Counting matching models…
Na het proberen van de cover van 4D_printer heb ik er zelf 1tje getekend. Mijn schuifmaat heeft een andere vorm. After trying the cover of 4d_Printer I drew one myself. My caliper has a different shape.
Made a version for Huion drawing tablets since the original was too small for it
Printed in PETG. 0.4mm nozzle. 0.2mm layer height. I whipped up some hangers that fit perfectly on the .25" in front bar of the Elfa shelving I have in my office.
Ring voor mechanisme voor de schuifraam vergrendeling voor de Citroën Dyane.
Om dat mijn vorig klepje voor de schuifmaat wel sucses heeft dacht ik maak er ook nog een ander, voor een ander merk digitale schuifmaat. Groetjes Ludo. Comme ma précédente housse pour pied à coulisse a rencontré un franc succès, j'ai…
This is Erdinger's bucket remixed for the Huina Excavator (1550 / 550 / 580) Weights less than the metal bucket which is a nice bonus. Is plenty strong even for the servo-screw modified rigs. Sand Bucket now available (larger, no teeth)…
A stand for the huion Kamvas 13 graphics tablet. 25 degree angle for relaxed working. The pen can also be stored on it when not in use. Printed in Abs, Pla / Petg are certainly also fine.
I have added the brakeman's compartment to my my previous version of the FS tipo "F" ( https://www.printables.com/model/181876-fs-carro-merci-tipo-f-ghkkms-spoor-1-spur-1-gauge- ) This one is constructed identically.
Ripper for the Huina 1550 / 550 Excavator Needs (3x) M2x8 screws for the pads OR use it without pads for easier ripping in hard ground V2 corrects a clearance issue with my Spring Coupler ( https://www.thingiverse.com/thing:3732951 )…
a weapon base on an aztec Macuahuitl
A simple coin with a square cut in the middle. Designed to represent a traditional chinese coin. It is 2.6cm in diameter and 0.32cm in height. Has rised edges only on one side so that it prints easier. If you want it to be rised on both…
This is a form fitting, very simple pen holder for the Huion Kamvas 13 drawing tablet/screen. There is always an unused usb port that now can be utilised as a pen holder. The design is made to be form fitting and hard to fall out and the…
This is a blade/plow for my 3D printed Huina Undercarriage Needs a N20 geared motor with M4x55 thread, about 200 rpm for best torque Requires my complete Undercarriage, will not fit the stock one !…
Huina 550 / 1550 Undercarriage Spring tensioner Bearing rollers More ground clearance under the center section (about 30mm instead of 8mm stock) Fits stock Huina track gearboxes (a little plastic snipping required only) Fits stock Huina…
The slicer will show a bottom plate, this should not be printed.
Simple monitor stand for displays which are up to 13mm thick. Tested with the drawing tablet Huion Kamvas 13.
Update 02/06/2026 : Someone pointed out to me that the pendants might twist, meaning the textured part would no longer be on the outside. That’s absolutely right, so a solution was needed. - The pendants have been modified by adding a…
Spring-loaded coupler compatible with the Huina 550 / 1550 or 580 V5 has more clearance added for the bucket, lock and bolts parts. Shouldn't need much filing/sanding. Also added a bevel to make hooking a bucket easier. If V4 worked fine…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
Splitshuisje voor het leren splitsen tijdens de rekenles voor leerlingen van groep 3, eind groep 4 in het reguliere onderwijs. Gooi 10 blokjes of balletjes etc in de schoorsteen van het splitshuisje en ze komen verdeeld in twee vakken van…
Villa volta house from the Efteling (dutch theme park) 1
Huion Kamvas 16 Vesa Mount Adapter. I got inspired by this reddit post to create this model to avoid having to buy a metal adapter. I wanted to mount the tablet to a monitor arm for ease of repositioning when not in use, but couldn't find…
Huina 1550 Progressive Link Thumb Your choice of : Short : Use without a quick coupler or for a shorter thumb Long : Use with the quick coupler Not compatible with stock square drive Not compatible with stock remote Not compatible with…
Cabin Bars / Grill / Protector for Huina 1550 Either print in 8 parts (print_7 and print_1) or the complete thing. Glue together the 8 parts then double-side sticky tape the grill to the cabin. V2 fixes a tolerance issue around the bottom…
Bucket push rods for your Huina 1550 This allows more angle of the bucket if used in addition to my other mod here : https://www.thingiverse.com/thing:3723652 Print one of each part except (2x) horizontal_v1 The cylinder_spacer is made to…
Dit is mijn interpretatie van de VAM Tads (later Takkds) huisvuilwagen in Spoor 1 / 1:32 / 45 mm. De VAM heeft deze wagens ingezet voor het transport van huisvuil naar Wijster en Nuenen. ( https://nl.wikipedia.org/wiki/VAM ) Er is er…
Huina 1550 excavator "5 finger" rake. REQUIRES my quick coupler OR the screw-cylinder mod. There is no square hole in this to drive it from the stock bucket motor ! Requires (1x) M4x45 bolt and nut to make the front attachment pins. The…
Bonjour, Voici la cloche de 86 mm à 16 pans pour le démontage du filtre a huile sur BMW e46 équipée avec moteur N42B18A. Prévue pour clé dynamométrique avec carré de 12,5mm. Pièce conçue pour être solide Tolérance à 0,1mm Pas de support 5…
This design mounts an Elecrow 5 inch LCD Display-B to a 2020 profile extrusion. I created this for my Ender 3, but it should work with any printer that uses the same size extrusions. In addition to the printed parts you will need the…
Escultura nº 107 de la colección del Bosque de las Estatuas en el Parque Arqueológico de San Agustín (Colombia). Modelo obtenido por fotogrametría el año 2013. Modelo generado con Meshroom y editado con Meshlab.
Huion Pen Tablet Stand. Design for Huion Inspiroy H640p Work in progress not finished but is working.
Outils pour facilité le démontage des filtre a huile Ducati
Oil Filler funnel. Entonnoir Huile moteur. Pour Renault Clio 3 (à la base)
Holder for Graphic Pen (Huion, Wacom, …) Hey maker! 👋 A handy little helper for your graphics tablet. Features: Holds your 3D pen or stylus neatly. Stick it to the side of your tablet with double-sided tape. Keeps your workspace organized…
Huina Excavator Electric Coupler * Use the 580_ labeled files for the 580 / 1580 v1 v2 v3 v4 UPDATE Someone made a printable lead screw version for use with "D-shaft" N20 motors. "Electric_LEAD_Lock.stl" "LEAD_Screw.stl" ! Thanks to m.…
Small and simple holder that clips onto the 3 in 1 cable from a Huion pen display tablet should be able to fit most 3 in 1 cables that come with the Kamvas series
Il s'agit des huisseries du bar-restaurant "Le Cyclope" de la revue Clés pour le train miniature . J'explique tout de la mise en œuvre de cette maquette à découper dans cette vidéo :
The source marked this model as adult content.
Here is my first concept of a "quick coupler" for my new Huina 1550 :D This is for a stock Huina without mods ! For the moment, it is a manual coupler, meaning you have to remove 1 bolt to detach the bucket. You can make yourself a 3mm…
This is a sliding sign to indicate whether people may be disturbed or not disturbed in the Dutch language. Met dit schuifbordje kan men aangeven dat met niet gestoord kan/mag worden. Keuze tussen ‘ Welkom ’ en ‘ Niet storen ’ Filament:…
Top stands for the new Universal Auto-Rewind Spool Holder by VincentGroenhuis to use with Prusa i3 Mk3. You only need to print the two stands, all the other pieces are used from the original design!. Feel free to make comments and…
---- Description I created this stand because I found reaching over the keyboard to use my drawing tablet quite awkward. Having it towards me and above the keyboard allows me to easily reach the tablet. This is intended for a Huion H610X,…
21/11/2024 Changed angels on the right controller mount to make aiming easier ========================= This thing improved my accuracy quite a bit with rifles and such. Everything is printed with a 0.6mm nozzle with PETG, the spring…
Een gewoon schuifslot, ik heb er ook versie bij gedaan dat je kan sluiten met een veiligheidsspeld. De veiligheidspin kan je kopen in de ijzerwinkel. Ik heb ze niet afgedrukt. An ordinary slide lock, I also added a version that you can…
Reniflard d'huile renforcé pour Renault 4L avec carburateur Zenith 28IF. Ce design a été validé lors de l'édition 2023 du 4L Trophy avec un montage sur 4 véhicules différents sans casse. Cette pièce est à imprimer de préférence en résine…
Snow/grading bucket with the proper Huina 1592 pins. Either my first Huina print was wrong or they aren't universally set pins printed in black PETG and used during the winter. held up well.
VESA 100 mounting bracket for a Huion Kamvas 16 (2021)
Have you ever took a break from shrimping over your art monitor, set down your pen, and leave your unattended Pen to be prayed upon by a curious kitty, only for it to be lost for an hour in some craves? No? well I have so I made this,…
Feng Shui Dragon Gift box Clear acrylic knobs - https://amzn.to/42M7vzq With a layer height of .2mm, filament change for different color on the last two layers.
Design: https://cad.onshape.com/documents/5ea1bad7d58eb133543db8f4/w/2911d5b373cc54b2ba982e76/e/c1821844de435ce1a8fc9415?renderMode=0&uiState=68b0c55711b99720e3533587
Einfach druckende Endkappe für den Kabelkanal. Wird mit der kleinen Nase einfach aufgesteckt.
Improve your house Feng Shui by adding some small good luck decorations. Print Chinese characters 發 or 庚 standing on a small base. Need printed supports!
réplique de batterie époque pour cacher une batterie 6n11a-1b
No glue needed for the cap of twister, it fits tight. If the printer diagonals are not adjusted, the lid and bottom may not fit. The model is designed without a margin for purpose of a tight closure.
I wanted a more flexible way to mount my Huion Kamvas Pro 16 (4K) when I use it as a monitor rather than drawing on it. To be able to use GoPro mounts felt like the obvious choice, as they are quite strong and versatile. The design is…
A pen holder for Huion Kamvas 16 on the top of the tablet. Print on the side to avoid supports. I mounted mine with a narrow piece of double-sided tape for non-permanent adhesion
The base that shipped with the tablet felt like it was undersized. The pen fell out of the base several times so I made a deeper one.
Kritosaurine from Late Cretaceous northern Mexico.
Tiny and cute pot - 100% Feng shui Internal diameter of the pot : 62 mm Easy to print, no support required Material used: PLA white Layer height: 0.2 mm, fill in: 15%
Parce que j'en avais raz-le-bol de laisser trainer mes huiles partout donc voilà un support ventilé pour 15 huiles avec couvercle
Expansion of the model by @sunny_raven_256664 - adding 75x75 VESA mount holes to the design
Replacing arms for Huina 1520 1:18 toy excavator
Impression simple et rapide.
7HU Gridfinity holder for the Lingui 3400 crystal lift. This is the most common “cheap" crystal lift so if you bought it for around 20€/$ - this is most likely the correct one even if the name doesn't match.
Hi! It's my first project. Hope you like it and you find out this usefull. In my other thing you can find a Huion graphic tablet holder. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Infill: 20%…
4 x 8 holds up to 32 Ryobi 4v or Ryobi USB Lithium batteries 4 x 4 holds up to 16 Suggested print settings: - 0.20mm QUALITY - PETG (pictured using OVERTURE PETG Grass Green ) - Infill density 15% - Infill pattern Adaptive Cubic - 2…
This is a simple yet sturdy vertical stand for the Huion Kamvas 13 gen 3 and it's included adjustable stand. It should help save space on your desk whilst keeping it away from cluttered drawers. it should also work for other tablet…
a replacement throttle slide for a spartamet motorized bycicle with a sachs engine, slight amount of sanding is required
do the printing slowly and you decide if you do it with supports or not, do it standing still
Beads in the style of a chinese feng shui lucky charm. They are different ways of saying wishes of longer life and good fortune. There are thin versions with a 5mm hole and thick versions with a 7mm hole. Even though there are overhangs…
Voici ma création d'une clé pour filtre à huile 32mm. Utile pour plusieurs modèles VW / Audi récents. Impression en PETG, buse .4mm, 40% infill. J'ai trouvé un autre modèle par la suite: https://www.thingiverse.com/thing:4435549
Used to store heavy chuck wrenches that have nowhere to store and have fallen to the ground : ) Embedded magnets diameter 10mm height 7MM to 10X7
First proto of a frame that can carry 2 motors (m20), 2 batteries and a ESP8266+motordriver board. More info about the project: https://wiki.hackerspace-drenthe.nl/index.php/Projecten/Robotwars250g
There is no stand included, i made my own.
A remix of thing:5136887 by alantofu99 Category: Gadgets
Ceratopsian from Northern Mexico
One tooth larger drive sprocket to compensate for track stretch. Also includes a taller tooth to prevent track slipping
The tablet is currently mounted on a monitor arm so its easy to move between use as a monitor and as a tablet. Because of where I have the monitor mounted it doesn't actually rest on the desk when pulled forward and lowered so I designed…
I purchased a Huion drawing tablet some while ago and always had a hard time finding a good place to put it when not in use. To solve this, I modeled up a quick wall mount system that is clean, functional, and minimal. The tablet…
Hello! This time I was trying to make a graphic holder under my monitor stand and I think it came out good. I hope it will be useful for you. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Infill: 20%…
this bucket is so you can excavate in sand/water so sand/water will fall through leaving rocks/mud inside
This is a cover for the Pen device that comes with Huion H610 Pro Digitising tablet. I transport mine around in a laptop bag and the Pen comes with no cover, the nib looks very sensitive and prone to breakage so this simple cover was…
Simple replacement part for the button shroud on some huion pens. I don't know how mine broke or what happened to it, but it was gone - so I fixed it with this print :D I reccomend slow printing speed because of the small hook/locating…
Met deze vormen kunnen de kleuters op een speelse manier de verschillende vormen en kleuren ontdekken. Je kan de kleuters vrij laten stapelen of een opdrachtkaart laten namaken. Je oefent verschillende vaardigheden: fijne motoriek:…
In my hometown Hasselt they introduced new address numbers. This is a holder for this number. Note: for mounting the lid you'll need M2 bolts More info: https://www.vvsnv.be/hasselt-reflecterende-huisnummers/…
De kunststof schuifschakelaar kan de bestaande drukschakelaar op de print ingedrukt houden zodat het lampje aan blijft. New version with slide switch, so the light can stay on continuously. No need to modify the PCB, the existing…
Schuine kant in Bambulab lithopane frame aangebracht voor het aanbrengen van een ledstrip.
Plateau pour huiles essentielles pouvant s'empiler facilement
Stylus holder, designed to fit into RostaP's honeycomb storage wall.
Permet de ranger jusqu'à 6 flacons : Diamètre max : 30mm Hauteur max : 75 mm Dimensions extérieures la boîte (sans le couvercle) : Hauteur : 78 mm Largeur : 69 mm Longueur : 102 mm Couvercle : Hauteur : 12 mm Largeur : 75 mm Longueur :…
Used translator. Huion doesn't include a stylus stand, so I made my own.
A simple piece I made to add some safety to Huion ST200's bottom rest, or stopper as they call it. The tablet seemed to jump too easily out of it and it was getting me nervous. I glued a small piece of EVA over it but it is not mandatory.…
Check our my MakerWorld for more free models: https://makerworld.com/en/@mishirostudio Pokémon Ether Äther Etere Huile – Storage Box Store your Pokémon accessories in style with this Ether storage box ! Featuring a sliding lid that can be…
Elevate your creative space with our Huion Graphic Pad H430P Pen Holder 3D model. Organize your workspace in style, ensuring your pen is always within reach. Add practicality and aesthetics to your setup, enhancing your artistic workflow.…
Huion Pen (PE330) holder attached to the Benq VW2430 monitor.
Herumliegende Geräte nerven! Vor allem wenn sie dann auch noch Kabelsalat verursachen. Mit der "Huii - The Bridgeholder" Halterung könnt ihr, z.B. die Hue Bridge von Philips wunderbar mit einer Mehrfachsteckdose kombinieren. So habt ihr…
![[ChiShui] RedWaters - Magnetic Gunstock for Quest 2](https://media.printables.com/media/prints/1071510/images/8169029_4449c9c1-051b-477c-a05d-e8b3ab7a5177_5becff2a-ea14-412e-821d-de758258fbdf/1732076214917.jpg)
