Liczymy pasujące modele…
This is a Skadis Holder for the Wera Kraftform Micro Screwdriver with 6 Slots. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg (you need to print 2 Hooks). As shown in the Pictures the Holders can be…
Simple Toolholder with collet system in “Kraftform” Design a) If you want to print with 2 color, use the file “Kraftform_2K” b) If you want to print with 1 color, use the file “Kraftform_1K” c) If you want to print with Fuzzy Skin, use…
Wera Kraftform mit Shimano HollowTech Tool (TL-FC16) Entdecken Sie die innovative Lösung für das (De-)Montieren der Kunststoffmutter an HollowTech-Kurbeln - die perfekte Kombination aus dem Shimano TL-FC16 Tool und dem Wera Kraftform…
Hello together, here you can see my idea of a holder for the Wera Kraftform Micro screwdrivers ;-) The lower hexagon is there to keep the screwdrivers aligned and the upper circular shaped arms hold them in place. Would be nice if you…
Minimal space consuming stand for set of Wera Kraftform Micro screwdrivers.Almost any screwdriver from Kraftform Micro series should fit. Model is ready for print, no need for rotating. No supports. I printed it with 0,2mm layer height.…
I made this holder for the Wera Kraftform Micro screwdrivers. I put a lot of emphases on compactness, each holding 7 screw drivers. There are many similar holders, but I wanted it to be half pitch and high density. I tried making it 3…
Screwdriver Holder for Wera Kraftform Micro series Big Pack Print Settings Printer: Cetus mk2 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20 Filament: Das Filament PLA Black Category: Tool Holders & Boxes
Only a small remix with space for 8 screwdrivers
This is another remix of the Wera Kraftform Micro Screwdrivers. The photos show an older design, which was not stackable, which was really dumb. The uploaded model is a updated version and is stackable .
Designed a couple of BMW e30 Brake/Fuel line clip. Should not be sold for 30 bucks, like some a....s are doing it. Have fun, keep printing
Holder for Wera Kraftform Plus – Series 900 Big Pack for the Multiboard The holder for Wera Kraftform screwdrivers (900 series) is designed for use with the Multiconnect System by @DavidD for Multiboard. Both holders are intended for the…
We were given a KidKraft Play Kitchen for our kids. The sink faucet was broken with only 1 piece left of it. I modeled this from both that remaining piece and the stock image found online. The faucet tube and handles move by way of…
Multiboard mount for Wera Kraftform Micro screw/hex/torx drivers
Zum befüllen der Dosierkapsel wird der Trichter drüber gestülpt. Keine Stützstruktur nötig. Bei Bedarf den Trichter innen mit feinem Schleifpapier schleifen. The funnel is placed over the dosing capsule to fill it. No support structure…
I have made this using the idea from Bob, but redrawn in FreeCAD. I've also decided not to have the model “spring” to grip the screwdriver shaft (The wedging action was damaging the screwdriver handle). So now the screwdrivers just sit…
Zum einfachen befüllen eines Wolkenkraft Äris Vaporizers. Bei Bedarf den Trichter innen mit feinem Schleifpapier schleifen. For easy filling an Wolkenkraft Äris Vaporizer. If necessary, sand the inside of the funnel with fine sandpaper.…
Maybe my mounts are a little bit “overdoing” :-) , but the Wera Kraftform Screwdrivers are really good and expensive. That's why I wanted to give them a special mounting. If you want to print the labels in 2 colors, you've to set a…
This is a Skadis Holder for the Wera 817 Kraftform Kompakt Screwdriver/Bitholder. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg . The Design is inspired by the ikea skadis wera mini grips holder from…
Wera Kraftform Micro holder Adaptable desktop holder for Wera Kraftfrom Micro. The Example shown in the pictures fits the Big Pack set with 25pcs and still has some extra space for additional ones. The parts of the holder can be screwed…
5 x 5 x 4 Gridfinity Wera Micro Kraftworm Holder
Print in PLA 0.2mm layer height supports OFF
As everyone knows, Wera Kraftform Screwdrivers are of their own kind. Good grip, precise manufacturing, a joy to use. As I own the Big Pack 300 and use them a lot, I was looking for holders to mount them to my Skadis Pegboard. One day I…
This is a Skadis Holder for the Wera Kraftform Screwdriver (with 6 Slots). Material: PLA Infill: 20%
Scadis pegboard holder for 8 screwdrivers from Wera Kraftform.
I can across the design of TJDesign and I liked it. Printed in two parts without supports, multiple sizes, holds secure and you don't have to lift it all the way up because of the cutout. But during the printing a came across the problem…
This is a remix of @Skrivkunnig_276816 's holder for Wera Kraftform Micro screwdrivers. It has room for 5 screwdrivers in a 2x5x4 Gridfinity bin. I wanted a smaller version with room for 5 screwdrivers, just the ones I need for printer…
UPDATE 03/07/26: There was an overhang in the centre of the flower; I have amended the template to rectify this issue. The files are now up to date. My apologies to anyone who has already downloaded them. This wall decoration is inspired…
Eine Nachbbildung des Windrades Nordex N175/6.x und der Windturbine Vestas V172 - 7.2 in ungefähren Maßstab 1:500. Es handelt sich um eine stark vereinfachte Abbildung. Die Nabe der Windkraftanlage ist ca. 25cm hoch. Die Bauteile können…
Zum einfachen befüllen eines Wolkenkraft FX Mini Vaporizers. Bei Bedarf den Trichter innen mit feinem Schleifpapier schleifen. For easy filling an Wolkenkraft FX Mini Vaporizer. If necessary, sand the inside of the funnel with fine…
I included model files as pre cut to 2 parts for smaller printers and as a single models for printers capable printing 4x6 sized gridfinity bins.
Remixed for 10 capacity and length reduced by 3 mm so it would fit on my circular bed. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Tool Holders & Boxes
Remixed from Ricard2K's stand - the top part (screwdriverstand.stl) is unchanged, as it fits the screwdrivers perfectly. I have redesigned the base (Wera Stand 2.stl) as whilst the original is functional and clearly works, I kept having…
A remix of Peaches491's Wera Kraftform Kompact pegboard mount, for the IKEA SKADIS pegboard/mounting system. Integrating the most secure/best hook/mount I've yet to find from crijnsjan's digital calliper holder. Print upside down with…
A remix of the model from users dodasch and Staubi that couples directly with a quick release chuck 3MF saved with OrcaSlicer 1.7.0 Printed with Sunlu PETG black and mint green
the pods have dimensions of 10mm outside and 8 mm inside so maybe others fit too
Uses 3/4” sheet for the base, 1/4 machine nuts/bolts, 7/8” dowel — and some tape to fine-tune clearances. The foot is designed to print with TPU (1” forstner bit to counter-sink), although not really required. If you have a 1/4 button…
French cleat holder for the Wera Kraftform XXL set.
This is a jar for five capsules of the Wolkenkraft Äris (Ultra) or FX Mini. The capsules are ⌀ 10mm and 12mm in hight. The jar itself measures ⌀ 40mm x 22mm height. You may also like this for the Norddampf Relict .
I wanted a clean and small sized wallmount for my Wera Kraftform Turbo Set. Therefore I designed a Bitholder and added a Remix of https://www.thingiverse.com/thing:3090993 Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts:…
A easy to print holder for Wera Kraftform Kompakt screwdriver to attach onto the honeycomb storage wall. Version 1 requires a M3 screw and nut also you need to print the insert-with-M3 from the Honeycomb Storage Wall . Version 2 includes…
The existing model for the Honeycomb Storage Wall (HSW) by BjoernF only featured 5 slots, leaving me screwed, as I have a set of 6 Wera Kraftform Micro's. So i've remixed the original from Bob, using the concept from BjoernF. Open source…
Two adaptor brackets which, when combined, allow for the installation of Wera Kraftform Screwdriver, Hex & Torx Driver etc. racks with 1"/25mm pegboard. The adaptors are based on an stl file I found online designed for IKEA Skadis rack…
Are you tired of having your Kraft Singles go everywhere all over your fridge? With this you can load up a standard Kraft singles pack (24 Slices), Have easy access to them from the sides, and keep them all together. Used PLA .02mm layer…
Present for a friend but I thought others might like it too. its a clone of the fenix mini vaporizer i think.
Gridfinity tray for the Wolkenkraft Äris & Äris Ultra vaporizer. You can use this with a rugged Gridfinity box ( Link ). Storing of the herb capsules and also the accessories is possible. Tight fit, i used a thin band under the vaporizer…
A small device that helps fill the capsules. I am always grateful for suggestions for improvement
Hack up your allen keys , heat key up and insert into handle.
I recommend printing a single driver holder to check fitment. Adjust the model a percent or two as necessary. This holder requires printing a left and right flat ‘sidepiece’ for each holder panel from the DDD Wall Control project.…
Popis baby chair holder KINDERKRAFT ENOCK držák na dětskou stoličku kinderkraft enock Designed for the left side, must be mirrored for the right side! Print Settings Printer Brand: Creality Printer: Ender 3 V2 Rafts: No Supports: No…
Hier zwei verschiedene Modelle von Trichtern die ich mir für die Werkstatt hergestellt habe. Einen großen mit großem Durchlass zum betanken von Fahrzeugen wie Vespa PK50 oder Traktor und einen etwas kleineren mit integriertem Gewinde.…
Remix meines 1/6 Modells, ohne Text-Prägung, vier verschiedene Maßstäbe von 1/10 bis 1/16. STL only.
I designed a better holder for my set of 6 WERA Kraftform Plus Torx T40/30/25/20/15/10 screwdrivers than the one that was supplied. Advantage: Minimal space requirement in height (~1cm) for hanging and therefore also suitable for small…
This is a Lid Mount for Sortimo L-Boxx to store 15 Wera Kraftform Kompakt Bits.
I couldn't find a Gridfinity storage for the Wera Kraftform Plus 334/6 you can buy. Other models didn't have all the correct sizes, so I made this. I had to print this in two pieces to fit onto my Prusa Mk3, so I have uploaded the…
A 1x1x3 Kraftprotz glue holder build with Gridfinity Rebuilt
a remix of https://www.thingiverse.com/thing:2918462 This are all the screwdrivers and holders I have. The files can be printed without support but i recommend a brim. When finished shave down the walls on the bottom and sand it clean.…
Ich habe auf Makerworld gesehen das jemand eine art Düsentriebwerk erstellt hat und habe mir gedacht hey das ist cool und mache ich auch mal. "Tja und hier ist mein Jetstream Adapter😅 " Das Teil ist sehr einfach zu Drucken und sollte…
Recently I found this nice coupler for Parkside or Powerfix quick grip bar clamps: https://www.printables.com/model/698050-parkside-klemmenverbinder It prints & fits really nice on said clamps, but I don't have a lot of them. Most of my…
In 1993 Märklin released a gauge 1 / 1:32 model of a DB (German railways) maintenance train (Rottenkraftwagen.) Model# 5739 (digital) and 5740 (analog) were actually designed and produced by Hübner. They are heavy, solid models, mostly…
Skadis holder for Wera Kraftform Screwdrivers Remake with slightly less tight fit. Original designer is koldo19
Box for Kraftform Kompakt VDE 17 Universal 1, 17 pieces set . Requires 8 strong 3x2mm magnets to hold cover.
This design is aimed for water-borne users who require a way to top-up a low-pressure inflatable craft remotely without having to put their mouths directly to the boston valve. More specifically, I made this for my Telkwa DIY packraft so…
These are printable coins for the game barrage /Wasserkraft. enjoy :)
A printable key that fits over the hex part of your Wera micro screwdriver for more leverage and control I made it to be a perfect friction fit on my printer, just scale it accordingly if you need a better fit on yours :)
Printed on Bambulab X1C mit AMS PLA Black & Whtie Muss mit Supports gedruckt werden 0,2mm Layer 0,4mm Nozzle Einmal die Datei mit Schraubendreherbezeichnungen und einmal Blanco
Wera micro organizer Use a drill if you want to open up the holes a wider for larger diameter tools please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
Einsatzschale für die Wera Kraftform Kompakt VDE Einsätze wie es sie oft im Set zu kaufen gibt. Durch die Griffmulde können die einzelnen Einsätze leicht entnommen werden. Die Einsatzschale ist auf Grund des Druckbereichs des Prusa Mini…
If you have some smoke sessions with fiends, and want a little bit of Hygiene you can print mouthpieces in different colors for your friends. fits directly on the original glass mouthpiece. ABS/ASA/PLA/PETG Infill 100% Brim Support NO
I printed with one plate on a1 mini by just cutting in half then printing. Worked well. 3mf print profile and photo included.
First, thanks to https://www.printables.com/@AD3D_537282 for not just providing the design, but also including the F3D file. This allowed me to learn how they made it in the first place (they are rather talented check out their other…
Das bekannte "Spiel" aus "Weihnachten bei den Hoppenstedts". Grob modelliert aus den paar Szenen in denen es zu sehen ist. Leider ohne Kühe und Bäume. "Brennstab" idealerweise aus leuchtendem Filament drucken. The "game" known from the…
I got myself a Wera Kraftform XXL screwdriver set and found it wasteful to throw away the existing rack for a printed one. This print will allow you to take the rack you already own and hang it over the top of an Ikea Skadis pegboard.…
Holder for Wera Kraftform Micro drivers. Print instructions I did not make these. Original sources: https://www.thingiverse.com/thing:1507753 https://www.thingiverse.com/thing:3091820
Skadis holder for four kraftprotz glue bottles. One of these glue bottles has a diameter of 38 mm. Printed in white PolyMaker PolyTerra PLA; used supports for the skadis hooks.
This is designed for the Wera Kraftform Kompakt 27 RA 1 SB Ratcheting Screwdriver & Bits and will mount it onto the Skadis Holder. Link the driver this is designed for -…
Wera Kraftform Micro driver holder that hangs at the back of the pegboard, this saves precious pegboard space.
Overview This is a print-in-place case specifically designed for the Wolkenkraft Airis Ultra vaporizer. It requires no supports , and prints fully functional straight off the bed. Key Features No supports needed – Designed for clean,…
Es handelt sich hier um eine Gridfinity 4 x 4 worauf ich eine Aufnahme für Wera Kraftform Einsätze konstruiert habe. Insgesamt 11 Einsätze finden dort ihren Platz. Beachtet bitte das nicht alle Einsätze in jedes Fach passen da diese…
Screwdriver holder for smaller electronic screwdrivers (designed it for the Wera Kraftform Micro Series) it's not "clip in" like the original one I got the design idea from (Universal screwdriver holder! by RoBotniK) works like a charm, I…
There are four types of inserts: Type A is 13 mm and may be used on a second and third level with no modifications and on a lower level with gasket. If you want to use Type A in a first, lower level, you need to add A+ gasket under it.…
Gridfinity (4x3x6) compatible insert for an Wera Kraftform screwdriver kit. This is for a Canadian specific kit with 3.5mm flat, Robertson #1 (sq6), Robertson #2 (sq8), Phillips #1 and Phillips #2. “Bits” can be tilted up for easy removal.
Replacement for the hose connector of a Klarstein Kraftwerk AC unit. Fits 150mm hoses just as the OEM part. Do to the high temperature at the exhaust, please do not use PLA but at least PETG or another heat resistant material. Printed…
Modeled this to better connect an insulated air hose, instead of the standard air hose, to the hot air outlet. The threads are mostly there to add some grip, I have fastened it with some tyraps. It gets hot enough that PLA will deform, so…
Wera style Kraftform Handle with Changeable Hex Bit Color coding hex bits You can create a color change at 13mm to 15mm on the Hex bits to color code them Supported bits Normal Hex bits Long 25mm Hex Bit adapter Allen key 2.5mm - if you…
Wera 7515 Kraftform Safe-Torque Speed holder gridfinity tray.
I needed a larger compartment to contain my Wera Kraftform Micro, so I made a remix, so I could adapt it to my Fasano tool trolley. It can contain up to 22 Wera Kraftform Micro. It is printed in two parts, and then unite with each other.
Sonderkraftfahrzeug 2 (Sd.Kfz. 2) je lehké polopásové vozidlo zkonstruované a vyráběné firmou NSU.
Split and mirrored the original 12 piece tray to only hold 5 pieces for the Wera Ball End Hex driver set. Remixed from Luis' excellent model - https://www.thingiverse.com/thing:4637532 (Thanks for including the STEP file!).
Fits 6 screwdrivers and is somewhat stackable. The measurements are a bit special, since it's what I needed to fit my drawers: 189x89x22mm.
Hey all. Uploading my second design here for a wonderful Wera Kraftform Micro Precision screwdriver set I received as a gift. I really like this set of drivers, perfect for all my electronics hobbies, However, i was less than thrilled…
Nachdem der Marder mir dieses Teil zerstört hat, habe ich es aus TPU nachgedruckt, hält seit dem und macht was es soll.
Holds 24 drivers in 4 tiers of 6 drivers. Perfect for organising Wera Kraftform drivers and keeping them easily visible and accessible. Designed for mounting to 2020 extrusion. Print with the angled “back” on the bed for best results.
A simple cheese slice holder for your fridge drawer. 0.6mm nozzle, 0.3mm layer, PETG, Sovol SV01
Hierbei handelt es sich um einen Remix des Models von rtarbutton (dickes Dankeschön ;-) ) mit dem Namen “ LTT Magnetic Cable Arches ”. Die Gründe des Remixes waren Die Konfigurierbarkeit der Magnetkraft durch den Einsatz verschiedener…
This uses the DDD Printable Wall Control System ( github ) to mount the screwdrivers. 932/6 Screwdriver set Kraftform Wera 334/6 Screwdriver set Kraftform Wera Use a good percentage infill to keep this rigid, at least 40%. For the…
A 1x4x6 gridfinity for a wera 1013 bit holder and 14 bits. Bits can be a little tricky to remove as there is not all that muck space in the 1x4 bins. I printed my model mirrored.
I printed this model in TPU to be able to inflate easily my packraft with this tiny pump .
This is a Skadis Holder for the Wera 8004 Zyklop Switch Ratchet and the Wera 813 Kraftform Kompakt Screwdriver/Bitholder. It is mounted to the Skadis Board with the famous Universal Hook from CSD_Salzburg . The Design is inspired by the…
