OTF Fidget Knife Blade with stronger clips
I had problems with the original Blade not locking correctly, so i made the locking parts of the blade stronger.
- Pobrania
- 5547
- Polubienia
- 555
- Ocena
- 4,76
6473 modeli
I had problems with the original Blade not locking correctly, so i made the locking parts of the blade stronger.
This modular scraper is designed especially for 3D printer bed cleaning – perfect for removing filament residue, glue, or adhesion products from the build surface. It can be used with a standard Stanley blade or with various 3D‑printed…
Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non printed parts list is below along with easy step by step assembly videos. Help is available, usually within 24hrs. You can contact me thru private…
A useful tool for removing prints from the bed with interchangeable 3D printable blades for when one eventually wears out. You can print the body in either PLA or PETG, however for the blade PLA is highly reccomended. To install the…
A scraper using simple razor blades which is not flimsy or imprecise. The blade is held firmly in place. Please be careful when inserting the blade. Strongly inspired by https://www.thingiverse.com/thing:2024019 Use razor blades such as…
I've improved some details from the original scraper. Also, I've added a case for your security. All you need are an M3 8mm screw and a nut. Print Settings Rafts: No Supports: Yes Resolution: 0.2 Infill: 30%
I loved the original toroidal pull-copter design, and thought it would look cool if I combined 2 together. It weighs a little more than the original, but I feel like it's more stable in flight, and it looks cool! Prints great in PLA and…
Garage Set 8 : Handle for hacksaw blade Update : U1 : Screw with little head U2 : Nex Gcode and print successfully Please vote for me !!! Dje See also in pratical contest: Bathroom Set :…
A cluttered sink, a dangling charger, a trimmer awkwardly balanced on the edge… sound familiar? This is exactly the kind of daily hassle that inspired me to design this socket-mounted Philips OneBlade holder. Thanks to real-world use and…
Update: 5 Jun 19. I had a problem with occasional jams during loading with blunt tips hitting the blade. I've modified the selector and blade cover a bit further to prevent this from happening. I've also made the blade "sockets" much…
“ The interior of the cabin is almost entirely bare. The air is stale and musty and the floor and walls are painted in a fine layer of dust. The only furniture of note is a plain wooden table. Perched on that table is a pristine blade.…
Festool Saw blade holder – simplify your tool management Where do you currently store your saw blades? Print your own Festool saw blade holder and make your everyday work easier and more productive. Don't have Festool saw blades yet?…
Find english version below... Box bzw. Behältnis zur Aufbewahrung von AA-Akkus (HR6) und/oder AAA-Akkus (HR03). Unterschiedliche Bereiche und Farben dienen der Unterscheidung ob die Akkus VOLL aufgeladen oder LEER sind. Die…
I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…
Replacement blade for the original Einhell Trimmer GC-CT 18/24 . If you are annoyed with your trimmer blades constantly breaking, consider using my string-trimmer head. It can use string-trimmer string or TPU plastic, both of which are…
ASA or PETG 0.15 Layer No Support, no Brim needed 100% infill
This is a replacement fan blade I made for a hair dryer that had some blades broken. As its dimensions may not fit your needs, I will share with you the SLDPRT file so you can edit them your own. Preferably to be printed with PETG or…
A butterfly knife/balisong without a blade? A butterfly… nothing? A Butterfly No-Knife! After seeing videos of these things, I felt I had to try one, and thought it would be quite easy to CAD up. A few prototypes later, this is the…
In een vroegere post heb ik een rechtse geplaatst, na aanvraag een linkse nu met tekening en afmetingen. In an earlier post I placed a right one, after request a left one now with drawing and dimensions. Ludo
Sicherungszieher für Fahrzeugsicherungen / MINI 997 Blade Fuses / Automotive Fuses Praktischer Helfer beim Sicherungsziehen bzw. setzen Konturen → 2 Decke → 5 Boden → 5 Erste Schicht → 0,2mm Variable Schichthöhe Stützen → Überall Infill →…
V2 - jetzt Online Wenn Sie auf der Suche nach einer modernen und praktischen Wandhalterung für Ihr Specialized Ladegerät SBC-C07 sind, dann ist die Halterung die perfekte Lösung für Sie. Die Wandhalterung bietet eine sichere und stabile…
Smurf, Smurfette, Papa Smurf Cokkie Cutters Stamps and Blades
As a fan of the Battle Angel Alita manga I did enjoy the Cameron / Rodriguez film. I still, however, prefer the original manga version of the Damascus Blade. So here it is, printable or cutable. You can print it on printer of your choice…
Minimalistic design suitable for precision workshop projects.
Simple blade cover for a standard x-acto handle with #11 blade. Blade cavity approx. 15mm deep and 9.5mm wide. Recommend printing with a brim.
This cutlery tray now uses the whole height of the drawer and has more individual separation for small stuff you usually need in a kitchen. The larger models have “wings” to prevent warping. Just cut them off after printing. No support…
Improvements to the filament path to resolve issues I was having with the curly end of a spool not unloading reliably. Added dual blade in same selector dimensions, please note this does require TZB-MMU2S firmware to cut successfully.…
Gazing Eye KeyBlade From Kingdom Hearts.
Just a fun little game that you can print and throw. Hold the leg with the hole in it in your right hand and throw with a flick at around 45 degrees to see if you can get the boomerang to return to you. I find a light weight (0.4 nozzle)…
just a little thing, to help get an overview of all the jigsaw blades we have. can be taken apart, for easy access
A stylish solution for keeping your essential tools at your fingertips, seamlessly merging form and function. Example is printed with a PrusaMini.
Shawn's original Scraper & Double Razer Blade model includes a very nice handle, but it was slightly narrow for my blades. Originally I simply scaled his up by 2.5%, but I was printing multiple handles and decided to flatten the model so…
A simple yet effective tool designed to make cleaning your 3D printer build plate faster and safer. The flexible handle provides just enough give to help remove stubborn print residue or thin first layers without damaging the surface.…
[Disclaimer] [FR] Je décline toutes les responsabilité dans le cas où l'utilisation d'un dé pipé Pilote NEXUS serait découverte lors d'une partie de jeu quelle qu’elle soit. [EN] I accept no responsibility in the case where the use of a…
A stylish dock for your Oneblade QP2724 with snap in charging feature - keeps your OneBlade ready for action anytime!
I have designed an enhanced version of the Ryobi trimmer plastic blades that offers a slight increase in length compared to the original equipment manufacturer (OEM) blades. This modification aims to improve the trimmer's overall cutting…
The 3-way charging cable table mount let you optimize your office table space. Due to the table mount you have quick ans easy access to your charging cables without looking for them under your table. Attention: If you print the table…
A quick and easy holder for the blades for oscillating multi-tools. Uses a shock cord to hold the blades in.
Accurately dimensioned model of the Stanley 1992 blade. The bottom length is 62mm, the trapezoidal height is 19mm. The trapezoid angle is 51 degrees. The notch spacing has also been accurately measured.
Modified adapter attachment to socket and adapted handle for OneBlade QP6530 Printer brand: Prusa Printer: MK4 **Rafty:** No matter Supports: Yes **Fill in:** 15
This is an organizer that I created to store my X-Acto™ tools and blades. There are 10 compartments for your blades and one compartment for a couple of tools. See attached Image for compartment dimensions. I recommend a brim and a very…
Connector between sith lightsaber ( https://www.printables.com/cs/model/3722-collapsing-sith-lightsaber-removable-blade ) and jedi lightsaber ( https://www.printables.com/cs/model/3721-collapsing-lightsaber-removable-blade ). A little…
KCD2 Inventory stand for Phillips OneBlade Im so excited to introduce my take on the Philips OneBlade & KCD2 contest. The organizer is clearly inspired by the inventory from the legendary Czech game Kingdom Come: Deliverance II . But…
A simple blade guard to keep grass out of the blade screws and still have access to screws for the blade disc. Printed on Prusa XL with PETG and the STRUCTURAL profile
handle for a metal saw blade; rúčka na pílový plát
Philips OneBlade Travel-box with stand A small box with a lid where the accessories are stored. https://amzn.eu/d/ivvry3F
This Wilkinson razor blade holder is your new secret weapon for precise, gentle scraping. Perfect for removing stickers, adhesive residue, and other debris from flat surfaces. Simple yet effective, it’s ideal for detailed tasks that…
Small tools holder A holder for small tools: tweezers, dentist tools and x-acto utility scalpel with replaceable blades. Print it “standing” with 10% gyroid/grid infill and grid support from build plate only. The tool holder module…
inset jigsaw blades in slots and use drill to move wood through the holes to create dowels
Hallo liebe Community Hier findet Ihr einen Galaxy Watch Halter inkl. Aufnahme für das 29-30mm Ladegerät. Die zwei Ausführungen können als stand alone Teil genutzt werden. Die single Variante hat nur die Aussparungen nicht um den…
I like flying the Blade mCPx V2 indoors or in a calm day in my back yard when I do not want to drive to an RC field to fly the larger RC helis! It is very, very tough and can take crashes without any damage except the landing gear/battery…
for MK4 users , keep the speed down and without input shaper increase Temp. a bit for better layer adhesion printed wit Prusament PLA
Simple stand for ZimaBlade which allows the board to be placed on the flat surface with storage hanging above the computer. I've designed it this way because I suck at cable management and I've mounted power/Ethernet/miniDP cables too…
A small box to dispose of old XACTO blades. The slot is large enough to fit #11 and #2 blades. The lid is designed to be semi-permanently snapped on, but it isn't impossible to remove in case the user wants to reuse an old blade.…
This is a replacement blade for the Paper scissors model with a larger finger hole for bigger hands (see second picture for side-by-side comparison). The basic blade shape and joint hole are unchanged, so you can mix and match with the…
This pair of models is a replacement Beyblade arena foot and mounting plate. Stock height is maintained The design should also allow repair of an arena whose mounting squares have split or broken, as it uses the outer two holes and…
I made this at home, I found bay blades in my old toys and made this little stadium. 😊
I have a set of DT swiss wheels which, in addition to having bladed aero spokes, also uses radial pull spokes so the spokes will freely rotate. DT swiss makes a device which works really well, but I prefer to make my own. The handle is 90…
This is a simple x-acto blade #11 cover to prevent unwanted cut when the tool is not in use. Print without supports.
This a parametric model of a Angle Setting Block for chisels and plane blades. It is important to have consistent bevels on your blades and this setup block keeps your angles correct every time. Just line up the chisel or plane blade with…
I've made an entirely different version of this cover if you're interested. This is a simple blade cover for the very well made Olfa Hobby Knife. I designed this because i mistakenly bought a blade holder that came with the saws and no…
2.0 mm layer height, 20% infil, 3 perimeters. Tree Supports.
Reloading tray for .338 Laupa Magnum. Fits also for smaller caliber.
My simplified version of Shin Hati's lightsaber scaled for a 25 mm (1") blade. The model has an internal compartment for my electronics carrier (https://www.printables.com/model/797013-lightsaber-electronics-carrier) and uses the Adafruit…
Ce modèle 3D représente un emoji enrhumé tenant un mouchoir contre son nez. Il est inspiré de l’emoji 🤧 utilisé pour exprimer un rhume, une allergie ou une mauvaise journée. Impression : Adaptée pour les imprimantes FDM et résine Supports…
Der Bügel dient zur besseren vertikalen Filament-Führung beim entladen.
Perfekt um Sicherungen oder ähnliches direkt im Stromkasten aufzubewahren. Die Lade kann direkt auf die Hutschiene vom Verteilerkasten eingehängt werden, und ragt über die Abdeckung heraus. Viel Spaß beim Drucken.
Bluetti Halter für das 500W Netzteil T500 oder den Ladeverstärker Charge Enhancer D050s zum Solargenerator AC200(P/MAX), B230, B300, AC300, EP500 Das Netzteil kann ohne Schrauben zu lösen, entnommen bzw. eingeschoben werden. Am hinteren…
i personally prefer using inland pla+ for this on 210 nozzle temp and 65 bed temp for best results (not all information may be accurate as the website had a stroke while i was uploading this)
Ideal fürs Halloween Kürbisschnitzen mit den Kids.
This is a model of mine, specifically for steam turbines, based on the root. Because of the airfoil's profile, I had to make 3 versions prior. It is an improvement, I hope. Enjoy!
The screw should hold the cover with the magnet Die Schraube sollte die Abdeckung mit dem Magneten halten
Ladestation zum Laden einer PowerFlare Leuchte mit seitlicher Ladezustandsanzeige Ladeschale PowerFlare Gedruckt mit PETG Schwarz Lichtleiter Gehäuse mit PETG transparent Lichtleiter aus zugeschnittenem und gebogenem PETG Filament Stück…
KCD2 Medieval Pillory Stand for Philips OneBlade 360 Secure your blade in history. Immerse yourself in the rich atmosphere of Kingdom Come: Deliverance 2 even when you aren't playing. This Limited Edition accessory for the Philips…
Store 7 ¼” circular saw blades with this storage case. Sharp carbide blades can be stored in your toolbox or tool bag without damage to the blades or bag. Case will hold several blades, cut foam or cardboard to put between blades for…
PLA, 0.15 - 0.2mm layers, no supports 1h37m
Starting point of the project was learning about past sanitary customs and finding shapes which had the potential to be repurposed into functional bathroom object. The main inspiration comes from medieval castle toilets, which typically…
Uses neodymium magnets 5x12mm cylinder (optional) internally to mount it to any piece of steel (e.g. fridge?). It also inserts 6x12x3 mm bar neodymium magnets. There are pauses in the gcode for this. This allows you to keep your jigsaws…
Auf Wunsch nun hier die "Komplett Variante" meines bewährten Models ( hier ) für Rasierer Kamm und dem kompletten Zubehör. Ich habe in die 3mf und bgcode Datei einen Druckstop eingebaut, damit kann man die Beschriftung für die Bartlängen…
This remix uses all printed plastic pieces and removes the OpenBeam aluminum pieces. All you need are some elastics and some glue after you print the pieces. This is the Dual Arm Blade used by Alexia Harmon in the book The Defender. This…
Inspiriert von @araymbox (https://www.printables.com/model/149798-ikea-hemnes-shoe-cabinet-divider) habe ich für die normale Kommode mit einer Tiefe von ~43 cm eine zweiteilige Trennung konstruiert welche mittels Schwalbenschwanz…
I need cover for blade from standrat remote control for Mazda 6 keyless. There is a hole for immobilizer chip and the blade is holding by stick (hole on the picture. Bouth sides haves shape for finger holding.
Supports razor blades for Leon.Reijnders model. Uses 3 M5 screws 3mm ideal length. Blades secured with M5 screws, halved
Made an turnigne indicator out of my logo, maybe you like it to :) PLA works great. Two versions availabel: -) for one 5x5x5mm magnet, just glue it in the hole (5,2x5,2mm) -) for one Ø8x3mm magnet, glue it on the back side
Yet another Hobby Knive Cap. The ones I tried did not fit the wider blades I often use, so I decided to design this one. The wider shape also prevents the knive from rolling of the table. Print parameters: PETG layerhight 0,3mm print…
Ich habe diese Ladestation für mein Xiaomi 12T und meine Xiaomi Watch 3 Active mittels Fusion360 konstruiert. Über den Prusa Slicer umgewandelt und dann mit meinem Ender 5S1 in mehreren Durchläufen gefertigt und getestet. Ich hoffe, sie…
This is the Dual Arm Blade used by Alexia Harmon in the book The Defender. This blade is attached to the forearm and in the book is launches forward 8in in front of her hand when she thrusts forward. The book is available on Amazon…
My wife received this vegetable chopper as a gift (it was purchased on amazon.com ). The blades are wonderfully sharp which is great for chopping, but there is no good storage solution for the blades when not in use. I designed this to…
適用 4英吋砂輪片,內容高度 5英吋
Fan got knocked off a table and the blade broke. I couldn't find a replacement model, or even a replacement part from manufacturer, so here we are. I printed with my 5TH Prusa XL in Sunlu black PETG with support interface Sunlu Black PLA.…
After a while (10 or more years) the fan that positive-pressurizes the pellet hopper can become defective. When that happens, usually due to congealed oil in the fan motor, fire backs up through the pellet feed tube into the hopper…
I created tall supports to help print this vertically.
We have a Beast Blender . The exposed blade system bothers me. I don't like it lying around, nor should it ever be mounted on the blender without one of the jar attachments (if you have one, you likely understand), however with a jar…
EN ( FR ) en dessous The Horl holder on the “cruise 2” model does not allow small blades to be sharpened. I therefore propose this model for sharpening both narrow and wide blades. 4 modifications compared to the original holder: 1- More…
Ersatz Handgriff für Mars Svratka Schubladen. Wenn der Griff abbricht und in Einzelteile zerbricht oder in Verlust gerät, dann braucht man nicht die ganze Lade nachzudrucken. Den Griff schiebt man in die zwei Nuten ein welche für die…
Nothing much to add here, I hope you like it and you remake it to something epic If you love this design and want to see more fun projects like it, consider joining my club on Printables to help me keep adding free models for everyone to…
Den Wandhalter gibt es mit Kamm-Fach oder auch ohne Kamm-Fach Ich bevorzuge die Rasur ohne die mitgelieferten “Abstandshalter” und nutze stattdessen einen speziellen Kamm, wie auch mein Friseur, daher habe ich dafür einen Platz…
Replacement blade for Ultimate Speed ice scraper from Lidl, as this is unfortunately only supplied with one blade and no replacement was available. Recommended layer height: 0.15mm Material PETG Happy printing! If you like the thing leave…
PLA Füllung 20% Schichthöhe 0,3mm Halter mit Stützen und Rand