Liczymy pasujące modele…
To replace the locking mechanism first you need to remove the hex screw from the inside of the connector, set it and the twist lock that should now come free to the side. Next if it hasnt completely fallen apart by now you need to finish…
EN I bought this tent Decathlon MH 100 (2People) a few years ago. When setting up, the two brackets always unfolded for me. So I always held them together with Velcro, which you use as a substitute for cable ties. But I didn't find this…
This is the cockpit I created for the Der Jet DH100 Vampire Jet Model. The files include all required STL files to print the cockpit parts as well as the resized gauge photos to fit the printed dash panel. This will require an advanced…
A fitted holder for the case of your trusty XM4s! Made to work with Skadis. Best printed upside down, with support enabled. It's possible to save on supports, by just placing a line of supports down the middle, and under the pegs.
This is a custom pump cover for the Corsair H100i RGB Elite AiO water cooler. It replaces the original pump cover and white RGB diffuser that are clipped in with plastic latches. Print instructions: ASA or ABS or any other heat stable…
VFD KeyPad Holder for the H100-1.5C2-1B
I have a thing where I hate logos. So this was a way to make the Corsair logo go away… Sorry Corsair its me not you. I have 3 different models. One I made of my cat, the other is a blank and the other is to make your own if you happen to…
Cover i made for the H100i by Corsair. im not sure if it will fit other models but let me know if it does.
Made this covers per request and got permission to publish. 3 versions with bit different logo designs. I printed them with clear Extrudr PETG on the bottom and black PETG on top. On the bottom parts I used a variation of the…
Corsair H100i AMD CPU socket adapter. AM3 & AM4 *use Intel hardware for mounting (thumb-nuts, standoffs and screws) 28OCT18- Updated the design to allow for the Corsair Link cable to be plugged into the pump...my earlier revision did not…
This is a replacement stopper for the sliding door on a Toyota Hiace (H100) 1989-2004. Tested and fitted on my RZH103R Hiace but should be same across all models from that era. The part that goes on the sliding door has enlarged holes for…
Printed in Elegoo Transparent, I actually left the supports on the back.
A friend asked me to design a replacement lid for the fuse box of her Rover Mini car, so here it is. I printed this one with PETG, and you probably should as well. The original part might have been PVC, and PETG should have similar…
Bithalter für Lista-Schubladen H100 - Links Allgemein: Aussenmasse: 175 x 105 x 50 ( Mit Stahlwille TCS 175x350 kompatibel ) Lista Schubladen: H100 / T450mm ( 105+350 => 5mm TCS Schaumstoff-Klemmung ) Mit Lista-Boxen 150x75mm kompatibel…
When the locks fall apart (and they will), print these out (Left and right are different) Both are included in the file. Then use a soldering iron to heat set the original inserts into these printed replacements. There is a correct…
Disclaimer: this is definitely not the best / easiest to print headset holder around. This was more of an excuse for me to experiment with dovetail joints running along an arc. You're probably better off searching for generic SKÅDIS…
This is a dedicated stand that uses the included charging cable. The cord can be wrapped around the back of the stand.
Bithalter für Lista-Schubladen H100 - Rechts Allgemein: Aussenmasse: 175 x 105 x 50 ( Mit Stahlwille TCS 175x350 kompatibel ) Lista Schubladen: H100 / T450mm ( 105+350 => 5mm TCS Schaumstoff-Klemmung ) Mit Lista-Boxen 150x75mm…
A remix of Fit-over sunglasses temple replacement by broodrooster . Edited in tinkercad to fit my SolarShield 2RH100SE (UPC# 87557700482 I believe) fit-over sunglasses because both original temples have snapped. This is just the left…
This is a part of the mount i made for my friends Thinkware H100 dash cam. The part was missing when he got it and didnt bother contacting the store. Instead, i got the challange to make the part and here it is. I made this in two parts…
It just a simple knurled cylinder. I tried knurling with Fusion 360 for the first time on a simple object. Worked quite well. So have fun with it... Printed on a Prusa Mini with Galaxy Black PETG. Added a D90 variant
Material diverse Layerhöhe 0,2 mm Vasenmodus Linienbreite 0,6 mm mit Düse 0,4 Mit den richtigen Einstellungen ist die sogar wasserdicht. Gutes Gelingen und über ein Like würde ich mich freuen.
Dummy battery with metal connectors made out of M4 screws. Connect to a power source and use the label maker without wasting batteries. Tested on PT-H100LB. Might fit similar models. Standard uses 6x AAA batteries. Materials: 2x M4x25…
you will need a big printer to print this (elegoo neptune 4 max or bigger)
Support for AIO radiator. Printed of PLA except the foot with TPU to limit vibration. The hexagon pattern come from the infill, with removing top and bottom layer with some modifier to get where i wanted. The project was to plug the AIO…
This 3D model set includes a custom FlexATX PSU adapter and an additional reinforcement bracket designed for the Cooler Master MasterCase H100 PC case. The adapter provides mounting points for the FSP FSP220-60LE power supply (not tested…
This model attaches the U shape bracket of the Corsair H100 AIO from LGA 1155 to AM4. Heat resistan filament ir REQUIRED, Such as PC that i have used or similar.
The Top Drawer Bracket for my 72W Single Pedestal Desk (Model Number A189223F) arrived pre-smashed, so I whipped up a replacement part for it. I'd imagine it's used in some other desks or drawers.
These are two different models: one with a tilted cut for angled installations and the other completely level. I’m currently using the tilted version, as my projector has no built-in screw mounts, and this design fits it beautifully. I…
From the Millennium Machines Discord. Silverback_Attack made the lightweight version of the Casa and Jonthanmarsh made the cutout for the H100. I combined them so you can have the best of both worlds. Tried finding their models but had no…
It just a simple knurled cylinder. I tried knurling with Fusion 360 for the first time on a simple object. Worked quite well. So have fun with it... Printed on a Prusa Mini with Galaxy Black PETG. Added a D90 variant
This is a dedicated stand that uses the included charging cable. The cord can be wrapped around the back of the stand.
