1194 modeli
Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…
Due to the large scale attached to the links, this chainmail is slightly less flexible than optimal. Still veeery satisfying to play with. Printed in PLA. Slowed the printer down a bit. Make sure you take build plate adhesion precautions.…
These coasters are very flexible. They are made using my version of 3D printed “fabric” and it's also the first time I publish the “fabric” itself. If you dare, you can split the pieces in slicer and form a new ornament ;). There are 3…
Print your cool looking 3D printed fabric/chainmail. A great fidget for testing the limits of your printer! Features Dual color profile provided Fully articulated and print in place Recommended print settings (or just use the provided…
I had this design in mind, so I decided to make it. It is an octagon-based 3D printed flexible fabric. I am not sure what is the practical use, it might even be completely useless, but I think it looks cool. It could maybe work as a small…
Inspired by https://www.jpl.nasa.gov/news/news.php?feature=6816 https://www.thingiverse.com/thing:2437081
TriFlex The extremely flexible 3D printable fabric! Most fabrics have limited drapability so I really wanted to create a fabric that was truly fabric like, and I think I succeeded. This includes the following characteristics: Triangle…
BEFORE YOU LEAVE A BAD REVIEW: A few recommendations- Don't use textured sheet. PEI or supertack is much better. Start off with a smaller piece and be sure to go extra slow first layer! Using a binder like hairspray can help. If pieces…
I recommend printing it a bit bigger so it doesn't fuse together
When I loaded the file in Prusa Slicer it detected ~1800 errors. So I ran the file through Netfab to fix those. Nothing fancy but it might save someone the 5 mins it takes to run it through Netfab. Sunset owns the rights to this.
Fun fidget toy: Mesh or fabric material, like chain mail.
Hello everyone, thanks for stopping by! The aim of this project was to create a dual color chainmail and I really like tetrahedron (three sided pyramid) so I decided to go with it. The chainmail consists of lower hexagon link piece and…
I was board and decided to challenge myself with this project, this is not my own idea i just copped the design from someone on "Printables". This was a decent challenge but i have made things that are harder to design, it was still…
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- Chainmail 2.0 - Modular 3D Printable Fabric. The…
[First, let me offer you something fantastic] I've released 22 fantastic customizer programs "Amazing STL Creator". Try them out. Create STLs that will amaze your friends. Right now is the best time to get all my programs. Get the entire…
***I made an updated version that should fix the slicing issues. I added the model here, but for the full page and description, check out the fixels 2. no supports required at all, much easier to print*** This is my current version of 3d…
This is more like a slicer hack rather than a design but it works as expected. This is a flexible fabric type that has several uses. I use it to filter air intakes on fans. You can modify the air flow by changing the infill on the slicer.…
It is easy to design a 3d printed chainmail. It is hard to do it the right way so it is flexible, but does not tangle and is still printable. Printed in PLA. Slowed the printer down a bit.
Inspired by Russian Fabergé eggs, many of which could open up to reveal a surprise inside. This egg features a maze that must be solved to access the inner compartment. Printing Use a 0.4mm nozzle and a layer height less than 0.2mm There…
I have had this idea for a ‘fried egg’ fidget fabric/drink coaster for a little while. I loved the idea of using mesh fabric in the fried egg to give it flexibility and make it feel more ‘egg-like’. The egg shell with the magnets is a fun…
The Škoda Fabia RS Rally2 is a Rally2 car and therefore complies with all FIA (Federation Internationale de l'Automobile - International Automobile Federation) regulations for this group. It is a rally special powered by a 1.6-litre…
Remixed NASA chainmail model and turned it into a hexagon shaped coaster. I shrunk it down vertically about 70% to 5 mm. Should be easy to print. I would not recommend printing at a low resolution. (btw the stringing in the photos is…
This is a super-easy 2-piece fabric tape wind-up device for 60", 90" and 120" flat fabric measuring tapes. I got tired of the mess and losing the rubber band that held mine together. Plus, I wanted something that I could wind up when I…
Inspired by TurboDork's NASA Fabric , I redesigned it to be thinner, less finicky, and much faster to print. Each tile is about 12mm across the flats, and only 3mm thick. The design has no long, thin vertical sections, making it much…
Is it practical, useful, and expands on the body of human knowledge? Probably not, but it sure is satisfying.. Introducing the Soft Box! My Cloth 3d Printable fabric has a secret super-power, it can be built into 3D objects! Why 3D print…
As the Sketchfab store is set to shut down in just days, we're facing an uncertain future. In a few months, it may become impossible to share 3D models freely. This community holds a special place in my heart, and I plan to continue…
Recommended Settings: 3 Walls, 20mm/s slow first layer, NO supports. This is an EXPERIMENTAL FABRIC and having pieces come off while printing is normal! You may have to restart or try a smaller model. Brims are not advised. Feel free to…
Use a plate with decent adhesion and a filament with good bridging. Print-in-place, flexes extremely well
The articulated tank chassis by EXTREME3DPRINT is available for purchase here: https://cults3d.com/en/3d-model/gadget/pipbot-1-print-in-place-robot Inspired by the models from FAB365: http://www.fab365.net/ My design process is covered in…
Pause after the 1st layer and place the fabric on top of the layer. Use Tape to fix on your plate borders. Make sure the fabric is flat. Printed in PLA. Slowed the printer down a bit (for the top). No supports Make sure you take build…
Fabulous Flexi Felines - AKA Flexi Cats Meet our fabulous flexi felines! Our articulated flexi cat is print in place and with no supports. Print profiles: Single colour and full colour print profiles avaliable. Material: Bambu PLA Basic…
🐉 Dragon Scale Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a Dragon Scale–style flexible mesh , entirely modeled from zero in Fusion 360…
Designed from the start with thin, small, modular components in mind, this cloth is the pinnacle of FDM hard body mesh fabric design! Measuring at a measly 2.4mm tall at 100% scale, the cloth provides ample flexibility while providing a…
There are available three sizes, the first test size is 95x100mm, the second is for the Original Prusa MINI and the third is for the Original Prusa MK2/3. Individual parts can be connected with splited connector.
This is a remix of Agustin Flowalistik's Chainmail: https://www.prusaprinters.org/prints/286-chainmail-3d-printable-fabric It uses 9 of his sample sized models in order to fill the bed of the Prusa Mini. Print instructions This print came…
Tray for household items (keys, coins, clips, sweats, pens, rings, jewelery etc.). The top tray hangs on 6 legs and is made using my 3D printable fabric which gives it a nice curved shape. You can also use the lower base tray for another…
Instructions If you want to print the smaller egg scale down everything to 60% and print “Hinge_60%scale” instead of hinge Part O-2 needs supports There is also the option to print the hinge with holes instead of the print in place hinge.…
This is a spiky version of my Fast Print Hexmaille Fabric , for a little more aggressive look! This was originally inspired by TurboDork's NASA Fabric , which used identical interlocking pieces. This design, however, uses hexagonal tiles…
🧩 NASA-Style Hexagonal Flexible Mesh Created by KNINcustom · Explained step-by-step on my YouTube channel 🎥 👉 https://www.youtube.com/@KNIN_Custom 🔍 Description This is a NASA-style hexagonal flexible mesh , designed from scratch in…
It's fabric. Print it, feel it, throw it at someone's face. Maybe even try to eat noodles with it, idc. Just do stuff with it. For those who have joined my club at the “Obsessor” tier or have subscribed to my commercial membership on…
This thin hexagonal chain maille consists of hexagonal tiles held together by little cuffs at the edges. It is very flexible in all directions. The tiles are 13mm across the flats and are only 1.8mm thick. Print using a 0.2mm layer height…
I made this to hold my fabric (soft) tape measure. I added a thumb inlay for easier spinning after I printed mine. The metal end of the tape slides into a slot on the top piece and secures it in place. Print Settings Printer: Gmax 1.5+…
We have heard your requests! We made a snap fit ring for our colorFabb cardboard spools. This was specifically made to prevent dust accumulation in the AMS module of the Bambu lab printer. Happy printing!
Baseball cap made of articulated fabric, 3D printed from PLA. Please see this short video: https://www.youtube.com/shorts/7Hk1-2h5WbM The cap is very soft, comfortable and durable. The front is solid, the sides and back are made of 3D…
Refill Spool für Filament von der Marke Recycling Fabrik. In dieser Version wird die Spool zusammen geschraubt und hält dadurch besser als in der Version von der Recycling Fabrik. Sehr stabile Refill Spool druckt in PETG um das Filament…
This is the print file for my fabric printed necklace, that you may have seen on the front page Reddit: https://www.reddit.com/r/3Dprinting/comments/8d9fmt/i_3d_printed_a_floating_necklace/ or Imgur: https://imgur.com/gallery/sA6or Or of…
Another model on the Fabric theme - this time made of triangles . This is the pattern I like the most so far - you can see triangles, hexagons and even circles in it This Fabric model is very nicely flexible, At this size it can serve as…
I lost the litte handle cover, so i made my own. Should also fit on the TM6.
"A hare is not a pet but a person. Hares are clever and brave and loving, and they have fairy blood in them. It’s a grand thing to have a hare for a friend. One doesn’t often, because they have a lot of dignity and keep themselves to…
Hallo zusammen, da ich viele leere, blaue SUNLU Refill-Spulen (V2) habe und keine Lust hatte, für die verschiedenen Farben der Refills von der Recyclingfabrik extra Spulen zu drucken, habe ich mit Fusion 360 einen Adapter entwickelt, um…
A lot of people, including me, saw the original model for this fabric and loved it for everything other than the fact that it had to be printed with the top surface up which made it way more difficult to print. So, I edited the original…
Latest files are available on MakerWorld. Get the full Plate Print Profiles: https://makerworld.com/en/models/375151 === The original by @noahrr was one of my favorites, but I found the winding holes too small for my fingers, so I remixed…
Printed face down. Makes a great coaster. Multiple swatches can be joined with a 3D pen or zip ties
Simple stand for model of Millenium Falcon created by GOODESIGN from website Fab365. https://fab365.net/items/277 stand is 115 mm tall and useable for rear left pocket for landing gear. Model is rotated 5 degrees down in front direction…
This model is a ground-up redesign of the classic NASA Chainmail fabric. This flexible fabric is made of hexagonal tiles with interwoven loops on the back. The result is a sheet of hard plastic that can flex and fold like a thick, stiff…
This is a flexible fabric heart and is print in place. I used a brim to keep the model on the bed but it might work just fine without it.
Don't forget to check out the nice remixes of this model by @Strider Varun 🌿 INTRODUCTION Designed this airpot for easy printing. The little holes let air in and the roots will prune themselves when they reach the edge of the pot. This…
Fabric Fidget crafted for tough and to have a great fidget to play with.
Abecedario, Letras en mayusculas
Each bend block is equivalent to a 22.5deg pc.. So 4 pcs will give you a perfect 90deg bend. They also have angle location marks/notches every 30 deg to help keep track of your compound bends, and make it easy to re assemble and mark once…
NASA fabric that fills a Prusa MK4 buildplate
*This is the updated version of my previous design in-order to make printing and remixing easier. Fixel 2 This is a print in place, expandable, fabric that doesn't require any supports. This design is made up of hexagons with small ball…
Original chain fabric inspired by Flowalstik's Chainmail on Thingiverse, created in OpenSCAD. The sheets can be connected to form even larger sheets; I've connected sheets up to a size of about 6x7 sheets, around 5x5 feet. ## Advantages…
I designed a new version of the seam guide with two magnet slots. This one has a 5mm-wide edge to hold down thicker or fluffy fabric while sewing. I also found that with strong magnets, it works as a pin holder too! Here’s what it does:…
I have begun to experiment with printing patterns over materials like tulle and organza, which will eventually be used for costumes and clothes. Here's a collection of patterns that I've designed, which will continue to be updated as I…
🧶🧶🧶 To make a color pattern, you will of course need automatic filament change . I did not use more than 2 colors (for the pattern itself) For coloring, I select fill and set the maximum Smart fill angle . I specify the needed loops;…
Here is an improved version of my Truchet Pattern Chainmail Fabric. It uses a chainmail-style structure that connects all the pieces together, allowing it to move and behave like fabric while still having the look and character of armour.…
These fabrics are fun to play with and can satisfy fidgety urges. The designs are eye-catching and provide visual stimulation while being handled. Each item is grouped by size, from 3 to 5 hexagonal tiles per side. The sizes for each are:…
Škoda Fabia The Škoda Fabia combines practicality and modern design in a compact package. Perfect for fans of dynamic driving and clean lines, this car is now available for printing as a detailed 3D model. With its sleek exterior,…
I tried to model this to have at least some thickness but not too thick that it takes a long time to print. The base of each scale has a good enough “foot” size to have good bed adhesion but also so that you can put a 1 or 2 layer stop in…
Holders for SKODA Fabia Console Phone Holder by giuliopierucci. Can holder is remix from Skoda Fabia 1 cup (can) holder by Bednys. I recommende use of some thermal resistant filament like HIPS, PETG (no PLA).
Fun flexi fidget in the shape of a pizza slice, if you print 8 pieces you can have a pizza in scale 1:1 At layer 4 pause and enter Polyester Mesh Fabric (Mosquito Netting) Commercial License Do you want to sell prints of this model? You…
Skoda Fabia 1 (1999 - 2007) phone holder on dashboard Diameter of the ball is 17mm I used the Baseus Car Phone Holder from Aliexpress as the holder itself https://s.click.aliexpress.com/e/_DBAMS11 It is necessary to print the model split…
A stamp wheel from the Fabrics and chainmail Collection #16 These digital 3D printable models are meant to create textures in clay, polymer clay or EVA foam, and other materials. We want to make more models like this. If you want to let…
This is a Chainmail/3D printed fabric design that can be printed interlocking or snap together. saw some of the other designs that were really cool but I couldn't figure out how to going them so I leveraged another design I had to make a…
Flexible cape for action figures like my MODULYR figure or DUMMY 13. The 6in version fits 6 inch scale figures like my MODULYR. The 5in version fits DUMMY 13 at 100% printed scale (~5in tall figures). The fabric design is based off of…
I saw a couple other designs of 3D printable "fabric" and came up with this easy to print design. It has no bridges, does not need supports and looks just the same from top or bottom side. There's definitely room for improvement, e.g.…
Welcome to the world of Printing on Fabric!!! Its really simple! Just Follow these steps: Print 2-3 Layers Hit Pause Place the Tulle fabric Mount it with tape flat on top the printed parts Resume the Print When you use Simplyfied3D you…
I contructed this snap fastener / press stud to repair my wallet. After printing, simply sew on with needle and thread. Used it on my wallet for the last 2 month now - and it worked quit flawless. Print instructions I printed with: 0.6mm…
Parametric Fabric Generator The provided OpenSCAD script compiles existing fabric models and generates custom fabric sizes. All models have been optimized to reduce their file size. If you need a non-rectangular size i recommend…
Rear wiper cap for Skoda Fabia 1st generation. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 40% Filament: SynTech PETG Black Notes: Printed upside down…
♡♡♡ Thought I would make a fun fabric for Valentine's Day! ♡♡♡ 7 models to choose from - easy & flexible mesh. Check out the video!~~ See the whole collection here: https://www.printables.com/@TripleGWorkshop/collections/1210125
An updated version of this model is now available!!! The updated version allows multiple panels to be connected together and is more flexible. You can find the updated version here: This is a chainmail fabric structure based on a Truchet…
7 Sizes to choose from! No supports, scales up but probably not down. Tactile/fidget toy. Fun shapes and easy to print. My most flexible model so far! Check out the video!~~ See the whole collection here:…
My own 3d model of a 120mm fan, more specifically a 200 cfm 120mm EZDIY-FAB fan . I needed a 120mm fan model for a fume extractor I designed, so I took some time and modeled the fan aswell
For FFF, I recommend printing at or below .25mm layer height. For faster printing, 2 vertical shells and 0% infill. Fidget with the fabric for a few minutes after printing to loosen it up and wear it in. This makes a big difference in its…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATED April 20 2023] Other variants are published…
Part of my holiday collection of print-in-place flexible fabrics for Halloween! Do not scale down, only up! Enjoy! If your joints are fused, try scaling up or changing filament. Want MORE??? ~~> HALLOWEEN FABRIC COLLECTION Think I'm…
Just another 3d printed “fabric” this one has a small unique feature. Pieces can be printed connected together ( print-in-place ) but also can be connected together after printing ( snap-fit ) - so you can mix colors, make the fabric…
I love the IKEA Markus office chair. Unfortunately, because of the not adjustable armrests and my sitting style, I never mount the armrests and that leads to a very annoying situation: the armrests mounting points remain uncovered and the…
Part of my holiday collection of print-in-place flexible fabrics for Halloween! Do not scale down, only up! Enjoy! If your joints are fused, try scaling up or changing filament. Want MORE??? ~~> HALLOWEEN FABRIC COLLECTION Think I'm…
This version has been optimised for 3D fdm printing. In the original version of the mesh, you can see many hexagons connected to each other and the docking posts touch in many places. The surfaces of the hexagons also showed deformations…
The last egg was Inspired by Russian Fabergé eggs, this one is for people who don't need another puzzle and just want a nice egg container. Plus it has more room inside. There are two options to choose from, one with 6-fold symmetry and…
Although it’s floppy, this 3D printed fish will be hard to put down because it is so fun to play with:) Fabric needed. I recommend mesh fabric (must be “mesh” with holes for filament printing on top of fabric to adhere to filament already…
The blocks incorporate a 79.4mm Center line radius (3.126" CRL) Alignment notches are every 22.5deg as well. Basic parts included: 1" long straight 1" long straight with dead-end 10 deg - 79.4mm CRL 15 deg - 79.4mm CRL 22.5 deg - 79.4mm…
These holders will help you store the fabric coasters, that you can find here https://www.printables.com/model/230771-fabric-coasters . The holders are ready for 4 pcs of coasters. If you need it for more, just use Z scale in slicer .…
Welcome to the world of Printing on Fabric!!! Its really simple! Just Follow these steps: Print 2-3 Layers Hit Pause Place the Tulle fabric Mount it with tape flat on top the printed parts Resume the Print When you use Simplyfied3D you…
i hope you enjoy my model and i don't recommend scaling down feel free to scale up but i would not scale down and i would not use support. DOWNLOADING AND SLICING DO TAKE TIME PLEASE BE PATIENT
![#0129 Flexible Fabric Tape Winder (Spooler) [new sizes added]](https://media.printables.com/media/prints/786225/images/6325215_44438b46-20a6-4396-bdae-72593db3e3a6_7d72e422-ffa4-4ae1-85e0-a7646e047e42/rl-20240317-023.jpg)
