Liczymy pasujące modele…
Happy to present my TR-590 Mk X tricorder kit! Update 1/28/24 - Added versions of the Body with built-in support feet that you can break off with pliers afterwards. They firmly hold the corners and edges down to prevent curling up. You…
Here is a remix of the awesome Original Series tricorder designed by Wythkyn . It was reworked to assemble easier and look closer to the original prop. The parts all connect with notches and cutouts to align everything. The black parts…
Here is my take on the tricorder featured on the later seasons of Star Trek: The Next Generation. It has the option of being a standard science tricorder and can be converted to a medical tricorder using magnets to swap parts. Update log…
Happy to present my version of the TR 560 Mk VI Tricorder as seen on the first season of Star Trek TNG. This early style featured a small hand scanner that tucked away at the top, includes a medical tricorder module with its own stow-away…
Here's my version of the tricorder prop seen in Star Trek: Nemesis. It was a fairly simple prop design that featured a large LCD display screen and a flip-up sensor lid. The lid uses a 6x2mm magnet to hold it closed. To connect the lid to…
Here is my version of the SNW tricorder. It features a flip-down display and removable hand scanner. It's a lot of parts but easy to print and assemble. Uses 5x5mm magnets to hold the hand scanner and the door closed. The 6x2 just didn't…
2026.01.13 - Moved github links to codeberg. 2024.01.17 - Adafruit has a replacement for the main arduino board now. No code changes will be required, as the only change is to the accelerometer. The codeberg code doesn't use the…
My need was to automatically water up to 10 plants per raised bed. The commercial Gardena Micordrip lends itself very well to this, but it is relatively expensive and the philosophy is a ring-shaped distribution of water. However, I…
***NEW v2 with better printing and HD graphics now available here: https://www.printables.com/model/1516164-star-trek-voyager-relativity-tricorder-v2 Here is my take on the 29th century tricorder from the Star Trek: Voyager episode…
This s a remix of the awesome Original Series tricorder by UnimatrixRed I changed the width between the frame edges to match a picture that I saw of the original being measured by The Wand Company for their soon to be released Tricorder.…
Here is my take on Phlox's scanner from Enterprise. Haven't printed this out yet, but the tolerances should be ok. Use supports with a tight separation clearance to get nicer looking underside one the Black Stripe and Bottom parts. Update…
A simple "twist" lens cap for Rolleiflexes and Rolleicords with "Bay 1" mount. I made a couple of versions with film reminders (100, 125, 200, 400, 800, 1600 and 3200) as well as a plain one without numbers…
This is a replica of the TR-560 Tricorder VI from Star Trek: The Next Generation. It prints in place, only requiring supports between the hinge segments, & folds closed neatly. (I'd recommend printing it in a different color than pink,…
I printed these parts a few dozen times and made changes along the way to make the parts print right / prettier / consistent / match my assembly preferences. No stl files here, print using the 3mf file. All the mods were done using…
Attempted to improve the 29th century Relativity tricorder model. I was motivated by the constant breaking of the original version's lid which led me to making some upgrades for durability and appearance. The new version of the lid works…
A modified version of the Star Trek Tricorder with print in place hinges. The Tricorder was hollowed out to be used as a container or dice box. Print on side.
The remixed faceplate from the remix did not seem to fit the bezels/knobs. I fired up TinkerCad and made them fit. I included the OBJ zip file if that helps anyone.
A simple "twist" lens cap for Rolleicord V. Note! For an updated model that should work for all Bay 1 cameras, follow the link below: https://www.printables.com/model/499657-rolleiflexrolleicord-bay-1-lens-cap…
Keeps the strap neat and tidy for days in-between landing party adventures.
Based on a question about making a prop stand for the Original Series Tricorder I decided to move this one up in my work queue. The stand should be centered on the Tricoder prop width wise. There will be some of the prop that hangs over…
Keep the filter on and place this lens cap on to protect it. Suitable for TLR Bayonet 1, Aires reflex, Rolleicord, Rolleiflex and others. Filament: PETG Which one to print? From left to right: Lenscap for Rolleiflex with bay 1 filter on,…
The cold shoe also doubles as a loop for a neck strap. just slide it over the round strap lug and though the flat strap loop. It should have a tight fit.
The Rolleicord V (1955) is a great companion and I use it often, but it lacks a cold shoe that can hold a light meter or a small flash. This became quite evident when the Reveni Labs light meter arrived, so I made one suitable to hold the…
This was my first go at making a easier to print tricorder to match Lambtor's Arduino Tricorder project. A more complete version is here: https://www.printables.com/model/225964-printability-remix-of-arduino-tricorder -------------- No…
Use a thicker double sided tape to fasten on the metal exposure table on the back of the camera.
Hello :) This is a little friction-fit lens cap I designed for my old Rolleicord II (first version with Triotar 3.5 lens, I don't know if it will fit others). It holds mainly on the taking lens and has little legs not to twist away from…
Here's my updated version 2 of the Endgame tricorder posted on Thingiverse a long time ago. The v1 was tricky to make with the tolerances being too tight and the .png graphics needing to be fine-tuned to fit. This v2 features options for…
This model is designed for convention goers who want the general look of having a tricorder on their shoulder as opposed to a camera quality reproduction of one. The style is a blend between the shoulder-carried tricoders of Spock and…
Version 2 – Lens Cap for TLR (Bayonet 1) with Mounted Filter With this design you can keep your filter on and simply place the lens cap over it to protect your TLR lens. Compatible with TLR Bayonet 1 (Aires Reflex, Rolleicord, Rolleiflex…
While working on a v2 of the arduino tricorder, I figured it'd be good to have a holster for it when it's complete. Dimensions of the v2 are going to be the same as v1. This expects an 80mm x 40mm tricorder, with the door facing outward.…
This is a construction manual for making a Tricorder Bag from faux leather. Also included are files for various buttons and other extras I used to construct my bag. Includes the round buttons for the interface, the wide buttons for the…
I don't actually know what this thing is, I just wanted it for when I eventually printed out a 560. This model uses 6 6x2 magnets to attach it to the slot of the Medical Scanner and to hold the Cortical Stimulator in the slot.
Hai mai desiderato un modo originale per esporre e condividere i tuoi scatti più belli? Con SprocketMag , le tue foto stampate Bluetooth con la HP Sprocket (o qualsiasi stampante formato 2" x 3" - 50mm x 76mm) diventano mini quadri…
Wanted to display my Tricorder on the wall, so i designed this mount to do this. I have secured it with command strips but you can add screw holes pretty easily for a more permanent solution. All the real work has been done by directive0…
If you're one of the 5 people that 1) uses a Goerz Minicord, 2) has the 40 exposure cassettes for it and 3) also owns a 3D printer, congratulations, today's your lucky day! Prints without support, large flat face towards bed, the grip…
Uploaded so some kind redditors can debug an issue
Ein kleines Standdisplay für einen medzinisches Tricorder aus Star Trek The Next Generation. Estellt für das Playmate Spielzeug von 1997. A small display stand for a medical tricorder from Star Trek: The Next Generation . Designed for the…
I don't actually know what this thing is, I just wanted it for when I eventually printed out a 560. This model uses 6 6x2 magnets to attach it to the slot of the Medical Scanner and to hold the Cortical Stimulator in the slot.
Keep the filter on and place this lens cap on to protect it. Suitable for TLR Bayonet 1, Aires reflex, Rolleicord, Rolleiflex and others. Filament: PETG Which one to print? From left to right: Lenscap for Rolleiflex with bay 1 filter on,…
