623 modeli
Simple protective case for the Flipper Zero Wi-Fi Module v1 development board. Flipper Zero Wi-Fi Board Docs: https://docs.flipper.net/development/hardware/wifi-developer-board Models Available: Full Case Requires 4x M3 screws/nuts for…
**9/26/22** Updated model that uses 4mm screws with larger hinges and a small insert for an SD card in the top shell. Enjoy! Might revise the hinges since they seem like a weak point. I needed to drill the holes out a bit but other than…
BEST PRINTED WITH PETG I modelled this in Blender while making sure it can function when printed. All you need is glue to glue the two hinge parts together while inside the handle and blade. It should take around 4-5 hours for 100% infill…
Remix from fivesixzero -Case for Flipper Zero Wi-Fi Module v1 minimal case, added the SD card reader cutout to the back of it and added an easy way to press the power and reset buttons since they were a bit hard to press. Link to the SD…
A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…
Introducing the Finger Fidget Flipper : a revolutionary way to stay energized and focused throughout your day. This finger roller flips through your finger like a coin, providing an irresistible challenge that can help reduce stress and…
This is a complete remodel of the Flipper Zero case. It uses another type of hinges, as the original ones tended to break off. Its also slightly smaller. It prints with no supports. I used M3x20 screws. It might help to drill the hinges…
New! Version 2 is up, with a more robust ladder kickstand :) As seen on HotMakes episode 148, it's a little firetruck with a hinged ladder and chunky wheels! Video link: https://www.youtube.com/live/jzZMH5YQIHc?feature=share Gratuitous…
I present to you the cover that I modeled directly around the official 3D model of Flipper Zero. The thickness of the bumper is 2mm It was made with a very soft TPU due to the wrapping surface of the case and the difficulty of inserting…
The only other TPU case for flipper zero did not cut it for me, so had to create my own. I would recommend printing this in softest TPU possible, as it might be a bit hard to put it on the flipper. history v1 initial release v2 wider…
This latest design has major improvement on the hinges and the latch. Design features choose between 1mm or 2mm thickness hinges use printer filament as hinge pins hole for lanyard locking latch access to ports iButton LCD display…
I decided to upload the Flipper Zero Case from Shutdown on Thingyverse with insert from RobbS since I couldn't find it here on printables. :) If I just did not see it, please comment with the link to the model and I will delete this…
This is the shell of a flipper zero. Front and back plates so anyone can make their own custom version
Flipper Hard Case V2 of.stl is a open face case for a Flipper Zero to access the screen, buttons, USB, IR transmitter and GPIO pins. Flipper Hard Case V2.stl is a full hard case This version does not require hardware as it uses folding…
Reloading primer flip/flipping trays. The flip tray comes in three sizes: 50, 100 and 125mm (2", 4" and 5"). For reloading with standard primers the 100 mm tray is great (common used size), but reloading with Federal, the larger 125mm…
This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut. The screws needed are M2x7mm. I also made a version with the Marauder Skull logo on…
You need foam from the shipping box and M3x30 screws. I know there is another ready-made model but it didn't suit me so I made my own.
Listed below are some changes that were made. Switched to use M3x25mm screws, nuts, and optional washers. Moved the Flipper Zero to the bottom of the case and moved the devboard compartment to the top. Added Flipper Zero text & logo to…
The Flippo Fidget A nice fidget that also works for practicing lighter tricks. The .3mf and .step models are split up for easy multi-color printing. Print settings Print in the provided orientation. Layer height: 0.2mm Supports: no Brim:…
i just made a cap to protect the pins of the WifiDevboard on the move you can find the Flipper wifiDevBoard case here
Easy to Print. No Supports needed with PETG, and I printed at 100% infill - just to make sure that it is extra rigid, and the standoffs stay strong. Print one each of the parts except for the button - where you print two of them. It snaps…
To print with two colors with a monocolor printer: You need to add M600 command after the first layer to change filament color. Then add an M600 after de second layer to change with the previous color. Layer thickness: 0.2 mm
I was tired of wasting filament and time for printing several different models of this case which had very weak hinges and broke instantly, so I fired up Sharpr3D and fixed the hinge issue myself. There is also a clip to close the case…
This a remix and modification of Ric Tru's Remix of yanev's design https://www.printables.com/prints/39729-tool-box-parametric I have reinforced the stubs and expanded the box to fit both flipper, WiFi dev board and some extra room for…
Remodeled from another! I printed in Prusament Galaxy black. It now can fit not only the flipper, but also the wifi dev board! Also, there isn't really anything holding the board itself, so get creative! Just needed this one quick. Ill do…
Case for my CC1101 attachment for Flipper Zero and Spacers. Use some white filament and flatten it for the led diffuser. Printed with eSUN PLA + Black on the below textured sheets Smooth Triangles https://s.click.aliexpress.com/e/_mrFsNmm…
The popular Flipper Zero case is back with new enhancements—no screws, no threaded inserts, nothing. You need nothing more than to print it and have fun! It's not mandatory, but you can seal the side of the hinge if you wish by melting a…
I felt the port was too small and wasn't accommodating some of my cables, so I increased the opening and also increased the opening of the sd slot and the pins, to show the labeling.
A lot of people, including me, saw the original model for this fabric and loved it for everything other than the fact that it had to be printed with the top surface up which made it way more difficult to print. So, I edited the original…
- Flipper Zero Short Base(7cm) - No Text - Flipper Zero Long Base (10cm) + Text Printed in PLA Fits Flipper Zero with silicone bumper No infill required Layer Height : 0.2 / 0.28mm 5 Top/Bottom Layers 3-4 Walls Minimum Print on side with…
Introducing Flippy, the enchanting articlating sea turtle! Flippy glides through the wataer with graceful movements, its articulated joints bringing it to life in a mesmerizing display of oceanic charm. Crafter with precision and care,…
I combined both styles of the original model's case as I preferred it this way. Both STL and STEP files are provided. The case needs short M3 brass inserts like these . You need to drill the m3 holes on the lid, as I included a layer so…
Introducing the Flipper Zero WiFi Developer Case, meticulously crafted for seamless assembly with just a click and snap mechanism—no screws needed. The design ensures an astonishingly precise fit, marrying functionality with elegance in a…
I made a desktop stand with charging for my flipper zero
Flipper Zero hard cases 2 versions of a hard case for the Flipper Zero. Flipper_Hard_Case_open_top.stl is a open top face cover to access the screen and buttons. Flipper_Hard_Case_top.stl is a full case version Required hardware: 2x M2.5…
Logitech G29 flipper extensions specifically made for a Nardi 330mm deep corn.
This is a remix of @Beaver's original and @Gugowski's remix: This is mostly @Beaver's original design, but made more narrow like @Gugowski's <25mm idea (great idea btw!) I liked @Beaver's cable management orientation better so left that…
Don't you hate it when you take off your snap case and you've nowhere to put it while you're gaming? Fret not - this screen protector allows you to store it on the back of the device while in use. You'll never lose it, and it still…
This screen protector was redesigned from the ground up to fit the Miyoo Mini Plus (and the original mini), with the goal of making it even more practical with the following new features: A cutout for a mini jack so you can keep in your…
I made a Gasket for the Flipper Case 1.4mm and 1.5mm in height You can try both. i use the 1.5mm-height one Print with TPU at 215C and 0C Bed. You can find the Case here: https://www.printables.com/de/model/204882-flipper-zero-case
This remix of beebo's designs fits well into Kermit's top half flipper case. It holds the wifi board snugly and has space for the pins so they aren't rubbing up against anything. This cutout was designed for fivesixzero's protective case.…
One more for the CSHMFSEU (Clockspring3D/Hot Makes/Filament Stories Extended Universe)! Presenting an ambulance remix of the awesome Hot Makes/Filament Stories Flippy Ladder Firetruck to complete the first responders set. Original…
SnapBumper : Install easily, protect and keep the beauty of the WifiModule visible Compatible with Case V2: https://www.printables.com/model/405220-flipper-zero-case-v2
This is a remodel of the Flipper Zero case. It uses groove to fit flipper zero with its silicone case and also deeper groove for text so it can be easily inserted and printed. Its print with no supports you gonna need 8 M3x20 screws.
UPDATE Bottom , Right top, Right Lid and Top left lid modified - Fitment / Dimension issues resolved. print temp= 210c print bed= 60c filament needed= +/- 380 grams Will need light filing to smooth edges after printing. Wifi Dev board…
This is a folding knife design i have created in OnShape, which flips open and locks. I have designed the knife with a 0.02 - 0.03 tolerance depending on the spot. if the tolerances are a bit too tight you can just sand down the pins with…
I have created a grip which is exact (scaled a few milimeters up) shape of Game Boy Color
It's a simple case for the Flipper Zero 3-in-1 Expansion Board Parts needed to build one 4x M3x10mm Screws
Every firetruck needs a police car buddy so I designed this remix of the awesome Hot Makes/Filament Stories Flippy Ladder Firetruck by Clockspring3D. Prints on its side without support just like the original. Original Clockspring3D Flippy…
Umbrella Corporation Tool Box Multicolor and Multipart with Flipped Logo is a 3D printable model that lets you create your own tool box inspired by the Resident Evil franchise. It is a remix of the Tool box parametric model by Yanev ,…
A simple & elegant stand for the Flipper Zero . Print Instructions Anything will do. Stand in the picture was printed with 0.2mm layer height , 0.6mm nozzle . The fit is pretty snug. If your printer isn't precise then scale the model up a…
A 1x3 Gridfinity unit for storing your Flipper Zero.
Reinforced Version of TruTech's awesome Flipper Zero Case with f4r0kh's Wifi DevBoard Cutout on Top. Bottom fits the Flipper with TPU Cover. Since the holes for fixing the clips were still too thin for me, I reinforced this area a bit…
This is inspired by the AMS2 Flipper created for the Bambu Labs AMS2 system by Jakob_K_Design. Original design here: https://makerworld.com/en/models/1363398-ams-flipper-better-access-to-your-p1s-x1c#profileId-1408595 I modified their…
This bumper for Flipper Zero was designed specifically for all the transparent variant or customized transparent mods. The cover is 2mm thick and to facilitate insertion, I recommend using filaments that have a hardness equal to or lower…
I made this design which is inspired by the flippable case for the regular Miyoo Mini found here: https://www.printables.com/model/240152-miyoo-mini-minimal-flippable-screen-protector I wanted to make mine flippable as well, but due to…
i played around with the weights and the design to make this as easy to print and assemble as possible and flip good. i printed in pla 0.4mm nozzle at 0.2mm layer height but it should work with any other settings and filament. this is the…
I have made a custom slim case for my external SubGHz module for Flipper Zero. There are various types of SubGHz modules for Flipper, so please check the link below or the photos to make sure it fits yours. I have printed mine using a…
I only had M2.5 screws on hand, so I adjusted the holes to be self threading. I used M2.5*8 screws that sit pretty flush to the front and back. Included versions of the top with no letters on the buttons, and one with letters baked in to…
Printed on Bambulab P1P with Ariane Plast PLA+ NOIR MÉTALLISÉ Recommended settings: 0.1 X-Y (horizontal) hole compensation 0.2 Layer Height Auto orient all 3 files for better results Classic wall generator for pin_protector.step
wifi boad no sd card and no exposed Wi-Fi chip
Filled the gap causing overhangs at the base of the top and bottom parts. Slicer shows it as one piece. No supports needed at all for this print. I used a marble filament (215C nozzle, 60C bed) but my Cura5 settings need tweaking to fix…
A gridfinity container for the Flipper Zero with silicon protective cover Freecad files included so you can make adjustments.
It needs to be printed on SLA resin printer. FDM not tested.
I find it difficult to understand why so many people use these upside-down, given how much weaker they are for their intended use in that orientation. And yet, it's apparently popular enough that @Genghis' model , and @ericsnis' model…
This remix adds a bit more material around the bolts for the hinges and latches so that they are less prone to breaking when adding the M3 bolts. I used the original 4mm latch. I printed the case in PLA and the hinges in PETG. You will…
Keyflipper is easy to print thing for your keys you put it on your finger and you spin it it does need a 603rs bearing thickness is 5 mm and outer size is 27 mm inside doesnt matter as you need to buy it for your finger
This model is compatible with the lego system.
The Flipper Zero WiFi Devboard Case Bumper has been specifically designed to fit on the top of the case design by King and provide added support to keep the two parts securely together.
See these in action on my Instagram Butter-Fly Flippers are great butterfly toys for kids and fun. They are great pranks for kids as well! Put inside a book or box. When it opens they start flapping around. They are a very fast print,…
Use some white filament and flatten it for the led diffuser. Note the case has tight tolerance so if the module does not fit it is due to the prototype board not being aligned or slightly bigger. To fix this just sand the sides until they…
I made this case since I did not find one that I liked. I made this to store the Flipper Zero and USB cable in a strong but compact case. Other's that I've seen was bigger than it needed to be. Mostly because they are using the rubber…
@radakul 23 JUN 2024 This is a re-upload of the model by user WingedFuse on Printables.com at the following URL: https://www.printables.com/model/348239-case-for-flipper-zero-wi-fi-module-with-ruthex-thr/comments I have made absolutely no…
A minimalistic 3D printable case for the Flipper Zero Wi-Fi Dev Board . There are two variations of this case, a larger XL version and a normal size MD version. The XL version has a larger under-cavity for addons such as a GPS module. The…
PRINTING SESETING: MATERIAL: PLA, PETG, ABS, ASA SUPORTS: Normal ADESION: YES
I converted some of the flipper logos to stl so I could embed them in my prints. Put your MMU to work. :D The backing is so that each “pixel” doesn't become its own model. I made the backing .01mm thick, so the slicer should ignore it.
Hello! This is a IKEA Skadis/SKÅDIS mount for Flipper Zero . There are many good ones but i wanted something more Flipper-shaped. There is a hole for the USB-C port at the bottom. Hooks hold up really well in PETG , did not try PLA . Make…
Print this, or don't. IDGAF All of my models I share are free and I use them. If anything turned out less than acceptable I change it or remove the model. You can print this laying flat (with supports) or in the default orientation on…
Original SMX Heinz design of the 3D printed slot 3.00 & 3.25 flipped travel kit. Designed to use with ABS filament. If you print with other filament you may have to adjust shrinkage compensation to get the correct dimensions. Installation…
Please do check out Sanford Prime 's original model here . They put a whole lot of work into this so if you havent tried it yet I personally suggest it!!! T I P S Print this at 100 percent infil Floats/Skirts or supports are optional but…
Another mega Brick accessory. Check out all my Mega Brick models here! This model is also available on Makerworld. Print it in PLA, PETG, or really any other material. No assembly required on this one – just snap it onto your minifigure's…
A compact three-arm flipper designed for smooth finger tricks and quick stress relief. 🔄 Perfect for flipping between your fingers to build dexterity 🖐 Helps with focus, relaxation, and finger coordination ✨ Lightweight, durable, and easy…
Made lightning flipper keychains for local tournament. Posting with and without Williams logo, so you can add your own logo.
Print Settings Printer brand: Bambulabs Printer: Bambu X1C Rafts: Doesn't Matter Supports: No Resolution: .28 or lower to get the logo details Infill: 15%
A little bench / Docking station for your Flipper Zero, with build in space for your USB cable to charge it Print on its side, so you don't need support, infill is not needed
Remix of J03's Hard Case for the Flipper Zero Added Magnets for closing Required hardware: 2x M2.5 x 10mm screw 2x 6mm x 3mm Magnets
Tired of looking like a DORK who plays video games while hacking the planet? Behold, the FLIPPhone! Now you can look like a DORK who plays with a flip-phone while you hack the planet! This case fits the Flipper Zero perfectly and still…
Note: This file may not yet actually work when printed! Reportedly, the posts of the case don't fit the holes of the dev board. Caveat Emptor! Description A remixed Flipper Zero WiFi Board Case with Flipper branding and labels on buttons.…
Info This case is made especially for the Multiboard v2 with ESP32 and AS01 NRF24 Chip on it! Its made press fit, glue is maybe required if board tolerances are too big. What you need to print: 1x Botton 1x Top 1x Slider 2x Button No need…
compact case for flipper zero and wifi module. you can find the COMBO CASE V2 Here
Made a cool case based off the Soft TPU Cover/Case and added a 22mm watch adapter so I could wear my flipper zero on my wrist! Photos of the prototype were sent by @ Antival3nt#0224 on the Flipper Zero discord.
This print is specifically designed for the basic WiFi board straight out of the box, omitting features such as the antenna and SD card slot. This creation is a remix of magdong's Wi-Fi Dev Board Case (…
This is a remix of Drive 's insert for Kermit 's flipper case - which was originally designed for the Minimal Case version of fivesixzero 's wifi module housing. I've modified the insert so you can use either the minimalist or the full…
Flipper Zero and Wifi Dev Board mount for the Ikea Skadis. The opening in the centre allows you to pick up and place the F0 easily, and is modelled to the dimensions with the silicon cover on. A slot at the rear holds the Wifi Dev Board.…
This model is compatible with the lego system.
I designed this for my wife's Honda, and I think that it works great! Enjoy your flipper on the go! Print Settings Rafts: No Supports: Yes Resolution: .16-.2 Infill: 20-100 Filament: n/a PLA n/a Category: 3D Printing
Standard 1 & 1/8 pinball flipper button. The thread is the same as standard flipper buttons so you can use the metal pal nut if you have it. You might have to drill out the retention clip hole to 1/16, I used a cut up paper clip for the…
Have you ever been so mad you wanted to flip over a table? This miniature table and place setting provide all of the relief with a fraction of the damage. Legs and top are printed separately and glued together for strength.
https://www.reddit.com/r/flipperzero/comments/11s77sw/fully_unofficial_external_subghz_cc1101_module/
