35 modeli
This is my take for the insulation and mount plates for the Mellow Fly MiniAB or BigTreeTech Piggyback36 boards. There are two models available, one which the stepper mount holes sits horizontally, typically for Sherpa Mini, and other in…
Just a quick modification of an existing design to add extra length on the strain relief to enable it to be used for the Nitehawk36
Insulation plate and standoffs for Bigtreetech Piggyback36, for extruders like Orbiter, Sherpa ect. https://paypal.me/radicalreel Use heat inserts for the standoffs The 1mm gap between stepper and insulation plate is intentionally to get…
In a.m. discipline you need 5 rounds per stage, standing, lying, kneeing. Therefore, this box provides 5 round per stage. Multiple parts: Box itself Slider (cover) Nameplate(s) Arrow Nameplates you need to design individually.
just print and snap it on the empty area side by side
Just a simple model made from scratch, Includes 2x 18mm Stand offs Includes 1.5mm ‘nubbins’ to prevent shorting. Requires - 6x Brass inserts (including standoffs) or 2 if using without. - 2x M3x6 Countersunk/FHCS Screws - 2x M3x6 BH/SHCS…
Mount for adding a 2510 fan onto the back of an LDO Nitehawk36. This uses the holes in the PCB (Rev C. version 1.4) so it should work for any Nitehawk mount you choose. Work in progress, but fully functional. Things to know: You do not…
Printed at 0.2mm layer height, but you could go lower. No supports or brim required.
Made this specifically for the Logitech K360 keys, however, the back part of this seems to be the same as my other Logitech keyboard so it may work for all Logitechs. The key cap size is different however from Logitech keyboard to…
This is a remix of fbeltrao's great Insulation and Mount Plate for the Mellow Fly MiniAB or BigTreeTech Piggyback36 boards. The plate was made stiffer without changing the external geometry.
8/14/2024 I just finished upgrading my RatRig, and have made a few EVA 3 modifications. It was designed in the following Onshape document, which was copied from the EVA page. I've also copied the mesh files to Github, Thingiverse, and…
This is a portable Meshtastic node based around the RAKwireless WizBlock with the RAK4631 Core It’s packed with features like Mag-safe mounting, wireless charging, GPS, a 1,100mAh internal battery, and a secure design using 4 M3x12mm…
BOM: 2510 Axial Fan M2.5x16 BHCS (x4) M3x30 BHCS (x2) Short Length of PTFE Tube Zipties Notes: All Parts are orientated for printing and do not require any supports Hartk1213's original PTFE Ziptie Clip and Fan Cover are interchangeable…
I liked hartk's strain relief mount for the reaper and wanted to splice it together with this umbilical mount for the StealthBurner G2E. I ran into an issue using the Filametrix version due to it not have a mounting hole for one of the…
Nitehawk36 mount for Orbiter 2 extruder using dragonburner toolhead on Voron v0.2 (Has not yet been tested; will test soon. Please post results if you do test) UPDATE (2/12/25): I have modified the model and moved the mounting holes down…
Desinged this for my Logitech keyboard due to not finding any suitable. First version was 1cm too high, so i had to do some tweaking with a soldering station. V2 has the correct height and wont be blocked by the volume button
LDO Nitehawk36 Cover Modification for Voron Trident I have remodelled the LDO Nitehawk36 Cover to fit the Voron Trident . The design now accommodates the necessary clearances for cable management,
This is a mount for the BTT PiggyBack36 to suit the Orbiter 2.0 extruder. M3 5mm OD 4mm Length heat inserts.
A case insert designed for the Tactix Tough Case (medium). It holds an iPad, the charger, 6 batteries, and the scanner. (https://www.bunnings.com.au/tactix-tough-case-in-tan-medium_p0331393) I'd print it in TPU with a low infill…
Just another Rugged case design. This time for a Kinhank K36, my latest personal gadget. The fit now is pretty decent, just a little squish down on the device. Little open area to protect the buttons and sticks. In the future I think I…
This PCB mount was very close to working, but just was missing the last little bit to make it work well. The cable LDO provides is a bit chonky, so this extends the length of the cable support and better accommodates the overmolded end.…
BOM 2x 18mm standoffs 2x 20mm standoffs 4x voron spec m3 heatset 6x bolts 2x 1/8" zip ties Print on back. Print it strong, don't skimp. Voron or monolith settings. On the sherpa side, just add 2-4mm to the bolts so they stick out the back…
I use a chromebox as a general use PC for my family and guests in our kitchen along with a very common and inexpensive wireless keyboard from logitech called a K360, which is setup for Windows use. This overlay reminds the user how the…
Used to hang the Logitech k360 on a wall. I used a Drywall screw to mount it, but any screw that can stay inside your wall should be fine
This is an 'Overmold' style strain relief for 14 and 16 pin microfit connectors, commonly used for umbilical and FYSETC Catalyst toolhead PCBs. Use the 14 pin for common Umbilical (i.e. LDO), and the 16 pin one specific to Catalyst V1.…
A dirty remix of the LDO NH36 to work with DIN Rail Bracket for easier repairs. Requires two M3x6mm BHCS for mounting into the bracket.
15mm de plus que celui d'origine
Keil für Wagenheber, zum Anheben eines Hauptfahrwerkbeines für HK36 Dimona, Spornradversion (TS, TTS oder R). Lochbild zur Befestigung auf 40x80mm Aluminiumprofil. Wedge for lifting jack, for lifting main gear of HK36 Dimona, conventional…
If you're like me and have children that like to run off with all the useful nick nacks, not like you needed those little riser feet anyway. Hrmph Here is a quick little print for replacing those feet after they disappear into the couch…
nitehawk36 backplate for orbiter2.5 and stealthchanger dragonburner backplate - no colision with optic sensor
Added cutout for BTT Piggyback36 extruder header to Rapidburner PCB mount for WWG2.
Intended for use with this filament cutter.
nitehawk36 zipties mount stealthchanger
This is a mount for the BTT PiggyBack36 to suit the Orbiter 2.0 extruder. M3 5mm OD 4mm Length heat inserts.
This remix removes a tiny bit of material, I'm just frugal. The important part is I've added a larger pawl. It holds the leg in the outer detent position better.
