Liczymy pasujące modele…
I made these as I could not find any openly available models. This is a low profile/low drag alternative to the original Qysea Fifish Propeller protector. Example pictures show prints made in draft mode (0.3mm layer height) for rapid…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
More or less 1:1 model of claws for Fifish robotic arm. .OBJ file is here as well so we can modify them to get even more useful tools to use. After printing I recommend drilling the 4mm holes with a 4mm drill just to keep it a tight fit.…
Wydruk około 4,43 €–5,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hey friends! Look who just scampered into our collection. 🧡 This little cutie is here to charm her way into your heart with those oversized eyes and floofy tail. Perfect for any nature-themed projects or just as a fun desktop buddy. 🦊✨ I…
Welcome! The Fifne AM8T mic is a great budget option. I've been using mine for a while, and at the 60 USD price point with a boom arm, is a really good budget option. But one thing was wrong with it, no shock mount. The mic is connected…
Stand for FIFINE D6 for those who are not satisfied with the default angle of stream controller. I also added space for 8x AA batteries. This space was created with the XBOX controller in mind. Notes: Created with the “Tree(Auto)” support…
The plastic bolt was clipped on the original stand adapter, can be taken off by force. https://fifinemicrophone.com/products/fifine-k683a-type-c-usb-microphone
ONLY ON MAKERWORLD NOW SORRY Link Here: https://makerworld.com/en/models/1031476-fifine-ampligame-d6-stand#profileId-1014329 Bought the FIFINE D6 Stream Dock since the official ELGATO one was out of my budget but didn't like the angle it…
Desktop stand for the K669B Microphone
I designed a cutting claw with integrated recessed blade for cutting vegetation, ropes and small wire with the underwater QYSEA FIFISH ROV + Robotic Arm. I don't have yet an underwater drone but they amazed me. Will get a FIFISH soon!…
Short stand for Microphone Fifine AM8, compatible with any 3/8'' tread
Pretty straight forward. Should be able to print without supports
Allows you to mount the Fifine SC3 to your desk using two screws
I used Duramic PLA+ in black at .16 layer height, 4 walls, 7% infill.
This is a low profile stand for the Fifine AM8 microphone. The stand that comes with the microphone is very tall, this one is much shorter to fit in tight spaces.
Flatbed printing at 5% infill is sufficient as the SC3 is very light. Printed on Creality Ender 3 V3 Plus in 3h.
Its just a replacement for a broken microphone mount. As it is, is easy to print in PLA or PETG. Suitable for FIFINE microphones . Additional hardware may be needed. In fact, you should keep the original threaded nut that can be extracted…
Print the parts twice and flip one. Drill the outer round hole with 4mm drill. Use a M3 Threading Taps for the threads. Use a Allen M3 bolt with a appropriate length I also uploaded pictures of the measurements if you want to model…
If you use your FiFish for fishing or hunting underwater treasures, you might notice how easy is to get the propellers full with stuff. This is a simplified version of the commercial option that does not require screws
Didn't like the integrated stand on the Fifine Ampligame D6 Stream Controller pad, so I found a Stream Deck specific stand and widened it to properly fit the Fifine. As a result, it still works with the regular Stream Deck (mk 1 or mk 2)…
Just remixed with much less time to print
A stand for Fifine D6 Deck that makes the viewing angle of the gadget better. This version don't have the battery holder in the back. This is a remix, thanks for the original creator @IIGuard5KII_3330473 .
For the Fifine M9 Mic Handle check out this link. (The flag works with the 200mm models). Meet the Fifine M9 Mic Handle System! After designing the Fifine M9 Mic Handle. I was looking for a flag system, but couldn't find anything at all,…
I made a vertical stand for my Fifine K683B microphone. It uses the original mounting hardware and is very easy to assemble. Simply put the nut through the stand and mic and then screw in the tightening screw.
I love Fifine microphone stand but mine didn't come with clips or zip ties so I made 3D printed clips for the cable Tested on Fifine A6T but I'm sure it will work on most microphones with the same stand and cable Fits snug with 5mm…
This is just a basic stand for the Fifine budget friendly audio mixer alot of streamers are using now. Nothing fancy just a way to angle the mixer to an easier to see and use position.
Replacement part for the microphone mount-point of the Fifine K669 USB Microphone tripod. Interior walls are extra thick to improve the strength and reliability. Print instructions Print Settings Rafts: No Supports: Yes Resolution: 0.2mm…
Made a super simple hook for fastening the wire to the handle on the remote of my Fifish V6s. You should be able to fold the wire tight enough to feed it trough the hole and over the “bollard". leave it in place on the wire and use it…
an adapter to mount a fifine K669B mic
I like the Fifine BM88 low profile mic arm a lot! But like a lot of low profile mic arms, it only ships with a clamp mount and I couldn't use that because of the cable raceway around my desktop. So I designed a screw-in mount that's…
For the flag system check out this link. Meet the Fifine M9 Mic Handle System! The Fifine M9 Mic Handle will allow you to clip on the Lavalier-style mic and transform it into a regular-style, interview microphone! So you get more…
Holder bracket for the Fifine AM8 microphone to move closer to the mouth.
This is a custom-designed noise filter attachment for the FIFINE K669B microphone. It helps reduce unwanted keyboard clatter and room echo by slightly blocking direct paths for reflected sound waves and dampening incoming noise from your…
In short, I have my monitor on a mount and it sits quite low. Since my microphone is directional, I place it in the center in front of the monitor, but it blocks the lower central part of the screen and causes discomfort. So I decided…
Welcome! The Fifne AM8PROT mic is a great budget option. I've been using mine for a while, and at the 70 USD price point with a boom arm, it's a really good budget option. But one thing was wrong with it: no shock mount. The mic is…
The original microphone tripod wouldn't lock the mic in place like it was supposed to, and there was no way to position it vertically. This is a simple, not very stable, tripod to just elevate and position the microphone vertically.…
Fifine am8 potentiometer small, I didn't like that these potentiometers were sticking out too much.
Those original screws for mounting the claw is a real pain to use. So I made these for easier mounting and removing the claw. You will need a M3x25 screw and a M3 nut for each screw, I recommend using stainless. I printed using TPU, but…
Bracket for AW3821DW, shown on my Fifine AM8, but should work for other microphones.
Model Description: This is an extended height leg/stand for the Fifine AM8 microphone , designed to raise the microphone on the desk, improve ergonomics, and provide a more comfortable recording position. Features: Fully compatible with…
I have a cheap lavalier microphone from FIFINE. The original clip broke very quickly. So, I designed a small stand for this mic in FreeCAD, the model is included. The assembly requires a small number of m3 screws and nuts. All is printed…
3d model for holding the A6T fifne microphone on the arm. Original piece was thin in aluminum so you can print this one when the other broke. Print it twice for both sides of th mic. Piece to screw and clip. Works well and is solid.…
Introducing the "Advanced Shock Mount For Fifine AM8T". This model is based on The Printing Pilot's original design with the addition of free movement. I needed to change the mount due to my partner having issues while streaming (Here is…
I wanted to reuse my Fifine (K670B) microphone stand with ESR Wireless Charger (HaloLock). 100% Infill, no supports
Fifine M6 Wireless Microphone started annoying me with its short battery life (it shut down in the middle of a meeting/gaming match way too many times). You can use the microphone with a USB-C cable, but then you have an annoying cable…
Welcome! I needed a nice modern headphone stand, and I saw this FIFINE Desktop Microphone Stand. It was designed for their microphone lineup, but I thought it could be great for me as a base for a headphone stand. I designed adapters that…
Hey All! This is a cable clip organizer, designed to be clipped onto the Fifine Boom Arm system. I've been using their mics for a while, but there is no place for the cable to go. With this cable clip , you can manage the USB cable and…
Printed with Creality Hi and Rosa3D Basic PLA at 0.1mm layer height
45° mounting screwed shaft with insert for @MrPresident AM8 Shock Mount
The FIFINE shock mount blocks the gain knob, and it's difficult to turn with adult fingers whilst in the mount. So I made this to enhance my grip on the knob... which isn't as gross as it sounds. This object was made in Tinkercad. Edit it…
Подвеска для наушников на микрофон FIFINE RGB MIC A9
Simple fork mount for Fifine K678. Use original or m4 bolts to mount on sides of mic. M5*16 for mount to thread part
FIFINE Ampligame A8 PLUS mount
Printing notes: Bolt holes may require light post-processing (sanding or drilling) depending on printer tolerances. Use ≥50% infill to ensure sufficient strength under high clamping loads. Printed with prusa MK3S, Prusament PLA
Double wire holder for fifine a6t arm (mic and headset wires)
Made this adapter for my Fifine 670B to mount it onto a Scissor Arm Stand. May fit other mics that have a ~22mm thread at the bottom. Requires a standard nut that comes with a microphone to secure it. My mount has no thread for mic, the…
horizontal adapter for orginal fifne mic stand print setings: -use support for main body -infill 20-25%
This is a custom print-in-place case for the Fifine M6 wireless microphone kit. It’s based on the Small Print in Place Box , but the entire interior layout was redesigned to fit the M6 components neatly. Variants V1 — with USB-A - USB-C…
Onshape link I sized this model to fit the pair of Fifine H8 headphones I got recently. If yours are not roughly 140mm in diameter and 40mm wide across the head strap, you can feel free to try messing with the model yourself in Onshape to…
This is a holder for the FIFINE AM8 mic for the TERTIAL LAMP. You need to use a 4mm screw and 2 4mm nuts. You also need to pause the print at set times, so that you can put the nuts in place, so they get printed into the structure. No…
Overview A desk riser that tilts the Fifine AmpliGame SC3 mixer 15 degrees toward you, so the faders, knobs and mute buttons are easier to reach and read from your chair. The mixer drops into a pocket between two side ledges and rests…
A converter that allows you to screw the Fifine AM8 PROS microphone directly onto the base of the stand. It allows you to screw the microphone directly onto the stand without using a telescopic leg. There are 2 files for printing with…
A part to replace the metal one with a 3d printed one, mine broke, so I made this, and if it happened to me, there's at least one guy who's also had this problem. Print with 75-100% infill and PETG or better, PLA will not work for more…
insert the nut and bolt that the finfine came with in the part then it works!
Didn't want to pay $30 for something that I basically had at home not using, which on top of that is $20 new, so I made the obvious choice of spending several hours to make this instead :D Glues together and mounts using existing hardware…
Fifine AM8 Samsung Monitor Mount A simple 3D-printable mount designed to attach a Fifine AM8 microphone to a Samsung monitor setup, helping keep the desk cleaner and freeing up space without needing a separate microphone arm. This mount…
Shock Mount For Fifine AM8T Microphone for 3/8 thread that comes with fifine boom arm.
Hello, This is my VERY first model. Ive been doing CAD for about a month now. This model mounts your Fifine AM8 microphone to the back of your monitor via vesa. It currently only supports 100 x 100 mm. Also another thing, the cable…
This is a custom print-in-place case for the Fifine M6 wireless microphone kit. It’s based on the Small Print in Place Box , but the entire interior layout was redesigned to fit the M6 components neatly. Variants V1 — with USB-A - USB-C…
Didn't want to pay $30 for something that I basically had at home not using, which on top of that is $20 new, so I made the obvious choice of spending several hours to make this instead :D Glues together and mounts using existing hardware…
Welcome! The Fifne AM8PROT mic is a great budget option. I've been using mine for a while, and at the 70 USD price point with a boom arm, it's a really good budget option. But one thing was wrong with it: no shock mount. The mic is…
Introducing the "Advanced Shock Mount For Fifine AM8T". This model is based on The Printing Pilot's original design with the addition of free movement. I needed to change the mount due to my partner having issues while streaming (Here is…
Onshape link I sized this model to fit the pair of Fifine H8 headphones I got recently. If yours are not roughly 140mm in diameter and 40mm wide across the head strap, you can feel free to try messing with the model yourself in Onshape to…
![Fifine D6 Stand - No battery holder [Remix]](https://media.printables.com/media/prints/2b1f167a-37ac-43a0-a10d-1f1fc0e8b00e/images/13421929_bd952593-d3ca-4f0e-ad17-f04423a241d0_46739be3-7371-4dc9-b5b5-9955416e4611/deck1.png)
