Liczymy pasujące modele…
Do you desire powerful airflow beyond your wildest dreams? Well you will need a way to contain all that raw energy. What better than a hard case - that goes just as hard? The brand new Wolfbox MF200 has arrived, a powerful apex successor…
It's a stand for the cheap Emulation Handheld Data Frog SF2000
Probably the most useless, yet loudest attachment for your air duster: just snap it on and let the deafening whistle do its thing. It doesn’t clean better – but it sure gets louder.Probably the most useless, yet loudest attachment for…
This Gridfinity storage solution is designed specifically for your MF200 Air Duster and its attachments. The 5×3 box holds the Air Duster itself. The 5×2 box is made for the nozzles and attachments. Both boxes are available in two…
Ich habe auf Makerworld gesehen das jemand eine art Düsentriebwerk erstellt hat und habe mir gedacht hey das ist cool und mache ich auch mal. "Tja und hier ist mein Jetstream Adapter😅 " Das Teil ist sehr einfach zu Drucken und sollte…
This is a bracket adapter for mounting a Mornsun LMF200-23B24 power supply to the bottom of a Voron0.2 3d printer. V1 is adapted from the PSU_bracket_Voron0.2-4.6mm_heat_set_insert.stl model that jrdn8056 created. V2 was created from…
This model gives you the basic locking mechanism for nozzles. Attachments snap in place with a small twist, so you can easily build and adapt your own custom designs.
The one in the photo is the first version of nozzle where I had to add some glue on the mating surface to build up thickness -- otherwise it wasn't locking good enough. Since then I increased thickness of locking tabs from 1.5 mm to 1.75…
Fairly accurate not official model made from my own measurements and testing of the real model. All components included: Main body front / back attachment rings grip pads left and right power / fan control / battery release buttons…
Cooling fans 2x120mm to one pipe of f200mm duct Print in PETG
This stand is designed to let your MF200 stand upright in a stable and tidy way. It's especially useful if you want to keep the device ready to use on your desk or workbench without it rolling around or taking up unnecessary space.…
This honeycomb holder is designed to keep your MF200 and its nozzles organized. The Air Duster holder provides a stable slot to store the device upright. The nozzle holder features five slots where the attachments can be placed side by…
Hier sind schönere Felgen + Reifen für den Ferrari F2004 von Lego Felge gedruckt aus PLA mit Schichthöhe 0,15 ,0,4 Nozzle und Organischer Stützstruktur UPDATE: Felgenrand mit Logo eingefügt Reifen mit MMU gedruckt aus PLA mit Schichthöhe…
Tried making even more powerful nozzle for wolfbox mf200. Few iterations and this one was best as some some millimeter changes between nozzle and venturi inlet made huge difference how much it whistled on the highest power. Didn't try…
A relatively simple Micron style handguard with a rail piece in the front and M-lok on the sides. Three versions. Measure your hand width. Short: 53mm Medium: 63mm Long: 73mm medium is the OG design, the other's are slightly different,…
A relatively simple P90 style handguard with a rail piece in the front and M-lok on the sides Re-upload of my design on thingiverse, since I prefer Printables
Realistic wheels for Schumacher's Brick Ferrari F2004. The stock wheels are not realistic, so I checked the tyre rules from 2004, and made everything as detailed as possible with a 0,4 nozzle. The rear wheels are a bit wider, the grooves…
This model represents the Wolfbox MF200 Air Duster and is meant as a reference for creating your own holders, mounts, or accessories. It helps you save time by avoiding manual measurements simply align your design to the model. Two…
Overlay for the Behringer BCF2000, in order to use via MIDI in Mackie Control Cubase mode to manage a XR18 rack mixer. This is only the overlay for the lower part of the BCF2000 (not compatible with BCR2000) Revised version : (v.0.2) size…
Caution, this can obviously break your tool if you attempt to vacuum objects with it. I made this mostly for laughs, but it could be useful to suck air out of bags before sealing, or maybe vacuuming if someone were able to come up with a…
A simple antenna tube holder for the very nice Awesome F200 frame; https://www.banggood.com/Awesome-F200-200mm-4mm-Arm-FPV-Racing-X-Frame-Carbon-Fiber-CNC-Aluminum-Alloy-p-1142330.html Made for standard 3mm tubes Only 60º antenna…
Terminal cover for ATAZ AMF200-B24 200W power supply - a common PSU found in voron 0.2 LDO kits. The tongues on the side of the model should fit into the grooves on the psu holding it in place. Wanted one but couldn't find it anywhere for…
This is a handy holder for the WolfBox MF200 air duster. The model comes with 3.5mm screw holes to attach the holder to a shelf/workbench so that you can store the air duster out of the way Printed with 20% infill, PLA, 0.2 layer height.…
A remix of https://www.printables.com/model/194720-behringer-bcr2000-stand-30o-angle with slightly more weight at the front.
Die RF2000v2 Hotends sitzen in einer 8mm Bohrung und sind geklemmt. Die Hotends sind Bescheiden auseinander zu nehmen bzw. in der Ersatzteilversorgung schlecht und teuer. Bei dem Drucker wollte ich ohne Firmware-Änderung ausgekommen. Es…
A powerbutton and fitting collar for the BCF2000 and BCR2000 midi controllers, remixed from existing models by kemes and Mike (thank you). I recommend printing with the faces that are seen from outside of the BCR/BCF flat on the plate,…
Foregrip with RIS and MLOK for the cybergun F2000
A remix of Michael_Kovalev's F2000 Rail Handguard, with an integrated faux magpul angled foregrip.
A lightweight Runcam 3 Mount for the Awesome F200 frame. Adds 10º to the angle of the top plate, so total approx 30º Print in Flexible Material Print instructions Category: R/C Vehicles Summary A lightweight Runcam 3 Mount for the Awesome…
I decided I wanted to make a 3D printable shell replacement shell for the SF2000, not an exact copy of the SNES style, although my lack of design flair meant it turned out pretty bland but it does fit everything fairly well. Essentially…
Multiboard mount for the Wolfbox MF200 and nozzles. Print orientation; as is Print with supports.
This is a stand to hold the SF2000 retro console in vertical mode for vertical games!
Does not include the piece that slides on to the dash cam. Requires M3x20mm bolt and M3 nut. Recommended using a filament that has a high glass transition temperature.
In Australia, a common type of phone was the Telecom TF200 (of the T200 series). Other names for phones of this type are Telecom Touchfone, Telstra Touchfone and Telstra T400. If you wanted to stick it to a wall, there was a wall mounting…
Venturi nozzle for Wolfbox MF200 exchanging high-pressure stream for one with higher volume. Please consider this more as an experiment.
This design is a remix from my original F2000 Handguard model mixed with a Handguard from the 3dP90. The Slots are mlok. The screenshot shows the recommended print orientation for minimum supports and maximum rigidity. PETG and at least 3…
I expect this should print pretty well with any filament with default settings. no supports or brim required. I've printed this in generic PLA and PETG and it always has a nice friction fit.
Recently printed a Skadis board to hold my handhelds rather than them dotted around the place. Noticed quite a few didnt have any designed (or had poor reviews) so I've designed my own. Fits well enough for me so hopefully helps others…
This is still a Work in Progress, intended to convert a Renkforce RF2000 to a Voron Based printer, using a Voron Stealthburner. The Electronics are Removed and replaced with a BTT Manta M4P and a CB1 along with a Canbus adapter Board and…
You will need 2x 020 NBR70 O-Rings which are included in the Spare-Parts-Kit of your EMF200.
This Project was merged with my "Renkforce RF2000 Voron Conversion WIP" so please go there for updates.
Halo MA40 assault rifle body kit for the F2000 and FS2000 airsoft AEGs. Parts: Flash Hider (Pt1, Pt2), Hand Rest (A, B), Top Rail (6 different segments, numbered in order). Hardware: M3 screws to lock the parts down / pin them to the…
I modeled this frame connector that connects the support poles to the frame for EXIT pools because I lost one of them, and I was not able to find a 3D model of it. Model number is PF2003B Note: the part that sticks out and goes in the…
Simple mount for a Runcam3 or GoPro session for on the Awesom F200 Print in TPU for the cam to fit in. Might be updated after feedback *** MAY THE FORTH 2018 update: version 2.1 hopefully fixxed the issues from the feedback Category: R/C…
Halo MA5C assault rifle body kit for the F2000 and FS2000 airsoft AEGs. Parts: Grip, Muzzle (14mm CCW thread), Top Rail 01-08 (numbered front to back - these are the parts that go on the rail). Hardware: M3 screws to lock the parts down /…
Design to keep the panel from slapping the 2020. Filament Type: ASA https://amzn.to/45V2hFw Layer Height: 0.2MM Walls: 2 Infill: 100% Supports: false M5 Bolt and T-nut: https://amzn.to/46E62PF If you want to thank me subscribe here and to…
This Gridfinity storage solution is designed specifically for your MF200 Air Duster and its attachments. The 5×3 box holds the Air Duster itself. The 5×2 box is made for the nozzles and attachments. Both boxes are available in two…
This model gives you the basic locking mechanism for nozzles. Attachments snap in place with a small twist, so you can easily build and adapt your own custom designs.
This model represents the Wolfbox MF200 Air Duster and is meant as a reference for creating your own holders, mounts, or accessories. It helps you save time by avoiding manual measurements simply align your design to the model. Two…
This stand is designed to let your MF200 stand upright in a stable and tidy way. It's especially useful if you want to keep the device ready to use on your desk or workbench without it rolling around or taking up unnecessary space.…
Probably the most useless, yet loudest attachment for your air duster: just snap it on and let the deafening whistle do its thing. It doesn’t clean better – but it sure gets louder.Probably the most useless, yet loudest attachment for…
I expect this should print pretty well with any filament with default settings. no supports or brim required. I've printed this in generic PLA and PETG and it always has a nice friction fit.
Caution, this can obviously break your tool if you attempt to vacuum objects with it. I made this mostly for laughs, but it could be useful to suck air out of bags before sealing, or maybe vacuuming if someone were able to come up with a…
Multiboard mount for the Wolfbox MF200 and nozzles. Print orientation; as is Print with supports.
Bracket for 45-degree mounting of TOF200C-VL53L0X TOF sensor in a corner. Sensor is held in place with a bit of glue. Onshape document:…
Overlay for the Behringer BCF2000, in order to use via MIDI in Mackie Control Cubase mode to manage a XR18 rack mixer. This is only the overlay for the upper part of the BCF2000/BCR2000. Revised version : (v.0.2) size of de texts
This is a custom mounting bracket designed for the TOF200C distance sensor. The model was created from scratch and is intended for easy integration into DIY and electronics projects. The sensor can be attached to the mount using…
Ich habe auf Makerworld gesehen das jemand eine art Düsentriebwerk erstellt hat und habe mir gedacht hey das ist cool und mache ich auch mal. "Tja und hier ist mein Jetstream Adapter😅 " Das Teil ist sehr einfach zu Drucken und sollte…
Ich habe auf Makerworld gesehen das jemand eine art Düsentriebwerk erstellt hat und habe mir gedacht hey das ist cool und mache ich auch mal. "Tja und hier ist mein Jetstream Adapter😅 " Das Teil ist sehr einfach zu Drucken und sollte…
A remix of Barrel1's charging handle Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Prusament PC Grey Notes: Any material does the trick. Category: Other
Print it on its buttstock with brim and supports touching build plate. It isn't perfect, but still fun. Category: 3D Printing
I broke the power button on my BCF200 so made this to replace it. Requires supports to print, I think build plate only worked for me but it was a while ago.
