Liczymy pasujące modele…
Designed in fusion 360. Supports will be required for the holder only. Recommend using tree like supports. No multi material system is needed. Single color printers, for holder add a pause at layer 32 to change color of raised curved…
Metric Hardware Demophage A Basic Fileset of a Demophage with metric hardware. Other than Conversion i made following changes: Using AR Style Grip I suggest not using a Nut for The Back of the plunger but catchier catch would accomodate…
Mounts the SonicPad to the Honey Comb Wall
UPDATE F16 ICP i realized to play BMS. It function together the MFDs with an arduino AVR family like keyboard emulator. I tes it on Leonardo and the new uno r4. Inside the aruino file there are comment about variabiles,pins ecc however…
Designed in fusion 360. Supports will be required for the holder only. Recommend using tree like supports. No multi material system is needed. Single color printers, for holder add a pause at layer 32 to change color of raised curved…
After building the TWP with 6x6x9 microswitches, I wanted to redesign the ICP along the same lines, using the microswitch's central pin as a support for the button itself, backlighting with LEDs, and using a 2.54-pitch multi-hole…
The injection mold was created as part of a recycling project. The aim was to recycle 3D printing waste, misprints, and old or no longer needed prototypes. To do this, the material was sorted by type and shredded in a homemade shredder.…
Metric Hardware Demophage A Basic Fileset of a Demophage with metric hardware. Other than Conversion i made following changes: Using AR Style Grip I suggest not using a Nut for The Back of the plunger but catchier catch would accomodate…
3x4 gridfinity for the NicPro 11 Pack Carpenter Pencil Set. Carbide Scribe/Center punch not included in model, I will be including those in a bin dedicated to marking.
Since I like my Pica pencil with the holder, I wanted the same concept for my NicPro Mechanical Carpenter Pencils. There are two versions. Clip Sheath - This design has a sheath for the pencil clip to slide into. It is sightly longer than…
Profiles 0.2mm Speed and Gereric PLA are unmodified, just like they come from the slicer . PrusaSlicer Version ist shown in the pic section, as a screenshot. Greetings to the world !
This is my custom sonicpad mount that i have been using for almost a year now was one of my first designs in onshape. Printed with PETG but no reason why PLA+ wont work. Its super sturdy Slides in and out of its connector with ease. And…
I wanted to use an RCelectricparts 3530-8 1400 brushless motor, but needed to shorten the spline and adjust the motor bracket. I transferred to Freecad, and modified. Freecad files attached. I kept the 2-part spline as the original, but…
Simple holder to attach the Creality SonicPad to the gantry of the Sovol SV06 plus. Assembly: The left mount will be attached to the 20x40 aluminium profile using two M5x12 panhead screws (mind the gap between the profile and x-axis…
This simple acousticpanel holder with a diameter of 80 or 150mm. You don't need any screws. It's a tight fit. My panel has wooden studs that are 30mm wide and the spacing between them is 11mm.
This is a Mount for the Sonic Pad to be mounted on the Top Right of the Modular Enclosure by Blast Modular Enclosure von Blast | Kostenloses STL-Modell herunterladen | Printables.com . It was printed in PETG
Came across this post on reddit , where a user created a custom PCB with the following sensors : Sensirion AG SHT-40-AD1B Temperature and Humidity. Sensirion AG SGP41-D-R4 NOx and VOC. TDK ICP-10111 Barometric pressure and temperature.…
Top rail mount for any Ender3 style 2020 Bed slinger. Mounts either Creality Sonic Pad OR Waveshare 5" IPS Touch screen and RPI (Mounted to back): https://www.waveshare.com/5inch-dsi-lcd.htm Includes drop in mounts for Creality runout…
I was replacing my lightwaverf 2-gang automated light switch with the Aqara S1+ Magicpad. I already a neutral in the box but the wall box is a UK 2 Gang Box and not quite as deep as required in the Aqara S1+. This mounting frame screws…
UPDATE F16 ICP i realized to play BMS. It function together the MFDs with an arduino AVR family like keyboard emulator. I tes it on Leonardo and the new uno r4. Inside the aruino file there are comment about variabiles,pins ecc however…
Suporte SONICIPAD para sensor impressora ENDER 3 V3 SE. Recomendações: Utilizar filamento PETG ou PLA, utilização de ABS somente para quem domina a prática de imprimir em ABS, nas impressoras abertas. Na utilização de ABS, é obrigatório o…
I purchased a bunch of Luminea TH-Sensors which a great but require a cloud solution for normal operation. They are built similar to a Tuya BTH-01 TH-sensor, for which a custom firmware for Tuya devices on the PHY622x2 chipset is…
PLAY IT SAFE WITH A PREMIUM FAN COVER THAT KEEPS YOUR CHILDREN’S FINGERS FROM BECOMING PART OF THE EXTRUDER FAN’S DIET. WHO NEEDS FILAMENT FLYING OFF LIKE A ROCKET INTO YOUR FAN? I KNOW YOU DON’T, SO FOR THE LOW, LOW PRICE OF FREE NINETY…
Der Halter ist für 13mm und 20mm Spaltmaß ausgelegt. Ich habe ihn aus PETG gedruckt ohne Supports. Einfach einsetzen mit erhöhtem Haken und diesen anschließend nach unten drehen. Jetzt hällt der Halter fest in der Wand und ein Bild oder…
Cache-pot minimaliste et robuste, conçu pour l’impression 3D, idéal pour plantes d’intérieur diamètre intérieur : 12.5cm
After building the TWP with 6x6x9 microswitches, I wanted to redesign the ICP along the same lines, using the microswitch's central pin as a support for the button itself, backlighting with LEDs, and using a 2.54-pitch multi-hole…
The injection mold was created as part of a recycling project. The aim was to recycle 3D printing waste, misprints, and old or no longer needed prototypes. To do this, the material was sorted by type and shredded in a homemade shredder.…
The y-endstop PCB on the magicphoenix (MPX) Voron 2.4r2 kit hits the umbilical cord and prevents the umbilical mount on the gantry from sitting flush and secure. A lot of folks use sensorless homing so the y-endstop is not needed.…
3x4 gridfinity for the NicPro 11 Pack Carpenter Pencil Set. Carbide Scribe/Center punch not included in model, I will be including those in a bin dedicated to marking.
A minor remix of Tache's NicPro Carpenter Pencil Holder Sheath. All that was done was to extend the tip length by 7mm. I like to keep sharpened pencils ready to go. Tache's version, with the pencil I have, didn't have any extra room at…
Isane Clown Posse, Hatchet Man Stencil Print instructions Unassociated tags: insane clown posse, whoop whoop Category: Art Tools
I needed a wall mount for the toothbrush base charger. Added counter sunk screw holes and a cable guide
Another new cleaner for the garlic press. Since there wasn't a model that fit my garlic press, I designed a custom part for this model. de: Noch ein neuer Reiniger für die Knoblauchpresse. Da es kein passendes Modell für meine…
This is like the other octahedral test except the octahedra are not joined face to face but point to point. Category: 3D Printing Tests
This is designed for destructive testing to judge the strength of the structure. Category: 3D Printing Tests
This is an open framework formed from tetrahedra. It is intended for destructive testing to show the strength and failure modes for this design. Category: Art
This is another test print intended for destructive testing. Category: 3D Printing Tests
This is another model for the Hydraulic Press Channel on YouTube. These are tested in a press with a load cell to determine the strength of the print. Category: 3D Printing Tests
This is similar to Eero Saarinen's Arch monument in St. Louis. Category: 3D Printing Tests
This was created for the Hydraulic Press Channel episode "Which is The Strongest Shape? Hydraulic Press Test!" Unfortunately, they were inundated with models and closed the competition. This is a tetrahedron that is 100mm in height. It…
Work In Progress, F-16C Block 50, ICP (UFC for us old school DCS peeps) All buttons fit best @ 97% scale, though some are slightly loose Text on buttons is too small for a 0.04mm print head Added 2 backplates, "Thicker" version worked…
Update: This case was featured on Tiny Yellow Machine, a show about the Playdate. The issue they had was that the power cable would push the Playdate upwards, so I fixed that issue. Next version should have pins that keep the Playdate…
My most practical model so far It uses Bic Cristal Pen, and you can mount your phone, an action camera or light when you are in a video conference, taking pictures of a product or something like that. You can slightly adjust the angle by…
Creality Sonic Pad G-Sensor for CR Touch or BLTouch Mount for Ender 3S1 or Upgraded SpriteExtuder upgraded Ender3v2. Y-axis zero offset. Prove offset: x_offset: 40 y_offset: 0 Links: JST 1.25mm both female 5pin cable:…
This is an exhaust stack for the nnicP39 foam board build RC airplane. 2 needed Category: R/C Vehicles
MagnetSize: φ6mm height: 2.5mm (for japanese: セリアの超強力マグネットミニ8P が適合) Pause printing before top-cover, put in magnet.
New version! QtQwiicCliq ("cutie quick click") improves almost every aspect of this design, and adds a stud-based mounting option for faster prototyping. Over the years I have accrued a moderately large collection of Sparkfun Qwiic and…
Hi, I'm building an enclosure for my printer and I don't like the view of cables laying everywhere so I though I'm going to hide all of them. This is a first part from many. This is also my first post and published model. If anybody have…
Replacement volume/select knob for the Freecom MusicPal (or for your own project ;-)). Fits on a regular encoder d-shaft. Print instructions Category: Replacement Parts Summary Replacement volume/select knob for the Freecom MusicPal (or…
My own version of the popular model used to test out printing tolerances, surface quality and to tune up your slicing profiles for every filament change. This 20mm calibration cube has almost everything you need to check before actually…
I wanted to make a stand for the SonicPad that wasn't on the side. The ideal position for me would have been central so as not to take up any more space. I have seen other supports that provide for the top mounting of the Ender S1 3 PRO…
The infamous Riddlebox! Only a true juggalo will enjoy this! lol 3MF is from orca using a bambu lab P1. Use it as you wish! Or drag files into your slicer and color as you wish! Scale to the size you desire and keep it at 1mm thick with…
typical 2d stuff that I enjoy! The Great Milenko! Drag the files or 3mf into your slicer (I use orca) and color as wanted and size as needed! keep overall thickness at 1mm as usual. Enjoy!
Support Skadis pour le Sonic Pad Avec assez d'espacement pour brancher à l'arrière les ports USB et le câble d'alim. Je l'ai réalisé avec trois parois . Le remplissage 15% en nid d'abeille sans couches du dessus ni du dessous.
My 4 Year Old Granddaughter is convinced I can fix anything; so, I didn't want to disapoint her when she came to me, with tears in her eyes, telling me her toy Helicopter (actually it was her dads when he was little) had a broken main…
In order to use the Klipper firm through the Sonic Pad on the Creality Ender-3 V3 SE printer and the vibration sensor for vibration compensation, you need parts to connect the sensor. This data is a guide case file for connecting a…
1 piece simple model. Attach to cabinet with 2 wood screw. I printed vertically with brim enabled no support using PLA+ fast Once started printing with higher temp it made sense to put the tab outside cabinet when in use. So i made…
3D print a GPS tour guide that you can build to make a geocaching music player. When we get to a location, it’ll display an image on screen and playback music or audio clips. This uses the Adafruit HalloWing and Ultimate GPS FeatherWing.…
After a while the SonicPoint wireless access point mounting tabs seem to go brittle and break (at least in my experience), this model does not use the original mounting tabs but securely clips around the WAP instead. Clearances and…
Addon for the HyperbolicParaboloid Cody18_1496478's HyperbolicParaboloid Printed with 0.6 Nozzle and 0.3 LH, scaled to 150%
Modified to be with flat top and compatible with M3x10mm bolts and nuts. Print as on pic. No supports needed.
Stand for F-16 ICP by Flight Forge. The stand can be secured with (4) M3 X 6mm bolts
This is an enclosure for Wondom's ICP5 DSP programmer PCB. It exposes the USB-C port and the two square connectors. The two parts are held together by (4) #3 3/4inch screws. M2.5 20mm screws should work as well, but I have not tried them.
Modified the Holder to fit my wireless charging puck from a Anker
Since I like my Pica pencil with the holder, I wanted the same concept for my NicPro Mechanical Carpenter Pencils. There are two versions. Clip Sheath - This design has a sheath for the pencil clip to slide into. It is sightly longer than…
Ein Halter für den mitgelieferten Schaber. Zur Befestigung an den originalen Displayhaltepunkten, wenn man den Drucker mit dem SonicPad/Klipper nutzt. Passend mit den Serien-Displayschrauben. Kann mit längeren Schrauben auch mit dem…
Material PLA or PETG Layer 0,2mm No supports needed
