Wyniki wyszukiwania: gholder

Ringholder hand

Make sure there is support under the fingers, I recommend the tree support, increase the thickness if necessary.

Hand ringholder

Hand shaped ringholder, can also hold bracelets and watches. Printed with 0.8mm nozzle @0.4mm layer height. 25% lighting infill works out good.

Cute Narwhal Toy and Ringholder

The Unicorn of the sea now comes you a printer near you! This cute little narwhal comes in three different styles: Alone - They are just out here catching some sun living their best life On a rock - Relaxing on a rock trying to do their…

Elephant (Ringholder)

My wife saw the files of the contest and asked me to find something for just a few rings that looks cute. So I searched and found BQEducations Elephant as a perfect Holder of our wedding-rings. No supports are needed. 10% infill is enough…

Molle MultiFix - "anythingholder" Paracord or bungee cord

Molle MultiFix : for the well-known molle system, this offers a lot of individual application options. You can use it with paracord, bungee cord (rubber band) or any rope you have on hand. Simply thread the paracord and you can attach…

Bagholder Garden Gnome

Meet the Bagholder Gnome – the tragic hero of meme investing, frozen forever in that exact moment of diamond-handed denial. Clutching his precious "bags" while the market freefalls around him, this poor soul still believes it'll bounce…

Desk Cupholder / Mugholder Screw-Mounted

Since I faced too many problems with my mug, I'd design a mug holder to screw under my desk. Works for Cups and Bottles up to 85mm diameter. Since I changed my desk, I also made a remixed vertically mounted version , which is just a…

Stylish Cat Ringholder

Introducing my latest 3D printable cat ringholder, a playful fusion of functionality and design. With dimensions measuring 93mm x 40mm x 200mm, this delightful feline doubles as a stylish ring holder. Crafted for both practicality and…

Trashbagholder Campervan

Halter lassen sich an Platten bis 12mm Stärke aufstecken. werde später noch Halter für den Campingtisch des VW California und die Wandschiene im VW Bus erstellen

Adaptor for my Trashbagholder to fit it on inside rail for the table of VW California Campervan

Adaptor for my Trashbagholder https://www.printables.com/de/model/841043-trashbagholder-campervan

EarringHolder Luna Sailor Moon

Cute earrings holder with the silhouette of Luna , the cat of Sailor Moon. ----- Please leave a rating or comment if you like the print! Want to sell my prints? Commercial License is available here: https://patreon.com/asniaire You can…

Legholder with Pin-Tool for Ikea Antilop Babychair

Clips for transport of the IKEA Antilop Legs. The pin in the middle of the clip is for pushing in the pins of the legs, so you never have to hurt your thumbs again. I printed it with nobufil petg, which is very strong. If you use other…

Ringholder hand with trays

It's a remix

The finger ringholder

Magholder magnetic IPSC doublestack Mag

Print in TPU

Kobra Z axis support Mod - KobraThrustBearingHolder

Inspired by NunoFlyer 's Anycubic Kobra 3 Ring for Thrust Bearing , this improves the design by adding a tighter fit, adding spots to press fit the bearing into, adding a top assembly to attach the shaft coupler to. Why this mod? Kobra 3…

Hand ringholder

-

Rubishbagholder-Wallmount/Müllbeutelhalter-Wandhalter/Müllbeutelrollenhalterung

Just a vertical rubishbagholder to glue it to the wall with doublesided tape.

Yeti Fishing mugholder

Designed for Yeti Rambler 10, works well for all your other beverage needs. slots for fishing pliers and hanging wet lures.

Tableadaptor für Trashbagholder

Adaptor for my Trashbagholder https://www.printables.com/de/model/841043-trashbagholder-campervan

Dishsoaptray with spongeragholder and drain

Because the tray is a perfect fit for this specific sink, i added all the files and also a version without a spongeragholder so anyone can modify the tray to their needs.

Eggholder w. Spoon

a simple eggholder with space for a spoon. easy print :)

Low Poly Gridfinity Ringholder

I wanted a small simple ringholder, so I used a gridfinity crate as base and added the dome to hold the ring. I then converted the model so a low poly state that I liked. Happy printing.

Everyday Carry Caddy - Samsung Galaxy Watch Ultra; Ridge Wallet; pocket knife; & ringholder

This is a bedside Every Day Carry (EDC) caddy. I built this for: a built in watch charger holder for the Samsung Galaxy Watch Ultra a ridge type wallet with money clip (and a lot of cards A pocket knife slot (I have bench made with pocket…

Berg Buddy GoKart Flaggenhalter /Flagholder /Mount

Flaggenhalter für das Berg Buddy Kettcar Die normalen Flaggenhalterungen vom Fahrrad kippten leider immer, daher habe ich auf die schnelle eine alternative erstellt. Benötigt werden 4x M3 Schrauben 4x M3 Muttern Flaggenstab Durchmesser: 8mm

Mushroom Ringholder

Mushroom Ringholder, to keep your rings safe:)

Vertical Cupholder / Mugholder | Screw-Mounted

This is the vertical mounted remix of my desk mounted mugholder . It's a little bit more refined. The handle cutout is just a little bit lower and the diameter is just a little increased. This does also fit special mugs a lot betther,…

Yeti Fishing mugholder single

Designed for Yeti Rambler 10, works well for all your other beverage needs. slots for fishing pliers and hanging lures. Mirror in Cura for a right hand version

Eddingholder

The eddingholder fits three Edding 3000 and has two 3-mm holes to mount.

Emmaljunga Bagholder

More than 5,5Kg in empty stroller! English and german summary below! Give a Like, Post a Make and Tip me baby one more time! Deutsch: Wer einen Emmaljunga NXT90 Kinderwagen hat, weiß, dass der Kinderwagen schon einen großen Stauraum hat.…

Spongeholder & Ragholder

I used simple PLA and printed with supports.

Plugholder Type-C Europlug (Flat back, slightly angled)

This model holds a Type-C plug (Europlug) snugly and is angled, such that the plug can easily be removed. The back is flat, which can be used to glue the holder to a surface. For other mounting options and questions, please leave a comment.

Ringholder ring

Here are two versions of a ring holder that has an open ring for holding the ring (and a small bowl for rings in the middle (can be seen in the photo of m make). One can use the two- or four-arms version (I only printed the two arms…

Handlebar Bagholder

A mounting system for handlebar bags. The mount has the following features: Integrated bike computer mount for Wahoo bike computers A mounting plate with a spring suspension. This does not work very well, but cushions the hard shocks.…

Ringholder

Ringholder

OctopusRingHolder

As a gift, I designed and printed an octopus ring holder.

Huevera-EggHolder

Sencilla y bonita huevera o portahuevos. Use soporte orgánico para la base y 10% de relleno

Eggholder / Eggstand

a simple and classic eggholder

ownMade - EggHolder with egg

I made a nice EggHolder for 12 eggs EggHolder 150 x 200 x 133mm

Airtagholder for FXLRS Harley Davidson (2020-...)

Der Halter kann unter der Maske von einer Harley Davidson Low rider s ab 2020 montiert werden. Auf den Bildern sieht man ganz genau, dass man die Halterung unter die bereits vorhandenen Schrauben, verschrauben kann. Am Schluss des Deckels…

Eggholder / Eiablage / Bamboosnake / Bambusnatter

Eiablage für Bambusnattern / Nattereier Eggholder for Bamboosnakes 16cm x 11cm x 1,2cm Ca. 8 Eier Rückseite 4 Löcher für M5 x 25mm Schrauben

Rabbit eggholder

Just for fun eggholder. You may need to adjust the scale to fit the eggs you have.

Licking kitten ringholder

Support for rings and other jewelry with a nice kitty. Soporte para anillos y demás joyería con simpático gatito.

Flower Tagholder: six on 220x220 surface

Very simple pot or garden tagholder. 6 fits on 220x220 print surface (like my Kobra Go) PETG prints raccomended if used outside.

Držák vajec - Eggholder

Držák na 6 vejec s podtáckem

TrashBagHolder 6.5" dia-Left and Right

Remix from greecher... Trash Bag Holder 6.5" dia-Left and Right

Clamable Spongholder IKEA Bosjön water tap

This is a Clamable Spongholder for IKEA Bosjön water tap. It is deigned for IKEA Bosjön water taps with a diameter aboutt 32mm. (Mine has diameter of 31,7mm) There are two versions, one for smaller sponges and a big version for normal…

Ringholder

Magnetic holder for rings. Just glue in 2 Cylindrical Magnets (8x3mm) Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Prusa PLA Azure Blue Category: Rings

KISS RingHolder

simple, scale as needed. about 10cm high. fast and easy print, no support.

Ultralight 600 MagHolder - Includes Project Files!

Prints on its side requiring no supports with a .4mm nozzle. intended to use just about as little filament as possible. use a dot of glue and throw a 3mm thick magnet on the back. Use up to a 10mm*3mm round magnet. STEP and SHAPR files…

Bafang electrical bike battery plugholder replacement

Replacement part for electrical bike that uses a bafang battery. The part that holded the plug broke when sliding the battery in/out of the bike. The break occured at the red line on the picture of the original. To mount this replacement…

Flanged IKEA Samla Quick Change 608 Bearingholder

Added a small flange to make sure that the outer ring of the bearing doesn't touch the printed guides. Short version is 2mm shorter to account for the samlas embossment in the middle. Category: 3D Printer Accessories

Frogholder for anything

Save the bowls the firecracker has on your back. For example, money or a nozzle.

Double Alpha DAA Racer Magholder Lockwasher

Lockwasher.. thing for the DAA Racer magholder (I don't actually know what the name of this item is called). Mine broke almost immediately, and replacements seems hard to find. Suggest printing in something quite sturdy. I used PETG-CF.…

IKEA Samla Quick Change 608 Bearingholder

I liked x_y_z idea but I had 608 bearings available and lazy to buy 688 spacers are built for HicTop spools (62mm) while stands are reduced in height stands are not yet printed (I printed original and found they were to high) stands…

Eggholder / Eggstand

Simple and Classic Eggstand

Couch MugHolder Adapter | 85mm

This 3D-printed mug holder adapter is specifically designed to fit into couch cup holders with a diameter of approximately 85mm. It features a cutout to accommodate mug handles, providing a secure and stable fit for your favorite mugs,…

Plugholder for ID Buzz and Other Electric Cars

Wandhalterung für E Auto Ladestecker. Mit und ohne Grundplatte

Sweet teabagholder

A teabagholder with a covered sugar box and a stand for teaspoons.

Fridge Eggholder for / Kühlschrank Eierhalter für Hanseatic HFD18983CI / Ikea Ribbenås

Fridge Eggholder for Hanseatic HFD18983CI / Ikea Ribbenås Mirror file to get the other half Kühlschrank Eierhalter für Hanseatic HFD18983CI / Ikea Ribbenås Datei spiegeln um die andere Hälfte zu bekommen

teabagholder

you can put your teabags in

Blanco Botton Pro 17L waste adaptor for 15L bags with bagholder

This innovative adapter allows you to easily use 15-liter bags, which are standard in many Blanco waste systems. Designed for versatility and convenience, the adapter offers multiple benefits: Use Standard Bags : Many green waste sorting…

Eggholder

Holder

EggHolder

I designed this modular, space-saving holder in Fusion 360 to solve the problem. My main goal was to design a sturdy, stackable system that could be printed quickly and without supports. I went through a couple of iterations to get the…

Covers for Old Alarms (with built in keyrack & bagholders)

Every time I come home I would look at my old yellow plastic alarms in disgust. I decided enough is enough and printed some blank covers to hide them. I then thought, why not add some function to these - and made versions with a key rack,…

Bagholder / Taschenhalter

Holder for a cupboard handle. I used this to hang a bottle returnable bottle on the kitchen cupboard. Drill hole: D12mmx20mm Groove: 40mmx20mm Halter für einen Schrankgriff. Ich habe diesen verwendet um eine Pfandflaschentasche an den…

The Ring Ringholder UPDATED 5/29/23

The Ring Rignholder Silly, I know, but i just found it silly to make a ring holder in the shape of a ring. I am learning Fusion360 so I figured give it a go. The idea is silly, but I wanted to try to find where function and form meet.…

JackPlugHolder 6.35 Jack

The cables for the headphones are a bit heavy so I thought why not to hang them not at my head but at the mixer. So this is a 6.35 jack with a short hook to hang on the cable and also the headphones when not in use. Printing: I printed it…

Skysurfer Wingholder

For wings and carbon rod Root part attaches to rear of fuselage. Wings can be secured by putting a wire through the slot, carbon rod is secured by friction(hole gets gradually smaller) Mid part is attached with the front screw See also my…

Easy Eggholder

The eggholder is an easy, fast print. NO supports or fancy settings needed. UPDATE: Due to request, a 14x holder was added (2x 7 eggs). 8x eggholder: L 188mm x B 100mm x H 30mm 6x eggholder: L 141mm x B 100mm x H 30mm 14x eggholder: L…

IKEA HÅLLBAR Bagholder Ring

Replacement Bagholder Ring for the IKEA HÅLLBAR bin.

Relaxed Easter Bunny with Eggholder

Added a Eggholder to the lovely relaxed easter bunny. The base bunny is AI generated, my Eggholder extension is added manually.

Eggholder

I made this eggholder to hold 14 eggs instead of only 10. It's printed in two pieces, one left and one right, it' symmetrical. After printing I only glued them together.

Ringholder Gridfinity

Ringholder Gridfinity

UFO Ringholder

Hello, this is my model of UFO ring holder. This is MY MODEL, i work with Tinkercad but i didnt saw it in the community page. If there is any problem with it, contack me in the pms

Intelligent Mugholder for FESTOOL MFT 3

This mugholder will automatically close its lid, once you put your coffeemug on it to prevent letting any kind of chips and other scraps fall into your brewery. It works with a counterweight to lift the lid again when you grab the mug…

No More Mug Mishaps: IKEA ÅNESPELARE Mugholder Upgrade!

I've remade this design, transforming a simple donut into a perfect insert for the IKEA ÅNESPELARE mug holder. The ÅNESPELARE mug holder is super handy for tall mugs or those without handles. However, if your mug's handle is too low, it…

Improved Eggholder

For https://www.thingiverse.com/thing:3431363 : I enlarge the main hole so no sanding is required Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Hobby

Tatonka Saddlebagholder for XYZ-Bikes, TrudeTrailer and similar

You will need 2 M5x40 screws 2 self-locking nuts M5 optionally 4 M3 x 15 or M3 x 16 screws 4 M3 nuts The M3 screws are used to prevent delamination of the layers. You can omit them for lightweight bags. FreeCad files included to modify…

Wedding Picture, Ringholder and Caketopper

Wedding Picture, Ringholder and Caketopper split in half for easy printing. then glue together. Heat up the chainelement to insert into the heart.

Thetford Eggholder

This tray is ued to store six eggs safely in the fridge. I have printed this using PETG but I guess PLA should be ok as well. No support needed. You may need to flip the model upside on the printing bed.

Double Alpha DAA Racer Magholder Lockwasher

Lockwasher.. thing for the DAA Racer magholder (I don't actually know what the name of this item is called). Mine broke almost immediately, and replacements seems hard to find. Suggest printing in something quite sturdy. I used PETG-CF.…

Relaxed Easter Bunny with Eggholder

Added a Eggholder to the lovely relaxed easter bunny. The base bunny is AI generated, my Eggholder extension is added manually.

Eggholder w. Spoon

a simple eggholder with space for a spoon. easy print :)

Adaptor for my Trashbagholder to fit it on inside rail for the table of VW California Campervan

Adaptor for my Trashbagholder https://www.printables.com/de/model/841043-trashbagholder-campervan

JackPlugHolder

Holds 5 3.6mm Jack Plug Adapters