5860 modeli
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Wydruk około 22,38 €–27,35 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
An elegant attempt at rethinking a traditional Christmas tree Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Product page here: https://www2.hm.com/en_us/productpage.0812790001.html Nozzle: 0.4-1.0mm Layer: 0.2-0.8 (Recommended) No Supports needed Scale it as you like :)
Wydruk około 10,53 €–12,87 € nettoWstępna wycena jednego wariantu
Found this awesome print at: https://www.thingiverse.com/thing:5008465 Nothing to it but to do it.
Wydruk około 10,45 €–12,77 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Any feedback would be greatly appreciated . Work in progress Use 6=9 Nozzle: 0.4 Layer: 0.2-0.24mm (Recommended) No Supports needed No Brim needed Scale it as you like :)
Wydruk około 9,33 €–11,41 € nettoWstępna wycena jednego wariantu
Most HomePod wall mounts I found had a baseplate that was actually obstructing the high frequencies of the sound when mounted overhead. So I designed this one with the smallest base possible. The HomePod holds fine on its own but you…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Chain Chomps Chain Chomps from Mario Universe known in Japan as Wanwan, are metal, barking ball-and-chain-like creatures that are restrained by chains. List of parts to print : 1 Body 2 Lower teeth 3 Upper teeth 4 Chain screw 5 Chain…
Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu
Thomas the Train.
Wydruk około 13,06 €–15,96 € nettoWstępna wycena jednego wariantu
Marge and Homer Valve Stem Cap : Bike Cap Fits Schrader Valve Stems.
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
Magnet of the University of Oklahoma Sooners Logo. It is designed to fit 6mm x 3mm magnets. Base layer should be white. G-CODE has two layer pauses: 3.8mm: add magnets 4.2mm: color change to crimson red
Wydruk około 1,27 €–1,55 € nettoWstępna wycena jednego wariantu
The Brigitte Bardot is a trimaran of the Sea Shepherd Conservation Society. Since it is very difficult to make a one-to-one copy of this ship, I have drawn a strongly leaned version. Have fun printing :) Print instructions Licence:…
Wydruk około 2,79 €–3,42 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have Homer Simpson for you. Very cool characters. It is suitable for coloring. My children absolutely love it :-). Important: If the character does not stand and somehow…
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 5% Supports needed Scale it as you like :)
Wydruk około 9,40 €–11,49 € nettoWstępna wycena jednego wariantu
This is a project I put together as a gift for my niece. I've only made the one and I was super pleased at how well it came out! I used the existing (Totoro)[ https://www.thingiverse.com/thing:12146 ] model by (Joo)[…
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
Hello, here's Miffy, a Dick Bruna's sculpture. Thanks for your download, enjoy the print!
This is a wallmount for the Home Assistant ZBT-2 zigbee/thread antenna. The mounting holes are designed for M3 countersunk screws. Overall it has a snug fit and offers enough resistance that the antenna cant easily fall out of the mount.…
Wydruk około 1,24 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 12,99 €–15,88 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 10,39 €–12,70 € nettoWstępna wycena jednego wariantu
I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.2-0.3mm (Recommended) Infill 25% Supports needed Scale it as you like :)
Any feedback would be greatly appreciated . Use color change/pause at layer Nozzle: 0.4 Layer: 0.1-0.2 (Recommended) No Supports needed Scale it as you like :)
Wydruk około 0,90 €–1,10 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.32mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Wydruk około 18,44 €–22,54 € nettoWstępna wycena jednego wariantu
We have had this lamp proudly displayed in our home in our foyer for nearly a year now and we get lots of compliments on it! It is super easy to print. This lamp assembles from 12 sides all printed flat on the printer's bed, which then…
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
Da bei meiner Homematic-Wetterstation ein Löffel vom Windmesser abgebrochen ist (gemäss meinen Kindern, hat der Ball diesen beinahe nicht berührt :-) ), habe ich eine neue Nabe und Windlöffel gezeichnet. Die Form und die Idee für die…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Case for a Raspberry Pi 4 B running Home Assistant OS with two modules : Zigbee 3.0 USB Dongle RTL-SDR Dongle for 433 Mhz devices Other components used : 30mm fan (from my previous RPi 4 case) 4x m3 insert (CNCKitchen M3 standard insert)…
Wydruk około 6,40 €–7,83 € nettoWstępna wycena jednego wariantu
Made on both the Prusa Mini and Bambu X1C (Bronze on the Bambu and Red on the Prusa Mini)
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 7,70 €–9,41 € nettoWstępna wycena jednego wariantu
Danfoss Adapter Print: Material: PETG or PLA Layer: 0,2 mm Brim: 5mm Finnishing: Cut the Ring open at on of the Notches with a Saw. Afterwards you can Fit it onto the Valve. At last Screw on the Homematic Thermostat
Ich habe mich schon lange gewundert, warum es keinen Homer Simpson Skin für Soozafones Mini 13 gibt. Da ich aber schon von Kindesbeinen an Simpsonsfan bin, musste ich selber tätig werden. Das in den Bildern dargestellte Ergebnis ist auf…
Wydruk około 0,59 €–0,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These handy and aesthetically appealing stoppers are an ideal solution to keep your doors exactly where you need them while adding a unique decorative element to your interior. The carved cat motif is sure to delight all lovers of these…
Wydruk około 1,81 €–2,21 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Magnet of the Oklahoma State University Logo. It is designed to fit 6mm x 3mm magnets. Base layer should be orange. G-CODE has two layer pauses: 3.8mm: add magnets 4.4mm: color change to black
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
El Chombo : Dancing Green Alien
Wydruk około 1,61 €–1,97 € nettoWstępna wycena jednego wariantu
Print it with 0.15mm layer hight and black matte PLA. The notch simplifies installation. This makes it easy to screw in. Use at your own risk.
Wydruk około 7,69 €–9,40 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 13,94 €–17,04 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Use the tube for the A-Wing Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
This is a wall mount for a SiliconDust HDHomeRun Flex 4K ATSC 3.0 NextGen TV tuner. Included are the associated Fusion 360 source .fd3 , .3mf, .stl, and G-Code (PTEG 15%, infill) files. Photo shows the top of the case facing out. However,…
Wydruk około 4,61 €–5,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to control the tilt of my 2" venetian blinds through Home Assistant using ESPHome. My first setup was using a 28BYJ-48 stepper motor which worked but is was barely strong enough for the job. I had to use gear reduction to power…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
Rare Dathomiric Ritual Bottle from 600BBY. An Item believed to have been once located and used in ceremonies within the Tomb/Palace of Kujet Script seems to be an ancient form of Sith. Some of the symbology is related to symbols later…
Wydruk około 8,45 €–10,33 € nettoWstępna wycena jednego wariantu
Off-Duty in the Outer Rim Collection : R2-Homebrew. A first in a series of bas-reliefs that give us a glimps into the lesser know pastimes of the cast and creatures of starwars. It is widley believed that R2 began this hobby after…
Wydruk około 10,71 €–13,10 € nettoWstępna wycena jednego wariantu
Files are updated with additional joints for ease of connection. Highly recommend supports and gluing the pieces together. Update 9/22: Sincerely apologies for the incorrect sizing of neck1 and horn earlier. Everything is properly fixed…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
A remake of the Raspberry Pi 4 B Case - Home Assistant. One centimeter longer so it will fit the sonoff 3.0.
For 18 Homeopathy tube (Boiron)
Wydruk około 2,73 €–3,34 € nettoWstępna wycena jednego wariantu
Peça de substituição, batente fechadura de gaveta autocaravana Burstner que se estragou. Replacement part, Burstner motorhome drawer lock stop that was damaged.
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Instructions Print the cap and put it on a AA battery Stand the battery up on a neodymium magnet Take a piece of copper wire and bend it in the following shape (also see photos): Place the wire onto the battery and watch it spin! The cap…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 8,45 €–10,32 € nettoWstępna wycena jednego wariantu
Bring peace and positivity to your space with this 3D printable Om Diya Holder . This minimalist design features a sacred Om (ॐ) symbol cutout on a curved backplate — representing calmness, balance, and unity. 🪔 Design Features: Smooth…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I saw this Video, and didnt find the 3D modell for it, so I made it. Sorry… If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to…
Wydruk około 0,57 €–0,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
corrected version
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Gehäuse für HomeMatic HM-LC-Sw1-PCB Funk-Schaltaktor 1fach. Zum Fixieren wird eine M3x5 Schraube benötigt. Ich habs mit PETG gedruckt…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a ESPHome based Hichi/Volkszähler interface specifically for the Holley DTZ541 that has alignment pins instead of the more common round indent around the IR interface. UPDATE 2023-01-29 Previously mentioned issues with the…
The Phomemo P12 Pro label printer has been great for aiding in my Gridfinity organisation. So I wanted to organise the tool which helped me organise. This model is a 3x2 Gridfinity bin which holds the Phomemo P12 Pro along with 2 label…
Wydruk około 3,30 €–4,04 € nettoWstępna wycena jednego wariantu
A cool looking Raspberry Pi 3B case inside Home Assistant logo :) The model uses 2 colors yet it designed to be printable on a single nozzle printer thanks to Z hop feature. The model has a GoPro mount which allows mounting the case on…
Wydruk około 2,32 €–2,84 € nettoWstępna wycena jednego wariantu
When I had to take the silica out to dry, part of it was always stuck under the seal. So I designed a tray to make it easier to handle the silica. At first I planned a more robust one, but I was reluctant to use so much filament on it, so…
Wydruk około 2,36 €–2,89 € nettoWstępna wycena jednego wariantu
NEW: Homing bump variant is now available! This model is made to fit into the standard key switches that come with the Voyager. It is definitely not as high quality as the ZSA caps, but it works if you just need to replace one or two…
Wydruk około 0,26 €–0,32 € nettoWstępna wycena jednego wariantu
Deigned for standard 1in/25mm spacing (0.25in/6mm hole) pegboard. SLDPRT can be easily modified for other configurations. Prints well with no supports.
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4-1mm Layer: 0.32-0.6mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Wydruk około 17,02 €–20,80 € nettoWstępna wycena jednego wariantu
Context After searching for a good HomePod Mini wall mount, I always encountered the same issues. either no cable management, or hanging below the socket, and most important with all the weight on the tiny Apple charger. Why yet another…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Toilet Pneumatic Flush Button Made to replace button on a Thomas Dudley Pushflo Petite Single Flush 46mm - 320185. Just pushes on, friction fit. Now revised as the thin part of the plunger can snap with the original version.
Wydruk około 0,33 €–0,40 € nettoWstępna wycena jednego wariantu
I created these Key Tags as a simple way to label keys with text and color-code them as well. I've provided 206 3MF and 206 MK4 g-code files with pre-defined text to get you going straight away! Choose from automobile makes and models,…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Hi! I use a simple IR-Remote to control some of my smart-home devices and automations using home assistant. I built this little IR-Receiver using an ESP32 (CH340) USB-C Board and a KY-022 IR-Receiver. Both very inexpensive components. I…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena jednego wariantu
Home Assistant Yellow stand for mounting device vertically, Printed on a Prusa Mini+ using Paramount3D PETG filament, but any filament is fine. Normal settings at 0.2 layer height.
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed
Wydruk około 6,78 €–8,29 € nettoWstępna wycena jednego wariantu
This is a very simple and easy to print model of base plate or mounting for Apple HomePod. HomePod is fitting perfectly into a recess. Can be placed normally (vertically pointing up) or tilted on the side to expose touch panel more to the…
Use - D1 mini esp board - BH1750 light sensor
Wydruk około 5,96 €–7,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Un sympathique bonhomme de neige tricolore à accrocher. Fichier freecad fourni.
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
Exclusive Commercial License on Patreon: For those looking to turn their prints into profits, I offer a Commercial License on my Patreon page. By subscribing, you gain the right to sell the physical prints without sharing the digital…
I modified the base to channel the air better and added a handle for stabilizty. All other hardware per LoboCNC original design. See his URL for projectiles: https://www.printables.com/model/405948-whomp-squadron-and-launcher
15% infill .1 Layer height Organic support
Wydruk około 13,72 €–16,77 € nettoWstępna wycena jednego wariantu
I use the HC-SR04 sensor to measure the distance of a person approaching to turn on or off the light with Home Assistant automation. I use the D1 Mini board.
Wydruk około 2,49 €–3,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Výhoda této sponky je, že tolk nezmačká papíry.
Wydruk około 0,79 €–0,96 € nettoWstępna wycena jednego wariantu
Dieses Modell ist mehrteilig, damit weniger Stützmaterial benötigt wird. Neu (April 26): Längere Version für 56er Rahmengröße This model is multi-part, so less support material is needed. New (April 26): Longer version for 56cm frame size
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
NEW: Homing bump variant is now available! This model is made to fit into the standard key switches that come with the Voyager. It is definitely not as high quality as the ZSA caps. This will not allow light through it unless you print it…
❗ WARNING ❗: I made this mount in a way that it will grip the rubber base of a HomepodMini. When I was trying to remove my homepod from it for the first time, I though that I will ripp the rubber base off :D but I managed to disconect it…
Wydruk około 0,23 €–0,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dji Inspire 1 Mocowanie ramienia ruchomego do drona Ramię prawdopodobnie prawe z tego co pamiętam jeśli potrzebne lewe to wystarczy zrobić odbicie lustrzane. Pasuje wszystko jak do orginału.
Wydruk około 2,30 €–2,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Box designed for temporary rearing of caterpillars from stage 2 to stage 4 with leaves of the food plant.
Wydruk około 10,78 €–13,17 € nettoWstępna wycena jednego wariantu
Ersatzteile für ein Wohnmobil des Modells Ford Transit, Baujahr 2005. Es handelt sich um Abdeckkappen für die Außenspiegel und die Frontscheibenwischer. Translation: DeepL Spare parts for a Ford Transit motorhome, built in 2005. These are…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Dit is een klein houdertje waarmee je het HomeWizard schermpje kan ophangen aan de muur. V2 heeft een groter gat voor de kabel. Dit tiny bracket is voor hanging you HomeWizard screen that has no ways to hang it to anything. Version 2 has…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
I made my one printer box with some recycled materials. Printed in 0.2mm layer height, 20% filling with PLA+, without support except for the hinges The side plank have 10 mm of thickness and top/bottom plank have 20 mm of thickness. For…
The Concave Rhombic Dodecahedron is a novel version of the well known (convex) Rhombic Dodecahedron and inherits many of its amazing mathematical properties: Universal: One shape does it all, print as many as you want! Stable: The pieces…
Držák tachometru na kolo West biking
Wydruk około 0,58 €–0,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to fix the flash lamp on the top of the pillar of the gate and the support delivered was not adapted... so I designed and 3D printed one The original support is made to fix the lamp along the pillar or wall. If you want to it on…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Homemade flowerpot diameter 20 cm. PLA print, Gyroid filler 15%, layers 3. Legs PLA print, Gyroin filler density 40%, layers 3. Insert the legs into the bottom holes and secure with PLA glue. I wish you a pleasant printing.
Wydruk około 2,54 €–3,10 € nettoWstępna wycena jednego wariantu
On my window the support was broken. I made a spare part to make it functional again.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
This is a custom stand for the Apple HomePod Mini, designed with cutouts to fit the rubber 3M 9448A 8mm x 3mm Transparent Self Adhesive Mini Rubber Furniture Bumper Pads (from Amazon) for extra grip. The stand raises the speaker slightly…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
Simple Caravans & Motorhomes Hook-Up Lead adapter rain shield. Ours is connected to an outside socket, so hangs down, and in bad weather can fill with water (despite the factory rubber seal) and trip out the electrics. This modification…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
Seeed Studio ESP32C6 + HiLetgo MAX98357 + CQRobot Speaker Case Dimensions: Speaker - https://mans.io/item/cqrobot/cqrlb4o3w-b Amplifier - https://www.adafruit.com/product/3006 ESP32C6 - https://www.espboards.dev/esp32/xiao-esp32c6/ No…
Gehäuse für einen Batteriebetriebenen Homematic Aktor “Siehe Link” Meine Frau Ihre Deko bekommt so immer ein paar kleinen LED Ketten, mit Einbindung in das Smart Home Die 6 ist für eine leichte Identifizierung.
Wydruk około 0,82 €–1,01 € nettoWstępna wycena jednego wariantu
Two main bodies. Inner diameter of cap = 50mm Sensor centering ring (Nous E5). Cardboard for thermal insulation (Not necessarily required).
I got tired of my smart home sensor falling of the wall, so I designed my own wall-mount. I will add more pictures (and maybe drill-holes) after the first prototype print is ready.
(French follows) Lenz was the creator of this diode bridge for detecting the presence of trains on the rails. This home made model features both a case and a soldering aid for the 5 1N4001 diodes. The case is designed to be screwed…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Verlängerungs-Beine für die Lidle Truhe (LIVARNO home Sitzbank). Hebt die Truhe 60mm an, damit auch Schuhe drunter passen. Sollte mit möglichst viel Material gedruckt werden ! Werden gesteckt, passen saugend und lassen sich einfach wieder…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
This Project assumes that you already have a HomeAssistant server running! Hardware: Neopixel strip (WS2812B; 60 LED/m; 5V ) small wires Wemos D1 mini board (or any other small board that can run WLED) Power supply 2 x M3x5 screw…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I needed to disassemble a Deuta ENG 8/8 Tachometer used in a steam train for maintenance and cleaning, but the chassis is secured with special slotted security nuts. This model is a bit that can be used with standard bit holders (e.g.…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple modification of the existing MGN12 alignment tool that makes it a shim on the X rail. When setting up my Tapchanger, I wanted to use sensorless homing, but the shuttle by itself touches the X axis at a different location…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
My Homestuck collection is growing! This is the character Damara from Homestuck. To make this model you will also require 1 x paperclip. I'm particularly fond of this one, because it required a little problem solving. Damara has some very…
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
