Wyniki wyszukiwania: hui

Outils Filtre a Huile Ducati

Outils pour facilité le démontage des filtre a huile Ducati

Boite pour 2 petites bouteilles huile doTERRA

Impression simple et rapide.

Elfa Shelf Hangers for Vincent Groenhuis Auto Rewind Spool Holder for MMU Setup

Printed in PETG. 0.4mm nozzle. 0.2mm layer height. I whipped up some hangers that fit perfectly on the .25" in front bar of the Elfa shelving I have in my office.

Huina Excavator Buckets (Reg, Sand, Trench)

This is Erdinger's bucket remixed for the Huina Excavator (1550 / 550 / 580) Weights less than the metal bucket which is a nice bonus. Is plenty strong even for the servo-screw modified rigs. Sand Bucket now available (larger, no teeth)…

Stand for Huion Kamvas 13 Tablet

A stand for the huion Kamvas 13 graphics tablet. 25 degree angle for relaxed working. The pen can also be stored on it when not in use. Printed in Abs, Pla / Petg are certainly also fine.

FS tipo "F" met remmershuis - Spoor 1 - 1:32

I have added the brakeman's compartment to my my previous version of the FS tipo "F" ( https://www.printables.com/model/181876-fs-carro-merci-tipo-f-ghkkms-spoor-1-spur-1-gauge- ) This one is constructed identically.

Huina 1550 / 580 Ripper

Ripper for the Huina 1550 / 550 Excavator Needs (3x) M2x8 screws for the pads OR use it without pads for easier ripping in hard ground V2 corrects a clearance issue with my Spring Coupler ( https://www.thingiverse.com/thing:3732951 )…

dummy 13 Macuahuitl

a weapon base on an aztec Macuahuitl

schuifmaat klepje, battery caliper cover, soupape à étrier coulissant, válvula de pinza deslizante.

Na het proberen van de cover van 4D_printer heb ik er zelf 1tje getekend. Mijn schuifmaat heeft een andere vorm. After trying the cover of 4d_Printer I drew one myself. My caliper has a different shape.

Feng Shui Chinese Coin

A simple coin with a square cut in the middle. Designed to represent a traditional chinese coin. It is 2.6cm in diameter and 0.32cm in height. Has rised edges only on one side so that it prints easier. If you want it to be rised on both…

Huina Excavator Blade

This is a blade/plow for my 3D printed Huina Undercarriage Needs a N20 geared motor with M4x55 thread, about 200 rpm for best torque Requires my complete Undercarriage, will not fit the stock one !…

Pen Holder for Huion Kamvas 13

This is a form fitting, very simple pen holder for the Huion Kamvas 13 drawing tablet/screen. There is always an unused usb port that now can be utilised as a pen holder. The design is made to be form fitting and hard to fall out and the…

Huina 550 / 1550 Undercarriage

Huina 550 / 1550 Undercarriage Spring tensioner Bearing rollers More ground clearance under the center section (about 30mm instead of 8mm stock) Fits stock Huina track gearboxes (a little plastic snipping required only) Fits stock Huina…

Efteling - Huis van de Vijf Zintuigen

The slicer will show a bottom plate, this should not be printed.

Remix - Portable Monitor Stand/Feet - Drawing Tablet Huion Kamvas 13

Simple monitor stand for displays which are up to 13mm thick. Tested with the drawing tablet Huion Kamvas 13.

WIND CHIME « Feng Shui »

Update 02/06/2026 : Someone pointed out to me that the pendants might twist, meaning the textured part would no longer be on the outside. That’s absolutely right, so a solution was needed. - The pendants have been modified by adding a…

Huina 550 / 1550 / 580 Spring Coupler Remix

Spring-loaded coupler compatible with the Huina 550 / 1550 or 580 V5 has more clearance added for the bucket, lock and bolts parts. Shouldn't need much filing/sanding. Also added a bevel to make hooking a bucket easier. If V4 worked fine…

Mechuiti, Demon Lord of Cannibal Apes

Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…

Splitshuisje voor rekenen groep 3

Splitshuisje voor het leren splitsen tijdens de rekenles voor leerlingen van groep 3, eind groep 4 in het reguliere onderwijs. Gooi 10 blokjes of balletjes etc in de schoorsteen van het splitshuisje en ze komen verdeeld in twee vakken van…

Villa volta huis EFTELING 1

Villa volta house from the Efteling (dutch theme park) 1

Huion Kamvas 16 Vesa Mount Adapter

Huion Kamvas 16 Vesa Mount Adapter. I got inspired by this reddit post to create this model to avoid having to buy a metal adapter. I wanted to mount the tablet to a monitor arm for ease of repositioning when not in use, but couldn't find…

Huina 1550 Progressive Link Thumb

Huina 1550 Progressive Link Thumb Your choice of : Short : Use without a quick coupler or for a shorter thumb Long : Use with the quick coupler Not compatible with stock square drive Not compatible with stock remote Not compatible with…

Huina 1550 Cabin Grill

Cabin Bars / Grill / Protector for Huina 1550 Either print in 8 parts (print_7 and print_1) or the complete thing. Glue together the 8 parts then double-side sticky tape the grill to the cabin. V2 fixes a tolerance issue around the bottom…

Huina 1550 Upgraded Bucket Push Rods

Bucket push rods for your Huina 1550 This allows more angle of the bucket if used in addition to my other mod here : https://www.thingiverse.com/thing:3723652 Print one of each part except (2x) horizontal_v1 The cylinder_spacer is made to…

VAM Tads / Takkls huisvuilwagen in Spoor 1 / 1:32 / 45 mm

Dit is mijn interpretatie van de VAM Tads (later Takkds) huisvuilwagen in Spoor 1 / 1:32 / 45 mm. De VAM heeft deze wagens ingezet voor het transport van huisvuil naar Wijster en Nuenen. ( https://nl.wikipedia.org/wiki/VAM ) Er is er…

Huina 1550 "5 Finger" Rake

Huina 1550 excavator "5 finger" rake. REQUIRES my quick coupler OR the screw-cylinder mod. There is no square hole in this to drive it from the stock bucket motor ! Requires (1x) M4x45 bolt and nut to make the front attachment pins. The…

Cloche filtre à huile BMW e46 moteur n42 (86mm 16 pans)

Bonjour, Voici la cloche de 86 mm à 16 pans pour le démontage du filtre a huile sur BMW e46 équipée avec moteur N42B18A. Prévue pour clé dynamométrique avec carré de 12,5mm. Pièce conçue pour être solide Tolérance à 0,1mm Pas de support 5…

ELECROW 5 inch Touch Screen 2020 Extrusion Mount for OctoDash, OctoScreen, TouchUI, Ender 3

This design mounts an Elecrow 5 inch LCD Display-B to a 2020 profile extrusion. I created this for my Ender 3, but it should work with any printer that uses the same size extrusions. In addition to the printed parts you will need the…

Escultura 107 del Bosque de Las Estatuas (San Agustín-Huila-Colombia)

Escultura nº 107 de la colección del Bosque de las Estatuas en el Parque Arqueológico de San Agustín (Colombia). Modelo obtenido por fotogrametría el año 2013. Modelo generado con Meshroom y editado con Meshlab.

Huion Pen Tablet Stand

Huion Pen Tablet Stand. Design for Huion Inspiroy H640p Work in progress not finished but is working.

Oil Filler funnel / Entonnoir Huile moteur

Oil Filler funnel. Entonnoir Huile moteur. Pour Renault Clio 3 (à la base)

Holder for Graphic Pen (Huion, Wacom,...)

Holder for Graphic Pen (Huion, Wacom, …) Hey maker! 👋 A handy little helper for your graphics tablet. Features: Holds your 3D pen or stylus neatly. Stick it to the side of your tablet with double-sided tape. Keeps your workspace organized…

Huina 550 / 1550 / 580 Electric Coupler

Huina Excavator Electric Coupler * Use the 580_ labeled files for the 580 / 1580 v1 v2 v3 v4 UPDATE Someone made a printable lead screw version for use with "D-shaft" N20 motors. "Electric_LEAD_Lock.stl" "LEAD_Screw.stl" ! Thanks to m.…

Macuahuitl

El modelo mide aproximadamente 75 cm de largo, el cuerpo principal está dividido en 3 partes mas la agarradera y 10 piezas que simulan la obsidiana. No requiere soportes la impresión. Yo use pegamento de secado rápido para unir la piezas…

Huion Pen Holder

Small and simple holder that clips onto the 3 in 1 cable from a Huion pen display tablet should be able to fit most 3 in 1 cables that come with the Kamvas series

Huisseries H0 "Le Cyclope"

Il s'agit des huisseries du bar-restaurant "Le Cyclope" de la revue Clés pour le train miniature . J'explique tout de la mise en œuvre de cette maquette à découper dans cette vidéo :

Putin/Khuilo

Huina 1550 Quick Coupler (Kind Of)

Here is my first concept of a "quick coupler" for my new Huina 1550 :D This is for a stock Huina without mods ! For the moment, it is a manual coupler, meaning you have to remove 1 bolt to detach the bucket. You can make yourself a 3mm…

Welkom Niet storen schuifbordje

This is a sliding sign to indicate whether people may be disturbed or not disturbed in the Dutch language. Met dit schuifbordje kan men aangeven dat met niet gestoord kan/mag worden. Keuze tussen ‘ Welkom ’ en ‘ Niet storen ’ Filament:…

Hui Machine, whimmy diddle

By rubbing the small stick over the notches of the Hui Machine you can make the propeller rotate. If you know the trick, you can make the propeller turn left or right (each change of direction is accompanied by the exclamation "Hui!"). If…

Prusa i3 Mk3 top stands for Universal Auto-Rewind Spool Holder by VincentGroenhuis

Top stands for the new Universal Auto-Rewind Spool Holder by VincentGroenhuis to use with Prusa i3 Mk3. You only need to print the two stands, all the other pieces are used from the original design!. Feel free to make comments and…

Drawing Tablet Desk Stand (Intended for Huion H610X)

---- Description I created this stand because I found reaching over the keyboard to use my drawing tablet quite awkward. Having it towards me and above the keyboard allows me to easily reach the tablet. This is intended for a Huion H610X,…

[ChiShui] RedWaters - Magnetic Gunstock for Quest 2

21/11/2024 Changed angels on the right controller mount to make aiming easier ========================= This thing improved my accuracy quite a bit with rifles and such. Everything is printed with a 0.6mm nozzle with PETG, the spring…

schuifslot-sliding lock

Een gewoon schuifslot, ik heb er ook versie bij gedaan dat je kan sluiten met een veiligheidsspeld. De veiligheidspin kan je kopen in de ijzerwinkel. Ik heb ze niet afgedrukt. An ordinary slide lock, I also added a version that you can…

Reniflard d'huile Renault 4L

Reniflard d'huile renforcé pour Renault 4L avec carburateur Zenith 28IF. Ce design a été validé lors de l'édition 2023 du 4L Trophy avec un montage sur 4 véhicules différents sans casse. Cette pièce est à imprimer de préférence en résine…

Huina 1592 Grading/Snow bucket

Snow/grading bucket with the proper Huina 1592 pins. Either my first Huina print was wrong or they aren't universally set pins printed in black PETG and used during the winter. held up well.

coahuilaceratops

Dinosaur from Mexico

Huion Kamvas 16 (2021) VESA Mount

VESA 100 mounting bracket for a Huion Kamvas 16 (2021)

Side Mounted Pen Holder (HUION KAMVAS 22)

Have you ever took a break from shrimping over your art monitor, set down your pen, and leave your unattended Pen to be prayed upon by a curious kitty, only for it to be lost for an hour in some craves? No? well I have so I made this,…

Feng Shui Dragon Gift box

Feng Shui Dragon Gift box Clear acrylic knobs - https://amzn.to/42M7vzq With a layer height of .2mm, filament change for different color on the last two layers.

Tracks for Huina Bulldozer

Design: https://cad.onshape.com/documents/5ea1bad7d58eb133543db8f4/w/2911d5b373cc54b2ba982e76/e/c1821844de435ce1a8fc9415?renderMode=0&uiState=68b0c55711b99720e3533587

Lžíce Huina bagr

široka lžíce na Huina bagr 1/14

Enkappe für Kabelkanal Kleinhuis HKL2030

Einfach druckende Endkappe für den Kabelkanal. Wird mit der kleinen Nase einfach aufgesteckt.

Chinese characters decorations for good Feng Shui / Luck (發 and 庚)

Improve your house Feng Shui by adding some small good luck decorations. Print Chinese characters 發 or 庚 standing on a small base. Need printed supports!

Russian Ship Idi Nahui - Keychain

Cache batterie Huitric

réplique de batterie époque pour cacher une batterie 6n11a-1b

Case Huion Keydial mini (K20)

No glue needed for the cap of twister, it fits tight. If the printer diagonals are not adjusted, the lid and bottom may not fit. The model is designed without a margin for purpose of a tight closure.

Huion Kamvas Pro 16 (4K) holder with GoPro mount

I wanted a more flexible way to mount my Huion Kamvas Pro 16 (4K) when I use it as a monitor rather than drawing on it. To be able to use GoPro mounts felt like the obvious choice, as they are quite strong and versatile. The design is…

Huion Kamvas 16 Top Pen Holder

A pen holder for Huion Kamvas 16 on the top of the tablet. Print on the side to avoid supports. I mounted mine with a narrow piece of double-sided tape for non-permanent adhesion

Huion Inspiroy H1161 Pen Holder

The base that shipped with the tablet felt like it was undersized. The pen fell out of the base several times so I made a deeper one.

Coahuilasaurus

Kritosaurine from Late Cretaceous northern Mexico.

Mini flower / plant pot - Feng shui

Tiny and cute pot - 100% Feng shui Internal diameter of the pot : 62 mm Easy to print, no support required Material used: PLA white Layer height: 0.2 mm, fill in: 15%

Porte Huiles essentielles

Parce que j'en avais raz-le-bol de laisser trainer mes huiles partout donc voilà un support ventilé pour 15 huiles avec couvercle

Huion Kamvas 16 VESA Mount Adapter (dual size)

Expansion of the model by @sunny_raven_256664 - adding 75x75 VESA mount holes to the design

Huina 1520 1:18 scale excavator arms

Replacing arms for Huina 1520 1:18 toy excavator

Gridfinity 3x3 Ling Hui Universal Crystal Lift No. 3400

7HU Gridfinity holder for the Lingui 3400 crystal lift. This is the most common “cheap" crystal lift so if you bought it for around 20€/$ - this is most likely the correct one even if the name doesn't match.

Huion Pen Holder

Hi! It's my first project. Hope you like it and you find out this usefull. In my other thing you can find a Huion graphic tablet holder. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Infill: 20%…

4v or Lithuim battery holder combatible with Ryobi

4 x 8 holds up to 32 Ryobi 4v or Ryobi USB Lithium batteries 4 x 4 holds up to 16 Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 15% - Infill pattern Adaptive Cubic - 2…

Huion Kamvas 13 vertical stand

This is a simple yet sturdy vertical stand for the Huion Kamvas 13 gen 3 and it's included adjustable stand. It should help save space on your desk whilst keeping it away from cluttered drawers. it should also work for other tablet…

Feng Shui Lucky Beads

Beads in the style of a chinese feng shui lucky charm. They are different ways of saying wishes of longer life and good fortune. There are thin versions with a 5mm hole and thick versions with a 7mm hole. Even though there are overhangs…

spartamet/sachs throttle slide /gasschuif

a replacement throttle slide for a spartamet motorized bycicle with a sachs engine, slight amount of sanding is required

Pencil nib HUION

do the printing slowly and you decide if you do it with supports or not, do it standing still

Grip for tablet pen (Drawing tablet Huion)

Made a version for Huion drawing tablets since the original was too small for it

Clé filtre à huile

Voici ma création d'une clé pour filtre à huile 32mm. Utile pour plusieurs modèles VW / Audi récents. Impression en PETG, buse .4mm, 40% infill. J'ai trouvé un autre modèle par la suite: https://www.thingiverse.com/thing:4435549

Huisheng WM210 lathe chuck wrench bracket 20MM

Used to store heavy chuck wrenches that have nowhere to store and have fallen to the ground : ) Embedded magnets diameter 10mm height 7MM to 10X7

Battlebot beetle sneeuwschuiver

First proto of a frame that can carry 2 motors (m20), 2 batteries and a ESP8266+motordriver board. More info about the project: https://wiki.hackerspace-drenthe.nl/index.php/Projecten/Robotwars250g

Stylus stand for Huion Inspiroy H430P

There is no stand included, i made my own.

Pen Holder for Huion HS64

A remix of thing:5136887 by alantofu99 Category: Gadgets

Revised Coahuilaceratops

Ceratopsian from Northern Mexico

Huina 1592 1593 Larger Drive Sprocket

One tooth larger drive sprocket to compensate for track stretch. Also includes a taller tooth to prevent track slipping

Support Stand for Huion Tablet

The tablet is currently mounted on a monitor arm so its easy to move between use as a monitor and as a tablet. Because of where I have the monitor mounted it doesn't actually rest on the desk when pulled forward and lowered so I designed…

Huion Tablet Wall Mount

I purchased a Huion drawing tablet some while ago and always had a hard time finding a good place to put it when not in use. To solve this, I modeled up a quick wall mount system that is clean, functional, and minimal. The tablet…

Huion graphic tablet holder

Hello! This time I was trying to make a graphic holder under my monitor stand and I think it came out good. I hope it will be useful for you. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Infill: 20%…

Huina 1550 bucket sieve attachment

this bucket is so you can excavate in sand/water so sand/water will fall through leaving rocks/mud inside

Huion H610 Pro Digitising Tablet Pen cover

This is a cover for the Pen device that comes with Huion H610 Pro Digitising tablet. I transport mine around in a laptop bag and the Pen comes with no cover, the nib looks very sensitive and prone to breakage so this simple cover was…

Huion Pen Button Shroud

Simple replacement part for the button shroud on some huion pens. I don't know how mine broke or what happened to it, but it was gone - so I fixed it with this print :D I reccomend slow printing speed because of the small hook/locating…

Vormen schuiftoren/stapeltoren

Met deze vormen kunnen de kleuters op een speelse manier de verschillende vormen en kleuren ontdekken. Je kan de kleuters vrij laten stapelen of een opdrachtkaart laten namaken. Je oefent verschillende vaardigheden: fijne motoriek:…

Hasselt Huisnummer Houder - Address Number Holder

In my hometown Hasselt they introduced new address numbers. This is a holder for this number. Note: for mounting the lid you'll need M2 bolts More info: https://www.vvsnv.be/hasselt-reflecterende-huisnummers/…

Circuitsonline KifKit Ledlamp behuizing V2 (Enclosure for circuitsonline kifkit led light V2) with slide switch

De kunststof schuifschakelaar kan de bestaande drukschakelaar op de print ingedrukt houden zodat het lampje aan blijft. New version with slide switch, so the light can stay on continuously. No need to modify the PCB, the existing…

Bambulab Lithophane frame met schuine kant

Schuine kant in Bambulab lithopane frame aangebracht voor het aanbrengen van een ledstrip.

3D Printer behuizing

3D Printer behuizing

Rangement pour huiles essentielles

Plateau pour huiles essentielles pouvant s'empiler facilement

Hexboard Stylus Holder (for Huion H610)

Stylus holder, designed to fit into RostaP's honeycomb storage wall.

Boite huiles essentielles

Permet de ranger jusqu'à 6 flacons : Diamètre max : 30mm Hauteur max : 75 mm Dimensions extérieures la boîte (sans le couvercle) : Hauteur : 78 mm Largeur : 69 mm Longueur : 102 mm Couvercle : Hauteur : 12 mm Largeur : 75 mm Longueur :…

Stylus stand 45 degrees for Huion Inspiroy H430P

Used translator. Huion doesn't include a stylus stand, so I made my own.

Huion Stand Safety Stopper

A simple piece I made to add some safety to Huion ST200's bottom rest, or stopper as they call it. The tablet seemed to jump too easily out of it and it was getting me nervous. I glued a small piece of EVA over it but it is not mandatory.…

Pokémon Ether Äther Etere Huile – Storage Box

Check our my MakerWorld for more free models: https://makerworld.com/en/@mishirostudio Pokémon Ether Äther Etere Huile – Storage Box Store your Pokémon accessories in style with this Ether storage box ! Featuring a sliding lid that can be…

HUION GRAPHIC PAD H430P PEN HOLDER

Elevate your creative space with our Huion Graphic Pad H430P Pen Holder 3D model. Organize your workspace in style, ensuring your pen is always within reach. Add practicality and aesthetics to your setup, enhancing your artistic workflow.…

HUION PEN HOLDER

Huion Pen (PE330) holder attached to the Benq VW2430 monitor.

Huii - The Bridgeholder

Herumliegende Geräte nerven! Vor allem wenn sie dann auch noch Kabelsalat verursachen. Mit der "Huii - The Bridgeholder" Halterung könnt ihr, z.B. die Hue Bridge von Philips wunderbar mit einer Mehrfachsteckdose kombinieren. So habt ihr…