. Push this into a slot on the 15x15 aluminum extrusions. Pass a screw in a parts…
ENGLISH Mounting bracket for this 7 ports USB hub : https://s.click.aliexpress.com/e/_DFBW7vt ▷ Join the Patreon for exclusive content : https://www.patreon.com/lebois_eng ▷ Discord (I am often there) : https://discord.gg/UXP4KESnSE ▷…
Enhance Your 3D Printer Frame with Precision Engineered Aluminum Plates When it comes to perfecting your 3D prints, having a stable and reliable printer frame is paramount. Our Corner Plate and T-Plate Set, meticulously designed for 3030…
A simple mount to bolt the klipper expander board to your aluminum extrusion. Updated the design so the board can be press fitted in the mount, no heat inserts needed! You’ll need: 2x M3x8mm 2x M3 t-nuts OPTIONAL: 2x M3 heat insert…
MGN12 End Stop for 20mm extrusions. I built my RailCore II using 2020 extrusions instead of the standard 1515 that come in the kit. These end stops were created in Fusion 360 to use with those extrusions. Fusion360 archive and STEP files…
Easy to install drop-in clip for securing 4040 extrusions to a flat surface. Mounting hole is sized for #10 flat head screws. Print on its side with 100% infill for maximum strength Print Settings Printer Brand: Prusa Printer: I3 MK3S…
I made fully printable and rock solid extrusion profiles.I made fully printable and rock solid extrusion profiles in 25x25mm for M4 hardware. The profiles can be scaled up by 120% to be used for M5 hardware in 30x30mm. The standard lenght…
Little slides that go into the middle rail of an extrusion and serve to attach something to it. Like, when you want to attach something to the x-gantry, a hook to hold the cable tube up, or a cam. One has a M3 screw hole so you can fix…
These are some simple clips I designed that can provide some strain relief on a 3d printer or something else that uses 2020 extrusions. There are also versions where you can insert a nut or screw to attach it to an extrusion more…
