70 modeli
I wanted a dead simple top mount for my Sturdy Bunny v2 ERCF without using any 2020 extrusion. Taking inspiration from jeoje's Sturdy Handles I made two platforms that mount to the frame using a single M5 roll-in nut and M5x10 bolt.…
For my use case, I needed a stand with a steep angle to see the floor in one of my rooms. It fits really snug, so depending on your printer and settings you might have to experiment with the step file a bit.
Inclined Base for the Eureka Mignon Series The Stand is tilted forward by 9deg to decrease retention just like the new Eureka Mignon Single Dose Grinder. It precisely fits on a Prusa i3 MK3S (with skirts turned off) The front is designed…
Inclined Pedestal for Busts Elevate your miniatures to their full glory with this inclined pedestal. Print or decorate it to suit your preferences. Pedestal Dimensions: Width: 3 x 3 cm (excluding decoration) Height: 7 cm Rod Diameter: 3mm
For this lifter, the shape was created that uses as little plastic as possible without losing strength. There are also two areas where non-slip material can be inserted if needed. If you print this, please leave a like or share a make!
This cylindrical timer rolls down the inclined plane very slowly, at a rate of 20cm per minute. It is inspired by traditional Inclined Plane Clocks and is very similar to the popular clock mechanism Tourbillon , except that in this case,…
Fan duct for the E3D V6 hotend Print instructions Category: 3D Printer Extruders Summary Fan duct for the E3D V6 hotend
Simple Inclined Desk Organizer
Parametric Tapo C210 inclined wall mount. You can change the inclination angle in the spreadsheet. I printed it in PLA with 4 wall loops and supports for critical regions only.
Expobar Brewtus Tamper station E61 for inclined portafilter UPDATE: Added a bottom and tamper holder in version 2 This is a tamper station for the original portafilter that is coming as standard for the Expobar Brewtus series of espresso…
Model in the photo is different. The stl I provided does not have the heart extruded from the surface but is hollow on both sides.
My drawers are not too deep (70mm) and CNC milling bits do not fit the drawer if stored vertically. Also, some of my bit boxes are 14mm wide, and do not fit most of the holders. This tray holds milling bits inclined, and long bits fit my…
The idea comes from Habony Norbert. This is my version of a filament guide. Ideal if the spool is on the left or right side of the printer. It is plugged into the modified Z-top of the MK4/MK3. The angle can be infinitely adjusted by…
This model is compatible with the lego system.
The model presents the behavior of a double cone on an inclined plane. Let's drop a tube down an inclined plane. It will roll down. It's no wonder. Now let's place a double cone at the bottom of the inclined plane. The lump will go…
I printed mine in PLA, 0.2 mm height, 20% infill, 3 walls (4 or 5 would be better). I also made improvements to make it stepless, minor improvements or adaptions to the funnel and anti-popcorn lid. Consider also printing: Stepless…
This is a first batch of my remix of Extrutim's Kurzgesagt bird fridge magnet models. The difference being that these can not be printed as separate parts and glued together, so multimaterial capabilities are a must. I have made parts…
This model is based on a maze of mysterious origins located in Chartres, France (and maybe a few other places across Europe). I made it small enough to accommodate a small BB sized bead. This one prints without supports in your resin or…
Three-piece stand that angles your Eureka Mignon coffee grinder 15° forward. Print in any material, PLA may deform with time but has held up for years for me in this application. Use four M3 screws and nuts to attach the feet to the base.…
My father-in-law asked me if I could make him a slightly inclined support and a rain visor for his Video Intercom System
Remix of stand model by konseben. Added a hole for screw, so I can mount it to the ceiling.
PrinterBox with the original Prusa LCD screen inclined https://www.printer-box.com/ only print these part, and screw the original prusa LCD.
Two of my kids have this drawing tablet (https://www.amazon.com/gp/product/B07GNK18VJ/) but it lays flat to the desk, which isn't great for drawing on or using as an extra monitor. One of my kids requested a 20-degree incline for it so I…
For cultivating mushrooms by pouring an agar medium inside and sterilizing it. These are so-called "slants". Sample photos are from ordinary PLA. The final version will be made of HTPLA or Nylon - it must survive 121 degrees of Celsius…
I modified the original Heater Stand for PTC Heater design by @indymusician_238719 because my PTC heater measured 80x80mm and I wanted to keep it slightly tilted to direct the heat more towards the center of my Original Prusa Enclosure.…
A simple block model showing inclined bedding. It has a removable core for stimulating additional discussions during the class. We use them in our GEOL101 labs and Geological Field Techniques classes. This is one of eight models used by…
Handy door handle inclined for an egnonomic operability. Nozzle 0.4mm and layer height is 0.2. Use 3 perimeters.
Modification du guide-filament “quick connect” de Printer Box qui permet d'incliner le tube PTFE pour réduire la friction lorsque le Spool Tank est posé sur l'imprimante et surélevé (par exemple grâce à ces pieds intercalaires (…
A simple block model showing a sinistral fault. It has a removable core for stimulating additional discussions during the class. We use them in our GEOL101 labs and Geological Field Techniques classes. This is one of eight models used by…
Need to organize your spray cans with style? This inclined spray can holder is the perfect solution for your workspace, garage, or workshop! Designed with both intelligence and modernity, it provides easy and immediate access to your…
L-track inclined at 45°, held by M6 screws from below. I use this model to secure bags in a van. Printed in PET-G with 3 walls and a giroïd filling, it seems solid enough for my needs, you be the judge ;) To be printed face down, with…
Pad under the Akuvox communicator series E16 with a slope from the wall. Divided into two parts, due to the possibility of printing on small printers such as the Prusa MINI.
A weighless,printable remote cum pen cum phone holder.
I was having trouble finding a simple bookstand that could hold my books slightly inclined since they can't fit straight on my shelf. So I made this. Warnings and tips : • I made this for my tiny space, consider measuring where you want…
cat water bowl holder inclined at 10 degrees, diameter 10 cm
The Inclined Salamander Positioning Device (ISPD) is a 3-D printed device designed to assist with the collection of sperm from axolotls and has potential uses for other salamander species. This device could also be applied to veterinary…
Inclined bracket to control the printer display positioned on the left side of a desk
The motivation was to make a dingle ball which will not so freely roll on a floor which is inclined for drainage, such as in a basement, a porch, or sanitary facility. This room was built for washdown, and I just got sick of all the…
made this because I use calculators a lot and didn't want to crane my neck every time I needed to look at it so here we are.
Enhance your DJ experience with this 15° inclined stand designed specifically for the DJControl Mix ! Made of 8 easy-to-assemble pieces, it provides perfect stability while securely holding your device, even during intense use. The design…
Wallholder for IKEA Samla Box (tilted at 23 degrees) 11L (39x28x14 cm) 22L (39x28x28 cm) other sizes not tested yet Material PLA, PETG Layer height ≤0,3 mm Infill 15% Walls 4 or more Support None. The model was designed not to require any…
Design Concept The Duplo top inclined adapter is designed to enhance the playability of Duplo bricks, providing an inclined surface for added creativity in building setups. Unfortunately, the length of the pins had to be adjusted in this…
Inglês: Tilted Wall Mount for Parkside X12V Batteries (all capacities: 2Ah, 4Ah). The part allows easy insertion/removal of the battery (tilt design enables effortless insertion/removal) The battery stays secure via tabs without forcing,…
base for 1:43 car model Toyota Yaris WRC
After a year of skateboarding, my lights continue to dazzle others, which is why I created these simple but effective brackets with an 8° angle. Remixes are allowed and appreciated, for any suggestions do not hesitate. His models were…
My drawers are just 90mm deep, while some bits are almost 100mm, and can't be stored vertically. This bins allow storing milling bits inclined, so that it fits vertical constraint. There are 3 bin sizes available: 1x2 for 6 bits 2x2 for…
Inlay for a Grafitrax Base. This one is good for catching flying or falling balls, that tend to hit their target with a certain spread width. So in combination with a Trampoline (e.g. https://www.printables.com/make/3072806 ), Cannon (…
This is a simple make I just designed to use the beam on top of my bed, and organize my books in a different way. Just holding by some wood sticks in between the supports. The sticks are 5mm diameter.
Now your Iphone can stay on its side while wireless charging even without a "MagSafe" case!
Hook for hanging small objects inclined decoration.
This sponge drying rack is designed to be attached to the underside of a roof inclined at 52°. A .f3d file is also attached, so you can modify the angle or other aspects of the model. To be sufficiently stable, it should be printed using…
Podložka pro držák okapu Marley RG 70 (starší typ bez pacek do strany - viz fotka). Optimalizováno pro sklon 15°, ale je možné použít dobře pro sklony střechy resp. krokví 12 - 18°. Samotnou podložku aby nepadala, je možné uchytit 1-2…
I build and sell ham radio antennas and I needed a good way to display them at my booth at Dayton Hamvention -- so I designed this. There are three pieces -- the base, the support, and the lip. The lip is optional, it just makes it look a…
Clothing rack for an inclined roof. Easy for a couple of clothes. Be aware: nothing too heavy. T-shits, shirts, pants, sweaters... that's no problem. But full winter jackets are to heavy. The Fusion360 file is also available if you would…
This works with an Anker wireless charger that is 90 mm in diameter and 7 mm in thickness.
Angled rosette, top angle 58 degrees, with a 25.1mm x 25.1mm hole for a 25mm x 25mm profile. Butterfly/book-like layout, with a hook. Very simple and quick to print.
made this because I use calculators a lot and didn't want to crane my neck every time I needed to look at it so here we are.
Inglês: Tilted Wall Mount for Parkside X12V Batteries (all capacities: 2Ah, 4Ah). The part allows easy insertion/removal of the battery (tilt design enables effortless insertion/removal) The battery stays secure via tabs without forcing,…
I modified the original Heater Stand for PTC Heater design by @indymusician_238719 because my PTC heater measured 80x80mm and I wanted to keep it slightly tilted to direct the heat more towards the center of my Original Prusa Enclosure.…
This is a soap holder which holds a single soap bar in a more or less inclined position. The soap bar can dry, and excessive moisture is retained in the bottom of the soap holder.
Hold any sizes of remote,phones,pens.Stopper is placed to avoid slip,holder with cut extrude makes weightless.
This is a headset support mounted on an inclined wall. It is easily reachable on my workbench and also space saving.
Inclined stand for the SONOFF SNZB-03 zigbee motion sensor. Printed in PLA with 0.2 mm quality. Simply fasten it with a wall screw through the hole provided, the sensor fits inside from the top and remains secure, allowing it to be…
You need to print one of the clips. I provided three sized. One of them should snap fit. Both tiles to half a tile up on one end, which helps to accelerate the marble again.
I needed something to hold my pens and pencil in front of me and because I have a 3 monitor configuration and thee's not much room left on the desk. I designed this specifically to fit under the monitors. Print it with the back laying on…
Simple tablet wall mount with 100x100mm footprint for smaller tablets. Wall mount uses two screws and the tablet holder simply slides on it from the top. You can either use double sided tape or Velcro to mount the tablet. 3mf for Bambu…
Print in vase mode with transparent filament. You can print the objects upside down to switch the orientation of the inclined surfaces from up to down. The coosen filament (color, transparency), the LED (color, intensity) and the ambient…
5 Slots to display and organize your cards of any sort (business, credit, transport, etc.). Neatly spaced with a stable base. Make sure to flip the model base flat to the surface before printing. NOT FOR COMMERCIAL USE ALL RIGHTS RESERVED ©
