697 modeli
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 9,39 €–11,48 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 6,99 €–8,55 € nettoWstępna wycena jednego wariantu
Here is a link to the shock absorbers for which this replacement part was designed. https://vi.aliexpress.com/item/1005004599082114.html?spm=a2g0o.order_detail.order_detail_item.7.1b34f19cOyW5Rm&gatewayAdapt=glo2vnm printing: perimeter -…
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
85 mm keychain
Wydruk około 0,78 €–0,96 € nettoWstępna wycena jednego wariantu
https://www.facebook.com/solarastronomy.sk/posts/pfbid02UChmo7Kn5aebKzN6yFr7Lqps8LwheNVhBdjHqouLqvWqM8ifqkxXx6Pce5QfcoeZl
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a custom-designed motor and transmission mount made specifically for the Injora 370 motor with integrated transmission . The mount was designed for RC crawler and custom RC projects where a secure, clean mounting solution is…
Wydruk około 4,82 €–5,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Finger diameter at base is 17 mm. Scale a model so that it suits your needs! High Quality OBJ - mm
Majoras Mask HD from The Legend of Zelda printed in different parts
This is a multicolour remix of the Majora's Mask model by WeeMadSausage on Thingiverse. We've also made a wall-mount that holds the mask up through the eyeholes. For the full colour version, you will need a printer that can print a…
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
Haven't been able to find a .3mf for Bambu. Took a while to color, its not perfect but it is close.
If you like this project, take a moment to buy me a virtual coffee … If you are interested in other content like this, contact us in chat. Follow us and contact us for other requests:
Nike Air Jordan IV pen holder remixed from benben0115 model This is a remix from https://www.thingiverse.com/thing:398515 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.12 Infill: 20%…
Please click if you appreciate my work :) Remix Nike Air Jordan by @vitalij_90303
El diseño se baso en uno ya existente, pero le hice ciertas modificaciones como el agujero de la zapatilla fue tapado + el agarre es distinto a otros vistos. Y otra cosa que me comentaron que estaría bueno que aclare es que el diseño es…
Nike Air Jordan IV pen holder remixed from benben0115 model Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: generic PLA PLA White Category: Office
Jordan keychain. print with pauses or in multiple prints. (or with dual extruders) https://www.instagram.com/geobaire/
I made a copy of one of my plastic pipe instruments to try the result, it works quite well so I share the result with you! I made a video about this project : The first version is a fully 3d printed 3 parts flute, you have to glue the…
I spent several hours coloring the model for multi color print and decided to share it.
🇯🇴 مرحبا بكم في البتراء Welcome to Petra! Petra (Arabic: البتراء, Al-Batrāʾ; Ancient Greek: Πέτρα), originally known to the Nabataeans as Raqmu, is a historical and archaeological city in southern Jordan. The city is famous for its…
The Legend of Zelda: Majora's Mask The widest section of the inner dimensions of the hollowed out side of the mask is slightly larger than the average mans face. If you have a large head you may need to enlarge it which would require you…
2 Versions included- One has a hole in the bottom to allow for tree supports on build plate only. Scale to any size. Max Mini Size shown above. Normal size below: Powered by Image-to-3D from MakerWorld…
Closed version of the Jordan shoe so it can be printed as a solid with infill.
iCiao a tutti! Data l'ultima challenge sul modello delle Air Jordan ho pensato di creare una lampada remix. Ecco poche semplice istruzioni per montarlo. STEP 0. Cosa ci serve??? Innanzitutto direi di partire da tutto l'occorrente per…
There is a version without embedded magnet spots and one with. (!) If you want to embed magnets, make sure you look up how to add a pause during the slicing process. This varies by slicer. (!) The current design is for cylindrical…
Simple wall decoration. A place is provided at the back for wall mounting with a screw head. You can also use this model with an interior lighting, the passage of a cable for the power supply is provided. For printing: The model is too…
I was scrolling through the ‘Finger toy’ competition when I saw that the most downloaded model competing was a Jordan finger toy so I went to check it out and download it. I soon realized a few things firstly it needs a brim and lots of…
Air Jordan VI als Modell gedacht, aber auch als Stiftehalter möglich. Zum drucken mit PLA gedacht, Stützstruktur nötig.
Hey, this is a free model from thingiverse that I painted in bambu studios for the bambu series of printers. It turned out really well. I hope you like it! Follow me on Tiktok! @newton00073
Consists of 2 different objects, which have multiple version. Jormungandr braid coil Two model version, varying in degrees of twist and tilt of head. Printed vertically 2 layer raft for bed adhesion and support of first layers. Does not…
I made this awesome Nike Air Jordan shoekeychain. Use AMS. Enjoy! For commercial use. If you make a ton of money with it we are super happy for you, but also think about us. You can donate some to our account on paypal…
Air Jordan 1 model I scanned. Tested several prints at 4cm length. Came out pretty good. Trying to further refine the 3D
Added a cutout to the mask so the master sword (or other item) can be inserted. I tweaked this to function as a hair pin Category: Fashion
This is a Snapmaker U1 profile for a remix of Majora’s Mask, designed specifically for 4 color toolchanger printers like the Snapmaker U1. The original remix placed multiple models on the same plates, which resulted in excessive filament…
Important Update Note: I made this model early on with very little experience. Two people have now reported having issues with this model, and it's very possible that this model has problems. I don’t want you to waste your filament……
Update June 18 2023: I moved the lanyard lugs to the sides, which should make the bird call dangle better when worn as a necklace. This is a set of whistles tuned to the first five notes of a G or F Major scale. It is designed for use as…
First I have to give credit to Synthetic Electron 3D for the original concept and design. He really did most of the work! This mod re-uses the stock 'auxiliary' cooling fan, blowing through the flat horizontal blower in the rear of the…
End Caps for Open V-Slot 2020 with Open Hardware logo. This is a remix from https://www.thingiverse.com/thing:398515 Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.12 Infill: 20%…
Resolution: 0.2 Infill: 10% Cubic Filament brand: Sunlu Filament color: Burly Wood Filament material: PLA+ Printed with tree supports everywhere and after printing the left hand side I used support blockers to reduce the number of trees!…
The sole has been modified for a better shoe print. You will already find a pair of shoes in the model . The shoes are adapted to insert the toe. I recommend using supports . A pair of shoes created. I wish you a beautiful print !
I designed this as a wall mounting bracket to hold a set of 4 Jorgensen f clamps. The slot that the clamp sits in follows the curve of the clamp so it can't fall out. I have it set up on a French Cleat wall but it can be mounted directly…
Major League Baseball / MLB logo in 3D. 5mm high.
This super stylish Jordan keychain will make its owner even more cool on the streets. I did some tests and the best results I got were using a layer height between 0.12 and 0.16 mm. I recommend using that special filament stored in the…
Ever since I got my Snapmaker U1 delivered, I have wanted to print the four-colour Majora's Mask model. However, I wasn't quite happy with the painting or the high wall thickness (a remnant of the model being intended as a keychain). One…
A helmet that was never included in the Tommy Trojan/Drum Major Lego kit. You'll also wanna print a sword, cuz it didn't have one of those included either! https://www.printables.com/model/248800-tommy-trojan-lego-sword Two files: 1.)…
Bajoran Phaser Prop Designed to print with no supports but a brim. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: No Resolution: 0.12 Infill: 20% Filament: Sunlu PLA Grey Category: Props
A snap-in case for the little Bjorn. Designed to be as petite as possible while not compromising on case integrity. The parts fit snuggly, however, it is relatively easy to disassemble the case if needed. The case also features vents for…
Rosa per Sant Jordi, Sant Valentí o el dia que més convingui.
A small Air Jordan logo with a small hole on the top for threading a loop or a keyring. I found PLA to be strong enough for this build. Adjust the size in your slicer. I printed them 8cm for christmas decorations and 5-6cm for keyring.
Skull Kid wearing the Majora's mask, or vice versa depending on your perspective. This mini is approximately 38mm scale.
High poly model of Skull Kid from The Legend of Zelda: Majora’s Mask. Needs supports. If you like this, give it a like and follow me, because I make Zelda models all the time.
print with 100% infill, no supports
Inner and outer knobs for TC Electronic G-Major 1 and Triple-C devices. Possibly to fit other devices from TC. Inner knob has clearance versions. Every 3D printer has different possibility about precision, so I created clearance files…
Hal Jordan Ring Green lantern size 11, i tried to make it as faithful as possible for my self Print it with resin for the best outcome
The Emerald Knight, now in plastic! This is my Green Lantern variant of the Dummy13 figure by soozafone I used the 2x Muscled arm for dummy13 and the Hunky variant Note, all of my Dummy 13 models are printed at 150% and I doubt you'd be…
A small toy with the shape of a jordan nike sneaker YOU NEED TO AJUST IT TO YOUR FINGERS
This is my attempt at Majora's mask from The Legend of Zelda: Majora's Mask game. You'll need to mirror all 5 of the spikes, they go 1-5 from bottom to top. To get a wood grain texture use a rotary tool to gouge out small lines or use a…
Can be used as pen holder, decoration
If you like this project, take a moment to buy me a virtual coffee … If you are interested in other content like this, contact us in chat. Follow us and contact us for other requests:
This model widens one side of the spool ring adapter to stabilize a 3DHOJOR 1kg 199x62mm cardboard spool while it rotates within a Bambu Lab AMS. Features: Reusable 3DHOJOR nameplate for easy identification when reusing Instructions:…
Nike Air Jordan ORIGINAL COLOR 1984 Blu
He creado esta Rosa para poder regalar en san Valentín o en Sant Jordi, con un diseño fino y elegante con el que poder sorprender a esa persona que desea. En el mismo archivo tenéis 4 modelos diferentes en los que elegir el escrito del…
Dummy 13 Air Jordan 1 shoes supports depend on your printer Enjoy!
I was able to remix this version for compatibility with the INDX 8 tool variant and it is already painted! For those that are curious, this was PLA. These are the colors that I used (links are not affiliates in any way): Polymaker Pro…
Some Changes I made while creating this model are. Originally I had a different reference photo original, the reason that I changed it is because of the quality. It would have been harder to trace the lines so I found one that was more…
modelo de patas arácnidas para tu amigo y vecino spider-dummy.
no bean brairont es les puidre la mante
PPE Majora's mask based of the Legend of Zelda Majora's Mask. Half face / mempo style mask
a kay chain inspired by the Jordan logo
This is a custom servo mount remixed to fit a Injora 4-link high clearance links. Print with infill 100% or 99 bottom layers. Also orientate so the part so printing is upside down for clean fit with diff. link to servo i used…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Pro Black Transmission Distance: 0.3 PLA+ Creality Red Transmission Distance: 2.8 PLA+ Inland Egyptian Blue Transmission Distance:…
Here's a Bajoran Militia communicator badge for your DS9 collection. Uses 6x2mm magnets. Display stand included. Printing Tips - Printing it flat works fine, but if you are particular about the surface finish here are some tips I used for…
Dříve tento model byl jako klíčenka ale pak jsem ho předělal na vystavění např: na poličku
Llavero del logo Jumpman.
This is a 3pc sign that can be placed on a self or desk. Printing this in 3pcs eliminates the need for supports which makes it a very quick print. I used super glue to make sure the logo and the frame stayed together. I printed everything…
This model will enable the creation of a holder for Jorgenson style F-clamps. (Harbor Freight clamps will also fit. By combining a left end section, a right end section and an appropriate number of center sections, holders with variable…
My entry into Major Hardware's Fan Show Down S5. I’ve redesigned basically everything except the “base-plate”. I thought it’d be fun to make a new version for MH's new testing rig. This version is using a NASA inspired Low Speed…
apply scaling and use fine printing to maximize the level of details
Jordan 1 Silhouette I designed for a friend
I found this game to be a hassle to set up from bags, and wanted an insert for it which made this faster and easier. The ones that are out so far aren't filling the whole box, and even though it can be made smaller, I wanted mine to fill…
Print your own jordans 3mf file and stl
Just a simple Cookie Cutter of the character Jordi from The Secret World of Santa Claus / Weihnachtsmann und Co KG. If you want to support me creating new models, please consider buying me a coffee .
Kingroon KP3S Printed with 0.4 nozzle, layers 0.2mm, 100% infill. Filament PLA BASICO fron Ctrol 3D in several colours. Yellow thick 2mm, black 1mm and white 0.8mm. Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%.…
This is a model based on Torbjorn's Turret from the massively popular Overwatch game. It has been scaled to sit at 50cm height. Pieces have been sliced down to fit most 3d printers but if they are still to large, you can use tools like…
I've been working on a permanent display case for Bjorn for my own network. This is the second iteration, with multiple models melded together.. Thought I’d share to see what people think or if anyone has feedback. Couldn't find many…
Print two parts with own settings and stick it with super glue.
I created (2) different types of the Sergeant Major rank in order to choose from a plain and flat star to a 3D version star at the center. When printing the 3D star, labelled "SgtMaj V2", the below perimeters worked best for me on all of…
As I don't like rubber bands, I looked for an alternative solution for this.
You can scale it up however you want
