Liczymy pasujące modele…
This is a from-scratch sculpt of the Sheika Guidance Stone from The Legend of Zelda Breath of the Wild. This is not an exact copy but I think it keeps the spirit of the original. I made this on a quest to make my own visually working…
Suitable for volvo xc90. I have installed the one to my car in place of broken LH 1882 & RH 1882 part. On the picture is the draft part to check the suitability on place. I'll print the proper color later.
Hi there, I don't like that the Filament spool is placed on the back of the machine. So, I've put the spool on the side, which makes it much more convenient to change. To provide a bit more guidance, I've designed this little arm. I…
It's not the design, that makes a tool great, it's the result you create with! Importance of a drill guide: Not to find only the position but easily(!) the real exact position! A drill guide that should be usable also after 5 holes needs…
This is a guidance for filament. Perfect for organizing filament flow on your skadis board. You should print it in PETG or ABS due to its tight fit. Category: 3D Printer Accessories
Hello, I like the job made by Der_Dennis, thank to share it is cool !, i remix and added a M3 nut on arm in order to add a metric screw, in addition you can find a two versions washer to position inside the machine since the hole for the…
Introducing the 3D Printed Functional Saturn V Model Rocket: a fully operational model replica of the iconic Saturn V, the rocket that propelled humanity to the Moon. This model is completely 3d printed, all you need is an engine, a…
Coming up to the 50th anniversary of the first moon landing, I've been amazed by the efforts of Marc, Mike, Ken and Carl in getting an AGC operational, all made possible by Jimmie saving the AGC way back when. If you haven't seen it,…
This is designed to substitute the laser pointer at the CNC cutter machine we have at my company. This is to have a Crosshair to make it easier to find where the laser will hit the material. Clamp works with a 3mm screw and nut
The 7 day pills box for pensioner without glases ie. with tactile guidance
Since I bought a filament dryer ( Sovol 3D ) I had some issues with tension on the filament input on my Anker M5. This was related to the angle filament entering the machine. (Sovol 3D) So I resolved that by using the original filament…
Are you using the CrealityPrint slicer for one reason or another and would like to have the printing stop automatically at the right point? If so, then with these instructions it is possible. If you don't use that slicer, you probably…
Latest Update: 13.04.2023 - filament stuck problem fixed the problem that the filament get stucked while trying to giude it through the model. About the model: This model is designed to merge seven PTFE tubes into a single tube, making it…
I printed it with 0.15mm layer height (0.4mm nozzle) and a slow speed (30mm/s). Brim was enough and it fits perfectly. Source file:…
Vor- und Nachteile auf einen Blick: + 60°C Heizpad verwendbar + transparente Box + billig, weil kein kauf einer Box von IKEA/Sunlu nötig + weiterverwendung des original Spulenhalters + weniger Filamentmaterial notwendig, wegen…
Of course there are many cable guides already. My intention was to use the wire's flat shape to define the direction of their bending instead of using the chain-type of guide. The cable routing at the back of the printhead allows the…
Projekt "KeyGuard Station – Adaptive Keyboard Support & Guidance" The problems it solves: Lack of hand strength & pain (e.g., due to arthritis, muscle weakness) Impaired fine motor skills & tremors (e.g., due to spasticity, tremor) High…
I printed this to get my spool off the LACK Table for better vibration resistance and a more straight filament guide. the spoolholder is this one: https://www.thingiverse.com/thing:2047554 Print Settings Printer Brand: TEVO Printer:…
Es wurde eine Verschraubung hinzugefügt, um den Fitting am verhaken zu verhindern. Der Filamentausgang ist nun spitzer, um ein verhaken des Filaments beim laden zu verhindern. Es gibt nun 2 verschiedene längen. Die Vorderseite ist nun…
Guidance for drills or screws designet to help your fingers not being harmed. You just need to put screw on it and focus to push with drillbit :) In case of drilling - it provide 90 degrees guidance for your drills. Enjoy!
sometimes creality sprite extruder can break the filament and it causes to stop the print. This filament guidance fixes the problem. There is a ptfe tube slot inside of the cylinder part. It is print-in-place
3 mm pane thickness bore for screws with 4 mm diameter
A hose holder/guidance for 2 80mm dust hoses for the dusthood i designed. It fits nicely on the sorotec basic line z axis and is mounted with 2 M5x25mm screws into the sliding block (they package more than you need, so you should have one…
You have inherited the ability to hear the dead – and now, the dead warn you of danger. Category: 3D Printing
UPDATE on November 1st, 2025 - Version 3 ----- I was annoyed by the original PTFE tube guide mounted on the printer back pane, so I decided to give it a try to the Creality K1 Max Convenience Mod: Bowden-Tube guidance (…
To guide the Cabel, in my case for a MMU3 to the back side of the Frame of a Prusa i3 Mark 3 (possibly Mk 4)
Some time ago I ordered a people guidance system from Vevor for Halloween: Product link Here the belts are embedded in the posts. However, I had two places where I had no room for the post. I developed this housing so that I could remove…
Tool for repeatable 90° sawings. 1. Align the tool @ the part 2. Fix it with a guide rail clamp 3. saw! I have a BOSCH GKS 18V-LI and it fits perfect. The two parts are mounted with flat head screws M4x 12 or longer screws: (…
When 3D printing, especially when small spools of filament are used, issues can arise with the disorganised release or falling off of filament from the spool, caused by the high accelerations of the printer. This phenomenon is often a…
An old blind guide in my neighbor’s house broke. I created a new, improved version that can restore functionality using a toothpick, a beverage can, and a few small screws.
To guide the Cabel, in my case for a MMU3 to the back side of the Frame of a Prusa i3 Mark 3 (possibly Mk 4)
