145 modeli
This is Nespresso Atelier clip for storing the frother. Easy and short print. I printed in PETG but PLA will be good as well Double side tape to attach it to the machine any where you want Enjoy
Needed a more universal frother stand, cut out in the base for paper towel or napkin if the cleaned frother drips. Printing on its back is the quickest w/o supports, but vertical gives more shear strength. Might make a second version…
Milk frother stand for the Bodum Schiuma milk forther. It was designed to allow easy and quick access to the milk frother while at the same time providing a sturdy and safe home for it while not in use. The print uses gradual overhangs so…
Small stand for electric milk frother - Kleiner Ständer für kleine elektrische Milch-Aufschäumer
Stand for the Zulay milk frother - mounts using double-sided tape or adhesive.
Latest files are available on my MakerWorld.com Profile | User = LTB3D ====== I have several milk frothers. All different makes, models, shapes and sizes. This makes use of the HSW base and has the option for a round and/or oval adapter.…
It is a waste of money (23 euro incl shipping) and material to buy a new drip tray, because it is only for the looks.
Astroukulele's frother mount is pretty great, but I didn't want to hang mine from the edge of a nearby shelf, and I found that the frother wouldn't hang straight – it always leaned in or out (you can see this in the photos for that…
I lost one of the small stirring pieces from my Milk Frother so thought I'd better create some spares before I lose the last one. If you've lost yours, this should get you back to making delicious coffee in no time! This was created to…
A bunch of people tend to replace the milk frother of the Dedica. Installing a completely new one is quite a drag, so the “lazy” method is to simply remove the outer part. This leaves people with the problem that the inner frother, which…
The Bodum brand milk frother we have is a unique oval-ish shape, which didn't fit nicely in other stands. So here's a stand for those! 16.5cm tall and about 9cm around at the base. Includes a modifer (done in Bambu Studio) for the base to…
Bought a handheld milk frother to use in my Cold Brew coffee. Brand is Froth Blast and was purchased on Amazon. Secured on wall or in cabinet with one screw.
The original model was for a frother with a round body. I have added another model for a frother with an oval shaped body
Print with no top or bottom layers. Experiment with different infill types and percentages and share what works best for you.
This is a simple support so that you will have somewhere to leave your milk frother while youre not using it. Must be fitted using a single wood screw of about 8mm. It will hold the following milk frother model: Este es un simple soporte…
Needed to make a holder for 2 frothers, where each was a different size and shape. So I decided to make one that would fit them both. Fits max 34mm in diameter frother and max 3mm shaft diameter. I printed it with ASA, but any filament…
I designed this stand for the Bonsenkitchen milk frother as a gift for a friend. The stand might also fit similar devices. For reference, the Bonsenkitchen milk frother's housing has an oval profile measuring 35 x 27.5 mm, tapering over…
We got a free aerator in the mail. Pretty decent and lets you pulse the thing with a springy button switch on the top. Anyways, it didn't come with a stand and laying it down on it's side was a big NO-GO. Spent an hour in Fusion 360 to…
Cleaning the milk frother adapter is not so easy, so I wanted to have replacements. Use a material which can resist the heat of the water vapor! Especially for the inner part! My first prints were using PLA which is not suitable! Print…
Just a simple stand I made. It needs no gluing. The upper hole is 30mm width and the lower hole has a width of 17mm. The space between the head and the food of the stand is 170mm. Print Settings Printer Brand: Sovol Printer: SV04 Rafts:…
a simple wall mounted bracket for a milk frother. please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs. https://cults3d.com/en/users/3DeezNutZ/3d-models…
Coupling for milk frother. Motor shaft is 2.0mm, whisk shaft is 1.6mm, but knurled end that goes in coupling is 1.8mm. Print Settings Resolution: 0.15mm Infill: 99% Notes: You might have to compensate for small hole size on your printer.…
The Milk Frother I got from Amazon (CAVN) had no way to put it anywhere. So I designed a fitting stand. Inc. small optional dripping bowl. Print the Milk Frother Stand lying on it's backside down - needs no supports. I printed mine in…
Milk frothers lying in the kitchen drawer always run the risk of getting damaged. This stand prevents the whirl from being bend. If it is of some use to you, please consider to give it a like. Thank you.
No need to use supports but you might need to use a brim if incase your bed adhesion gives you problems for PLA or PETG The side hole is sized according to the size of the micro USB that came with the frother.
Some-thing to guide the water from the wand to the bin during the "Rinse" cycle instead of all over the counter. No matter how many times the wand was aligned to the hole in the catch basin it would always move just enough to be out of…
Elegant and designed for 3D printing.
Prints without supports using the STL orientation. I softened the sharp edges a bit with the butane torch when getting rid of PETG-strings. Update V2: Added a STEP file that has fillet on all edges and a much smoother curve (the original…
A custom-designed holder for the Subminimal Milk Frother, ensuring secure and stylish storage. This holder is compact, easy to 3D print, and perfect for organizing your coffee making tools.
A simple little bowl I made to put the puck from Viking revolution. The puck presses into the bottom of the bowl and stays put so you can froth it up with your favorite shaving brush. Just rinse the bowl out when you're done leaving the…
I got tired of my thermometer, flopping around in my cup and redesigned the clip to be wider, longer, and it is a little more rigid than the original. I have included the step file in case you want to modify it for your cup if it is a bit…
Yes, this is a real, (moderately) functional milk frother. Can also be used for mixing small batches of paint. If you create an alternate attachment, it could also be used as a small rotary tool. A few caveats before we get into this:…
My Lid for Nespresso milk frother was broken so I designed 3D printing settings Printer brand: Prusa Printer: MK4 Resolution: 0.2 Infill: 25% Filament brand: Any Filament color: Any Filament material: PLA Supports: Organic on build plate…
I was tired of the flimsy Keurig Milk frother lid, so I made a study replacement. This lid never comes into contact with the milk,, but you may want to seal it with food-safe resin, as I have. Step file included for your modding joy.
My milk frother broke apart and the little switch got lost. Luckily there's a 3D printer to save the day :) Printed with PLA, 0.2mm layer, 6 perimeters. 4 minutes print
This is a wall mount for a milk frother which fits perfectly for the one which I have bought at Rossmann (Germany), the brand is “Ideenwelt”. It's cheap but works fine. The drawer already was full and I didn't like it to just lying…
A lid for the Nespresso CitiZ Espresso Machine milk frother. As the inside of the lid is hollow and has a overhang/lip, this model will need to be printed with supports touching the bed. This version does not have a gasket/washer but is a…
The original stirring piece broke on my Milk Frother so I needed a replacement. Printed with PETG to withstand the heat, and 100% infill to make the handle as strong as possible. Still chances of breaking, I might revisit the model so it…
New : V2 – vylepšená varianta V2 Improved design with integrated drip tray handle Toto je vylepšená verze (V2) původního držáku mlékovače pro Delonghi Magnifica Evo . Základní myšlenka zůstává stejná – čisté a bezpečné uložení mlékovače…
self-explanatory Freecadfile attached to adapt to your needs. ------ selbsterklärend Freecadfile angehängt, zum Anpassen an eigene Bedürfnisse.
This is a charging stand for my rechargeable cappuccino milk frother. The charging stand has 3 main features Stand for the main frother body Supports two 'frother heads' Has a cavity for a bottom facing charging cable. I recommend…
This modular stand is designed specifically for storing handheld electric milk frothers vertically. The design consists of three parts: Main Stand Body – Lightweight, open voronoi structure. Printed upright and requires minimal support.…
Stand I made in tinkercad for a frother. Glue holder into base. 4-25-23 update, added drip plate
perfect and expensive milk frother, but with very brittle handle. Of course you cant buy it as spare part. Is it any problem for makers? No, just print it. Should be compatible with all stainless Severin frothers. If you dont clean it in…
A bit late for the bath time contest, but this toy is for making making bubbles easier and more fun. Just give it a swish and you'll see results. Printed with 1mm nozzle, because I could. You can print anyway you please. Works well enough…
Drip tray for my SIMPLETaste Milk Frother . It's made to fit around and over the top of the wire stand for the frother. It may work for other brands, but I don't have any experience either way with that. The bent wire stand may not have…
I got tired of my the bent-metal-rod tipping over every time it is touched. I designed this one to fit under my Hamilton Beach Coffee maker, although I suspect it will work for others as well. By extending under the coffee maker it can't…
The only support needed is for the center cup. This is my first time uploading a design. Any and all suggestions appreciated.
I bought a new rechargeable milk frother but as usual it came without stand. I decided to make a wall bracket to hang the an hang up frother in the attachment but found out that it didn't fit in our kitchen. So I made a 2nd version that I…
I created a base for the Nespresso milk frother because I wasn't happy with the current base how easy it is to tip over if knocked. simple yet useful design and my first upload!
The original cracked so i designed and printed my own
For the frothy milk frother, i was hoping it would fit in another milk frother design, but its more squared off than most.
A drying rack for the individual pieces of the Nespresso Aeroccino 3 Milk Frother. There are stands that fit in the bottom of the part that will elevate it for greater airflow and drying capabilities. The idea is to place the stand on a…
Universal Milk Foam Frother Wall Mount Or Stand. This is a remix to enhance compatibility and usability. Simply add double sided tape and mount anywhere. Print normal with bottom on the plate. No support required.
Due to multiple plug in / plug out, the rubber end of the milk frother device became loose and no longer stays firmly in place, so when the steam function is turned on, the milk frother device is thrown out. I designed this fixing system,…
I made an holder for the milk frother attachment, normally it would go in the back of the machine behind the water reservoir. i needed a little more accessibility and came up with this design. I stuck it to the machine with double sided…
Simple Milk Frother Upgrade I upgraded a cheap milk frother to micro usb rechargable one. You can modify the button to make it swipeable as the original, but I didn't like it, pressable was more convinient. If you have all the component…
When my original plastic piece melted on the heater coil of the dish washer, i printed this one so I can still use my milk frother. I actually like this one better then the original part, because the hold is larger and there for more…
Just a basic frother/handmixer stand. It came in an ugly box. Made a small compartment in the front for the charging cable. Not a huge fan of this model but it's my first version. Will probably redesign it eventually
This funnel is used to stop the Breville Bambino Plus auto-purge feature from spraying milk over the drip tray. It is printed upside-down and with 15% infill and no supports. For fun, it is also shaped like a mini coffee mug!
Holder for simple mechanic milk frother. Help to dry the milk brother Print instructions print with 0,2 mm; 15% infill; no support
The tabs on the main body can be pinched off, made for keeping the body to the buildplate. The hinge uses a pice of filament. The logo on the lid can be painted in the slicer. 3 Walls 4 bottom / 4 top layers 15% infill 0,2mm layer height…
I've lost another milk frother to corrosion on the electronics. I'm making sure it's stored correctly to avoid more issues. I liked the clip idea of https://www.thingiverse.com/thing:2003808 I liked the fitted holder of…
I created a stand for a Areolatte milk frother that attaches nicely to the Nespresso Vertuo Next coffee maker base, it keeps the frother handy but out of the way
Needed a holder for the milk frother that fits exactly. If you download the STL, you need to add the negative element to get the openening to slide in the frother from the side, since i was unable to export it as an STL with the opening
Milk Frother Holder This is a specially designed holder for a milk frother, providing a stable and organized storage solution. Dimensions: • Inner Diameter: 16.4 mm (for holding the frother securely) • Height: 30 mm • Width: 20 mm •…
This is a replacement part I made in blender for the handle of the bialetti milk frother "Tuttocrema". First model btw. Is it a 1 to 1 copy of the original? - No Is it a piece of ingenious design - Meh Does it fit and work - Yes 10%…
My wife bought this frother from amazon and it doesn't stand up on its own. Use a zip tie to hold the stand to the base. https://www.amazon.com/dp/B0BW94FY7W?ref=ppx_yo2ov_dt_b_product_details&th=1
A base and two screws holding the frother leg Support the author: The model is free to use and published under CC-BY license, however if you want to support the model author you can do it here: BuyMeACoffee link
Small part that holds the frothers metal rod to the handle. Not sure how many models of frothers this will work on.
This modification will help you produce more tasty milk foam than the original Upphetta without getting messy. This 3D model fits more snuggly and the filter can reach all the way down to the bottom of the glass. I recommend you use…
No Supports Needed A stand/holder for the Milk Frother / Egg Beater on Amazon. Used it as a teaching tool to learn more about 3D modeling so you're free to take and use the file and even sell it but lord help your soul because I am not…
The handle on my WMF Stelio milk frother broke, and after some time thinking about how to fix I came up with this design. The design assumes that the metal part has not damaged, and that you still have the metal screws and plate. Design:…
DIY milk frother. Parts; - ON/OFF switch - 18650 battery - 18650 battery case - DC motor - Magnet -Old milk frother parts I was a mistake beforehand this is magnet hole size is wrong but I fixed. This stl model now perfect fit.
The milk frother that I got for my wife didn't come with a stand. I have a 3D printer, so let's hammer this nail. ;-) In order to make the base heavy to avoid tipping, I printed the bottom part out of ProtoPasta Copper filled HTPLA…
Love your hot chocolate, mochas and chai lattes? Well you probably have either the Dualit Milk Frother or the Hotel Chocolat Velvetiser to make sure your beverage arrives in premium frothed condition! If you do like the drinks but dont…
Remix of Wedgewood's (https://www.printables.com/model/617995-stand-for-milk-aerator-that-little-battery-powered) original design which adds a broader base. When glued together - the pair work together well for more stability when holding…
I built a custom stand for the Silvercrest Lidl milk frother as it didn't come with one. The stand features a tabletop base and includes 6x3 magnet slots allowing it to be mounted on a fridge or any other magnetic surface.
Need an easy solution to stop your Nescafe Frother from spilling milk when you don't get the exact milk quantity correct? Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: None Filament:…
Replacement part for a Bellini milk frother Lay print on the side for faster printing Supports on High resolution print
Using this particular Milk Frother at the moment, but I bought this one recently (because it charges with USB-C rather than micro USB like my first one) and see if it also fits the same. I used the flat mounts with 3M tape to stick it on…
The magnets are generic from Amazon. I have not tried printing without supports. The supports are simple and easy to remove.
Stand for milk frothing pitcher so I don't have to hold it the whole time. Puts the pitcher bottom at 100mm from the metal shelf on the bottom. Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0.16…
Simple circular tray for a milk frother and power cord.
Simple Holder for the EW-071 milk frother and it's tips.
Wall mount for a milk frother / blender of make Rosenstein & Söhne. This model is an updated and improved version with a stronger back plate. The previous model was too thin and even 3M tape got loose.
Printing: lay on the backside no special settings required See also the FreeCAD project file on GitHub: milk-frother-wall-mount.FCStd
Cover to protect MF-BTRV-35 (Mornings Made Magical) Frother. https://amzn.to/4bUwGEn I ran this standing up on a Bambu P1s using PLA without support.
IKEA Milk Frother 3D Version. It has 2 adapters. So, it works with IKEA parts or most of similar models with round motor. Quite easy to solder and assemble. What you need: IKEA/Similar milk frother parts 1x 18650 battery. 21700 also…
The original lid accidentally melted on a stove top so I recreated it. Printed on Prusa Mini with some cheap, transparent PETG, 100% infill and ironing. It fits the original rubber (or silicon?) band, but didn't end up transparent at all.
Holder to Electric Milk Frother, Milk Emulsifier, Stainless Steel Milk Frother and Cold Foam for Coffees, Espresso, Milk from the brand Sedhoom. Can be fixed with 2 screws, help the tool keep straight, I use to keep in the drawer but they…
Replacement connector for the frother head on my Primula Model PR12343 frother/whisk from Canadian Tire.
Here’s a clean product description you can use: Replacement Milk Frother Button – 3D Printed Custom-designed replacement button compatible with the Mud/Wtr milk frother. This model features a 6 mm tactile button with a 3 mm inset , paired…
This is a replacement part for the attachment of the stainless steel wisk head for the Arendo Milk Frother 'Mini Milk Star'. The original attachment is of weak design and after 1-2 years of every-day use, it breaks. I replaced it already…
Holder for railing (d=16mm). Use brims and tree supports for best result.
Mounts your milk frother to the wall. Just glued it on with some silicone - works perfect. Category: Kitchen & Dining
This is a custom-designed holder for the Philips 3200 Series coffee machine. The holder is designed to take advantage of the structural features of the machine. It slots into the side vent holes using two pins for positioning and is…
A stand for an electric frother/whisk. Specifically it is this Vomelon one from Amazon https://amzn.to/3QNSXds Printed in PLA with 0.4mm nozzle and 10% infill.
The top of my Nespresso Milk Frother got a bit melted, so instead of coughing up $20 for a new one, I designed this cute topper with a little cappuccino on the top as a handle. As this does not actually come into contact with the inside…
Replacement handle for a milk frothing pitcher. I added a hole to fit the original pitcher cap for a nicer look, and a second hole for a screw to get a tighter fit. Needs supports printed in PETG
