Liczymy pasujące modele…
Have you ever wanted, to use your own smart device, while working out at the fitness center? Portable... Easy to quickly put on and take off, without tools. Angled for correct eye alignment, to eliminate strain while viewing smart screen…
Iphone 16 Max Pro veroni style holder for the clicgear Golf Cart (3.5 and newer), This holder allows an IPhone 16 Max Pro with protective casing to be held above the handle bars of the golf cart. The holder can be rotated horizontally and…
Have you ever wanted, to use your own smart device, while working out at the fitness center? Portable... Easy to quickly put on and take off, without tools. Angled for correct eye alignment, to eliminate strain while viewing smart screen…
This Golf Ball holder is to be used in conjunction with the clicgear v3.5 and up golf cart connectors on the side of the golf cart handles to provide additional storage for golf balls, divot fixer, tees, and a ball marker. The bottom ball…
Modeled in FreeCAD as a replacement of original phone or GPS holder for Clicgear trolleys ( https://www.clicgear.com/accessories/gps-holder.php ). I use it together with iPhone 13 holder from this model:…
Replacement golf scorecard holder plus holds two pens for a V3 or V3.5+ version of the clicgear golf cart (that came originally with a stretch cord holder). This model also holds two golf ball markers (with 3mm diameter spikes) on wither…
Fits Clicgear and Rovic golf carts. Works best with cups/bottles that have a diameter of 77mm (~3") or larger, due to the way the arms expand to hold a drink securely. The cupholder that came with my cart (Clicgear model 4) is noted to be…
I bought the clicgear shoe brush with the hope that it'd fit my CaddyTek push cart . It didnt quite, so I created a mount for it to fit on my cart seat . Should fit the various Caddytek push carts that are compatible with their seat or…
The box can hold approximately 45g of silica gel. It has a locking mechanism to prevent the lid from falling off. To open, a fingernail or tool is needed to lift and remove the lid. Very important slicer setting I printed with PETG Wall…
8 Port X 10Gb Base-T Ports, NICGIGA 10Gbps Network Switch Required a frame to mount the Ethernet switch to a wall. The Size has Been Adjusted from original to Fit different Device. 182mm x 45mm Very Tight Fit, Just Force it. I printed on…
Coffee or cup gimbal for clicgear or rovic trundler clip-on attachment. I saw some other similar models but needed a smaller size (78mm or 86mm diameter cup grip) and all-in-one model with a more robust clip-on part so made this from…
A set of simple brackets to mount the NICGIGA S250802P switch upside down. Perfect for mounting under a desk, on a wall, or any other flat surface. This design reuses the original M3 screws that come with the switch's included metal rack…
Iphone 16 Max Pro veroni style holder for the clicgear Golf Cart (3.5 and newer), This holder allows an IPhone 16 Max Pro with protective casing to be held above the handle bars of the golf cart. The holder can be rotated horizontally and…
The switch runs pretty cool, but I've added plenty of ventilation so heat shouldn't be an issue. Print with the face of the rack on the build plate without supports. Layer heights and nozzle width shouldn't be an issue, I printed with a…
Large water bottle holder for clicgear (v3 to 4.5) golf push cart inspired by the v4.5 clicgear water bottle holder. This was designed for a 9cm diameter by 25cm tall water bottle ( YETI 18oz Rambler & Thermoflask ). Printing Tips…
Does not require any support. The emboss on the shelf part fits the switch wall-mount holes snugly and locks in with a small tongue -- requires a bit of force. A small dovetail-shaped rail on the side was intended to mount an optional PoE…
NICGIGA S25-0801 2.5GBE Network Switch OpenGrid mount. Re-uses the M3 threading on the switch. Print two for each side. Designed for M4 thread size.
ClicGear 3.5+ Clip for range finder holder, makes sure the range finder is the right height and available when you need it. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 80%…
Designed to fit on the Clicgear accessory tab, the Club Holder provides easy access to your favourite Club or putter. Instructions Once printed, you can fuse together the two pieces using a soldering iron at an appropriate temperature.…
This is version 3 and hopefully the final version of my Clicgear brake gear. Version 1 was modeled as closely as I could manage to the original from Clicgear. It proved to be too weak when 3D printed. I beefed up the cogs for version 2,…
Print, find a good place in the middle, mark and cut a few hexagons out to fit. Glue it with superglue.
precision pro ranger finder holder that clips on all clicgear golf carts. print upright and enjoy. intended for the left side of the cart for a right-hander, assuming the cart is on the left side of the ball when you go to read your…
a remixed outer ring for the gimbal from universal travel coffee gimal model. this fits most clicgear cart using its mounting pegs on the side of the cart. print on its back and it should print without any supports.
Golf Balls (3) and Tee (4) holder addon for clicgear v3.5 & v4 golf cart that can be hooked up to the handlebar on one of the existing unused clip holders. Testing Have been using this item for a full season (2023) and it did not break…
When playing golf I use a ClicGear cart. It has thee points to click addons to your cart. Most people have positions on their bags to hold some extra tees, but I haven't got them on my bag, so thought I should make one for on my golf cart…
When playing golf I use a ClicGear cart. It has thee points to click addons to your cart. I sometimes missed a hook to hang the buckut whith golfballs on So I made a hook you can click on the support buttons of the ClickGear cart Print…
I wanted to hang my golf trolley to the wall so I would have some more free floorspace in the shed. I designed the part so it doesn't need supports to print. You can mount this part with bolts/screws to the wall ø4mm-6mm 2 holes are ø8mm…
Similar to other clicgear accessories , this basket snaps onto the side knob on your cart. Its a convenient place to put your rangefinder if you are using the mesh basket for other things. The keyhole fit is pretty tight, depending on…
Water and brush holder for clicgear cart. Fits standard squeeze bottle. Printed in petg. I used 0.4 nozzle and 0.3 mm layer height but it shouldn't matter. No supports.
A much better drink holder to replace the really crappy one that comes with the cart. This is a mash up of some other peoples files. I made the model a long time ago and no longer know where i got the original files. The photo is of petg.…
Best printed with flexible filament, 45D or softer. No support needed. Adjust infill and number of layers according the material you are using so you get the desired flexibility.
Rack mount for cheap 2.5GbE switches with 1 SFP+ port. Use one of the models from the original model to fill in the other side. This includes a backstop and block to hold the power cable. These 2 features require support, but no other…
Print in place, supports are needed, tree supports work perfectly well.
Printed in 0.2mm PETG for extra strength. This model is better than V1, due to the aligning of the layers to the biggest force.
This is a wall bracket for the NICGIGA Smart 9 port Network Switch. This print does not fit on my AnyCubic Mega S and I have split the file into two parts to print. I have however included the original files should you wish to print it as…
I keep loosing the end clip so I made one that can be cable tied into place. Printed in PETG and been using it for 6 months with no problems. Includes Fusion 360 Model
Matching rack ears for 10 inch racks 20% infill, 5 perimeters
A golf ball mount attached to a golf cart, allowing easy access to golf balls while on the course. Printed on a FLSUN V400 0.4mm nozzle PETG preferable PCTG 255 degrees Celcius nozzle 60 degrees Celcius bed
Print in PetG for optimal strength and flexibilityy to accomodate all ball movement in and output. I used 3 perimeters. Happy printing and happy golfing!
A mounting system for IKEA Skadis pegboard and a Mokerlink/Horaco/Nicgiga switch. switch dimensions are 190mm x 100mm x 28mm Designed for vertical mounting and reversible. Just mount bottom cap, insert switch then use top cap to lock into…
