Counting matching models…
A new design inspired by the wind and sand of our planet (and other planets to). Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the…
Print approx. €6.26–€7.65 excl. taxPreliminary estimate for one variant
https://www.buymeacoffee.com/maxt ---------------------- Update log January 2024: Version 2 of the base has been uploaded, see below for more info SIZE The model will fit on Prusa Mini+ (180x180). Feel free to size it up or down as you…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
An anti-sphere inspired plant pot, giving it a very spacy and futuristic design loking like it is coming from the year 2148 ! Your plants will love it! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
I recently watched Game of Thrones and it inspired me to create such a designe - we hope you like it! Looks great in modern interiors, fits all plants well. Best to print in 2 or 3 layered vase mode settings. Works with most filaments.…
Print approx. €2.47–€3.01 excl. taxPreliminary estimate for one variant
A set of leaf coasters and decorative holders. These coasters will catch the condensation from your glass and you can use it to water your plants! Nothing quite like free water, right? When you're done with the coaster, plug it back into…
Print approx. €1.51–€1.84 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €12.16–€14.86 excl. taxPreliminary estimate for one variant
~ Design collaboration with Azurefilm ~ A nature inspired plant pot! We hope you enjoy it as much as we did design it! Used Filament: This model was printed using Sage HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us…
Print approx. €2.77–€3.39 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed Scale it as you like :)
Print approx. €7.51–€9.18 excl. taxPreliminary estimate for one variant
A simple design with a very characteristic feature of an inverted hexagonal pattern on its exterior Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters…
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant
A nice tradicional pot and planter for plants or flowers. Best to be printed in 2 or 3 layered vase mode settings - material: PLA Happy printing! :D
Print approx. €1.52–€1.86 excl. taxPreliminary estimate for one variant
A simple mosaic inspired geometrical plant pot for your house plants! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Easy-to-print flower pot with a simple and modern design. No supports needed. The planter can be resized according to your preferences, either enlarged or reduced as necessary. This design is easily printable.
Print approx. €8.28–€10.12 excl. taxPreliminary estimate for PETGSource material: PET
If you're running late with your Halloween decoration or just don't want to use up half a spool of filament for a decent sized pumpkin then these models were made for you! I've designed these Jack-o'-lanterns as a late entry for the…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed (Print the pipe upside down) Scale it as you like :)
Print approx. €7.83–€9.56 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
Print approx. €7.23–€8.83 excl. taxPreliminary estimate for one variant
A quite unique 80's style plant pot design inspired by the amazing film called The shining! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Print approx. €2.20–€2.68 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €6.22–€7.60 excl. taxPreliminary estimate for one variant
A simple yet modern design of a distorted plant pot. Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
Print approx. €0.73–€0.89 excl. taxPreliminary estimate for one variant
🏆 Thrilled to share that I've been nominated for Platform Designer of the Year at the 3D Printing Industry Awards 2026! If you enjoy this model, I would be incredibly grateful for your vote. [Click here to vote for Thorin Oakenshield]…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
A lovely gift from the bottom of your heart. A plant pot fit for Valentine's Day. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant
The original hexagonal vase more planter is one of my most popular planters. I see the appeal… the 3D printing community loves hexagons. But it always bothered me that it prints in two pieces, making it not a true vase mode model. So I am…
Print approx. €4.77–€5.84 excl. taxPreliminary estimate for one variant
Let me share with you another design of a poke-planter. Suitable for growing succulents, microgreens, or small houseplants. I hope this will brighten someone's day. I will be happy to see your prints and your "hairstyle" variants, so…
Print approx. €4.11–€5.03 excl. taxPreliminary estimate for one variant
This plant support cage is designed with an open side so that you can more easily add it around plants that have already grown, allowing you to more gently add support for leaves, fruits, and vegetables without stressing the branches .…
Print approx. €2.32–€2.84 excl. taxPreliminary estimate for one variant
A simple design that everyone could enjoy. Inspired by a simple wave structure. Used Filament: This model was printed using PLA MINERAL Concrete from Fiberlogy. The Fiberlogy team was so nice to send us some samples of their filaments and…
Print approx. €2.76–€3.37 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €4.47–€5.46 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €10.64–€13.01 excl. taxPreliminary estimate for one variant
Overview: Does not slip, even under decent pulling force Fits poles with a diameter of 6-~16mm Ring for securing the plant has a diameter of ~25mm Uses very little material I needed a clip to secure my tomatoes to a stick, but all the…
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
A simple design with a very characteristic feature of a hexagonal pattern on its exterior. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant
Strong and robust support for climbing plants. As it is stackable, it can be reached at any height. Print at 100% infill for greater strength
Print approx. €2.75–€3.37 excl. taxPreliminary estimate for PETGSource material: PET
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Print approx. €6.74–€8.24 excl. taxPreliminary estimate for one variant
UPDATES 02/03/2024: STEP files added The idea of this print is to have plantes suspended in the edges of the aquarium, having only the roots sumerged in the water. The model has 2 pieces, the ring that is fixed by pressure on the edge of…
Print approx. €7.24–€8.85 excl. taxPreliminary estimate for one variant
A sci-fi cubic plant pot or planter for your plants. The design is inspired by the amazing Subnautica series! Mainly by the Precursor structures. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 2…
Print approx. €2.30–€2.81 excl. taxPreliminary estimate for one variant
This bookmark features the leaves and flowers of the tradescantia , which is also known as the wandering jewel, inchplant, or dayflower. (I think it's probably tradescantia zebrina .) I originally designed this as a gift for my friend ,…
Print approx. €0.24–€0.29 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Print approx. €6.00–€7.33 excl. taxPreliminary estimate for one variant
A simple seashell inspired plant pot - it is a part of the seashell collection available in our club. https://www.printables.com/model/748447-seashell-collection-plant-pot-vase-and-bowl-vase-m Print information: Recommended vase mode or…
Print approx. €1.43–€1.74 excl. taxPreliminary estimate for one variant
A simple low-poly design of a rhombus structure pot. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
Print approx. €2.06–€2.51 excl. taxPreliminary estimate for one variant
If you're looking for my Bambu print profiles, they're at MW . If you're looking for my Bambu print profiles for version 2 , they're here. Update (10/2025): There is now a version 2 of the Plant Stem Support ! Now this doesn't mean this…
Print approx. €0.49–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
The pot is inspired by the structure of old fashioned crystal chandeliers. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Print approx. €3.48–€4.25 excl. taxPreliminary estimate for one variant
Update 2024-01: I finally realized why some users were complaining about the bad dimensions. It was meant for folding with the grooves out and the smooth side in. If you do it the other way around, it bends less and doesn't fit into the…
Print approx. €3.05–€3.72 excl. taxPreliminary estimate for PETGSource material: PET
~ Design collaboration with Azurefilm ~ A biological plant pot design for all the nature science lovers out there! Used Filament: This model was printed using Sage HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us…
Print approx. €2.12–€2.59 excl. taxPreliminary estimate for one variant
Meet the Articulated Jack-O’-Lantern Buddy – a fun Halloween-themed figure with posable legs and cute little arms. Use tree supports with back seam position. ✅ 70 mm tall ✅ Articulated legs for playful posing ✅ Perfect Halloween…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Print approx. €17.13–€20.94 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €6.50–€7.95 excl. taxPreliminary estimate for one variant
Spring is approaching, and I wanted to refresh my plants, so here's a new take on the butt planter ! I recommend printing with supports (on the build plate only) because the raised base allows for drainage. The planter is 149x122x131 mm…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for PETGSource material: PET
In the area that I live, various attachments, such as spray heads, for commonly used drinking water bottle can be found in shops. Hence, I was inspired to make a spout attachment for watering plants. I took the easy way in designing this…
Print approx. €3.23–€3.95 excl. taxPreliminary estimate for one variant
Wide plant pot I designed for my avocados at Prusa office. Small hexagon pattern on the top to make it a bit interesting and better fit the office. Print instructions If you print the version without holes and want to make it watertight,…
Print approx. €3.26–€3.99 excl. taxPreliminary estimate for PETGSource material: PET
A new entry into the geometric plant pot series. And yes... We really like pineapples. Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples, and we had the…
Print approx. €2.57–€3.14 excl. taxPreliminary estimate for one variant
I used Fusion 360 to design a Strawberry Pot, then 3D Printing to bring it to life. I'm going to grow some of my own food, and I LOVE strawberries! Learn how to make it yourself, just watch my tutorial! Print instructions This will fit a…
Print approx. €13.14–€16.07 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €9.39–€11.48 excl. taxPreliminary estimate for one variant
This is the fourth of six ship models designed to extend and enlarge the Atlantis project. It is a small kit and does not require any glue. It fits together and to the Atlantis model by mere friction. Video about the project is here:
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…
Print approx. €1.79–€2.19 excl. taxPreliminary estimate for one variant
Fits 6.5cm (diameter) x 5.5cm (height) planter.
Print approx. €7.30–€8.92 excl. taxPreliminary estimate for one variant
Simple and easy to print - Looks great in a modern interior. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
Print approx. €1.82–€2.22 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €2.49–€3.04 excl. taxPreliminary estimate for one variant
RIDGID Tools Double 18V Battery Holder Simple battery holder for storage of your RIDGID batteries while not in use. Batteries slide in and out with ease while maintaining enough grip and stability to keep them secure. The fit is snug and…
Print approx. €7.36–€8.99 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €7.59–€9.28 excl. taxPreliminary estimate for one variant
This planter was designed to hold succulent/indoor plants, and does not have any drainage holes. The design can be resized to fit your needs, but the entire design by default is around 100 mm x 120 mm x 105 mm. In the pictures, the…
Print approx. €5.90–€7.22 excl. taxPreliminary estimate for one variant
It's a heavy-duty construction with additional holes to have tie-downs too. 4 of them can stack up to 0.5m. If you scale it up then, the sky is the limit! Commercial printing license: A US$15 one-time license to make and sell physical…
Print approx. €3.90–€4.77 excl. taxPreliminary estimate for one variant
An Simple modern plant pot and planter for your plants. Inspired by an elegant crystal structure. Best to be printed in 2 or 3 layer vase mode settings - Printing material PLA or ASA Happy printing!
Print approx. €1.45–€1.78 excl. taxPreliminary estimate for one variant
We are for sure big fans of crystal structures here! So… Here is our newest model inspired by the great growths of Moon Crystals! We hope you enjoy it! Used Filament: This model was printed using ROSA 3D PLA-Silk Navy Blue The ROSA 3D…
Print approx. €9.83–€12.01 excl. taxPreliminary estimate for one variant
Twisted Lantern Lampshade Lampshade for E14 lamp socket or vase cover. Printing: The lampshade was printed with one perimeter in vase mode. The light mount adapter is also printed in vase mode. For E14 socket a negative volume was…
Print approx. €1.30–€1.59 excl. taxPreliminary estimate for one variant
Comes with generous drainage.
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for PETGSource material: PET
An interpretation of a cell-based robot organism. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower…
Print approx. €2.01–€2.45 excl. taxPreliminary estimate for one variant
Ribbon shaped plant pot- great for vase mode printing. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
Print approx. €3.80–€4.64 excl. taxPreliminary estimate for one variant
A simple floor pattern inspired plant pot Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower layer…
Print approx. €2.50–€3.06 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Print approx. €13.51–€16.51 excl. taxPreliminary estimate for one variant
Gems all around - this pot design is inspired by the structure of games. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Print approx. €3.27–€3.99 excl. taxPreliminary estimate for one variant
A simple yet very creative design. Fits great into modern interiors! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Print approx. €3.58–€4.38 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Print approx. €7.94–€9.70 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint in support, use .3mf file)
Print approx. €5.93–€7.25 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €9.27–€11.33 excl. taxPreliminary estimate for one variant
This spiral design is inspired by other pots online, and the casting idea is based off a YouTube video I saw. You can print the pot itself and use it as is. If you want to cast this out of concrete or plaster, then you need to print out…
Print approx. €14.34–€17.53 excl. taxPreliminary estimate for one variant
Simple yet very designful and unique plant pot inspired by the great Odyssey by Homer. Printing information: 1. Regular print: Use pot files. The models are ready to print with starter prusaslicer settings. The print is divided into two…
Print approx. €1.46–€1.78 excl. taxPreliminary estimate for one variant
A simple yet very effective plant pot for your home. The design is inspired by the structure of an ancient column. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for one variant
The Criss Cross planter a neat design that will make your succulent the center of any table. The interior hole is 50 mm (~1.97 in)
Print approx. €16.59–€20.28 excl. taxPreliminary estimate for one variant
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for one variant
A gentle summer breeze caught in a moment of silence - simple and beautiful. This plant pot is inspired by a very simple way of showing moving air. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…
Print approx. €2.82–€3.45 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Print approx. €8.11–€9.91 excl. taxPreliminary estimate for one variant
A friend's young son has just had a cochlear implant put in, at their request, I designed and printed this model of the external components to be attached to a favourite teddy-bear to help B increase his confidence with this amazing…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for one variant
Sealant/Silicon Cartridges Cap Print in pla in 0.25mm
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for one variant
*** New collection of 8 plant pots - https://www.prusaprinters.org/prints/127174-plant-pot-collection *** The "Florence" plant pot / planter is 7cm in diameter and 6cm in height. The design is a solid shape, giving more freedom for wall…
Print approx. €2.09–€2.56 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Print approx. €6.33–€7.73 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint in support, use .3mf file) Scale it as you like :)
Print approx. €12.07–€14.75 excl. taxPreliminary estimate for one variant
MMU remix Costa Atlantica cruise ship
Print approx. €19.19–€23.46 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €6.99–€8.55 excl. taxPreliminary estimate for one variant
A simple yet elegant plant pot inspired by the glamour style of the early 20's. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
Print approx. €3.56–€4.35 excl. taxPreliminary estimate for one variant
A pot crafted by accident that turned dark… Nah it is just a regular plant pot, but it looks pretty cool! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
Print approx. €4.18–€5.11 excl. taxPreliminary estimate for one variant
A simple design inspired by modern lamp shade structures. Used Filament: This model was printed using Off-White HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us some samples of their filaments, and we had the…
Print approx. €2.79–€3.41 excl. taxPreliminary estimate for one variant
These parts are designed to use a few solid layers on the bottom and then a continuous and unbroken profile all the way up the part. Prusa and Slic3r call this vase mode, while Cura calls it spiralize. A single piece/print design of the…
Print approx. €3.14–€3.83 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Print approx. €8.10–€9.90 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (paint-on supports) Scale it as you like :)
Print approx. €20.36–€24.89 excl. taxPreliminary estimate for one variant
Modern self-watering plant pot with water level indicator. All you need for the float is a toothpick or wooden stick. The plate must be printed twice. I printed the float in PLA without infill so that it floats and doesn't sink.
Print approx. €0.15–€0.18 excl. taxPreliminary estimate for one variant
Our grandchild has discovered that it is very cool to water indoor plants. The problem was that, all watering cans, we can find around us was too big for tiny hands. We googled to find some appropriate model to buy. We couldn't find…
Print approx. €6.56–€8.02 excl. taxPreliminary estimate for one variant
Introducing the upgraded version of the self-watering planter design! This remix takes the original square design from Mikolas Zuza and improves upon it with fixes to the problematic outer and inner parts. With its self-watering feature,…
Print approx. €0.37–€0.45 excl. taxPreliminary estimate for one variant
A simple yet very decorative design flowerpot inspired by the structure of multiple intersecting crystals. Print information: Recommended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer…
Print approx. €1.89–€2.32 excl. taxPreliminary estimate for one variant
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-on-Support) Scale it as you like :)
Print approx. €6.26–€7.65 excl. taxPreliminary estimate for one variant
The pot is inspired by the structure of another old fashioned crystal chandeliers. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
Print approx. €2.06–€2.51 excl. taxPreliminary estimate for one variant
PLA; filling 15%; 0,15 mm Quality; No supports; Remixed oddish planter, drip plate are attached.
Print approx. €5.31–€6.49 excl. taxPreliminary estimate for one variant
Scalable Design I designed this 5" self-watering planter insert to easily be scaled up and down for different pot types. Simply measure your pot diameter and set the dimensions in your slicer. The design is 5"x5"x5" which makes it easy to…
Print approx. €6.17–€7.54 excl. taxPreliminary estimate for one variant
