Liczymy pasujące modele…
A handy resistor lead bending tool designed for quick and accurate forming of through-hole resistor legs. 🔧 Includes: A 6.3 mm spacing slot – ideal for standard 1/4W Arduino resistors A 10 cm gap – useful for larger power resistors or…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
For best result I recommend 1 perimeter and 0.2 layer height with variable height around the text, so after color change there are at least two new layers. Also is good to use slow speed for perimeters to make text sharp.
Wydruk około 4,07 €–4,98 € nettoWstępna wycena jednego wariantu
This is a 3D printable file to get a component bender (CBH5). Series Description 0.3": 2 positions 0.4": 4 positions 0.5": 8 positions 0.6": 7 positions 0.7": 7 positions For bending of electronic components to a standard pitch size Base…
Tip/Donate Components for the game "Terraforming Mars" by Stronghold games; -"Player Cards" which sit atop (or in place of) the player card you use and play on for the game -"Cube Trays" that help hold together the different unit cubes…
Remix of https://www.thingiverse.com/thing:2988374 with a hole to send energy to heat. I al;so attached the sheet I printed that was provided as a comment on the original edition. For the grids, you have to use the one from the original…
The Holy Moonlight Sword trick weapon from Bloodborne, scaled to be a Dummy 13 weapon. The outer blade slides over the inner blade, allowing the weapon to “transform”. Printable without AMS. An arcane sword discovered long ago by Ludwig.…
Just scale the model to 0.3 Design by MatterHackers https://creativecommons.org/licenses/by-nd/3.0/ Category: Toys & Games
Game component boxes for Terraforming Mars. Designed for swift game setup. Take out the boxes and start populate player sheets and game board. Done. Features Different Holders for the cards so you can sort them by type. Shock resistant…
There are three mix-and-match styles to the supplied STL files: metric vs. imperial, narrow vs. wide, and long vs. short. The significance of these three styles are, metric : lead spacings in increments of 2 millimeters imperial : lead…
Supports are required because not all parts of the model will touch the bed (because of the ergonomic design) and the overhangs are drastic. I also recommend printing them with a brim to prevent the parts from peeling up.
1st Player Token for Terraforming Mars Board Game I liked https://www.thingiverse.com/thing:3788007 but we don't usually play with the drafting variant, so I removed the arrow; there was also then no need to print 2 and glue them together…
This is a linkage that transforms shape. Two of its states are a cube and an octahedron, passing through a cuboctahedron state. It also has other shapes that it can fall into, which makes it a bit of a puzzle to work out how to make it go…
I had problems fitting my sleeved cards into the insert designed by Exaggerator . My cards are using DragonShield sleeves and they were just a little to big to fit. So I made my own version with more space. Also the map raiser was not…
Exact same as Exact same as this model https://www.printables.com/model/585630-terraforming-mars-player-mat-overlay/collections but with stl file whereas original model link only has gcode
Terraforming Mars has over 700 pieces and no way to hold any of them other than dumping them all over the table. Cart Since the credits are copper, silver, and gold, I thought it would be cool to make them mine carts. This cart will fit…
This is a simple tool to help you bend leads on resistors or capacitors. I liked this one better than others because it had ridges for the lead along the sides. This was originally made by Robot Room guy on TinkerCad (see link)
Wanted to make something that I can print on my printer in one peace. I designe this in way so you can decide if you want just the bottom part or also the top part. Printed with PLA. No glue needed Bottom part - 223 x 163 x 4 mm Top part…
I designed this to make easier to storage and use player tokens. I recommend to print all bodies at once as it is much faster than printing one at the time. Printed from PLA.
Terrain tiles for Terraforming Mars Cities - several variations Forests - several variations Ocean
UPDATE 21/02/2025: Added looser and loosest fitting core pieces, that are easier to assemble the core of the robot, but the parts might fall out easier. This cute little robot is armed and is ready to defend its territory. Its flexible…
A table ready board game insert to allow for fast and easy setup of the game. Compatible with the base game and the folowing expansions: Discovery Foundations Crisis Expansion Player’s have pots for their individual components required to…
Hi all, this is my second 3Dprinted insert. The insert is made for Terraforming mars with Hellas and Turmoil expansions, and some improvemenets like Frist player token, acrilic markers for O2, Gen and Temp, metallic cubes and double…
I designed this to make easier to storage and use player tokens. I recommend to print all bodies at once as it is much faster than printing one at the time. Printed from PLA.
Wanted to make something that I can print on my printer in one peace. I designe this in way so you can decide if you want just the bottom part or also the top part. Printed with PLA. No glue needed Bottom part - 223 x 163 x 4 mm Top part…
Made this to have something where I can store all hexagonal tokens. 4 of these are enough to fit all tokens - I have decided to also glue mine together as showed on photo.
I recommend a different color for the center line and the dots that represent the number of points (numbers).
BUILD INSTRUCTIONS: The forms should be printed in PETG and the disk in PLA, this will ensure easy separation after forming. print PETG forms print PLA form remove disk from bed and place in folded paper place disk/paper on bed heat bed…
V2: updated to use single set of alignment pegs and reduce print time PRINT INSTRUCTIONS Material: PETG for forms, PLA for scales, dealers choice for plates print 4 of each forms forms attach to plates with dove tail connections I will…
Simple Vacuum Forming Tool that fits to a vacuum cleaner. Follow me on instagram if you are curious about how it works; https://www.instagram.com/odemir_atelier I've laser cut the frame and the plate from 3mm plywood for heat resistance.…
Remixed the hose connector to a screw on clamping style, sized for a Henry vacuum, but could be connected to a Parkside shop vac with a straight pipe connector.
Compact design that just fit the cubes in the box. Its easier than thought to remove cubes from the box when playing, since you add cubes for production from the start.
I built this insert around multiple stuf that I found on printables and thingiverse : - https://www.printables.com/model/580793-the-ultimate-terraforming-mars-the-dice-game-inser I used the dice holders from this one - I printed thos…
Just another card holder for your TFM game. Made for UNSLEEVED cards! We printed it in galaxy black which looks really awesome with the black cards inside. Have fun! Material: PLA Layerheight: 0.2mm Infill: 15%
I wanted to keep my Terraforming Mars: Automa separate, so I created this insert to keep everything in place in the original box. This design is only for personal use, no commercial use of any kind.
This insert is designed to hold Terraforming Mars and all of its current expansions in the base game box. The expansions supported are: Turmoil Colonies Prelude Hellas & Elysium Venus Next The insert speeds up setup and tear down of the…
Terrain tiles for Terraforming Mars Cities - several variations Forests - several variations Ocean
Dice box with dovetail lid and engraved TFM logo on both sides. Made for the original 5x 12 dice of Terraforming Mars - The Dice Game. There are TWO versions of the lid available: Lid with negative dice logo (for unicolor printers) Lid…
I needed a additional container for Terraforming mars ares expedition so i designed this :)
Just another card holders for your TFM - THE DICE GAME. These versions are made for SLEEVED cards! Version: Two compartment for green, red & blue cards of basic game and incl. first extension Version: Six compartment for companies and…
I designed an holder for my beard brush and my hair forming paste in the grindfinity system. Enjoy. Print settings on Bambu Lab X1 C Layer height 0.16mm 5% adaptive cubic infill smooth: on Filament: PLA Das Filament Grau
This is a remix of two models made by two different makers; combining what I feel are the best parts of both of their designs. If, because of under-extrusion, it is a little loose than desired, shim it, tape it, or add a bit of superglue…
Tiles for Terraforming Mars - The Dice Game The tiles have been resized to fit the 26mm hexagonal fields of the dice game. Also changed the height a little bit so that tiles have same base height. Looks awesome! Have fun! Material: PLA…
For commercial license subscribe to my Patreon or Printables Club ! https://Patreon.com/Plastic3D Introducing the Plastic3D Hanging Bat, a perfect 3D-printed Halloween decoration to add some spooky charm to your space! Designed for easy…
I was looking for a box insert for the game Terraforming Mars that is compatible with sleeved cards but could not find any. Therefore I decided to design my own. My insert is compatible with the base game and the two extensions Colonies…
Remix from Terraforming Mars Big Box Trays and Small Card Box to make a place for Awards and Milestones tiles.
I wanted to design a tray that allowed for both organization and viewing all pieces during setup. Two trays are needed to hold all 70 milestones and awards. Trays are designed to stack and fit in a medium-sized expansion box (Venus Next,…
I don't know why it shows the back of board for the stl., but there is a top surface, with indentations.
I made this box to store milestones and awards from Terraforming Mars extension. I designed this box for 6x2mm magnet, to be inserted during printing. This box has the same size than the storage box from TheCutter insert solution. I…
Component to hold milestones and award together on the board game. The first time it might be hard to plug the two part.
I love the original design of this insert by Pulp , but I wanted to fit in the 3D Local Neural Instance Tile by Spinodal_Zeugma so I made the space for original cardboard tile deep enough to fit in the 3D version even with the original…
The Ludwig's Holy Blade trick weapon from Bloodborne, scaled to be a Dummy 13 weapon. The outer blade slides over the inner blade, allowing the weapon to “transform”. A trick weapon typically used by Healing Church hunters. It is said…
Disappointed with the quality of the cube trays in the Terraforming Mars: Big Box, especially when loaded with the metal resource cubes, I designed these to replace the cheap vacuum-formed ones. The original clear lids fit, and can even…
All player boards I've found were the wrong dimensions for my edition, so I made my own with all the features I wanted
This is a very basic tray to organize and hold the extra city, greenery, and ocean tiles (cardboard or 3D) used for playing with the Amazonis Planitia fan-made map. It is designed to fit in the large opening in the added "Big Box" tray…
Extension to fit the two extra maps (Amazonis & Vastitas, Utopia & Cimmeria) inside the big box.
English description (deutsch darunter) These parts are used to tidy up the colonies and uprising box, and there is then a place for all the material. All boxes are printed as shown in the picture, black, gray and in player color. The…
*** Please, check the new improved version. This model is considered obsolete and will not receive any update. *** This is a remix of BallardBandit vacuum forming, shaped to fit pro-form dental material. The vacuum attachment are not…
Experience the ultimate fidget toy with this Fidget Transforming Keychain Robot ! This compact and portable design unfolds into a fully articulated mini robot, complete with shield and sword. Perfect for DIY enthusiasts and 3D printing…
Here is a collection of prints that provide you with a pretty much complete storage and play solution for Terraforming Mars. The more complex / specialized prints were designed by me in Fusion 360, while the other, more generic ones…
Print-in-place model of a Flexi Dog Version 01 X 2025 It transform from a solid, standing model to a flexi model (except ears and a tail wich are always moving) To lock the legs set them streight down and push up. You will hear a click…
This is an adapter for bottle cap to be connected to the GBO 9mm die reformer to let the shells in a plastic bottle. Questo e' un adattatore da collegare al die trafilatore della GBO per 9mm da avvitare ad una bottiglia di plastica. Print…
This is an adapter for GBO Dies Re-forming Re-calibrator 9mm to be connected to the die to let the shells come out in a basket. In the second drawing I added a compensation ring to lean on the press, but if you want I put the separate…
UPDATE 21/02/2025: Added looser and loosest fitting core pieces, that are easier to assemble the core of the robot, but the parts might fall out easier. This cute little robot is armed and is ready to defend its territory. Its flexible…
Terraforming Mars Accesories +PlayerBoard -all pieces designed for minimal filament usage -step with components for remix etch CONTAINS: -Card Holder- print 3 pcs -Tile holder - keep tiles organized, poke joke immediate see during packing…
This is a print in place robot that folds up into a cube for convenient storage. Print with these settings: 0.25 mm layer height. 75mm/s No supports. Once printed use an X-Acto knife to separate the legs and cannon arms from the body.…
(26-02-2002) Added PLA pin file, they fit a tad better, especially with tape and some scale fiddling, but tend to pop off under use. Do you remember Bakugan? Or those droids from star wars? Inspired by my favorite spinny transformers,…
Mainly to simplify and boost your playing experience to make it better and more enjoyable.
My so and I really love the game but I was not very happy with the included player boards as they don't hold the cubes. Therefore I designed this one as a chiquito present for her birthday. I did add some additional squares to make it…
Terraforming Mars Inlays have been done by the dozen - personally, I moved away from the classic components so much that none of them would be helpful. So I decided to create a premium inlay for the following content: Terraforming Mars…
3D tiles this storage box is for: https://www.thingiverse.com/thing:3153866 The original storage by gr33n_fr0g is great, but the sizing doesn't fill the full bed space of a Prusa MK3 / MK4. This remix changes the dimensions of the storage…
Vacuum forming table with hoop for home vacuum forming. Use a regular vacuum cleaner to use this. no need supports for print it use bolts for fix the plastic in the hoop glue it with CA glue If you like it, please support me: Paypal:…
This mold is designed for vacuum forming the hood/mask of the WLToys 12428 model or its clones. Perfect for RC enthusiasts who want to create their own lightweight and durable plastic hoods using vacuum forming.
A table ready board game insert to allow for fast and easy setup of the game. Compatible with the base game and the folowing expansions: Discovery Foundations Crisis Expansion Player’s have pots for their individual components required to…
This is the set of tiles I use to play Terraforming Mars. With this set it’s possible to easily create random maps to increase the re-playability of the game. No painting needed. This set is configuration is based on Customizing Mars…
I have only the base game, perludes1, an additional map, and extra awards/trophies so I made some parts to fit my box organization. I heavily pulled models from: https://www.printables.com/model/123664-terraforming-mars-premium-inlay…
The game comes with a total of 200 money cubes: 45 gold 30 silver 125 copper Sizes: Gold 10x10 mm Silver 8x8 mm Copper 7x7 mm I recommend printing with a small outer brim to prevent adhesion issues.
Terraforming Mars Storage Solution without magnets. Sliding lids instead. I made it from scratch in onshape, you can find the cad-file here:…
This is the redesigned and revised version of the adapter for the GBO 9mm drawing die to release the cases into an external basket. The bodies are now divided, to be able to intervene quickly in case of blockage, and the whole is locked…
Player's board and cards storage for Terraforming Mars. Counter may contain blobs that have to be cut off to player cubes fit perfectly. Material: PLA Layer height: 0.1
Hi all, this is my second 3Dprinted insert. The insert is made for Terraforming mars with Hellas and Turmoil expansions, and some improvemenets like Frist player token, acrilic markers for O2, Gen and Temp, metallic cubes and double…
Hello Everybody I created this model for a self-forming hole after watching the video from “Made with Layers”. The model is fully parametric, so you can easily customize it to fit different screw sizes. To adjust dimensions, just go to…
This is a totem of an older fellow performing to a microphone while playing guitar. Printing the microphone with supports is a little tricky but can be done with organic supports. Made with a prompt to chatgpt to make an image and then…
Designed to be a two-color design, insert a “@pause” in your slicer at the layer where the letters appear to swap out filament. Or use a multi-material printer if available. The design meassures 192.5 x 160 mm so most printers should be…
It's no fun fishing the right Terraforming Mars tile out of a ziplock back, so this storage tray and organizer lets you focus on the game instead. The eight slots each fit 10 tiles, so 6 for the city/greenery tiles (I like to orient three…
Printer : i3 MK3 Rafts : no Supports : no Resolution : 0.20 Infill : 100% Filament : FLEX
I designed these inlays completely from scratch to fit all currently available expansions (as of Summer 2025) with sleeved cards into the original box. The box can fit two maps, but we store the neoprene mats separately anyway, so…
This Thing is an Ultimaker Robot which I scaled up to 200 mm tall by 220 mm wide. I printed him in halves so that the parts could be bucks for a vacuum forming machine. The photos show the robot halves together and then on the vacuum…
For the player mat: When doing multi-color printing, select color to match name of the parts in the model. For single-color printing, do not print the “white”, “gray” or “black” parts, which will open windows for the cards which can be…
designed to be used on a MAKYU Multiplier (pressure former)
Still a bit of a work in progress, but overlay that should snugly fit around the planet ovals for the TM Colonies expansion. Print one first to see if sizing fits, and adjust accordingly by a percent up or down as needed.
Designed based on those tables that can also fold up into a shelf, this table does the same. It can be scaled up, but is a nice desk decoration for those small prints you want to display, or in table mode, to have a small picnic while at…
connects your up to 5.6mm inner thread drill to 3/8 Inch tools like wrenches and extensions
EN Description: The Folding Cube is a practical educational tool , especially useful in math lessons for both primary and lower secondary students. It provides a clear demonstration of how a cube can be assembled from different nets – and…
Eye Buck for Vacuum forming his main Eye. NOTE: This model is for his eye lens. It is NOT the eye (shown in green in the photo.). I used .5mm clear PETG in a two stage vacuum-former at 150degrees C. I used a good pair of scissors to cut…
Print-in-place model of a Flexi Hammerhead Shark It transforms from a solid model to a flexi model The force and tolerances are set like for a kids - but it will also depend on the filament used and print optons Model can be printed in…
