Liczymy pasujące modele…
The controler has a manufacturing defect and cracks in the lower area, this case reinforces the controler and can be used on the already destroyed controler. Put the controler in the packaging, it's tight.
My garage door fob broke and couldn't feasibly be glued back together (again) so I made a 3D printed repair. 2024 edit: (Several people have asked me over the years if I also have the back part of case, or the switch. The answer is…
Remix of "Hormann HSE2-868-BS Repair" to fit a Hormann HSE4BS remote. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: Yes Resolution: 0,2 Infill: all perimeters Filament: eryone petg transparent Category: Replacement Parts
Remixed keychain case for the Hormann HSE4 remote control without screws. top lid is wit 2 or 4 buttons printed from PET-G or ASA
This bracket was created to hold a Hormann HS1 type door remote. It can be screwed to the wall using 3.5mm wood screws. This should also work for other Hormann HS remotes such as the HS2, HS4 and HS5 although as I don't have any of these…
Gate opener/remote holder for Hörmann HSE 4 BS or similar. different mounting adapters with hight adjustment
Print files for Hormann remote control HSE 1 BS, HSE 2 BS a HSE 4 BS. Print from Flex ot TPU. For best results direct drive (no bowden - harder to print) Good cooling and dry ilament.
Ghorlectopod Silk Spider. The Gorlectopods are a species of large, spider-like creatures native to the planet Ghorman. They are significant due to their unique biological capability of producing a highly prized silk known as Ghorman twill…
Hello, I designed this Hormann remote for replacement for the origional Hormann HSE2-868-BS. Searched on Thingiverse but not fount something that worked propperly for me. The only hardware u need is an M3 bolt with a treat of 8mm long.…
I added missing hole for LED light to Kleinkünstler's Hormann HSE4BS replacement Cover . Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 3 (or more so everything is a perimeter) Infill: all should be perimeters Supports: I…
These garage opener remotes are prone to breaK. This procect is to protect your remote and extend its life. Mine was already broken and this cased fixed my issue. Compatible with HSE2 and HSE4 too. I think BS variants are compatibletoo…
A loop for Hormann Remote Control Protective Sleeve (HSE4BS, HSE2-868-BS) such as Hormann HSE protective case by Jakub Kalfař or HORMANN Coque pour télécommande by nico206 . Print Settings Material: PLA Layer height: 0.2 mm Perimeters: 3…
Hormann ECN horns for use with standardised compression drivers
A front cap for Hormann Remote Control Protective Sleeve (HSE4BS, HSE2-868-BS). To be used with Hormann HSE protective case by Jakub Kalfař . I uploaded a STEP file so you can change the dimensions if your doesn't fit. It's important it…
Small remix to allow mounting a Shelly Blu adapter on the rail of a Hormann automatic garage door. I've made sure it sucks out a bit at one side, so that the driving train of the door can still pass the sensor. In combination with a…
Simple holder for a hormann remote control.
A cover for Hormann garage door opener remote control, which had the bottom keyring part broken off. The other file is a dummy remote control unit.
Ron Burgandy - 2004 3D printable model.
A spacer that goes between this loop and the body of the remote. It is to be used with Hormann HSE protective case by Jakub Kalfař or HORMANN Coque pour télécommande by nico206 . Glue it to the loop so it's easier to assemble. I uploaded…
Bracket is to hold an old-school Hormann HS type remote control. It can be sticked to the wall with some adhesive tape
Buttons for Hormann HSE4BS remote control. Use it with original body or with Hormann HSE4BS replacement cover by Hologos . I uploaded a STEP file so you can change it if you want. Print Settings Material: PLA Layer height: 0.2 mm…
Obal na dálkový ovladač garážových vrat
Model Siren. Requested by @jnprinting. Singular horn only. You can do the mount just using glue
This is for the Hormann micro keyfob transmitter case style HSE2. I figured I don’t need to always carry the garage door remote around with me along with my keys. I’d rather leave it in the car – which is where I am when I use it, after…
Náhradní kryt dálkového ovladače Hormann čtyř tlačítkový.
I designed 3 models based of an original HSM4 remote holder. Model 1 removes the screw hole and clip clamp providing a flat surface to stick the holder against any surface using double sided tape. Model 2 is an “exact” replica of the…
I designed this model for installing reed switch on my Hormann garage door. You just add nut and bolt and install the 2 parts on garage door rod which is already pre-drilled. (look at provided photo) Print with PETG or PLA. Print Settings…
I missed haptic feedback on @Qwerty's case, so I've added it. Two buttons only.
Cover case for Hormann sensor with sliding cover for permanent opening function. Model se sestává ze tří částí, které je třeba složit. Tiskl jsem na PLA, ale možná je lepší použít PETG.
Wall mount for Hormann remote. Suited for HS BS series (HS2-868-BS, HS4-868-BS, HS5-868-BS).
https://www.amazon.com/gp/product/B0GR4JKC4X/ref=ox_sc_act_image_2?smid=A1NR50YASSZD11&th=1 use these speakers 1/2 inch pipe and 1/2 inch pipe clamp. also you can print as many as you want and stack em up.
Držák na ovladač vrat pro přilepení oboustranou páskou k palubní desce automobilu.
Hormann Pro Matic 3 remote case Print with supports, button can be shrinked to 95% on Z axis to be more loose. There is a hole, that You can use to insert translucent filament for LED.
The part exhibits a point of weakness at the intersection of the two faces, creating a potential fracture point. I rectified this by joining the two faces; it is now significantly stronger (La pièce présente une fragilité à l'intersection…
