Liczymy pasujące modele…
Custom Quick Swap Plates for VEX. These use 10x3MM Neodymium magnets and are superglued into the plates. You will need to either have a Multicolor 3D printer, or use a M600 Macro to swap between colors. The plates are blank so they will…
Unterlegplatten in 1mm bis 6mm Stärke. Perfekt für den Küchenbau oder ähnliches.
I proudly present to you: The Alien Egg Plant :-) It took me some time to rework my Valentine's Day Plant into this one. But now it is done. Have fun printing and painting! -- Another plant for tabletop gaming and a nice addition to the…
NO AMS, NO SUPPORTS ✅ Use glue when assembling 💧 Don't forget to give me a like 🧡 Share photos of your prints 🍆 ©Personal use only 💀 👉 Check My Patreon and Boosty 👈 Join my Telegram! ⭐💬
I pumped up the runway tiles to 175% in width (175mm x 175mm) and 125% in height (2,5mm is stable enough) to fit the 1:144 airplane models for playing. Check out the additional models: Settings Value Infill 10% Perimeters 2 Layer Height…
This is an original design for holding deburring tool on Skadis boards. It can be printed without support. It needs one T-Clip by LineArcLine to fit flush, they come in two versions - one for black/white skadis boards, one for unpainted…
A bottle with screw cap (and recess for an O-ring) that resembles an aubergine emoji. The test print in the photographs is 70% scale. Category: Containers
Print Settings Printer Brand : Creality Printer : Ender 3 V3 SE Supports : No Layer Height : 0.2mm Infill : 10% Filament : PLA
This model is compatible with the lego system.
Just a friendly eggplant with articulated legs to dangle on the edge of things. No supports necessary.
Looking for a low power home lab with high performance networking? Upgrade your Intel NUC 12 Pro with a 10Gbe LAN module! Works out of the box with ESXI8 and Proxmox 7.4 and uses about 12 watt idle in Proxmox, 14.5 watt idle in ESXI.…
A multi use vessel that is printed in three pieces: The base, the cap, and the peduncle. The print does not use any supports and is easily scalable. You can print the base and the cap at one time and the peduncle separately. I normally…
This model is inspired by the very best Italian gesture, pinched fingers. I modeled the hand in DAZ studio and put it together with the plate in my favorite Fusion360. I will start printing it tomorrow and upload fotos of its soon. I cant…
Dust Cap Fuel Cover Lid for autogas - GPL - LPG Filling Point. Use the spring from old cover and place that in this one after print! I made this one because the standard one fitting is sometimes too tight. print without support.
I didn't have the magnets from the original design, so I modified it to take 6mm x 3mm/2.75mm magnets. Generally, when you purchase 6x3 magnets they are closer in size to 6x2.75, so please adjust the holes to 3mm if your magnets are true…
This is a simple magplate that i made for my Mp5 mags to make it easier to grab while in the heat of the moment. I have also included a version without the handle if you just want to replace the normal one. For printing i would not…
Superseal AMP 4 Connector Blank Cover LPG/GPL Originally designed for LPG/GPL diagnostic connector inside engine bay. No supports needed. Layer height 0.2 mm.
A plate for labeling ammo cans , pops right into place and can be swaped with ease , one is designed for labeling with Brother QL-700 or similar printer 62mm wide labels which fit in between two ridges, keeping them in the center. Now you…
I designed this mountingplate for the window adapter on the exauhst of my A/C(Comfee MPPH-08CRN7), so I could screw it on to a wodden board. The plate is quite a bit larger then needed, because the hole that I sawed into the board is also…
Capture the essence of a unique Christmas with our 3D model of a simple Eggplant Ornament from Thangs.com. This distinctive decoration adds a playful twist to traditional holiday decor. Designed with detail and precision, it reflects an…
Devices which need screws in a wall to mount on, but it is difficult to place them? For small electric devices/computer accessories like home routers / gateways / CPE small network switches battery chargers Requirement to be usable, it is…
with this mounts you can store up to 6 printingplates under your desktop/printertable. should fit for different brands! Just glue or screw it under your table or desktop. Dieser Druckplattenhalter fasst bis zu 6 Druckplatten unter Deinem…
This utilizes one of the M19 threaded ports on the FormD T1 to add 10 Gigabit Ethernet using the Innodisk EGPL-T101 M.2 module. Use M3 screws to attach the ethernet port to the gasket. Make sure the screw head does not protrude past the…
Unterlegscheiben zum Unterfüttern in 1 mm Stärke Maße: 14 mm x 50 mm x 1 mm
you obviously need to print mirrored :). snugs in place like a charm!
Well, I wanted to take out my old Burton board for a spin, but I only have NOW bindings at the moment. NOW does not sell a mounting plate for their bindings that match the old Burton 3D hole pattern. So I created one. I have Printed this…
NASU This is an unsupported output if the printer and slicer are properly configured.
Zbrush doodle. Print instructions Licence: Creative Commons - Attribution - Non-Commercial Category: Sculptures
This is a fully printed 1:28 scale RC car chassis designed to be compatible with Mini-Z components. The chassis is intended for hobby RC projects, experimentation, and further customization. All parts are designed for 3D printing and can…
Non suport printed low poly eggplant!
Kids Art - Earl Eggplant 3D printable model.
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Bring the lovable Sackboy from LittleBigPlanet to your…
An eggplant for pretend play, no supports needed, needs to be glued together after printing. Pre-painted 3MF provided. Filament colors used in photo- Polylite Pro Dark Purple PLA and Polylite Jungle Green PLA
Magpull-style floorplate for AK-V / Scorpion mags! Supports should not be required. Models oriented for best strength.
Meet Wobble-Gine , the world's happiest, bendiest eggplant! 🍆 He's purple, he's perky, and he's got moves like Jagger—if Jagger were made of segmented plastic and printed layer by layer with love. Whether you're stressing over work or…
When you need the big gun fot that stubborn ice.
An additional plate printed in TPU to use for friction and spacig.
Moonlight Luke haben Verriegelungsblöcke, die manchmal etwas kurz sind. Damit die Verriegelung tiefer eingreift, kann man diese Platten zwischen den Rahmen und die Blöcke legen. Sie benötigen entsprechend längere Schrauben.
TV plater MUG/Cup/glass with peanut cups… Plateau TV pour verre/Tasse et recipient pour peanuts...
I'm excited to share my latest creation: a 3D logo of ggplot2 that is not only a great representation of the R package, but can also be used as a magnet or decoration! This 3D logo is a great representation of ggplot2's ability to create…
I just made a little backing-plate to reinforce the area and hole it passes through for the filament pass-through, to give a slight bit more rigidity.
Wanted some custom feel to this great case design. Added the patterns on top as decorations. And on the bottom to also serve as ventilation. Unlike the original I printed mine with top and bottom layers. I also printed my case as…
Für die kleine Kantenfräse habe ich nach einer Alternative zu der mitgelieferten Grundplatte gesucht um z.B. Dübel und Kanten zu bündig zu fräsen. Die o.g. Kreisschneideschablone wurde verändert und getestet. Hauptänderung: Platte nach…
Simple eggplant plant tag
This is a mounting plate for the Duet 2 Ethernet/Wifi board to go in a Anycubic Chiron I designed this to be able to use the factory holes for the SD card. If you have a Ethernet version like i do you just have to elongate the hole 10-15…
The base is ~21mm wide and the mountingholes are designed for M5 bolts. The original STL was simply edited in Tinkercad: https://www.tinkercad.com/things/hy28HeSU37N-swanky-stantia-amberis/edit?sharecode=gQmRYtR4-riZ
Just a scan of a real eggplant from my garden. The middle model is printed in polymaker poly terra army purple with the stem in bambu matte green. The other models are painted
First, I mounted the ESP32 camera on the printer using the “MK3S+ ESP32 Cam Camera Mount” by @detlassnake_289499. After being dissatisfied for a long time, I wanted to mount the camera on my PLATSA enclosure, so I developed the base plate…
because i lost the original mounting braket i printed a new one for me. M4 inserts are needed.
Der komplette Vibraphonrahmen ist bis auf vier Holzleisten und wenige Aluminium-Standardprofile nahezu komplett einschließlich der Resonanzrohre und der Klappenwellen aus PETG oder TPU 3D gedruckten Teilen hergestellt. Aufgrund der vielen…
Simple 45mm mounting plate with imbedded magnets to use for mounting devices such as cameras, sensors etc... The plate can be mounted via the screw mounting holes or magnetically to a magnetic surface. In kind, the device (camera or…
This extension gives space to add a mini breadbord next to the Arduino for convenient work and positioning. Out of respect for the creator I kept the markings on the bottom side.
Devices which need screws in a wall to mount on, but it is difficult to place them? For small electric devices/computer accessories like home routers / gateways / CPE small network switches battery chargers Requirement to be usable, it is…
First, I mounted the ESP32 camera on the printer using the “MK3S+ ESP32 Cam Camera Mount” by @detlassnake_289499. After being dissatisfied for a long time, I wanted to mount the camera on my PLATSA enclosure, so I developed the base plate…
This is a fully printed 1:28 scale RC car chassis designed to be compatible with Mini-Z components. The chassis is intended for hobby RC projects, experimentation, and further customization. All parts are designed for 3D printing and can…
This model is compatible with the lego system.
I got angry with the mug, he is swallowing the interdental brush. I had to make a something for help with it. Print instructions Category: Bathroom Print Settings Printer Brand: Prusa Printer: i3 MK3 Supports: Yes Filament: Prusament PLA…
Eckverstärker für Campingplanen / Tarps / Sonnensegel. Planenstärke 0.4-0.6mm. Die Eckverstärker sind dafür gemacht Ring ösen zu verstärken das die Plane nicht ausreißt bei Sturm oder anderen Beanspruchungen. Zum Verbinden der…
I lost the screw cap for the LGP fuel filler point, so I took the chance to make my own 3D printed version. The screw cap has a M10 thread. The diameter of the cap is: 42mm at the bottom 54 mm at the top The "screw part" needed a quick…
Fun Eggplant Keychain Keep yourself entertained with this wiggly eggplant keychain. Just don't show it off at work. Requires compatible jump ring keychain attachment (example from Amazon: https://www.amazon.com/dp/B07TVK54L3). Eggplant…
Zie mijn andere ontwerpen voor materialen die je kan gebruiken samen met de rijgplaat. Als je de stl download moet je het ontwerp opsplitsen pet object. De stokjes dienen liggend geprint te worden voor extra stevigheid. Daarna kan je ze…
i've lost my GPL plug on my LADA NIVA, so i create one ! on left, an original one, and right the 3D one, with paint . j'avais perdu mon bouchon GPL sur mon LADA NIVA, alors j'en ai créé un et imprimé ! et il est sur mon vehicule. a gauche…
Stichel Beschriftungsgerät für 8-Punkt-Braille. Zum Vervollständigen wird eine aufgebogene Büroklammer oder ein Draht benötigt für das Scharnier. Des weiteren ein Stecher für das sticheln der Brailleschrift. Zum Beispiel ein Stecknadel.…
We used Slicer Goodies on here to make the lettering and not sure where we got the blank plant label from. Hope every one likes it. Look at all the other plant labels in our collection.
Winkelprofil für 16mm Stegplatten. Ermöglicht das werkzeugfreie zusammenstecken von Stegplatten. Ich habe mir damit ein Gehäuse für den Drucker zusammengesteckt. Angle profile for 16mm web plates. Allows multi-wall sheets to be plugged…
U-Profil als Eckverbindung von Stegplatten PETG
So my in-laws have an eggplant eating party every year, and this year we decided to have a contest, so I made this eggplant cup. There are fusion 360 files and stl files.If your last name is Vrotsos, you're in luck, as I put the one I…
Die Unterlegplatten sind dafür gedacht bei unebenem Boden die Möbel ausrichten zu können.
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
This help with storing small stuff while we are working on assembling large things!
i've lost my GPL plug on my LADA NIVA, so i create one ! on left, an original one, and right the 3D one, with paint . j'avais perdu mon bouchon GPL sur mon LADA NIVA, alors j'en ai créé un et imprimé ! et il est sur mon vehicule. a gauche…
Manta M8P Coolingplate with 60x60 an 80x80 fan. You will need: 8x M3 Heat-Inserts 2x M3x45mm Screws 1x M3x40mm Screw 8x M3x8mm Screws 1x 60x60 fan 1x 80x80 fan
Multimaterial print of a plant label with an Eggplan on it, also included the french “Aubergine” version which is the one that I actually printed
I created a plug foot 10mm or 3/8" plate 1mm thick so one can put sticky grip feet on. Tried to keep the tolerance for magnet hole in mind so it fits snug but given how prints turn out +/- may need a dab of CA glue or force. Mine are…
