27 modeli
Wall mount for tablet lenovo M10 FHD plus with the possibility of inserting a charging cable with the charger embedded in the installation box in the wall. The box is composed of two parts, after taking off the top part, the tablet can be…
Wydruk około 15,22 €–18,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Changes to the original The original did not fit the 3rd gen tablet. So I made the following changes to make it fit :-) The 3rd gen Tab is slightly thicker The bezels are much thinner The front camera is moved The buttons and charging…
Made a simple case that can be printed on the i3. It's not a perfect result, but good enough to protect the tablets. There is significant bridging for the speaker slot and that will result in an area that needs to be cleaned up after to…
The tablet slides into the holder. Prints in 2 parts, top and bottom, fits on Prusa MK3 exactly, the top part have built in supports as generating supports for it would go outside build plate, just pull them off. Bottom parts prints with…
With this case the camera can be easily mounted on the aluminium extrusion profile. You will need 4 m2.5 12mm screws for the case. You can use m3 8mm screws for mounting the camera to the bracket or use m3 12-15mm threaded studs and…
Also available on Maker World. Wall mount for a Lenovo M10 FHD (2nd Generation) Tablet. Has a cutout for USB port and camera. Three screw holes per side, but you would only really need two. Print same direction you mount to wall. Does not…
Wall mount for a Lenovo Tab M10 FHD + Print Settings Printer: Selfmade Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20 or more Filament: no name PLA grey Category: Tablet
Custom version of the ELP Camera Module Mount. https://www.thingiverse.com/thing:3133056 Ver2.5 Go Pro mount compatible version. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2mm Infill:…
A quick wallmount I made for my Lenovo Tab M10 FHD Plus, that I thought I could share here if someone else need something similar.
I designed this mount to allow the Lenovo 300 FHD webcam to be used to monitor a 3D printer. This 1080p USB webcam can be found for as little as US$20 and offers a respectable 95° field of view. The mount will work with any 3D printer…
Compatible avec toute radio de protocole AFHDS 2A
Tablethalter Lenovo Smart Tab M10 FHD(TB-X606XA) slim line wall mount for openGrid über Multiconnect/openGrid or Screws PLA 0,2 Use Cable AliExpress Keyword: Essager USB-C 90 Degree
The Simple Slider – A Privacy Solution HP Should Have Made The HP 320 webcam comes with a removable cover that you have to take off completely—something less than ideal for people like me who work at a chaotic, cluttered desk. That’s why…
A mount for a SpotCam FHD 2 that I designed to be mounted within the Original Prusa Enclosure. Materials 4x Screws M3 x 12mm 4x M3n nut Print Instructions No support needed. Thanks for GiantBrain's Original Prusa Enclosure STEP files.…
A PCB mount for the LM40SAMFHD700AG25WV driver board used in one of the Lululemon Mirrors. Its a press fit but still has holes for mounting the PCB with hardware. The following hardware I used: 4x M3x4.2 Heatset Inserts (However better…
This is a simple mount for the Lenovo 300 FHD camera. It requires no modifications to the camera. Available in various sizes—5, 7.5, 10, 12.5, and 15 cm—so you can print whichever size you prefer. Just place the webcam on the mount as you…
This is a case for the JRY-F9LFHD-LA1 DIY laptop screen driver control board. This case only requires 4 screws although mounting the button pad requires 2-3 screws unless you used hot glue like me as I didn't have any that would work for…
Print with standard voron settings. Hardware Required 2x Heatset Inserts 2x M3x8mm button head screws to attach top to the heatset inserts in the bottom 2x M3 Hammerhead T-nuts to be inserted into the door 2x M3x8mm screws (button or…
Our van doesn't have a rear view mirror but had a nice holder already mounted on the windscreen. Since vacuum mounts tend to fall off and gluing a holder isn't my thing, I designed a simple mount that snaps into place. You need to take…
Kept sticking the SD card in the area directly under the actual slot and having to take the machine apart to get it back. Printed this to keep it from happening again. Print Settings Printer: Sparkmaker FHD Rafts: Yes Supports: Yes…
This template allows for mounting FS.com FHD cassettes to a standard SME (Structured Media Enclosure) system. Printed using standard PLA on Bambu A1.
Adapter for attaching Player One OAG MAX to ZWO EFW (2025 update). Should be printed in as matte black as feasible. Interior baffles have a 41mm diameter aperture, designed for use with the smaller filter sizes. Optimized for resin…
This is specifically for the Gemini 2 hand controller and the Losmandy Folding Heavy Duty Tripod with 3" diameter legs. Printed in three parts, the controller holder and two clips, are meant to be glued together. I used ASA-CF since this…
Adapter for the camera/viewing side of Player One's FHD-OAG MAX to T2 (M42-0.75) male threads. Specifically designed for fitting the OAG to ZWO's 8x31mm EFW without needing an M54 to T2 adapter train. Optimized for resin printing. Printed…
Buddy3D Camera for Prusa CORE One is good, but the shipping is too expensive for me😢. So I designed the mount for cheap local SpotCam FHD 2 for my CORE One directly. Assembly requires: 2x M3*12mm screw 2x M3 square nut 3x Ø10*2T magnet 6x…
Držák senzoru BAUMER FHDK 10P5101
This template allows for mounting FS.com FHD cassettes to a standard SME (Structured Media Enclosure) system. Printed using standard PLA on Bambu A1.
