Liczymy pasujące modele…
The Fireball is the racer flown by Kazuda Xiono in Star Wars: Resistance. Although it is introduced as a mostly wrecked ship with a tendency to blow up, it proves itself to be quite capable and mostly reliable over the course of the show.…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Fireball XL-5 (untested) flying model rocket. WIP NOTES: 12-5-18 - Added decal PDF file for printing a single and double set of XL-5 decals. Also included Silhouette Studio files if you happen to have one and want to cut the decals out.…
I took some existing designs from here and made a few customizations to turn them in game pieces for my Fireball Island Game. The ones that came with it are a little flimsy on the bases so I thought these would work a little better. Also,…
Scales to ANY size and prints with NO SUPPORTS! Partially Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
This should be suitable as a table lamp shade.
Replacement bridges for the boardgame Fireball Island (old edition) Print Settings Printer: DiscoEasy 200 Rafts: No Supports: Yes Resolution: 0.2 Infill: 10% Notes: Print the bridges upside down with support. The V shape bridge require…
This is a replacement landing gear (skid) for the SAB Goblin Fireball 280 rc helicopter The photo shows the actual skid next to the 3d printed replacement skid Sorry for the large file size, but I found problems with the print when…
Improved the one piece models for strength. The Fireball Dinghy is a favourite. When I started printing I was disappointed by the lack of detailed models of small sailboats. In particular few but professionals make a serious attempt at a…
Print with open side facing up. No supports needed.
The Running Man - Fireball - 1987 3D printable model.
One-piece cover to protect your 1010Music Nanobox Lemondrop synth . Or indeed your Fireball… but if you use it for that, sorry for the Lemondrop word embossed into it. It clips over the top and is held in place by little clip shapes at…
Adding to my collection of beer and liquor signs, I made up this Fireball sign. It is a quick print. Print it a .2mm starting with white, then red and finish with black. I have always enjoyed Liquor and Beer advertising since my Dad and I…
You like dice? Take a look at my Dungeons and Dragons Collection Why you need this in your life Have you ever cast the iconic spell fireball in D&D? If so, I'm sure you went nuts when rolling 8d6 or more for damage. But let's be honest,…
A pin based on the Gerry Anderson TV series Fireball XL5
Inspired by @CayleePender_4032542's model: https://www.printables.com/model/1514460-jagerglock-the-mini-jager-holder/files I like the concept, but I'm not a fan of Jager, so here is an alternative. The model is split design so the…
As I didn't want to print the original with supports, added some fire :D
This loading block is sized for the .221 Remington Fireball cartridge and works with all of the .222 Remington longer or equal length derivatives. 20 mm clearance is provided for powder funnels. Look for my .222 Remington loading block…
I use minimum number of organic support but none on the sails above the lower edge.
Fireball Tool Mega Square welding assistant customizable size.
Nine-Tailed Fox with a Fireball Wall Art
Das ist ein Minecraft Fireball Ghast Coin.
More requests: Fireball Tool logo and both current and vintage Clausing logos
Remix of https://www.thingiverse.com/thing:3824411 . The original model is unchanged, but I created a 3mf project in prusaslicer to capture the following changes: Lay flat Shrink XY to exactly 203.2mm (8 inches), instead of slightly more.…
This loading block is sized for the .221 Remington Fireball cartridge and works with all of the .222 Remington longer or equal length derivatives. 20 mm clearance is provided for powder funnels. Look for my .222 Remington loading block…
Fireball logo for the Faculty of Engineering of McMaster University. Looks best with Concentric layer pattern.I printed in yellow/gold color, then used red permanent marker on top layer and edges. Check out my other McMaster University…
Add bold personality to your clog shoes with these 3D‑printed fireball 🔥 eye charms. Designed with a spiral ꩜ flame geometry, they fit standard clog holes securely. Each charm brings a playful, fiery look to your footwear—ideal for themed…
Needed some way to hang my Fireball Tools Minion Squares with the rest of my welding clamps, and to keep the tabs and screws from getting lost. This tray is my answer. It can either sit flat on a bench/shelf or hang on a wall with a #8…
Made for 1,3 kg fireball (type CON-ZPB-0130 - you will find in on the internet). Printed in PETG with 20 % infill, diagonal like shown. Made for two M5 screws.
Great Fireball Rune! Enjoy your GFB Rune Keychain! JUST ADD LAYER CHANGE!
Ornaments of Logos/crests of McMaster University located in Hamilton, Ontario, Canada. The Fireball logo represents McMaster Engineering. Check out my other McMaster University Models in this collection:…
This is Fire Ring has been remixed from MZ4250's Fireball Radius Ring ( https://www.printables.com/model/77512-fireball-radius-ring ). It has been scaled to a 6" radius (12" diameter) the "bottom" of the ring has been made wider and…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x162.07mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm…
My kid has the LEGO Minecraft The Nether Portal 21143 which has these flat disc fireballs for the Ghast but it only came with 2 so I quickly made some up just in case she loses them. They snap on to legos just like the original and i also…
UPDATE 1. July 2026 Included Fusion360 design file for anybody wanting to edit this model. I made a bottle prison for the 70cl Fireball bottle. to make it you will need; 1 x “base” part 1 x “top” part 1 x “lid” part 4 x feet (TPU) 6 x M8…
This pawn is a step file, kindly shared by squar3d. His scan allowed me to modify the base. This is a work in progress, I will try and clean it up bit by bit. EDIT: 2/26/18 - I uploaded a repaired/decimated version. It is reduced to 100k…
My pin already came with a broke plastic, but the issue is the ball likes to launch off the ramp and wedge in between the plastic and glass. This should protect you current plastic from getting cracked and/or from the ball getting wedged…
This is a scan of the Fireball Island game board I did with the free version of Skanect and an Xbox Kinect. The limited faces might reduce the quality of the board, but the original scan was pretty clean. I don't have any rights for the…
Tacking Bolt organizer for the Fireball Tool Welding Fixture system
Unleash the power of mystical flames with this commanding warrior STL model that brings epic fantasy adventures to your 3D printer! This detailed figurine showcases a hooded fighter in dynamic armor, complete with flowing cape and…
This is a basic Gridfinity tray to hold either the tacking bolts (p/n FA75-BTA200), or the alignment pins (p/n FA75-BTP200-4BDK) from the Fireball Tool 3/4" fixturing system. There are lots of different ways these could be oriented; I…
I designed these holders primarily to keep the bench clamps for my welding fixture table from being piled in a drawer, and up out of the way but still easy to access. I have a ceiling beam running across part of my workshop which was…
For holding the Edge location tab kit that comes with the Fireball tool combination square. Fits in your toolbox! Was going to make toolbox gridfinity but am busy building other stuff. Printed mine 15% gyroid infill, PLA
Model is slightly different than the picture, I changed the slot width for the double row washer and made 4 of them.
Uses 5 15x3mm Magnets I printed mine with Fuzzy Skin on the sides to hide the layer lines.
Fireball logo for the McMaster University Engineering Society. This logo is distinct from the other more well known Mac Eng fireball (I have a model for that too). The MES is primarily composed of fun students. There are three models…
This is a basic Gridfinity tray to hold four of the standard 1" square post pins from the Fireball Tool 3/4" fixturing system, part number FA75-SBS120-4BDK. Oriented vertically, these should fit well alongside my trays for the 4" fence…
Remix from https://www.thingiverse.com/thing:2860197 , filled the small holes and added a larger one for a bolt. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament:…
This is a basic Gridfinity tray to hold the standard 4" fence block from the Fireball Tool 3/4" fixturing system, part number FA75-SBS420-BDK. I thought about orienting these vertically to save a little bit of drawer space for use in tall…
This is a basic Gridfinity tray to hold the 3" extension block from the Fireball Tool 3/4" fixturing system, part number FA75-MBV302-BDK. I thought about orienting these vertically to save a little bit of drawer space for use in tall…
Stamp with mystic symbol for paper or clay.
This is a basic Gridfinity tray to hold the 6" extension block from the Fireball Tool 3/4" fixturing system, part number FA75-MBV605-A1-BDK. At 1x5 squares, it does take up some drawer space, but this block isn't going to fit vertically…
This is a basic tray to hold the accessories included with the Minion squares from Fireball tool. It fits all of the tabs and thumbscrews for one pair of the squares into 1x3 squares. Like my other Gridfinity models, the base is altered…
This is a basic tray to hold the accessories included with the 4" Monster square (which is the smallest size they offer) from Fireball tool. It fits all of the tabs and thumbscrews included with one of the squares into 1x2 squares. I…
This is a basic Gridfinity tray to hold spare stud pins from the Fireball Tool 3/4" fixturing system, part number FA75-PNB768-4BDK. I looked at different sizes of trays, and to be honest, I would have preferred to pack them in a little…
This is a basic Gridfinity tray to hold the standard length tooth block from the Fireball Tool 3/4" fixturing system, part number FA75-TBM821-A1-BDK. At 1x5 squares, it does take up some drawer space, but this block isn't going to fit…
This is a basic tray to hold the accessories included with the Mutant square from Fireball tool. It fits all of the tabs and thumbscrews included with one of the squares into 1x3 squares. Additionally, I included a space for an extra "L"…
This is a basic Gridfinity tray to hold the 1"x2"x6" fence block from the Fireball Tool 3/4" fixturing system, part number FA75-SBS620-BDK. At 1x4 squares, it does take up some drawer space, but this block isn't going to fit vertically in…
I acquired a Fireball Island board, with no pieces. I wanted to put it back together, but doing so would be very expensive. I was inspired by spotzero's statue http://www.thingiverse.com/thing:293228 and by squar3d's figure…
Remix of https://www.thingiverse.com/thing:3824411 . The original model is unchanged, but I created a 3mf project in prusaslicer to capture the following changes: Lay flat Shrink XY to exactly 203.2mm (8 inches), instead of slightly more.…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
Model is slightly different than the picture, I changed the slot width for the double row washer and made 4 of them.
Tacking Bolt organizer for the Fireball Tool Welding Fixture system
Uses 5 15x3mm Magnets I printed mine with Fuzzy Skin on the sides to hide the layer lines.
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Double Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/519398 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
