80 modeli
Multiboard holder in hexagonal shape with a 33mm opening and 55m tall overall. Designed as a gluestick holder but works for so much more. Credit to Jonathon at @KeepMaking for the multiboard.
Wydruk około 2,27 €–2,78 € nettoWstępna wycena jednego wariantu
Remixed From Tinkers Design, I needed a wall mounted rack and, given how hot it gets in my garage, I added a center support to prevent sagging. The center piece also allowed me to cut the ends down saving both material and print time.
Wydruk około 2,49 €–3,04 € nettoWstępna wycena jednego wariantu
necessary parts to set it up. flat head bolt size M4 length: 14mm M4 T-nut
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
The holder matches the hole spacing of the Ikea Platsa series perfectly and allows you to store your glue stick safely.
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gluestick Box I created this box with the goal of organising my drawer that was a mess. With this organiser now I can find and take the gluestick very easily. I printed it in PETG but also PLA will work fine. I suggest to print it…
Wydruk około 2,63 €–3,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed an way to organise some glue and accessories
Wydruk około 3,13 €–3,82 € nettoWstępna wycena jednego wariantu
Here is a set of Shelves and Holders for your glue sticks or any similar size tools/items. Made specially for HSW or Honeycomb Storage wall with Hex wall fixings. Depending on Your printer it is possible that a very little sanding will be…
You need a “Snap” to attach this part to a multiboard wall. Visit https://www.multiboard.io/ for more information.
Useful if you have all the other tools in the drawer under the printer which doesn't store the glue because of space limitations. The V3 allows to add a little bit of hot glue to make it more stable, but i have used it for weeks without…
A 1x1x6 Gridfinity bin designed to hold your gluesticks or other items with a 30mm diameter. For reference, this will fit a 40g Elmer's Purple Gluestick. Hole diameter: 30.8mm Hole depth: 35mm I'd recommend using a magnet base for better…
2 different sized inserts for different vial sizes. I removed the square extrusions in the lid, it prints a tiny bit faster and is easier to fit foam into if you want to do that. See original model for the bottom half of the case, I…
Its a mount for the Bambu Lab gluestick for Skadis. Print it with supports.
A general note: Generally, I try to avoid using glue sticks and glue products on 3D prints.. but sometimes you really do want that extra assurance that comes with using an adhesive. In particular this is a welcome helper for many ABS/ASA,…
Supports: No Material: PLA Infill: 15%
1x3 Gridfinity module for holding an Bambulab glue stick. With finger holes for easier reachability
Ender 3 GlueStick Holder. Based on dimensions from Pritt GlueSticks (bigger and smaller) How to print: You do need support for the (holding) part.
A simple glue stick holder for Ender 3 S1/Pro
Small Dual Gluestick Holder for Multiboard - Push Fit Connection
If you want to make a large Dragon Statue, you can not print it out in one Piece with most printers. But you can print it out in Pieces, and glue these pieces together. So this is another Variant of…
Holds a flashforge gluestick (probably other similarly sized sticks too). Little finger cutouts included on the ends for easier grabbing.
This is a holder for 7mm glue sticks (i.e. for Hoto's hot glue gun) that is compatible with Ikea Skådis. I designed them to be printed lying on the side - the small arch connecting the front and back walls shouldn't need any supports.…
Maybe you need to turn the model 90 degrees in x-direction in your slicer. I used PLA, PETG will work also. 0.2mm layer height, 3 perimeter. Nozzle 0.4mm, 20% infill.
This is a mount for 1" pegboard with 1/4" holes designed to fit 10 small gluesticks at once. These are the little 7g gluesticks that are 20mm in diameter and 80mm tall. This does require supports for the lower part of the pegs. Category:…
Dispenser for 0,7 x 10 cm hot Gluesticks. I use a “Small Thread - Plain Head Bolt” for fixing
Designed and printed for my wife's classroom. Printed on Elegoo Neptune 4 pro with minimal supports. i used PLA with organic support everywhere. .2 Z spacing, .2 LH.
I spun up a quick model to colocate my favorite glues: Gorilla Glue Clear (my new favorite general purpose) Loctite gel superglue Loctite liquid superglue (Glue stick, accelerant, or what have you). The focus was the first two items, but…
Gluestick (25mm) holder with nice curved lip.
The default diameter of the hole is 29.5mm, but a STEP file has been included for ease of modification The VSlot Gridfinity baseplate shown in the photos can be found here:…
It is what the rest said. Got tired of misplacing the gluestick and scraper. Remixed a runout sensor to not lose them again. Mounted with m3x12 screws, with 2 m3x7x1mm washers. Yeah can use 10mm screws, but one didn't wanna screw in right…
Scale as needed, default scale is 5cm in diameter. I used it to glue to the top of a chickens waterbottle so we could hang it up Category: 3D Printing
You will need support for this print, and I recommend okay leg supports/tree support. If you printed, please consider posting to make!
A simple glue stick holder for your lack enclosure. Made so the holes are on the inside and don't use up excess space. Able to use the same larger screws you used to make your enclosure.
A Skadis mount to hold CA Glue/Gluestick/Isopropyl and some extras. Uses t-nut mod from 6d6178 (https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards).
This cable tie / zip tie organizer is made to fit a standard 1" O.C. pegboard. It is printed as two pieces and requires minimal support. It could also be used to store things like pins, dowels, rods, glue sticks, etc. Minimum length of…
Store a nozzle wrench and a glue-stick with this Gridfinity block.
This holds Elmers and Bambu gluesticks snugly. It has 2 curves in it so even though the bambu sticks are smaller, they don't move around Four 6x3mm magnet holes in case you need them
2x1x6 Gridfinity bin. Holds the following: - Bambu gluestick (OD 25mm) - Bambu liquid glue - Bambu 2.0mm hex key - Bambu 1.5mm hex key - Bambu 0.2mm needle
I couldn't find quite what I wanted, so I made something new. This is a holder that can be attached to an enclosure with wood screws or double-sided tape. The holes were designed to work with #6 or 3.5mm wood screws. The holder was…
Hold all your gluesticks in one area ready and close by your 3d printer.
For 20 Sticks (2x10) 7mm x 10cm..i use it for 10 Sticks Glitter and 10 Sticks normal Glue
Designed in tinkercad. It holds 24 gluesticks brand Record (36g) Printed for kindergarten :-)
Print in place, no supports needed. Works great in PLA, PLA Silk, and PETG. The inner diameter of the hole is 20mm. Designed to hold a standard cheapo solder sucker with a little bit of play. If your tolerances are tight, this will also…
Print on its side with no supports.
made two versions of a holder that keeps two Gluesticks with 25mm diameter like the ones Prusa sells and a compartment for spatulas I use to apply a thin and even layer of glue when needed. the spatula by Jack works great and is a nice…
This is a glue stick holder that will handle 4 of the standard size items. It is organized in a side mount since my Ska
If you have an idea for a glue or tool holder?? Write to me :) Universal Mount - print time 39min. (PETG, ASA, PCTG) Glue and tool holder - print time 1h 11m (PLA… and can be printet in almost any kind of filament) Glue stick size 23,6mm…
A friend asked me if I could make him a cap for his manual glue gun because he had broken it by loosening it.
keep your fly tying glues, resins, coats, etc in order over your desk
I have designed a platform for placing glue sticks for my Ikea Skadis board. One of the sticks is 31mm wide (40g), and the other is 26mm wide. I designed it with separate nails for Skadis to hold onto. I used Proima PETG filament for…
Double Gluestick holder for with rail mount Aquila Series
A small holder for the various glues and Bambu Lab scraper
A glue stick dispenser for the HSW wall mount system. I made it fit qty.6 of the Elmers Giant Purple Glue Sticks so it can fit 2 packs of 3 from Target. I printed it upside down Recycled PETG with PLA interface supports and it come out…
Organisational for my family is important, so they also know where they should put it back!
Gluesticks roll alot...they're round...it's bloody annoying. This holder works great and holds six of the large ones (they come in six packs so it's perfect). If you 3d print you probably have these...a number of them are probably on the…
Just a simple replacement for your normal hot melt glue sticks. (Both sizes 7mm and 11mm) Please make sure your glue gun can melt the material you are going to print this in. I don't recommend anything hotter than PLA. Make your stick…
i needed somewhere to keep my glue stick and a new guide.
This is a practice design. I wanted to practice CAD software by building something useful so I designed this block that you can use to store the glue stick included with a Prusa printer as well as the acupuncture needle and alcohol wipe.…
Based off of a reddit post I created this model and another to start the process of making a mold for melting scrap PLA into glue sticks to be used with a glue gun. Used the Ribbed Glue Gun Sticks model to create this. Note: I have not…
Based off of a reddit post I created this model and another to start the process of making a mold for melting scrap PLA into glue sticks to be used with a glue gun. Used the Ribbed Glue Gun Sticks model to create this. Note: I have not…
GlueSonic Projector Art Project
Inner Diameter = 28mm , my glue is 26mm. I think its common size for GlueSticks.. 12/02/2025 - Rotated Insert for GlueStick or Anything else diameter 42mm
A masking tape and gluestick holder that can be mounted on the rails of the Lotmaxx SC-10 Shark. It was designed to fit the Lotmaxx SC-10 Shark (V1), but it should fit also other printers that use the same rail system (ex. Lotmaxx SC-10,…
A simple holder for instant glues, activator and sticks, or toothpicks with storage space. Printing nozzle 0.4/0.2 mm layer, PLA. Jednoduchý držák na vteřinová lepidla, aktivátor a tyčinky, nebo párátka s odkládacím místem. Tištěno tryska…
I created the original holder to be wallmounted, but it doesnt have screw holes. I mounted my holder with dobble sided tape. Enjoy :)
simple gluestick holder for the big gluesticks. step file for editing to fit yours
Gridfinity 2x2 Nano Polymer Adhesive & Elmer's Gluestick Holder This Gridfinity-compatible holder is specifically designed for storing and organizing Vision Minor's Nano Polymer Adhesive and Elmer's Standard Purple Gluestick. Perfect for…
Holder for Glue stick used for Bed Adhesion. Designed to be used with DoveHolder rail organization system. https://www.printables.com/model/1078646-doveholder-tool-organization-system Printed on Bambu P1S with support at .28mm layer…
1: 30Ø for 3dprima gluestick 2: 26.5Ø for danish gluestick magnets at bottom
I designed this simple model to allow for the storage of a gluestick on a Multiboard panel. The internal diameter is 25.5mm for an easy fit. If you print this model, please post a make.
Ein einfacher Stick um Kleber in Ecken verstreichen zu können wie ein Silikonspachtel. Ich verwende es für Holzleim Ecken wenn zuviel herausgedrückt ist.Auf jeden Fall ist TPU nötig damit es Elastisch ist und sich genau in die Ecke…
Print Orientation: Print standing upright (as mounted). Enable supports for pegs.
35mm 1x2 Gridfinity bin designed to hold a bottle of Tri-Flow (2oz/69ml), Tri-Flow straw and an Elmers glue stick (0.7oz/20g).
This is a gridfinity holder for larger gluesticks. This holder here by James Sutherland is perfect for Elmer's Glue Sticks, but if you have larger ones, like from GEEETECH, they may not fit. I designed this one based strongly off of…
Hi this is my first attempt at 3D modeling, i just wanted a way to carry my bambu glue stick with my 3d printer and thought id try to make a simple little holder for it. I forgot to make holes and just drilled them in the end but if…
I picked up a Creality runout sensor, but the included bracket required quite a bit of disassembly. I really wanted to avoid this. I finally got everything zeroed in and taking apart so much would undo a lot of that work. So I designed…
The holes are spaced so they fit all metal "pegboards" with 12mm hole spacing, here in Sweden that is all the ones sold by Biltema, Clas Ohlson, and Jula at least. Originally published on YouMagine back in 2016
simple 1x1 gluestick holder for standard small gluesticks.
Glue stick holder that mounts to horizontal 20x20 v-slot rail. Uses a M3 8mm screw and a rotating nut.
2 different sized inserts for different vial sizes. I removed the square extrusions in the lid, it prints a tiny bit faster and is easier to fit foam into if you want to do that. See original model for the bottom half of the case, I…
