14 345 modeli
A new design inspired by the wind and sand of our planet (and other planets to). Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the…
Wydruk około 6,26 €–7,65 € nettoWstępna wycena jednego wariantu
https://www.buymeacoffee.com/maxt ---------------------- Update log January 2024: Version 2 of the base has been uploaded, see below for more info SIZE The model will fit on Prusa Mini+ (180x180). Feel free to size it up or down as you…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
An anti-sphere inspired plant pot, giving it a very spacy and futuristic design loking like it is coming from the year 2148 ! Your plants will love it! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
I recently watched Game of Thrones and it inspired me to create such a designe - we hope you like it! Looks great in modern interiors, fits all plants well. Best to print in 2 or 3 layered vase mode settings. Works with most filaments.…
Wydruk około 2,47 €–3,01 € nettoWstępna wycena jednego wariantu
A set of leaf coasters and decorative holders. These coasters will catch the condensation from your glass and you can use it to water your plants! Nothing quite like free water, right? When you're done with the coaster, plug it back into…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 12,16 €–14,86 € nettoWstępna wycena jednego wariantu
~ Design collaboration with Azurefilm ~ A nature inspired plant pot! We hope you enjoy it as much as we did design it! Used Filament: This model was printed using Sage HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us…
Wydruk około 2,77 €–3,39 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed Scale it as you like :)
Wydruk około 7,51 €–9,18 € nettoWstępna wycena jednego wariantu
A simple design with a very characteristic feature of an inverted hexagonal pattern on its exterior Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters…
Wydruk około 1,87 €–2,28 € nettoWstępna wycena jednego wariantu
A nice tradicional pot and planter for plants or flowers. Best to be printed in 2 or 3 layered vase mode settings - material: PLA Happy printing! :D
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
A simple mosaic inspired geometrical plant pot for your house plants! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Easy-to-print flower pot with a simple and modern design. No supports needed. The planter can be resized according to your preferences, either enlarged or reduced as necessary. This design is easily printable.
Wydruk około 8,28 €–10,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== PRINT INSTRUCTIONS 6-12% infill 15% infill for tray 5 top layers 8 top layers for tray 2-3 outer walls. Tree supports for tray, build plate only. Fuzzy skin enabled for…
Wydruk około 8,17 €–9,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you're running late with your Halloween decoration or just don't want to use up half a spool of filament for a decent sized pumpkin then these models were made for you! I've designed these Jack-o'-lanterns as a late entry for the…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed (Print the pipe upside down) Scale it as you like :)
Wydruk około 7,83 €–9,56 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 3,80 €–4,64 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
Wydruk około 7,23 €–8,83 € nettoWstępna wycena jednego wariantu
A quite unique 80's style plant pot design inspired by the amazing film called The shining! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Wydruk około 2,20 €–2,68 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 6,22 €–7,60 € nettoWstępna wycena jednego wariantu
A simple yet modern design of a distorted plant pot. Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena jednego wariantu
A lovely gift from the bottom of your heart. A plant pot fit for Valentine's Day. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
Wydruk około 2,00 €–2,44 € nettoWstępna wycena jednego wariantu
The original hexagonal vase more planter is one of my most popular planters. I see the appeal… the 3D printing community loves hexagons. But it always bothered me that it prints in two pieces, making it not a true vase mode model. So I am…
Wydruk około 4,77 €–5,84 € nettoWstępna wycena jednego wariantu
Let me share with you another design of a poke-planter. Suitable for growing succulents, microgreens, or small houseplants. I hope this will brighten someone's day. I will be happy to see your prints and your "hairstyle" variants, so…
Wydruk około 4,11 €–5,03 € nettoWstępna wycena jednego wariantu
This plant support cage is designed with an open side so that you can more easily add it around plants that have already grown, allowing you to more gently add support for leaves, fruits, and vegetables without stressing the branches .…
Wydruk około 2,32 €–2,84 € nettoWstępna wycena jednego wariantu
A simple design that everyone could enjoy. Inspired by a simple wave structure. Used Filament: This model was printed using PLA MINERAL Concrete from Fiberlogy. The Fiberlogy team was so nice to send us some samples of their filaments and…
Wydruk około 2,76 €–3,37 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 4,47 €–5,46 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 10,64 €–13,01 € nettoWstępna wycena jednego wariantu
Overview: Does not slip, even under decent pulling force Fits poles with a diameter of 6-~16mm Ring for securing the plant has a diameter of ~25mm Uses very little material I needed a clip to secure my tomatoes to a stick, but all the…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This amazing design looks to be witchcraft, something pulled from the mystical realms of Harry Potter. It uses “tension integrity”, known as “tensegrity” to create a pot that floats, suspended in mid air. The perfect addition to any…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
A simple design with a very characteristic feature of a hexagonal pattern on its exterior. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Wydruk około 2,00 €–2,44 € nettoWstępna wycena jednego wariantu
Strong and robust support for climbing plants. As it is stackable, it can be reached at any height. Print at 100% infill for greater strength
Wydruk około 2,75 €–3,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
UPDATES 02/03/2024: STEP files added The idea of this print is to have plantes suspended in the edges of the aquarium, having only the roots sumerged in the water. The model has 2 pieces, the ring that is fixed by pressure on the edge of…
Wydruk około 7,24 €–8,85 € nettoWstępna wycena jednego wariantu
A sci-fi cubic plant pot or planter for your plants. The design is inspired by the amazing Subnautica series! Mainly by the Precursor structures. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2…
Wydruk około 2,30 €–2,81 € nettoWstępna wycena jednego wariantu
This bookmark features the leaves and flowers of the tradescantia , which is also known as the wandering jewel, inchplant, or dayflower. (I think it's probably tradescantia zebrina .) I originally designed this as a gift for my friend ,…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
Simple yet very designful plant pot inspired by the structure of a greek column. A new design series called Ancient design is here! - there will be more such pots in the future - let us know what do you think about it! Vase mode print…
Wydruk około 3,19 €–3,90 € nettoWstępna wycena jednego wariantu
A moder take on the tradicional star plant pot - will fit your plants and interior beautifuly! Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2 or 3 outter perimeters - for a stroneger print)…
Wydruk około 1,12 €–1,36 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Wydruk około 6,00 €–7,33 € nettoWstępna wycena jednego wariantu
A simple seashell inspired plant pot - it is a part of the seashell collection available in our club. https://www.printables.com/model/748447-seashell-collection-plant-pot-vase-and-bowl-vase-m Print information: Recommended vase mode or…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena jednego wariantu
A simple low-poly design of a rhombus structure pot. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
Wydruk około 2,06 €–2,51 € nettoWstępna wycena jednego wariantu
If you're looking for my Bambu print profiles, they're at MW . If you're looking for my Bambu print profiles for version 2 , they're here. Update (10/2025): There is now a version 2 of the Plant Stem Support ! Now this doesn't mean this…
Wydruk około 0,49 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The pot is inspired by the structure of old fashioned crystal chandeliers. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Wydruk około 3,48 €–4,25 € nettoWstępna wycena jednego wariantu
Update 2024-01: I finally realized why some users were complaining about the bad dimensions. It was meant for folding with the grooves out and the smooth side in. If you do it the other way around, it bends less and doesn't fit into the…
Wydruk około 3,05 €–3,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
~ Design collaboration with Azurefilm ~ A biological plant pot design for all the nature science lovers out there! Used Filament: This model was printed using Sage HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
Meet the Articulated Jack-O’-Lantern Buddy – a fun Halloween-themed figure with posable legs and cute little arms. Use tree supports with back seam position. ✅ 70 mm tall ✅ Articulated legs for playful posing ✅ Perfect Halloween…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Wydruk około 17,13 €–20,94 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 6,50 €–7,95 € nettoWstępna wycena jednego wariantu
Spring is approaching, and I wanted to refresh my plants, so here's a new take on the butt planter ! I recommend printing with supports (on the build plate only) because the raised base allows for drainage. The planter is 149x122x131 mm…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wide plant pot I designed for my avocados at Prusa office. Small hexagon pattern on the top to make it a bit interesting and better fit the office. Print instructions If you print the version without holes and want to make it watertight,…
Wydruk około 3,26 €–3,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A new entry into the geometric plant pot series. And yes... We really like pineapples. Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena jednego wariantu
I used Fusion 360 to design a Strawberry Pot, then 3D Printing to bring it to life. I'm going to grow some of my own food, and I LOVE strawberries! Learn how to make it yourself, just watch my tutorial! Print instructions This will fit a…
Wydruk około 13,14 €–16,07 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 9,39 €–11,48 € nettoWstępna wycena jednego wariantu
This is the fourth of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
A simple and easy to print vase mode pot and planter for your plants. Best to print using dubble layered vase mode settings, using any filament you want. Happy printing :D
Wydruk około 1,59 €–1,95 € nettoWstępna wycena jednego wariantu
Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
Fits 6.5cm (diameter) x 5.5cm (height) planter.
Wydruk około 7,30 €–8,92 € nettoWstępna wycena jednego wariantu
Simple and easy to print - Looks great in a modern interior. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
Wydruk około 1,82 €–2,22 € nettoWstępna wycena jednego wariantu
A very simple yet beautiful design for a geometrical plant pot. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 2,49 €–3,04 € nettoWstępna wycena jednego wariantu
RIDGID Tools Double 18V Battery Holder Simple battery holder for storage of your RIDGID batteries while not in use. Batteries slide in and out with ease while maintaining enough grip and stability to keep them secure. The fit is snug and…
Wydruk około 7,36 €–8,99 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 7,59 €–9,28 € nettoWstępna wycena jednego wariantu
Castle Greyskull Planter
Wydruk około 26,93 €–32,92 € nettoWstępna wycena jednego wariantu
A simple yet very decorative design flower pot inspired by the structure of multiple intersecting crystals. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outter…
Wydruk około 2,14 €–2,61 € nettoWstępna wycena jednego wariantu
This planter was designed to hold succulent/indoor plants, and does not have any drainage holes. The design can be resized to fit your needs, but the entire design by default is around 100 mm x 120 mm x 105 mm. In the pictures, the…
Wydruk około 5,90 €–7,22 € nettoWstępna wycena jednego wariantu
It's a heavy-duty construction with additional holes to have tie-downs too. 4 of them can stack up to 0.5m. If you scale it up then, the sky is the limit! Commercial printing license: A US$15 one-time license to make and sell physical…
Wydruk około 3,90 €–4,77 € nettoWstępna wycena jednego wariantu
An Simple modern plant pot and planter for your plants. Inspired by an elegant crystal structure. Best to be printed in 2 or 3 layer vase mode settings - Printing material PLA or ASA Happy printing!
Wydruk około 1,45 €–1,78 € nettoWstępna wycena jednego wariantu
We are for sure big fans of crystal structures here! So… Here is our newest model inspired by the great growths of Moon Crystals! We hope you enjoy it! Used Filament: This model was printed using ROSA 3D PLA-Silk Navy Blue The ROSA 3D…
Wydruk około 9,83 €–12,01 € nettoWstępna wycena jednego wariantu
Twisted Lantern Lampshade Lampshade for E14 lamp socket or vase cover. Printing: The lampshade was printed with one perimeter in vase mode. The light mount adapter is also printed in vase mode. For E14 socket a negative volume was…
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
Comes with generous drainage.
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An interpretation of a cell-based robot organism. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated. Nozzle 0.4-1.0mm Layer Height 0.3-0.6mm (Recommended) Infill 5% No supports needed Scale it as you like :)
Wydruk około 15,69 €–19,17 € nettoWstępna wycena jednego wariantu
Ribbon shaped plant pot- great for vase mode printing. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
Wydruk około 3,80 €–4,64 € nettoWstępna wycena jednego wariantu
A simple floor pattern inspired plant pot Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower layer…
Wydruk około 2,50 €–3,06 € nettoWstępna wycena jednego wariantu
Gems all around - this pot design is inspired by the structure of games. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Wydruk około 3,27 €–3,99 € nettoWstępna wycena jednego wariantu
A simple yet very creative design. Fits great into modern interiors! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Wydruk około 3,58 €–4,38 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Wydruk około 7,94 €–9,70 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint in support, use .3mf file)
Wydruk około 5,93 €–7,25 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 9,27 €–11,33 € nettoWstępna wycena jednego wariantu
This spiral design is inspired by other pots online, and the casting idea is based off a YouTube video I saw. You can print the pot itself and use it as is. If you want to cast this out of concrete or plaster, then you need to print out…
Wydruk około 14,34 €–17,53 € nettoWstępna wycena jednego wariantu
Simple yet very designful and unique plant pot inspired by the great Odyssey by Homer. Printing information: 1. Regular print: Use pot files. The models are ready to print with starter prusaslicer settings. The print is divided into two…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena jednego wariantu
A simple yet very effective plant pot for your home. The design is inspired by the structure of an ancient column. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
The Criss Cross planter a neat design that will make your succulent the center of any table. The interior hole is 50 mm (~1.97 in)
Wydruk około 16,59 €–20,28 € nettoWstępna wycena jednego wariantu
A gentle summer breeze caught in a moment of silence - simple and beautiful. This plant pot is inspired by a very simple way of showing moving air. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…
Wydruk około 2,82 €–3,45 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Wydruk około 8,11 €–9,91 € nettoWstępna wycena jednego wariantu
A friend's young son has just had a cochlear implant put in, at their request, I designed and printed this model of the external components to be attached to a favourite teddy-bear to help B increase his confidence with this amazing…
Wydruk około 0,96 €–1,18 € nettoWstępna wycena jednego wariantu
Sealant/Silicon Cartridges Cap Print in pla in 0.25mm
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
A simple yet very decorative design flowerpot inspired by the structure of multiple intersecting crystals. Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
*** New collection of 8 plant pots - https://www.prusaprinters.org/prints/127174-plant-pot-collection *** The "Florence" plant pot / planter is 7cm in diameter and 6cm in height. The design is a solid shape, giving more freedom for wall…
Wydruk około 2,09 €–2,56 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 6,33 €–7,73 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint in support, use .3mf file) Scale it as you like :)
Wydruk około 12,07 €–14,75 € nettoWstępna wycena jednego wariantu
MMU remix Costa Atlantica cruise ship
Wydruk około 19,19 €–23,46 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 6,99 €–8,55 € nettoWstępna wycena jednego wariantu
A simple yet elegant plant pot inspired by the glamour style of the early 20's. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
Wydruk około 3,56 €–4,35 € nettoWstępna wycena jednego wariantu
A pot crafted by accident that turned dark… Nah it is just a regular plant pot, but it looks pretty cool! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
Wydruk około 4,18 €–5,11 € nettoWstępna wycena jednego wariantu
A simple design inspired by modern lamp shade structures. Used Filament: This model was printed using Off-White HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us some samples of their filaments, and we had the…
Wydruk około 2,79 €–3,41 € nettoWstępna wycena jednego wariantu
These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. A single piece/print design of the…
Wydruk około 3,14 €–3,83 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 8,10 €–9,90 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (paint-on supports) Scale it as you like :)
Wydruk około 20,36 €–24,89 € nettoWstępna wycena jednego wariantu
Modern self-watering plant pot with water level indicator. All you need for the float is a toothpick or wooden stick. The plate must be printed twice. I printed the float in PLA without infill so that it floats and doesn't sink.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Our grandchild has discovered that it is very cool to water indoor plants. The problem was that, all watering cans, we can find around us was too big for tiny hands. We googled to find some appropriate model to buy. We couldn't find…
Wydruk około 6,56 €–8,02 € nettoWstępna wycena jednego wariantu
Introducing the upgraded version of the self-watering planter design! This remix takes the original square design from Mikolas Zuza and improves upon it with fixes to the problematic outer and inner parts. With its self-watering feature,…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
