Liczymy pasujące modele…
Low Poly Howling Wolf. Print Your Pack!! Great for Testing Input Shaping!! Thank you Thomas Sanladerer for the feature ;) Commercial Use License: https://cults3d.com/:1225367 65 cent Donation: https://cults3d.com/:1225394
*** Free to print, NOT to sell *** Thanks to sunset and sunset_3d_design for uploading this great model! UPDATE 12/11/2023: Added v9.5. Fixed the fused segment from the new PrusaSlicer updates. I moved the “Spikey” models into the archive…
MakerBot's T-Rex Skeleton is a masterpiece. Too bad MakerBot has ignored fans' long-time cry to fix some obvious and critical issues. Thus I made the following fixes to make the model printable: --I fixed tail parts A and B. Tail part A…
6/10/2023 - 2.7 posted. Thanks to SuperRoach for pointing out the floating pieces in PrusaSlicer. With the latest PrusaSlicer RC1, it renders the bottoms of the gills on the left side of the head floating. That wasn't the case previously.…
This is a remix of a crystal dragon, which fixes the first two elements after the head (they are merged together and not movable in the original model) Features Articulated Looks best in Rainbow PLA Recommended print settings Layer…
NEW FIXED FILE !!! This was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
This is a remix fix of an origional model by cashkotulka . They deserve all of the credit. I'm just making fixes so more people can use it. On my printer I'm able to print it without supports. Might want to add a few walls/parameters so…
Remix of Val's Grogu from Mandolorian Original model https://www.thingiverse.com/thing:4038181
Repaired mesh iteratively in meshlab so prusa slicer could print it. Will update with photo of print once it is done. Category: Scans & Replicas Note : should print fine in Prusa Slicer after error correction. May not print in certain…
The best companion for holding small items and looks adorable! Prints in TPU too!!! Commercial Use License: https://cults3d.com/:1225970 65 cent Tip: https://cults3d.com/:1225958
When I loaded the file in Prusa Slicer it detected ~1800 errors. So I ran the file through Netfab to fix those. Nothing fancy but it might save someone the 5 mins it takes to run it through Netfab. Sunset owns the rights to this.
3DCREATION This is a remix of Satsana fun duct optimized for use with stock fans. UPDATE --> VERSION v2 WITH MORE SPACE FOR X ENDSTOP Main benefits of this model: no need for support easy to print weight 60 grams ready for…
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
I modified the popular Fidget Switch and added a loop to it so you can hang it on your keys because you need to have this with you all the time.
Fixed some issues where it was fusing in the last few vertebrae Will print well with 0.6 or smaller (not sure for 8mm ) Simple remix/remake/Fix of the original model made by sunset Guarantee no fused vertebras (unless your printer is not…
The original articulated octopus is extremely hard to print, this one creates rings that act as a partial brim.
:IMPORTANT THREAD / BOLT INFO: I had to scale the clamp bolts up in size about 1-2% and the bolts for the base about 3-5%. That's what worked for me and FOR MY LIKING - everybody's setup is different, your mileage will vary, everything…
***I made an updated version that should fix the slicing issues. I added the model here, but for the full page and description, check out the fixels 2. no supports required at all, much easier to print*** This is my current version of 3d…
Fixing the CR Touch Error on Creality 3D Printers Hello everyone, Recently, I encountered the common CR Touch error. After extensive searching on the internet and trying all the suggested solutions, I unfortunately didn’t achieve any…
This model was uploaded on makerworld but did not work with prusaslicer very well. I painstakingly repainted it for 2 color mmu printing on my Prusa XL. Enjoy
This is a remix of the Articulated Ice Dragon by p1lotz . In the original upload, the last segment and the tailpiece were slightly stuck together. This version fixes that, and I also added a version with no arms and Low-Poly versions: The…
"Articulated Crystal Dragon by Saber3D" had a few versions, namely the original and an "Updated" set of models that has better/thicker connecting rings. The "Updated" models would not load in PrusaSlicer with the correct multi-material…
Hi ! Fixing clip for the leveling wheel of the Elegoo Neptune 4 Pro 3D printer. It prevents the wheel from turning due to vibration. Over time, it also appears that the wheel is trying to turn even with the clamp. But this is a simple…
This is the amazing moon lamp by Frank Deschner, with the STL bug fixed. It prints flawlessy as the original, but you don't have to worry about the nasty layer messing up with your printer and fan, in case you slice it with anything other…
Scaled down version to fit on the Ankermake M5 Cura Slicer to scale down model
this was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not endorse or sponsor this project. dm me for more models, happy printing
…Please be sure to hit like & post a make, I'd love to see your prints! (Also be sure to share the love with the original author!) Here's a little remix of this fantastic model to make it easier to print & assemble. Print as per the cut…
The original model was impressive. The author vandragon_de has made a version without holes for bathtube use, but it has some missing solid geometry at the propellers, so that it won't be properly sliced(with CURA). so I fixed the issue.…
Spacer for stable TPU printing for the QiDi Q2. In the stock setup, there is a 2.6–2.7 mm gap between the front wall of the feeder housing and the drive gears, where soft TPU filament can sometimes slip out. With this spacer installed,…
I've decided to try and model/print as many CS:GO knives as I can. I am trying to get better at modelling in Fushion and this is helping a lot. Any advice or criticism is welcome and appreciated. Let me know if you print it! Print…
This cute little owl with a fixed bottom for better adhesion and easier printing. The original has a very rough bottom which causes problems with the first layer on many printers. This is now fixed. G-Code included
A redesign of Zach Freedman's jumper wire comb so it doesn't require magnets. Should be fully compatible. The included picture shows both my comb and Zach's original in one of my bases. Changes: The base is one piece, rather than two. The…
I first fixed this bust of David by filling some weird holes it had under the top eyelids which would create some imperfections in the print surfaces as well as create some unneccesary overhangs. I also sliced this model to print it in…
A functional replica of the Steam Deck Repair jig seen in Valve's Steam Deck Teardown Video . Handy for keeping the Deck stable while upgrading the internal SSD or replacing drifting thumbstick modules. This is a remix of ryohazuki224's…
This is a fix for just the inner detail stamping part of LettucePrint's Totoro Cookie cutter . It extends the details on the chest down to the buildplate so they can be printed without supports, and fills those chest details in solid so…
I noticed some issues with the model when getting ready to print it. I could not find any other models that addressed theses issues or even any comments that reference these weird issues. I used MeshLab to select the vertices of these…
This is a remix of a remix i made improvements so the iris would stop coming off track and jam. Here is the description they posted with the original model about how to print and process. (This is a smaller, 4-leaf redesign of emmett's…
Fixed Version Hi everyone. I'm P1lotz, a Danish student who likes to make 3d models. This time I have made a dice box, with gears. I wanted it to open like a Venus box, but be the shape of a hexagon like a D20. For more excellent boxes…
Took the really nice design by andrewSORG and fixed the interior so the hole gets thinner. This way it can easily hold slims. Category: Props
Original files would throw errors when opened and wouldn't print. I simply fixed them in meshmixer. I printed mine at 100% size but since I have a giant head I probably should have gone a tiny bit bigger. Still fits, just a bit snug.
The Thing remix because the base as an artifact on the original model. This is ok and print is nice now on the base.
(Imported from Thingiverse - It's a remix from Toothless HTTYD by farkas00 - Thingiverse ) The cute and incredible Toothless from How to Train Your Dragon This remix made in Meshmixer fixes the previous problems with the eyes, tonge and…
Low poly skull that's easily printable with vase mode (choose cut version to make a bowl) I fixed bottom nose overhang angle, it's now prints without gaps Also, bottom surface is now flat and without low steep overhangs Full model has too…
UPDATE: I fixed the chihuahua's front legs. To make them stronger. Old model deleted…. Low poly čivava dlouho jsem scháněl pěkný model čivavy. Nebyla žádná milá, která by za to stála. Jen ne moc hezky placené. Rozhodl jsem se tedy vyrobit…
Pey's design does not fit my drawers well and requires severe modifications to make them fit after printing. I had to saw more than 3mm off the back and sand around 1.5mm from the sides. I wanted to do quite a few drawers so this was a…
This is a remix of https://www.thingiverse.com/thing:5147572 by ItsVops to fix the tail from breaking. Print needs support.
Fenerbahce SK's 5 Star Logo.
Monograms are approx 128mm tall and are (4) four layers thick (Approx 8.5mm) and can be printed as a single color or multi color print. Change filament during printing to achieve multi-color prints. Files are a remix of cnc file from Ma…
Not my design, remix of ( https://www.thingiverse.com/thing:3388581 ) This fixes issue where figure wasn't flat on the build plane. Rotated -0.2 degrees to make it flat and cropped a bit to prevent overhang around the edges. Also:…
Added a mounting hole for a nail/screw in the base and made sure the base of the head was actually flat. The original remix's head was slightly askew. Photo is printed at 200%. Category: Sculptures
There are several problems with the original case, this remix aims at solving them all: - Can't enter dfu - Can't connect and disconnect battery - There is to little space for the battery (thickness) - The battery pushes onto the gps…
Wanted to make this model work since it looked so good. Fixed the model to sit flat on the bed and re-cut the socket so the ball will fit since the original model had an error. Also uploaded mirrored versions since this model is not…
The original model threw up some errors while importing, so I ran it through fixing software to get rid of these errors. Fixing took quite some time, so by uploading this remix I hope I can save someone some time. All credit goes to…
same model but exported as separate files as the original STL file won't work in Cura Slicer.
Cracked D&D dice set (D4, D6, D8, D10, D12, D20) fixed and optimized for printing
This is version 2.0 of the dice tower I remixed. Version 1 was nice but you could not drop more than 1 die at a time and even then they might get stuck in the throat. I am using the official Alien RPG dice. I took it into Meshmixer and…
A really nice design by Mit_Upadhyay. https://www.thingiverse.com/thing:4108242 I got the problems when slicing the model with cura 4.4.1. Therefore I cleaned the mesh using meshmixer. Also I added a hook in the back to hang the model on…
I use a 20 mm M3 bolt to hold the rear sight in place. Mount on the picatinny with M4 30mm.
This is a fake phone i made for the ‘’back to school'' The idea is that you use it to put it in the phone box in school, so you still have your real phone :)
AAA Battery Storage Box (fixed lock mechanism) By theodecarvalho on Thingiverse
The main goal for this mod is that I can clean the nozzle after I pause and resume the print, which is usually make small leakage of nozzle. You need 2 heat insert for the brush holder, to fixed the holder on the frame mount. Another 2…
This is a 3D printed fixed equatorial wedge for the ZWO SeeStar S50 telescope. It is supposed to be mounted between the ZWO provided tripod and the telescope itself and lets you use it in equatorial mode, without the field rotation…
I made a collection of bunny's mainly for eastern because its a hassle to open like dozens of thingy pages, scale and fix them, then fight the download. Also 4 models got lost thanks to people deleting their account, i think its because…
Is the wand on your Dyson vacuum all loose and jiggly? Well, this is just the fix. Designed to fit into the wand end and take up some of the slack. Over time my Dyson vacuum has worn out and become quite loose. I designed this spacer to…
The original thingiverse post (https://www.thingiverse.com/thing:4723570 ) had an amazing model by the user Kuro ( https://www.thingiverse.com/kuro2/designs ). The main issues are that the model files are not split, making it harder to…
I made these sights for my airsoft replica of the G18C (but it should fit any picatinny rail) because I did not find any that I liked. It's easy to slide on the rail and it doesn't move after it's been installed. I'm using Planetler's…
This is just the same file from haitianboy420 but was fixed so that slicing should be fine with no missing parts as mentioned in the comments on that item. For image shown, 100% is on the left and 275% is on the right. Print Settings…
I merely changed a small thing that I think was breaking the feature tree. All credit goes to the original creator, I uploaded this in case others might find this useful as I loved the parametric box. Tell me in the comment if you find…
Combines the benefits of free-hand sharpening and a fixed-angle system. It takes less space than a full fixed-angle system, allows you to use any stone, and is quicker to use. Just put a knife on a magnet, set the angle with a screw, and…
I failed the print of the box for the original model 4 times due to the lever/hinge printing in thin air + being a small, rounded, over-hang. This is a good receipe for failure, at least at higher speeds. Instead of slowing the print down…
took ChrisThePropGuy's corey taylor mask and resliced it in meshmixer to be able to print it in 2 pieces as his mask stl was broken. Category: Other
I repaired the model with 3d builder as the model had impurities, and i also split the model in half with also flag separate for easier print and glue with blender. Next up is to make sails thick enough for a common 0.4mm nozzle to be…
Updated 01/28/2024, 28/01/2024 for the rest of the world. I saw a few comments stating that the mounting/starting chain link was causing collision issues with the side of the printer. I went ahead and made some minor changes to the model…
A fixed AR-15 style, mil-spec buffer tube that attaches to Picatinny stock interfaces. Printed in a single piece lying flat for incresed sturdiness. Mounts with two M5x30 bolts and M5 Hex nuts. The tube has 4 postions for the stock to…
Will fit spool width of 45mm-110mm (~ .5kg - 2kg spools) Copied from original model by Copanko : Necessary commercial parts 4 stainless steel “608” bearings. These are the same as the spooler bearings that come with the Prusa MINI. 8 cap…
Artful From DIE OF DEATH. Print in PETG like my man Mr.Make_It says you should. Second figure to have accesories without update to add them (First was Nosoi Vessel and Tree). You can print “Implement” and “CopyWrite” in PLA. 12/16/25 UPD:…
Just a cute and simple to print working cat bookmark! Print with 0.15 layer height and with ironing if wanted. If you want it larger or smaller just simply adjust the size.
Aero-X25 Drone: Fixed-Wing UAV for Professionals and Hobbyists The Aero-X25 Drone is a state-of-the-art fixed-wing UAV designed for exceptional performance, modularity, and versatility. Its lightweight construction and innovative X-tail…
This is a complete of fixed fences for positioning items on the xTool F1 Ultra. This set consists of straight, right-angle and cross fences in all relevant sizes. These are held in place with standard m4 thumb screws.
Replaces the rotating coupler with a fixed one - if you intend to mount you spool holder on the side of the printer, you might be printing the Side Filament Guide Arm for P1P instead BOM 2 x original screws for PTFE coupler 2 x PC4-M10…
*This is the updated version of my previous design in-order to make printing and remixing easier. Fixel 2 This is a print in place, expandable, fabric that doesn't require any supports. This design is made up of hexagons with small ball…
NOTE: This print was designed for and tested with 3mm thick acrylic panels. If you are purchasing a panel set from Printed Solid, be aware that they have changed their material thickness to 1/8" (3.175mm). I have generated new model and…
Creator: Tamraz https://www.thingiverse.com/thing:1092181 I fixed the electronic part of Darth Vader armor.
I liked the Idea of edgaralmeida_2256375, but the Design had some problems, so I fixed them.
The O in ERROR was slightly higher than the rest and I didn't like the Base. I would suggest printing it face down.
This is a remix of an existing model. I just fixed some issues with the STL and rotated it so it could print better. Printing without supports appears to work just fine. Category: Costume
Use organic supports and support blocker
The witcher Headphone Stand (parts)
I super appreciate Ben and others that create great stuff for the Packout system, but got tired of trying to scale the front bin to fit correctly when I needed one. I also tweaked the other bins to remove the “V2.0” text on the bottom,…
A remix on @DigitalTeache 's Dice Book. Instead of sections, it's just hollow.
There were some problems with the original, so I fixed them Category: Video Games
I've seen some comments about the issues of the provided supports and I was requested to post up my file that I've had success with. This orientation and support placement has always ended successfully on my Mars Pro with the smallest…
simply adding ready to print stls instead of obj that had issues with orca
Just import the model into prusa slicer. The main body already has a fuzzy skin modifier on it. Change it however you like it. Eyes and horns wont be fuzzy. Please print many poros and share your makes :-)
A revamped version of this cute little model by Riddellikins. Some parts need to be mirrored in your slicer. The structural stability has been improved by locking the rotation of the main pivoting leg assembly. Feet and center mast are…
# Airsoft only # Airsoft Hi-Capa 5.1 fixed outer barrel, 2 versions: Normal version Threaded version Tested with TM stock and Airsoft Masterpiece HopUp chamber.
One version is installable and removable without sliding it out to the side, the other is slide-out only. Best printed in PETG. No support needed. --- Eine Version ist ein- und ausschwenkbar, ohne den Haken zur Seite herausschieben zu…
Print in PETG with tree supports or risk getting Void-Rushed. For the Extra Parts, the head with the hole on the back in for an insertable void crown. Theres also the crown by itself and a head with the crown on it. UPD 1/10/26: changed…
Blue Beetle Movie Helmet (Fixed) 9/19/23 Blue Beetle is an upcoming American superhero film based on the DC Comics character Jaime Reyes. 1.- Uses 37 1mm x 8mm Magnets 2.- For sizing I recommend using my FREE Heads for Sizing here -----…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
![Conversion kit for the Spine cable chain for the SV07 & SV07 Plus [Fixed]](https://media.printables.com/media/prints/602642/images/4795554_3c8b74be-3e7a-40f7-82f2-7985236209f0_f71f2402-dfc7-4936-b991-5c3a62342dc2/20231003_230737.jpg)
