P
PrintablesKnochen911
Fugenglätter/ silicone trowel
Perfekt für Silikon Fugen glatt zu ziehen. Perfect for pulling silicone joints smooth.
- Pobrania
- 2332
- Polubienia
- 322
- Ocena
- 4,96
Wyniki wyszukiwania: fuge
Liczymy pasujące modele…
P
PrintablesGeoffP
Eppendorf (Microcentrifuge) Tube Rack
This Eppendorf (microcentrifuge) tube holder took inspiration from Stefan Huber's model ( https://www.printables.com/model/310767 ). I tried printing Stefan's model numerous times but the spring part of the rack was consistently failing…
- Pobrania
- 469
- Polubienia
- 31
- Ocena
- 5
P
PrintablesJSeppl
Fugenglätter / Grout Smoother
Joint smoother with 3 different roundings 10 mm , 2x5 mm 1 mm. Size 20x20.
- Pobrania
- 427
- Polubienia
- 16
- Ocena
- 5
P
PrintablesXimple Printing
Stackable Falcon centrifuge tube holder 50ml+15ml
My space in our lab fridge is a mess – many times i had to move out all the tubes in order to get the only one that I was looking for. They were lying flat, stacking on top of each other. So I designed this tube holder. This helps me to…
- Pobrania
- 352
- Polubienia
- 29
- Ocena
- 4,67
P
PrintablesSerge Nader
Hand crank centrifuge
One of my very first prints, post-processing may be required for shaft parts to fit (light sanding). I updated the files so that sanding won't be necessary. This hand cranked centrifuge takes 5 mL tubes and can spin liquid down to avoid…
- Pobrania
- 328
- Polubienia
- 84
- Ocena
- 5
P
PrintablesShane Reetz
Vial Rack - 50ml Centrifuge
This is a rack designed for robotic experiments with vials. It has high level of fit tolerance so it's easier to teleoperate robots to put the vials in this rack.
- Pobrania
- 305
- Polubienia
- 2
- Ocena
- 0
P
Printablesreefab
DIY Centrifuge
Designed for PHYSIQUE SANS FRONTIÈRE , a division of the French Society of Physics . This 3D printed centrifuge uses a drone motor to spin 8 1.5ml Eppendorf tubes. It is also designed to be very cheap and accomodating of different parts…
- Pobrania
- 283
- Polubienia
- 172
- Ocena
- 4
P
PrintablesPeagler Science
Microcentrifuge Tube Rack
A rack for 1.5mL centrifuge tubes, capable of holding up to 75 tubes. There are two versions: one with handles and one without. I'm experimenting with a version that is in vase mode for decreased filament usage. Fits on most build plates.…
- Pobrania
- 281
- Polubienia
- 22
- Ocena
- 5
P
Printableseurad
Dremel laboratory centrifuge
This is a remix of Laboratory centrifuge less than 5$ by dustkris . I changed it's orientation so I can use it with Vertical Support for Dremel by RobJP_ . Printed with PETG and 100% infill - better safe than sorry! I made an additional…
- Pobrania
- 248
- Polubienia
- 161
- Ocena
- 0
P
PrintablesBeo666
Silikonfugenglätter 0 bis 10mm Fugenbreite
Die perfekte Silikonfuge im Handumdrehen. Mit meinem Silikonfugenabzieher sind normgerechte 45° Fugen von 6, 8 und 10mm möglich. Ich empfehle die Variante aus TPU zu drucken.
- Pobrania
- 244
- Polubienia
- 26
- Ocena
- 4
P
PrintablesMatt
Stackable Stand for 1.5 ml and 0.5 ml Eppendorf Type Microcentrifuge Tubes
This stand is designed to accommodate 44 1.5 ml and 30 0.5 ml Eppendorf-type microcentrifuge tubes. Multiple stands can also be stacked on top of each other, making them ideal for storing a large number of samples. The stand was designed…
- Pobrania
- 241
- Polubienia
- 63
- Ocena
- 0
P
Printablesbart
Centrifuge adapters from 50 mL to 15 mL Falcon tubes and various glass vials
We have a centrifuge at work with a fixed rotor that takes 50 mL Falcon tubes. We also have a microcentrifuge that takes the small Eppendorf tubes (1.5 mL or whatever they are). But nothing in between and sometimes people want to…
- Pobrania
- 240
- Polubienia
- 24
- Ocena
- 5
P
PrintablesVSP
Mini benchtop centrifuge for PCR strips and tubes
In our genetics lab, we have a couple of small and simple centrifuges only to spin down PCR strips and tubes to remove droplets of liquid from the wall and cap of the tubes. When one of these broke, I realized how expensive these…
- Pobrania
- 225
- Polubienia
- 140
- Ocena
- 0
P
PrintablesJolu art design
Vegetable dryer, centrifuge
Practical manual vegetable dryer, designed for children, as functional as the original size one, can be scaled to bigger size without compromising its functionality once printed
- Pobrania
- 219
- Polubienia
- 35
- Ocena
- 0
P
Printablesjs500
Fantastic Factories with Manufactions and Subterfuge Insert / Organizer
This is an insert / organizer for Fantastic Factories with the Manufactions and Subterfuge expansions. It holds everything in the main box and has separators for the blueprints and contractors from the base game and for each expansion.…
- Pobrania
- 218
- Polubienia
- 44
- Ocena
- 4,71
P
Printablesyahbluez
Silikonfuge - Set of 17 pieces
TL;DR Tool set 17 pieces with many sizes and shapes to handle silicone caulking. Collection tools, workshop Motivation Every time i needed them i didn't found them and was forced to buy new ones. Let's get started This model is so easy to…
- Pobrania
- 209
- Polubienia
- 21
- Ocena
- 5
P
PrintablesCurlyVole
Microcentrifuge Tubes Rack 4x - straight or tilted
This rack was designed to hold a small batch of microcentrifuge tubes while working with them. Suitable for both the 1.5 mL and 2 mL versions. Should fit any tube with an outer diameter of 11 mm. The rack comes in a straight or a tilted…
- Pobrania
- 182
- Polubienia
- 39
- Ocena
- 0
P
PrintablesRemiRafael
MicroCentrifuge Tube holder
These designs are tube holders for 1.5, 2 and 5 ml micro-centrifuge tubes. It is designed to hold individual tubes straight during weighting. I also use it to hold 5ml tubes on a magnetic stirrer. The design objectives where to make it…
- Pobrania
- 157
- Polubienia
- 17
- Ocena
- 5
P
Printablesleizer.design
Hand Crank Centrifuge
Geared Hand-Crank Centrifuge A fully 3D-printable, hand-powered centrifuge driven by a simple gear system. No motor. No electronics. Just turn the handle and let the gears do the work! And yes, it’s super fidgety and incredibly satisfying…
- Pobrania
- 155
- Polubienia
- 29
- Ocena
- 5
P
Printablesning
50 mL centrifuge tube stand, Bulbasaur, Low-Poly
Print with supports: there are steep overhangs in the eyes and on the backside of the bulb.
- Pobrania
- 155
- Polubienia
- 17
- Ocena
- 5
P
PrintablesAdam
mHct Crit Carrier for Centrifuge
This mHct microhematocrit carrier is designed to hold 75mm capillary tubes for use in a centrifuge accommodating standard 15mL tubes. It's an improvement on the design included with the USA E8 Combination Centrifuge (whose original…
- Pobrania
- 149
- Polubienia
- 18
- Ocena
- 0
P
PrintablesMasCreations
Laboratory Centrifuge
Laboratory hand-crank centrifuge. This tool can be used in emergencies or in the absence of electrical power.
- Pobrania
- 140
- Polubienia
- 61
- Ocena
- 0
P
PrintablesMarkus
Dyson crevice nozzle / Fugendüse
Thie is a replacment for the Dyson crevice nozzle that comes with nearly every Dyson vaccum cleaner. The nozzle is 200mm long. Print standing with supports on buildplate only. For every one who want to remix this or want to create any…
- Pobrania
- 139
- Polubienia
- 18
- Ocena
- 5
P
PrintablesDrBenC
Quick Print 50 mL Centrifuge Tube Holder
A colleague of mine needed a lot of centrifuge tube holders quickly for the lab, so I designed this. Printing in ‘vase mode’ with 0.2 layer height and 50 mm/s speed, these came out in about 45 minutes using just 8g filament, so you can…
- Pobrania
- 138
- Polubienia
- 28
- Ocena
- 0
P
PrintablesRemiRafael
Holder for 50ml centrifuge tubes
This design is a series of holders for 50ml centrifuge tubes. The holders can hold 1,2,3,4 or 6 tubes. It can print without supports but you should make sure to have a very good bed adhesion. The shape is designed to allow to see the base…
- Pobrania
- 138
- Polubienia
- 21
- Ocena
- 5
P
PrintablesxTheScientist-X
Fugenglätter, Silicone Trowel
A simple model for smoothing silicone joints . Average print time: 17 min. No supports
- Pobrania
- 128
- Polubienia
- 6
- Ocena
- 0
P
PrintablesWilliBilli
Schattenfugen-Bilderrahmen / shadow gap picture frame
english: New: you can now change the dimensions of the canvas in the openscad-file und create the right stl-file New Version: Bilderrahmen-parameterized.scad While looking for a picture frame for my wife's 20x20 canvas pictures, I found…
- Pobrania
- 120
- Polubienia
- 10
- Ocena
- 0
P
PrintablesJesus Lerma
36x 50ml centrifuge tube holder rack
Tired of struggling with scattered tubes and cluttered workspaces? Say hello to efficiency and convenience with our premium 36-Centrifuge Tube Rack! Designed to streamline your laboratory workflow, this rack offers ample space to securely…
- Pobrania
- 120
- Polubienia
- 14
- Ocena
- 0
P
Printablesjoegoodsell
Centrifuge / Coffee Storage / Single Dosing Tube Funnel
Designed this funnel for used 50ml centrifuge tubes that have become ubiquitous in the specialty coffee community. Tolerances are not tight so you should not need to worry about resizing. (External diameter of tip of funnel is about…
- Pobrania
- 108
- Polubienia
- 9
- Ocena
- 0
P
Printablesgringer
HandFuge - Hand-powered centrifuge
A 3D-printed version of the Paperfuge, based on ideas presented the following paper: http://www.nature.com/articles/s41551-016-0009 The thin adapter pieces fit around a 1.7ml microfuge tube, which then sits in the grooves in the model.…
- Pobrania
- 106
- Polubienia
- 21
- Ocena
- 0
P
PrintablesLayerCraft
Fugenzieher
Fugenzieher kompakt ------------------------------------------------------- Compact silicone grooving tool
- Pobrania
- 100
- Polubienia
- 7
- Ocena
- 0
P
PrintablesJan-Maarten
dremel centrifuge addon
Inspired by thing:1483 I made an add-on to turn your dremeltool into a centrifuge. It has moving parts, but does not need support during printing or assembly afterwards. The trick to do this is use ball-and-socket joints, with a 0.2 mm…
- Pobrania
- 98
- Polubienia
- 15
- Ocena
- 0
P
PrintablesŠimon Smětal
Lego technic 1,5 ml tube centrifuge head
Build a centrifuge out of lego technic or Mindstorms and attach this head on a shaft. Please cover the whole thing with some box for protection. Print instructions Try to print with denser filling. This part needs to be solid.
- Pobrania
- 95
- Polubienia
- 20
- Ocena
- 5
P
PrintablesSnowZA
4x6 cap-retaining tube rack for stickered microcentrifuge eppendorf tubes.
The lab where my wife works got a new automated pipetting machine, and the tube rack that is available for that machine is apparently a nightmare to use. I made this version for her based of the design used in another machine. The rack is…
- Pobrania
- 94
- Polubienia
- 13
- Ocena
- 0
P
PrintablesThorrak
Stackable 15ml Centrifuge Tube Holder
This is a 15ml centrifuge tube holder I designed for holding nutrient blends for making mead. It also works for anything that will fit in a centrifuge tube. It is designed to be stackable, with a small imprint on the bottom of the rack to…
- Pobrania
- 86
- Polubienia
- 9
- Ocena
- 0
P
PrintablesKarnimaniac
50 ml centrifuge tube holder for 7 tubes
A holder for up to seven 50 ml centrifuge tubes. I use the seven centrifuge tubes to prepare my water soluble supplements for the week. Maybe its useful for someone. Doesn't need supports to be printed. Edit: The holder fits 50 ml…
- Pobrania
- 85
- Polubienia
- 24
- Ocena
- 0
P
PrintablesIñigo Demerath
Variety test tube holder / rack (Microfuge, falcon, conical, and test tubes)
Holds a variety of tubes 50mL Conical / Falcon tube 15mL Conical / Falcon tube Test tubes 1.5mL Microfuge tube 0.6mL Microfuge tube No supports needed, print with the points of the teardrops facing up. Tolerances tuned for Fuzzy Skin,…
- Pobrania
- 84
- Polubienia
- 6
- Ocena
- 0
P
Printablesder_test
Tile Joint - Fugenkreuz - 5mm
5mm tile joint. Customize This thing was made with Tinkercad. Edit it online Category: 3D Printing
- Pobrania
- 84
- Polubienia
- 4
- Ocena
- 0
P
Printablesgringer
Hand-crank Centrifuge
Geared / hand-powered centrifuge, with triangle bit adapter and rotor. This is for spinning down liquid in a tube for MinION sequencing, so should only require a few tens or hundreds of Gs. For a hand-powered design with a faster spin,…
- Pobrania
- 83
- Polubienia
- 24
- Ocena
- 0
P
Printablesning
50 mL centrifuge tube stand, Pikachu, Low-Poly
Print without supports.
- Pobrania
- 82
- Polubienia
- 14
- Ocena
- 0
P
PrintablesBaum
crevice tool / Fugendüse Miele
englisch This is a model for a replacement crevice tool for the Miele Complete C2 vacuum cleaner. After losing my original nozzle, I designed this model as a replacement to the official Miele crevice tool . The new nozzle allows for…
- Pobrania
- 80
- Polubienia
- 2
- Ocena
- 0
P
PrintablesAndrew3D
Eppendorf microcentrifuge tube cap lock
Ideally print in PC but works with PETG. Use at own risk.
- Pobrania
- 79
- Polubienia
- 5
- Ocena
- 5
P
PrintablesKyrian
Bouchon pour tubes à centrifuger coniques de 15ml
Bonjour, Voici un bouchon de remplacement pour les tubes à centrifuger coniques de 15ml ( http://www.cloup.fr/type.php?code=Tp2041&scat_id=147 ) Les bouchons d'origine ne sont pas très solides. Le fond du bouchon est conique afin…
- Pobrania
- 79
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMatthew B
0.2 mL PCR Tube Rotor for Mini-Microcentrifuge
0.2 mL PCR Tube Rotor This is an alternate rotor designed for a benchtop mini-microcentrifuge. It can hold standard 0.2 mL PCR tubes and works well with individual tubes or 8-tube strips. For a mini-microcdentrifuge like the the one…
- Pobrania
- 76
- Polubienia
- 16
- Ocena
- 0
P
PrintablesPeagler Science
1.5mL Microcentrifuge Tube Rack Vase
Based on my earlier design, the Microcentrifuge Tube Rack , this version is printed in vase mode, reducing by over half the filament (110g to 50g) and time (11.5hr to 4.5hr) required.
- Pobrania
- 76
- Polubienia
- 8
- Ocena
- 0
P
PrintablesWilliBilli
Schattenfugen-Bilderrahmen - druckbar in einem Stück / Shadow gap picture frame - printable in one piece
english: Shadow gap picture frame for canvas pictures. The size is only limited by the print bed. Smaller picture frames can be printed in one piece, which makes printing much easier and eliminates the need for assembly. New sizes can be…
- Pobrania
- 74
- Polubienia
- 7
- Ocena
- 0
P
PrintablesRemiRafael
Holder for 15ml centrifuge tubes
This design is a series of holders for 15ml centrifuge tubes. The holders can hold 1,2,3,4 or 6 tubes. There are two versions named "compact" and "stable". They differ by the size of the legs: "compact" has smaller legs while "stable" has…
- Pobrania
- 74
- Polubienia
- 13
- Ocena
- 0
P
PrintablesJpxfrd
Microcentrifuge/PCR Tube Rack for 0.2, 0.5, 1.5, and 2ml Tubes
There is a version with and without handles. Holds 48 0.2ml tubes, 40 0.5ml tubes, and 36 1.5/2ml tubes. The bottom of each well tapers to a point to help tubes sit upright. The 0.2ml tubes are arranged in rows of 8 spaced 9mm apart to…
- Pobrania
- 70
- Polubienia
- 7
- Ocena
- 0
P
Printables0800peter
Fugendüse für Staubsauger VaccuumCleanerLongNozzle
needed for the cleaning of enclosed Printer and the Room in corners and hidden places. this thing fits in between, needs no space to store and is always handy. 16 mm diameter 15 cm long small nozzle that fits on 34-35mm inner diameter Vac…
- Pobrania
- 69
- Polubienia
- 4
- Ocena
- 0
P
Printablesreefab
F.Lab's DIYbio Centrifuge Repaired and New Electronics
The STL files are just repaired so that they can be used with Slic3r. I'm using a Digispark instead of an Arduino for controlling the speed, you can find source and instructions at https://github.com/reefab/diybio_centrifuge Category:…
- Pobrania
- 67
- Polubienia
- 28
- Ocena
- 0
P
PrintablesJustAJoJoke
Falcon and Microfuge Tube Holder
A rectangular test tube/eppendorf tube holder with multiple sized holes for various tubes
- Pobrania
- 65
- Polubienia
- 10
- Ocena
- 0
P
Printablessparrow
Slowmo Centrifuge
Stepper motor driven centrifuge for spinning down cell culture samples. Variable RPM control without programming from 0-1000 RPM.
- Pobrania
- 62
- Polubienia
- 29
- Ocena
- 0
P
PrintablesR0285
Centrifuge Tube Filtration Insert (50ml) / Falcon Tube Filter Insert
50ml Falcon tube insert to use in centrifugation applications. Printed with a resin printer (Printed vertically with an 20 degree tilt). I added another version which prints well with fdm printers as well (printed laying flat) Made to…
- Pobrania
- 61
- Polubienia
- 11
- Ocena
- 0
P
PrintablesJesus Lerma
50ml centrifuge tube holder rack
Revolutionize your calibration process with our Centrifuge Rack designed specifically for pH and ORP standards. This compact yet robust rack offers a convenient and organized solution for preparing and storing calibration solutions in…
- Pobrania
- 61
- Polubienia
- 6
- Ocena
- 5
P
PrintablesGerald
Bosch unlimited 7 Fugendüse und Zubehörhalter
An meinem Bosch unlimited 7 vermisste ich weitere Zubehörhalter und eine Fugendüse. Mein Zubehörhalter hat eine Aufnahme für den Schlauch, für das Verlängerungsrohr und für eine breite Staubdüse. Die Aufnahme für den Schlauch ist mit…
- Pobrania
- 60
- Polubienia
- 9
- Ocena
- 5
P
PrintablesNick
Tube holder microcentrifuge tubes
Tube holder for three microcentrifuge tubes
- Pobrania
- 60
- Polubienia
- 12
- Ocena
- 0
P
PrintablesDave Ciepluch
Single Dose Coffee Dispenser for 50ml Skirted Centrifuge Tubes
<Expanded description coming soon>
- Pobrania
- 59
- Polubienia
- 8
- Ocena
- 0
P
PrintablesJames Gilliland
50ml Centrifuge Tube Stand
Stand for holding individual 50ml centrifuge tubes for experiments or storage.
- Pobrania
- 58
- Polubienia
- 9
- Ocena
- 5
P
Printablesgencitch
Adapter Plate - 75x75x30mm Fugetek radial fan to 3M Filter Bayonet
I wanted an adapter that would fit a 3M VOC filter and mount to a Fugetek 75mm x 75mm x 30mm radial fan (model number HT-07530D12M). I couldn't find anything that did what I wanted, so I made one. I printed this out in PETG with 2…
- Pobrania
- 57
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJanus Kottisch
Lange Fugendüse fürs Osvac System
Optimal wenn man mal sein Auto aussaugen möchte. Durch die lange Fugendüse kommt man auch in die Hintersten Ecken. Und Parktisch wenn man das Osvac System hat.
- Pobrania
- 56
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSOAC 3D Printing
96 Well 1.5ml Microcentrifuge Tube Rack
This microcentrifuge tube rack offers a secure and organized solution for holding your samples during benchtop experiments or storage. Simply import the file into PrusaSlicer, use a standard PLA or PETG profile, and ensure your print…
- Pobrania
- 55
- Polubienia
- 4
- Ocena
- 0
P
PrintablesStefan
Fugendüse
Das Original hatte mir zu wenig Wandstärke und ist nach dem ersten Einsatz zerbrochen. Zudem benötige ich sie etwas kürzer. Ich habe sie in weiß gedruckt und sauge damit Spinnweben und Staub an Wände und Decken weg. Mit dem weißen…
- Pobrania
- 54
- Polubienia
- 4
- Ocena
- 0
P
PrintablesAntonio
Hand-powered blood sample centrifuge
This centrifuge was designed by Dr Giorgio Romagna, with whom I share my Printables account and my passion for 3D printing. The idea for the centrifuge came from a toy I used to play with as a child. It was made from just a thread and a…
- Pobrania
- 54
- Polubienia
- 42
- Ocena
- 3
P
PrintablesAGGRC
Tube Rack for 1.5 mL Centrifuge Tubes
The centrifuge tube racks are specifically designed to accommodate both 1.5 mL microcentrifuge tubes, providing stability during solution handling and mixing. These models are integral to operations at AGGRC, particularly when working…
- Pobrania
- 53
- Polubienia
- 13
- Ocena
- 5
P
PrintablesJpxfrd
Microcentrifuge Tube Rack 40-60-80 Wells for 1.5ml or 2ml tubes
3 sizes: 40 well, 60 well, and 80 well. Bottom of each well tapers to a point to help tubes sit upright. All sizes are available with and without handles. Print with 15% infill and supports if printing handles. Dimensions (mm): 80 well:…
- Pobrania
- 53
- Polubienia
- 7
- Ocena
- 5
P
Printablesdemjansein
Fugenlehre Holzterrasse 4,5,6,7mm joint gauge wooden terrace
Fugenlehre Holzterrasse 4,5,6,7mm
- Pobrania
- 53
- Polubienia
- 7
- Ocena
- 0
P
PrintablesChemistry at University of Alberta
Centrifuge tube adapter (50 to 15 mL)
This model was designed to be used in a “LD-5 Electronic Centrifuge” fixed angle rotor. The user's manual indicates a maximum relative centrifugal force of 2395*g. Print instructions: UltiMaker Polycarbonate, no need for supports, infill…
- Pobrania
- 52
- Polubienia
- 4
- Ocena
- 0
P
PrintablesCannaCreator
Portable Mini Centrifuge with Adapter
Portable Centrifuge This was mainly developed for manual hand powered, where the idea is to have a string attached to the inner part, and pull to rotate. The spinner is made for 6 pieces microcentrifuge tubes, 1.5 ml/2 ml. With the…
- Pobrania
- 51
- Polubienia
- 23
- Ocena
- 0
P
PrintablesAdam I
Adjustable Centrifuge Tube Holder
This is a holder for centrifuge tubes. Placing the lid on top of the holder allows you to hold smaller tubes. No supports are needed, just print the lid with offset portion face up.
- Pobrania
- 48
- Polubienia
- 13
- Ocena
- 0
P
PrintablesFrapperoni
Tube Adapters for Centrifuge
A simple adapter for laboratory centrifuges. Easy to print, any material is perfect (unless it has to be autoclaved). Printed in PLA for room temperature centrifuges. Printed with 0.2 mm layer height No supports If the plate is well…
- Pobrania
- 47
- Polubienia
- 3
- Ocena
- 0
P
Printablesnjmck
225mL Conical Centrifuge Tube Rack (2x, 4x, and 6x models)
A rack to hold multiple 225mL conical centrifuge tubes, such as those made by Corning (Product number 352075). No more struggling to carry them around in beakers to keep them upright. Holes are 62mm in diameter to suit tubes with an outer…
- Pobrania
- 46
- Polubienia
- 8
- Ocena
- 0
P
PrintablesC3D
Mountain Refuge: Moonlit Haven - Filament Painting
2.68 A beautiful filament painting in Impasto style. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA EryOne Matte BLACK FOREST GREEN…
- Pobrania
- 45
- Polubienia
- 22
- Ocena
- 5
P
PrintablesMartyS
50ml Centrifuge tube dark cover
Keep your 50ml centrifuge tubes clueless, I mean in the dark. Print in black PETG. With less flexible filaments it may be difficult to slide the cap on and off. Fairly wide tolerances, should accommodate most standard 50ml tubes.
- Pobrania
- 44
- Polubienia
- 22
- Ocena
- 5
P
PrintablesJeyMco
Grout float (jointing / voegen / Fugen) for small areas (and hands)
Two grout floats in 2 different sizes: small (7 x 15.6cm) with handle smaller (7 x 10cm) with crim grip Don't forget to (hot glue 130C) add a foam float (I got mine from the hardware store), I recommend at least 5mm larger foam as the…
- Pobrania
- 43
- Polubienia
- 6
- Ocena
- 5
P
PrintablesHarePrints
Short crevice tool for Samsung Jet 60, 70, 75, 90, Bespoke Jet i Jet 95 (Fugendüse, suceur plat, boquilla para ranuras)
I found the original crevice tool to be too long, so I decided to design a shorter version. I successfully designed a locking tab that prevents the attachment from slipping off.
- Pobrania
- 42
- Polubienia
- 5
- Ocena
- 0
P
PrintablesPietsProjects
Stackable centrifuge tube rack
A stackable centrifuge tube rack which holds 50 tubes with a diameter of 7 mm (0.5 mL tubes). The rack is printed in two parts. The top part needs to be glued in the base to construct the rack.
- Pobrania
- 42
- Polubienia
- 4
- Ocena
- 0
P
Printableschrisebryan
pH Probe Rack with 50ml and 15ml Centrifuge Tubes for Buffers and Washing
Ever feel like you're losing track of probes, buffers, and washing tubes during pH calibration? This all-in-one pH Probe Calibration Station can be your new best friend. It keeps everything organized and handy in one compact unit. The top…
- Pobrania
- 42
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSchorle
Fugenkreuz Terrassenplatten
Fugenbreite = 2mm Tellerdicke = 2mm Tellerdurchmesser = Ø70mm
- Pobrania
- 42
- Polubienia
- 5
- Ocena
- 0
P
Printablesning
Adapter to centrifuge 1.5 mL tubes in 15 mL tube slots
An adapter to centrifuge 1.5 mL tubes in 15 mL tube slots. This is useful, because most centrifuges that fit 1.5 mL tubes are not swinging bucket centrifuges.
- Pobrania
- 41
- Polubienia
- 3
- Ocena
- 0
P
Printablessparrow
Speedo Centrifuge V2
This is a variable speed centrifuge with speed control and readout. No programming or soldering required. If you don't have a 3D printer , you can Purchase Printed Parts from Portals :…
- Pobrania
- 41
- Polubienia
- 12
- Ocena
- 0
P
PrintablesMrSmile
Centrifuga da laboratorio a manovella attrezzi non necessari - Hand cranked lab centrifuge no tools needed
Centrifuga a manovella per laboratorio, nessun attrezzo necessario per assemblaggio. Non necessita di corrente elettrica. Configurazione per 2 o 4 provette. Posizione provetta angolo di 45°. Dimensioni provette fino a 30 mm di diametro ed…
- Pobrania
- 41
- Polubienia
- 17
- Ocena
- 0
P
PrintablesAndreas
Fugenklinge
Zum modelieren einer Fuge aus z.B. Silikon. Es sind 3 Modelle mit dem Radius 6,8 und 10mm im Download. Print Settings Prusa Mk3s Rafts no Supports no Resolution 0,2mm draft Infill 10% Perimeter 19 Filament brand Giant Arm Filament color…
- Pobrania
- 40
- Polubienia
- 8
- Ocena
- 0
P
PrintablesProtspace
50 & 15 ml Centrifuge Tube Stand
Single Centrifuge Tube Stand Compact and stackable centrifuge tube stands. The wide, stable base helps prevent tipping, while the open-sided cradle makes it easy to insert, remove, and view tube contents—ideal for quick handling during…
- Pobrania
- 40
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMatthew B
Centrifuge Bucket Insert for 15 mL Glass Tubes
IMPORTANT: I have only tested this centrifuging at 100 x g. I DO NOT recommend centrifuging 3D printed components at high speeds. This insert is designed allow centrifuging of Corex No. 8441 glass round-bottom 15 mL tubes in an Eppendorf…
- Pobrania
- 38
- Polubienia
- 2
- Ocena
- 0
P
Printablescmos
Chamber-Door-Handle for Sorvall Evolution RC Centrifuge (SPARE)
The referenced original device seems to be not supported any more and spare parts seem not to be available any more. "Thermo Scientific Sorvall Evolution RC Superspeed Centrifuge"…
- Pobrania
- 38
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMscottie
Fantastic Factories + Manufactions & Subterfuge expansions insert
This is an insert for the board game Fantastic Factories plus its Manufactions & Subterfuge expansions. It supports premium-sleeved cards. The boxes with lids print best at 0.16 layer height (0.4 nozzle) but 0.20 or thicker is fine for…
- Pobrania
- 36
- Polubienia
- 7
- Ocena
- 0
P
PrintablesDrFeelgood
Fugenkreuz joint cross 3mm
Simple Fugenkreuze in 3mm hoch und 3mm dick.
- Pobrania
- 36
- Polubienia
- 4
- Ocena
- 0
P
PrintablesJpxfrd
Microcentrifuge PCR Tube Adapter
The adapter is the same width as 1.5ml and 2ml eppendorf tubes and is designed to hold 0.2ml pcr tubes for use in a microcentrifuge. The hole has a diameter of 7mm. The diameter is about 10mm throughout the bottom and about 13mm at the…
- Pobrania
- 36
- Polubienia
- 2
- Ocena
- 0
P
PrintablesNadav Halwany
Centrifuge Tubes Holder
Printed with DO3D Silk Multicolored Rainbow PLA. Holds 8 x 50ml tubes and 4 x 14ml tubes. Has space for text that can be added using PrusaSlicer (First flip the top part, so the text you add will point upwards). The parts should be glued…
- Pobrania
- 36
- Polubienia
- 14
- Ocena
- 0
P
PrintablesCorn_b
Stackable centrifuge tube holder great for organization 15 & 50 ml
Stackable centrifuge holder great for organization it can hold 6 15ml centrifuge tubes and 2 50ml centrifuge tubes.
- Pobrania
- 36
- Polubienia
- 13
- Ocena
- 0
P
PrintablesPFu
Centrifuge Tubes Holder
A holder for six centrifuge tubes. I use it for coffee bean dosing. Uses four M3 screws that should tap into the plastic.
- Pobrania
- 36
- Polubienia
- 7
- Ocena
- 0
P
Printablessparrow
Speedo Centrifuge
A mostly printed centrifuge with variable speed control, speed readout, safety features, and improved rigidity. If you don't have a 3D printer , you can Purchase Printed Parts from Portals :…
- Pobrania
- 34
- Polubienia
- 31
- Ocena
- 0
P
Printableshinand
Centrifuge tube stand
This centrifuge tube stand was designed in collaboration with a colleague from the microbiology lab at university of zurich It has 8 places for different sized centrifuge tubes. The first front row was created for the centrifuge Eppendorf…
- Pobrania
- 34
- Polubienia
- 12
- Ocena
- 5
P
Printablestom
Fugenkratzer/ Joint scraper
Dies ist ein einfacher Fugenkratzer, den wir auf unserem Balkon benutzen. Der Griff ist angeschraubt, so dass man den Kratzer bei Abnutzung austauschen kann. Zusätzlich werden benötigt: 2 x Zylinderkopfschraube M4 x 18 mm 2 x…
- Pobrania
- 33
- Polubienia
- 6
- Ocena
- 0
P
PrintablesP_Creamer
Eppendorf 5810 R Centrifuge 5 ml Tube Bucket Adapter
A centrifuge adapter for the Eppendorf 5810 20 5 ml tubes and fit into the A-4-62 rotor. Would recommend using 20% infill with 3-4 layers to ensure it can withstand centrifugation. Currently tested up to 2000 RPM with no issues using…
- Pobrania
- 33
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMohd Aftab
Portable Centrifuge
A centrifuge is a laboratory instrument used for separation of the materials through filtration and sedimentation. Especially where there is a requirement for chemical or material analyses. The basic operation principle of the centrifuge…
- Pobrania
- 33
- Polubienia
- 14
- Ocena
- 0
P
PrintablesZen does Prints
Single Rack for Micro centrifuge tube
This is used for weighing the contents of one mini centrifuge tube
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
Printablesdgarcu
Conical Centrifuge Tube Cover
The issue In the lab, photosensitive compounds are often used for a variety of reasons. The common approach is to protect these compounds with opaque containers, but these containers are usually made from transparent materials. As a…
- Pobrania
- 32
- Polubienia
- 5
- Ocena
- 0