Liczymy pasujące modele…
These print-in-place locking handcuffs print without supports. I put in a comfortable number chain links to make them suitable for casual wear. That is, you could wear them at a party and still, say, eat and drink. And most importantly,…
Print-in-place handcuffs with key. Requires small sanding after removing supports, also works much better with a little bit of silicon grease on teeth and key. There is a guide at lock mechanism, to make handcuffs rigid and to prevent…
Źródło oznaczyło ten model jako treść 18+.
Print this model first, to check if hinges are not fused. If hinges fuse - try reducing extrusion multiplier. Model fits on 210x210 build plate. I used PETG for it, but I think PLA is fine too. For printing place supports like this. Do…
I do not like to use glue for anything I may need to repair, so I remixed the model. You will need 6 M3 x 12 mm screws and assorted nuts. 2026-03-23 : my handcuffs collection . 2025-05-08 edit : I've made a second version (V2) with an…
This is a pair of realistic Handcuffs I designed off of a picture I found on the internet. They feature a button activated double lock. After activating the double lock turn the key in one direction to unlock the lock then the other…
This is an remix of a pair of handcuffs, desingned by sthone. ( https://www.thingiverse.com/thing:2487050 ) For the finished handcuffs you'll need 10 'Handcuff_Pin.STL' to hold everything together. A small hammer or vice can be helpful.…
Źródło oznaczyło ten model jako treść 18+.
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
Saw Oakblooms and it reminded me of another handcuff key I saw once. Took his added a ring and made it smaller so it could fit in a Fifth Pocket or hidden somewhere else. I'm going to try and make some more variations of this. Please if…
This is a easily printable model that is well functioning and lots of fun. If your key breaks or gets lost you can make another or, if in need of a faster solution, use something like a bent paper clip to push the lever inside of the…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
Toy handcuffs with key and keyless operation. The parts can be printed in different colors to match your favorite super hero. In the example photo, the lower half of the build plate was printed separately in a different colour. Sized to…
please give a like if you download. thank you.
EN: This is a toy pillory handcuff whose locking piece can be moved and then secured with a rope, a padlock, a carabiner or simply a bolt and nut. At the request of the youngsters, the wrist holes are designed to be rather narrow at…
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
This model is compatible with the lego system.
I do not like to use glue for anything I may need or repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm screws and assorted nuts. Use the original strands and small parts. To unlock the handcuff, insert the…
I lost the keys to these toy handcuffs years ago. I don't actually need them anymore but if someone else gets them in the future, I wanted to be able to give them away with keys. I designed them to look similar to the old ones (from what…
Lost Your Handcuff Key? Quick Fix Available! So, I dropped my handcuff key behind the bed and couldn’t retrieve it—totally vanished. Instead of buying a new set (which felt like a waste), I designed and 3D printed my own key. It works…
Esposas para la practica de Bondage. Ideales para restringir el movimiento. Se pueden acompañar con cuerdas o cadenas. Las fotos que podéis ver esta impresa en boquilla 0.4 y altura de capa 0.2.
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
EN: This is a folding toy pillory handcuff that can be locked with a padlock, a carabiner or simply a screw and nut. At the request of the youngsters, the wrist holes only have a diameter of 48 mm. For ‘adult use’, you can simply scale…
A very simple design for zip tie handcuffs. There are a couple out on other sites but I have different zip ties so this one is a bit more of a tighter fit. I just used some “Hyper Tough” 18-inch cable ties from Walmart
Version updated! Now it´s version 1.1. The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let…
The remix version of the realistic handcuffs doesn't have a key, so I made one.
Modified Lids for keychain pillbox tubes to add a hidden handcuff key.
This is printed with 3DJake TPU 95A and a .4 mm nozzle on the Prusa MINI.
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
Naughty fingers pinching a few too many Christmas cookies? Put a stop to that with these print-in-place fingercuffs. Just slip them over the first or second knuckle and squeeze the ratchet shut. They are sized for about 18mm dia. fingers,…
I used the handcuff ratchet system as a clamp for another project but then went on to re-purpose the design into this toy handcuff design. That’s why it's keyless and better as a toy. I’m not sure they could restrain anyone for long,…
This can hold the cuffs closed below: https://www.thingiverse.com/thing:3413757 It may work with these: https://www.thingiverse.com/thing:2994325 I found that the big version of the nut and bolt worked the best because I could get a…
Simple key. Not a lawyer but breaking out of handcuffs is typically a crime. You've been warned.
A little thing i made to convert two big zipties into ziptie handcuffs. You will need two smaller zipties to connect the two parts together. I guess you can scale it to fit different sizes of zipties. I tried breaking out of them and i…
Keychain police handcuffs
The model is designed for a 0.4mm nozzle. Other nozzles can of course also be used, but the function can suffer as a result. I used super glue to glue the connections. If you find a better glue let me know. If you find an error in the…
I liked these handcuffs, but I didn't like the small chain. So I found a bigger chain. The hook in the handcuffs turned out to be too small for such a chain, so I increased it a little and everything turned out perfectly.
I do not like to use glue for anything I may need to repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm bolts and assorted nuts. 2026-03-23 edit : my handcuffs collection . Note : you will still need a few…
Źródło oznaczyło ten model jako treść 18+.
I recommend putting supports on some pieces of chains, if it doesn't take up supports don't put them, but I do it because I'm a beginner.
The capsule needs to be printed in TPU , as it relies entirely on friction. If the fit is too loose or too tight, try scaling it up or down in your slicer. There are two versions of the key available. The hole for the string in the…
Did you lose those spare keys for your cheap handcuffs? Of course, you did they're tiny. Don't throw them away though, just print these.
This model is compatible with the lego system.
A few cookie cutters in a police theme. Handcuff and pistol. Added two files with thicker cutter calls
The fingercuffs by LoboCNC were almost a perfect fit for the gi joe action figures my stepson has, but I had to modify these to fit the figure. The only reason I'm uploading it like this is it was VERY difficult for me to find these…
What you'll need: M5 x 30mm Screw x2 (Main bolt) M3 x 25mm Screw x2 (To attach the locking mechanism) 10x3 mm N38 Magnets x4 (To make them more secure (OPTIONAL!)) Category: Hand Tools
No support needed Parts required : 1x M4 heat insert 1x M3 heat insert 1x M4x40 screw 1x M3x20 screw
English version This is a remix of Printcuffs irish handcuffs. You will only need 3 M3x20 mm screws to assemble it. No glue at all. This is the medium model, with strands loop height around 6.5 cm . Check the large (…
designed to be printed in mostly TPU for actor saftey (and ease of breaking or coming apart if accidents happen print 2 copies the only piece metal is the spring. the chain can be extended and added links to . and printed in place if…
Lots of great binder models online, but I wanted one with: No magnets Using soft TPU as a printable insert to press against your wrists The only thing you need is 10x 20mm m3 screws (you could get away with less, hypothetically 2 plus…
English version This is a remix of Printcuffs irish handcuffs. You will only need 3 M3x20 mm screws to assemble it. No glue at all. This is the small model, with strands loop height around 5.5 cm . Check the large (…
English version This is a remix of Printcuff's irish handcuffs. You will only need 3 M3x20 mm screws to assemble it. No glue at all. This is the large model, with strands loop height around 7.5 cm. Check the medium (…
Soft handcuffs made from TPU. Printed in one piece, yet flexible and softly bendable. The complete print already includes the chain between the handcuffs. They are only fastened with snaps, but still hold quite firmly. The chain is…
Print-in-place is possible if you like :)
Please note that this handcuff model is intended purely as a toy or prop. It is not meant for real restraint or security purposes. The design does not require keys to unlock, ensuring no safety concerns about being locked or trapped. I…
(recommend printing with resin) and (fit to person hand in printing software)
To tighten the handcuff of your camera on your wirst. That you can´t lose them. Category: 3D Printing
Zip Tie (Riot) Handcuffs - Adaptor for 0.35 inch thick Zip Ties Head of the zip tie goes through the big holes on the sides and the other end of the zip tie goes through the smaller holes through the head of the zip tie. Pull rind has…
EN if you are going to slice it yourself then put a brim on the chain and some supports unfortunately the chains don't look the best because of how small they are CZ Pokud si to budete slicerovat sami tak dejte na řetěz límec a nějaké…
A tactical case designed to hold two pairs of ASP chain handcuffs stacked back-to-back.
A few cookie cutters in a police theme. Handcuff and pistol. Added two files with thicker cutter calls
I liked these handcuffs, but I didn't like the small chain. So I found a bigger chain. The hook in the handcuffs turned out to be too small for such a chain, so I increased it a little and everything turned out perfectly.
Lots of great binder models online, but I wanted one with: No magnets Using soft TPU as a printable insert to press against your wrists The only thing you need is 10x 20mm m3 screws (you could get away with less, hypothetically 2 plus…
Soft handcuffs made from TPU. Printed in one piece, yet flexible and softly bendable. The complete print already includes the chain between the handcuffs. They are only fastened with snaps, but still hold quite firmly. The chain is…
Clé de menotte discrète, version imprimable en 3D économique / Inconspicuous 3D printed handcuff key , low-cost alternative. À imprimer en plusieurs exemplaires pour éviter la surchauffe et avec une faible hauteur de couche pour plus de…
I do not like to use glue for anything I may need or repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm screws and assorted nuts. Use the original strands and small parts. To unlock the handcuff, insert the…
I do not like to use glue for anything I may need to repair, so I did a quick remix of the original model. You will need 6 M3 x 12 mm bolts and assorted nuts. 2026-03-23 edit : my handcuffs collection . Note : you will still need a few…
What you'll need: M5 x 30mm Screw x2 (Main bolt) M3 x 25mm Screw x2 (To attach the locking mechanism) 10x3 mm N38 Magnets x4 (To make them more secure (OPTIONAL!)) Category: Hand Tools
A little thing i made to convert two big zipties into ziptie handcuffs. You will need two smaller zipties to connect the two parts together. I guess you can scale it to fit different sizes of zipties. I tried breaking out of them and i…
I do not like to use glue for anything I may need to repair, so I remixed the model. You will need 6 M3 x 12 mm screws and assorted nuts. 2026-03-23 : my handcuffs collection . 2025-05-08 edit : I've made a second version (V2) with an…
Clé de menotte discrète, version imprimable en 3D économique / Inconspicuous 3D printed handcuff key , low-cost alternative. À imprimer en plusieurs exemplaires pour éviter la surchauffe et avec une faible hauteur de couche pour plus de…
How to build: Print as many links as you want. (≅5-20) Print 2 of everything else. Click the links together to make a chain. Put a cuff P1 and cuff P2 on a hingeamajig P1, then glue a hingeamajig P2 on top. Repeat step 3. Snap the…
Small handcuff for dummy 13. Remove the hands. pass one of the hand connectors though the middle at a time, reattach the hands. Will flex a little during instalation, this is on purpose.
