Náhradní pant pro digestoř, cooker hood hinge
Náhradní pant pro digestoř Mora OP 610W. Cooker fume hing for Mora OP 610W.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
- Pobrania
- 33
- Polubienia
- 7
- Ocena
- 5
57 modeli
Náhradní pant pro digestoř Mora OP 610W. Cooker fume hing for Mora OP 610W.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Model náhradní krytky digestoře Mora 5708. Pasuje celkem dobře. Tisknuto s transparentnim PETG, průhlednost vztisku dostatečná. Pro zlepšení průhlednosti stačí ztenčit tloušťku sklíčka. Současný model má 1mm, určitě bude fungovat i s…
Wydruk około 0,84 €–1,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Da ich sehr lange auf der suche nach einer Zigarettendose war in die ich auch Gestopfte Zigaretten bekomme, allerdings keine fand setzte ich mich selber ran und Baute diese. Meine Ideen dafür habe ich aus Verschiedenen Foren und von…
Elegoo Orangestorm Giga Enclosure. I printed everything out of PETG material. I used 3/16 dowel pins 1.750 length for connecting the door frames together. I ream the holes out. There is holes in the top frame for dowel pins also but I…
This a quick Bed Level test print for the HUGE Elegoo OrangeStorm Giga. I designed it in Shapr3D and it should take about 12 minutes to fully print. I ran the manual leveling, then the auto mesh leveling and this print allows me to see…
This is a 3D model of the Elegoo OrangeStorm Giga in 1:1 scale that you can use to see how this printer might fit inside your house, garage or office. Inside the .zip file are the Augmented Reality files for you Android or iOS devices. I…
Conversion of the Elegoo OrangeStorm Giga to Bowden with fixed filament sensor Umbau des Elegoo OrangeStorm Giga auf Bowden mit festen Filamentsensor
Orange Storm Giga Spool Holder Mounts built for 1" PVC pipe. These are intended to be mounted on the top sides. This is the first version and it works pretty well for me. Some updates may come. The Taller version is untested. I have not…
Redukce na digestoř ze 150 mm na 120 mm . Reducer For Cooker Hood Vent Ducting 150 mm To 120 mm Pokud se ti model líbil dej mu like, díkes. If you liked the model, give it a like, thanks.
For building an enclosure for the Elegoo OrangeStorm Giga, this is to have a front with doors that can magnetically shut. Front panel is made from laser-cut 3mm clear acrylic, used m4 screws and nylock nuts to secure to the printer frame.…
Tray to store the bed adjustment sheets so they stay flat. Thanks to Uncle Jessy for the inspiration.
layer height of 0.2 mm
For building an enclosure for the Elegoo OrangeStorm Giga, these parts raise the top of the printer so that a top panel does not impact the gantry and the maximum print volume is unaffected. All parts fit within the build volume of the…
You will need to get longer M3 screws to mount the sensor on the mount. Also two holes for Ruthex M4 threaded inserts.
Magnetic mount for depth gauge manual level the bed. The hole diameter is .250 for the depth gauge. Link for magnet is below. Note: Make sure you have your printer in a spot its going to stay. These big printers like to flex and don't put…
Da die Puffer meiner Toilette leider etwas den Geist aufgegeben haben und ich mir TPU zum testen gekauft habe, war das mein erster Druck nach den Testdrucken. TPU Puffer für den Sitz, siehe analog Amazon.…
The USB port on the Giga is rather unprotected and for me it is reaching into a walkway. This should protect it. Secure with super glue.
Simple cable management parts for the OrangStorm Giga LCD Cable. The corner clip is used to secure the LCD wire along the corner frame to keep it form hanging free. I used 3 clips, but you can use more if you want it more secure up the…
The touch screen cable of the Giga is rather unprotected and for me it is reaching into a walkway. Feed cable into notch and glue cap to bottom piece and glue to printer. Super glue works great.
This is the filament runout sensor mount for use with my spool mount. I used an M3x16, two washers and an M3 nut to attach the sensor to the mount. An M4x16 should work as well.
Here is my remix of the model from @TL_158870 It uses a PC4-M10 fitting to use a 4mm pnmeumatic tube.
Remixed for a a ½ inch (21.5mm) steel pipe you can get at home depot. Remixed in Tinkercad so its not perfect. Steel pole has a nut on the end to stop it rotating. Snaps in place but can also have a t-nut. Had it hold 10kg spool no…
larger version with more robust threads and a greater storage volume, the hook is made to screw into the top so it would print in a stronger orientation. the top has holes for an m3 heat insert.
Da die Puffer meiner Toilette leider etwas den Geist aufgegeben haben und ich mir TPU zum testen gekauft habe, war das mein erster Druck nach den Testdrucken. TPU Puffer für den Deckel. siehe analog Amazon.…
Fichier de test du plateau 800*800
The emergency stop button on the Giga is rather unprotected and can be easily pressed. This cover avoids that. I attached it with double sided tape and used just a bit so it can be removed, whenever necessary.
USB Por Protector. You take the 4 screws that hold the USB port plate on and put this mount in its place. M3 screws.
This file is repair of Power on/off button for kitchen hood. It must be printed with support, better is print on side. Print Settings Supports: Yes Resolution: 0,1 mm Infill: 20% Filament: Prusament PLA, PETG white / transparent…
Dies ist ein praktischer und gleichzeitig witziger Zeigestock in Handform , ideal für Lehrer*innen, Präsentationen, Schulungen oder einfach als spaßiges Accessoire auf dem Schreibtisch. Die Spitze ist als stilisierte Hand mit Zeigefinger…
trubka pro napojení hliníkové trubky k digestoři
Bridgestone logo for office \ workshopBridgestone logo for office \ workshop
The model was created in FreeCAD 1.0 and should be edited in the same(i.e. Assembly workbench used was not present in earlier version). Important Files: data.FCStd: contains spreadsheet that is used to set parameters for all parts of the…
preventivně odpojit od el.proudu, demontovat krytku, vyměnit poškozený díl
Need to keep a door open but don't want a lame wedge? The HingeStop is the tool for you!! Simply print and hook onto any door hinge. You also have the choice to display a spooky message to anyone who may use the door. There are two models…
Držák na sklo digestoře MORA OP 630 W
Mamce na digestoři chyběla krytka žárovky. Jelikož byl rozměr díry 6x18cm, tak byla tvorba nového velmi jednoduchá i v Tinkercadu - jen váleček a kvádřík! Po chvilce přemýšlení nad co nejjednodušším designem, je to vymyšleno tak, že se…
Tištěno z PLA a zatím drží Pokud se vám výtisk líbí, budu rád za váš like. If you like the print, I would appreciate your like.
Redukce pro digestoř nebo vzduchotechniku 120/150
DN110 nebo DN125 mezikus pro odvod kondezatu. Odvodni vystup pro DN16 (15,6mm)
This is a upgraded version for the remix. I'm going to test it with creality filament feeder AF-01.
Light and power swich for fume cupboard MORA 6800 and 6801
External cover for the kitchen hood exhaust. It is compatible with pipes with a diameter of 100mm, the attachment is carried out using four screws with a maximum diameter of 5mm with a mutual distance of 130mm. I recommend drilling holes,…
The ultimate flex for every 3D printing enthusiast! This sign proudly declares that your printer is bigger than theirs... even if you're currently printing it on a standard 220mm bed. It’s designed to be a tongue-in-cheek addition to your…
Kaminer HEPA filtr pro krbové vysavače 10/15/18/20 l
Redukce vývodu z digestoře 120/130mm
Nástavec s HEPA filtrem ETA HF10 pro digestoř.
Magnetická krytka s ručkou pro snadné zakrytí horních větracích otvorů u kuchyňské digestoře. Vzduch potom odchází ven pouze zadním vývodem. Během tisku použity vložené neodymové magnety ze starého harddisku. Tisknuto z bílého Prusament…
As usual, something went wrong on a Friday evening: the range hood control cover fell apart. The whole thing was designed directly in the slicer—no CAD software was used. I had to create the entire system from scratch, but it works. CZ:…
Used to integrate the AF-01 to Orangestorm giga. Use one single ptfe tube for best results.
0,3 PLA Přechod digestoř 97 na 135
Diese Füße (Auflagestopfen) sind für den Kettler Fahrrad-Montageständer "Profi" Art.-Nr. 8981-850 Ich habe die Auflagestopfen (Füße) in Tinkercad entworfen. Material: Unbeding PET-G verwenden TPU nur für den Schutzüberzug der den Boden…
Bridgestone logo for office \ workshopBridgestone logo for office \ workshop
Diese Füße (Auflagestopfen) sind für den Kettler Fahrrad-Montageständer "Profi" Art.-Nr. 8981-850 Ich habe die Auflagestopfen (Füße) in Tinkercad entworfen. Material: Unbeding PET-G verwenden TPU nur für den Schutzüberzug der den Boden…
The ultimate flex for every 3D printing enthusiast! This sign proudly declares that your printer is bigger than theirs... even if you're currently printing it on a standard 220mm bed. It’s designed to be a tongue-in-cheek addition to your…