Liczymy pasujące modele…
This cat fishing rod toy features a functional ratcheting reel with a printed spring to prevent unwanted line release. It makes a satisfying clicking sound as line is reeled in. It was remixed from the original to eliminate the need for…
Dreiteiliger Ständer für Barcode Scanner. Zum Unterschied von meinem geschraubten zweiteiligen Modell ist dieses dreiteilig und wird zusammengesteckt und mit Klebstoff gesichert. Gedruckt mit PLA 15% Infill und 2 Perimeter. ……………………………..…
3/4 inch female (glued) to 3/4 inch pipe thread male. Look at the 3d model.
I did this remix to avoid the use of screws and nuts, except for the tension M3 screws. Small adjustments here and there: various rounding, sacrificial bridges on the top table, modified thread paths to facilitate tensioning. The shuttles…
Remix of my Openframe1 case with parts that can be glued together. I use ABS for my prints and I think acetone gluing is neat. There are chamfers and slots so that everything can fit together nicely. I then used some m3 heated inserts [1]…
The hexagon structure is only glued on. To make the print aesthetically more pleasing without screws, I removed the holes on the parts. Additionally hexagons were added on the pickguard to meet the goal of more hexagons. Hexagons are the…
Just a simple plastic leg to attach to furniture. Use some glue and a nail to attach it Print instructions 1) Print it, I used 75% of filling, they are very strong. With 100% filling they are probably indestructible
Remix of nikke845's under desk dimmer holder. I wanted to mount it on a glass desk, so I removed the screw holes and added a bit more surface to be able to glue it with double sided tape under a desk. Print Settings Printer Brand:…
Handy handle made of PLA. Attached in two ways Stick it on the double-sided tape fasten with a 3mm screw Printing parameters: filament: PLA infill: 20% time: 12m Wider spacing will allow you to attach more cables. Dimensions: Width: 25mm…
Ventilation grill glued to tiles Width: 180mm Height: 165mm
Cat Fishing Rod Toy – Right-Handed and Left-Handed Versions This cat fishing rod toy features a functional ratcheting reel with a printed spring to prevent unwanted line release. It makes a satisfying clicking sound as line is reeled in.…
Background I really liked TankerTech's bucket handle grip remix. It just needed a few updates for the buckets I had around. All the wire handles on my buckets were not straight enough to fit in the wire path between the two grip halves (…
For fastening use double sided adhesive foam tape, You can use cheap tape (full box is not heavy). Filament need cca 80g. Wall thickness 2mm. Easy mounting. For holder use 0,2mm layer height include first layer or 0,3 or 0,15mm layer…
Thanks to @Yanev for their nice working parametric model of a tool box! I remixed it to "huge" for holding a ViewSonic LCD Projector, and added a carrying handle, made for two (2) M5 x 30mm screws plus two (2) M5 nylock nuts. The latches…
Simple zip tie cable mount to use with double sided tape or power strips to fixate cables.
This is a replacement for early model Space Navigator knobs, as over time the rubberized grip starts to severely degrade, characterized by it falling apart and feeling sticky. There are a few revisions of the space mouse. To identify, pop…
I have been designing 3D clockwork toys, and I decided to break-out the motor holder portion for anybody who wishes to use an N20 gearmotor by itself, or add this to another model. If you need help with 3D models, please let me know. I am…
Print Settings Supports: Yes Resolution: 0.2 Infill: 100% Filament material: PETG
YouTube video: https://www.youtube.com/watch?v=gnQClMuNEI4 I'm putting this in the public domain, however if you print and sell these, It would help me a lot to get a few dollars donated to my patreon. https://www.patreon.com/RinoaSG I…
Set of backplates to mount the hex squared HSW remix to a wall by use of some glue. The backplates are designed for M3x3mm heatset inserts like the ones sold by cnc-kitchen. Multiple options included. Option 1 with long center strip.…
get "glued flange" and add camlock adapter for others
After bustin the edge on my bezel on my smart watch whilst out bouldering and suspecting a new bezel would take a while to get my hands on, I wanted to keep the watch going while I sorted that out and try and protect the screen from…
This is a wallhook I used this glue tape: https://www.amazon.de/gp/product/B098XGZ1H4/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1 Print Option: Bambu Lab PLA-CF 50% Infill If you have any questions, feel free to ask.
This is a drawer I designed for my desk ( https://s.click.aliexpress.com/e/_c3eibuQ3 or https://amzn.to/4uA1DWS ). It features a spring-loaded stopper that prevents the drawer from falling out when fully opened, while still allowing you…
a jar to keep your stuff
Added holes for an M3 bolt to fasten the WinderBase and ReleaseCover . Length can range from 4 mm to 12 mm. Used Sufix 832 ice braid as a fishing line because it worked better than paracord and wasn't expensive. Also added a shroud to use…
Case for DockingStation (glued to wall with double sided tape) for the Acer 12-in-1 Mini Dock (HP.DSCAB.009) Main job was to be glued to the wall but also to test a fusion feature i knewer used before. Support: no Filament: use any you…
Fairly simple: Buy cheap T5 Striplights, print my holders (2 per light), Glue them on the surface of your choice. Profit! ähmm Light!
I used mamut glue to mount. Use zip-ties to mount cable.
This is an original shoes organizerdesign created from scratch and optimized for 3D printing. Material: PLA Machine: Creality K1 MAX
5° angled diammeter for head 25mm for better performance should be inserted screws M4x30mm designed 2 dimmensional holes for glue by silicone to tile
I have a 2008 iMac that I kept having to carry to and from work, but the sharp edges would almost cut my hands. So i decided to make my own handle for it. I glued it on with E-6000. I mostly trust it so far. Might have to add more glue…
This applies to some screens from ago or aliexpress.
i made an cereal dry box hanger which has a big surface to be glued due to not being able to screw it into a lack table, it was created via tinkercad.
This is a small wafer or disc to help glue across joints to provide more structure to multi-piece projects. The original use case was for a multi-part helmet that had no notches or grooves for alignment or connecting the pieces together.…
This is an original shoes organizerdesign created from scratch and optimized for 3D printing. Material: PLA Machine: Creality K1 MAX
5° angled diammeter for head 25mm for better performance should be inserted screws M4x30mm designed 2 dimmensional holes for glue by silicone to tile
Modified holder for Pleated blinds with bigger glue surface for double sided adhesive Recommed printing in white PETG Needs to be mirrored for left and right instance
If you’re like me and have only a single high-temperature blue filament, you’re in luck! This remix allows you to print the fully-functional parking dial in a single color and then 2D print the black and white dial+arrow on a 2D printer,…
For fastening use double sided glued foam tape, You can use cheap tape (full box is not heavy). Filament need cca 80g. Wall thickness 2mm. Easy mounting. For holder use 0,2mm layer height include first layer or 0,3 or 0,15mm layer height.
I made the mistake of trying to put bondo and paint to hide the separation of the parts. Still, il was easier to put together without the locking system. Having more space for the string knots inside the ken is also a nice feature. (don't…
print, and glue it with double face on your helmet ! lamp will not fall Print Settings Rafts: Yes Supports: Yes Resolution: 0,2 Infill: 100 Filament: filatec TPU82A Notes: print it vertically, with support and brim Category: Sport &…
Wired Huge doesn't have an adapter niche what can be used to secure the stand, so the stand should be glued on. But with full-bodied stand glued on, you will loose the access to the ball. So here's the hollow one, 20 degrees slope. Also…
Print with at least 4 walls, at least 4 top and ground layers - I put them with strong doublesided tape to the wall
The base is made to be glued on the desk with hot glue, it has special pocked at the bottom to be filled with hot glue. The arm is not flexible, so its meant to actually hold the mouse wire. Fits well on Logitech G502 Hero.
I used this idea to make a variation for a rolling M2 threaded screw with a base that could be glued for my electronics housed in the oil pan of the LS3 motor (oil pan has a slant and if not held down hits the crankshaft required 12mm…
Here's yet another toilet paper holder for you! I know there are plenty designs already, but when I was looking for it there was no single model that I would like visually, so decided to create my own. This one has no special mounting,…
A printable adapter to allow your smartphone to mount to a tripod. Glue a 1/4-20 nut into the base (most common nut around) and then use 3M tape to attach it to the back of your phone.
Pretty simple. Fits the Tasogen thermometer/hygrometer you can get by the gross on Amazon.
Remix for someone who needed a holder without a hole.
A simple holder for labels. Use CA glue to apply it where you need it. Labels can easily be inserted from the left side. Tested with Brother DK-N55224 non-adhesive paper tape. Label width is 54mm. Length should be set to 44mm.
