Liczymy pasujące modele…
Tips are appreciated and go towards creating new designs README I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and <3/4'' / 18.9mm diameter. Just check my uploads and find the set you'll need. This is the 19.9mm set…
Tips are appreciated and go towards creating new designs README I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and <3/4'' / 18.9mm diameter. Just check my uploads and find the set you'll need. This is the 20.0mm set…
Tips are appreciated and go towards creating new designs README I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and <3/4'' / 18.9mm diameter. Just check my uploads and find the set you'll need. This is the 19.0mm set…
*05.12.2024 I just noticed that on the rear part of the Long Levers, some dimensions are too tight/ not how i want them
Improved large levers and switch addons for the Logitech/Saitek Throttle Quadrant. Inspired by Diamond DA62. Print the levers twice for Twin Engine, Small Lever can be used for brake or speedbrake. Optional Switch addons (for flaps, gear,…
Mag release lever replacing the standard button on the Nerf Stryfe. There are two versions, a short and an extended one. STEP-Files are included. Print Settings Supports: No Infill: 20% Notes: If you experience many blobs on the surface…
Tips are appreciated and go towards creating new designs README I have created this set with dogs of 20.0mm, 19.9mm, ~3/4'' / 19.0mm and <3/4'' / 18.9mm diameter. Just check my uploads and find the set you'll need. This is the 18.9mm set…
A simple interactive steering wheel for toddlers. Printable without supports. Fittable to popular BabyBjorn bouncer. Assembly with superglue, paintable with toy-safe acrylic paints (european standard EN 71-3) As safety cannot be…
I didn't have the bed space to make it larger, else I would have made the rear angle larger to better contact the rear firewall. Inspired by: Miata Fuel Pull Cover (NA) thing:4545328 josh7owens Print using a skirt (preferably) and tree…
I printed the speedbrake vertically, narrow end to the plate with no supports and a brim for stability. I printed the two throttle levers horizontally with the round part of the knob of the plate. With supports for the stem. I printed the…
Use MTB bleed kits to bleed road levers. Print in whatever material and whatever precision give you a suitably well-formed threads, preferably in some material that is much softer than the material of the Shimano road levers. Install a…
UPDATE 2026/07/02: Consider this instead: I find the original a bit tight/tough to dispense all cards in the stack, also there's not enough space to identify and pick a card. My solution, dispense half the stack on one side. I have to…
Filter holder adapter to allow the Lazy Spa style filters to be used with the CleverSpa brand Inflatable Spas. More robust holder plus far cheaper refills. I printed it in PETg for a friend but would probably be ok in PLA too And no, I…
Ever wanted to use realistically modelled PA-28 controls for your Honeycomb Bravo Throttle Quadrant? Or maybe you want well made controls with larger and more comfortable knobs than the stock GA ones? Perhaps you often fly in VR and find…
Little version of my previous iPhone 14 stand with charging. Wallmounted
Made for TryOne uincycle school, but there is also a blank version. Printing from PETG and at higher temperatures than usual is recommended for stronger result. Use 8 perimeters.
I have Shimano disc brakes with BL-M315 brake levers. The levers were loose and rattling, metal on metal, every time I hit any bump. I designed these simple spacer shims to reduce the looseness and unwanted rattle. They fit the M315…
Here I present you a customizable, modular CD holder with ejection levers. I am including a pre-assembled STL with slots for 8 CDs, but it is just an example. This is a modular system consisting of four (+1) separate parts. Full CAD files…
Thanks to @NotSure for their work, sharing and original idea ;)
Questo modello rappresenta due figure umane stilizzate con un cuore centrale, simbolizzando l'unione e l'amore. Uso Ideale come ornamento per la casa, regalo per persone speciali o decorazione in occasione di feste romantiche. Consigli di…
Mag release lever replacing the standard button on the Nerf demolisher. There are two versions, a short and an extended one. STEP-Files are included. Print Settings Supports: No Infill: 20% Notes: If you experience many blobs on the…
These are replacement "levers" for the sliders on the T16 and TX16S. Not being a fan of the short stock ones when using them for pan and tilt on my FPV planes, I wanted something longer. Andrew Newton posted a design for some thicker ones…
A set of robust, interlocking bicycle tire levers designed for 3D printing. The levers clip together for compact storage and easy transport. I’ve successfully tested them on my own road bike, and they handled tight tires without any…
These are two different designs that are meant to go over the standard knobs used on Losmandy telescope mounts (i.e. G11, G8, etc.) in order to help with comfort and leverage, particularly during loosening. Especially during the winter…
This volcanic basalt terrain set is made to be compatible with DutchMogul's Meepleverse. If you aren't familiar with it, you can find it on Ill Gotten Games' Patreon page: https://www.patreon.com/illgottengames/posts . It's amazing stuff,…
I decided I needed some small stargates and compatible terrain bases for my Meepleverse kit, so I designed these. The bases use the texture from my desert temple set, but I've printed them with marble PLA. The Stargates fit in nicely,…
Remix of the "Clipsable levers for Wago box" (https://www.printables.com/model/1292776-clipsable-levers-for-wago-box)Remix of the "Clipsable levers for Wago box" (https://www.printables.com/model/1292776-clipsable-levers-for-wago-box).…
Unlike other printable doorknob levers, these must be sized to fit to the knob and glued in place permanently. The method of attachment does not leave the printed part under constant mechanical stress; consequently, it's less susceptible…
First release of an adjustable silicon glue/ zip tie mountable brake switch holder for kw12 micro switches ( buy here: https://www.ebay.de/itm/183765013263 ) I tried it's fit on a Shimano, Meroca and a Zoom brake levers, if you try on…
Press Like for encouragement. Comment for improvement. Left side or right side. 3 sizes: 11 cm, 8 cm or 5 cm. I suggest printing it sideway in PLA with at least 90% infill.
Replacement part KlickFix Riegel Levers Oversize Ø 15–20 mm It is used for UniKlip 2 / KorbKlip 2 on bikes with oversized trunk profiles. Recommended to be printed using PETG.
Parking levers or Paws are used to decouple toolhead from the white rabbit. Designed for Flashforge Creator Pro frame. While this design works great! The parking levers have been superseded by the Akula-class motion system.
Since these simple things apparently have to cost an arm and a leg on the open market I quickly drew some up myself. Your printer should be fairly accurate for the internal thread, but if it doesn't fit you can use your slicer's…
I'm a bit of a plant collector in real life, so I decided to bring some of that love of variation and diversity into my creations for use with Meepleverse. Included are three different variations of non-fruiting (or flowering) shrubbery…
I was in need of some more sci-fi doors for my Meepleverse set, so I remixed these two tech door inserts from DutchMogul's Wayfarer Modular Scifi Gaming Tiles: Core Set. I was taken by the original here on Thingiverse so I resized and…
Augmented Reality is the technology that makes possible to overlay content on the real world. It can be provided for several type of devices: handheld (like mobile phones), headsets, desktop displays, and so on. For handheld devices (more…
I needed some lava and toxic waste for upcoming dungeon crawls and so I made these dual-sided terrain pieces which can be printed in translucent colors for a neat liquid effect. This terrain set is made to be compatible with DutchMogul's…
After installing SIP's dog-leg-style levers on my wife's Vespa, we realized the brake light switch wouldn't get depressed without some kind of extension. This piece gets epoxied in the underside of the level. The flat surface on the…
I was recently inspired by DevonJones's Boss Door post ( https://www.thingiverse.com/thing:4135980 ) and decided to make a minimalist take on the awesome sun door over there. This terrain set is made to be compatible with DutchMogul's…
After playing Bit Dungeon (one of my old favorite video games) I decided to make some little terrain bits that are inspired by the art in the game. This terrain set is made to be compatible with DutchMogul's Meepleverse. If you aren't…
DO NOT PRINT THIS MODEL!!!! I AM CURRENTLY FIXING SOME MAJOR ISSUES RELATED TO THIS MODEL!!! This is a combination of multiple models I created, and it showcases a class 1, 2, and 3 lever in an understandable way. This is great for…
I wanted to upgrade my new Gilles Tooling levers with custom color adjustment wheels. Kudos to Ralf from Gilles, who shared that the original ones are made from POM, so we can choose an adequate replacement. I would suggest PC or PETG if…
I have had a couple of boxes of mostly Chinese clones of Wago 222 splicing connectors (the kind you often see on Bigclive's channel), which I use for non-critical applications. I wanted to keep them sorted somehow, so I ended up printing…
Created for guinea pig enclosure after the originals broke.
Some beads of a couple of characters from me and my friends comic series with the three hats and the main villains masks
Best printed in ASA or PETG. If the fit is not tight enough the .SCAD file can be modified.
A set of three tyre levers for fixing a puncture. The thin tapered tip slides under the tyre bead, and the hook at the other end clips onto a spoke to hold the bead off the rim while you work along with the next lever. A hole lets you…
Whether you are looking for a quick trail-side spare, a custom color accent for your bike, or a more ergonomic two-finger pull, this model provides a drop-in replacement for the stock Talaria brake levers. ⚠ DISCLAIMER: Brakes are a…
WHO IT HELPS People who do not have the strength to press a key reliably: arthritis, ALS, muscular dystrophy, stroke survivors. Also people who type with a fist, a palm, a mouthstick or a typing stick, and low-vision users. HOW IT WORKS…
These are replacement gaskets for standard cam locks & levers found on a lot of rv's and campers. Printed in TPU 95. They have a .75 ID & 1.00 in OD. And come in three thicknesses: .060 no notches .045 1 notch .030 2 notches Thicker…
Best printed in ASA or PETG. If the fit is not tight enough the .SCAD file can be modified.
A set of robust, interlocking bicycle tire levers designed for 3D printing. The levers clip together for compact storage and easy transport. I’ve successfully tested them on my own road bike, and they handled tight tires without any…
I wanted to upgrade my new Gilles Tooling levers with custom color adjustment wheels. Kudos to Ralf from Gilles, who shared that the original ones are made from POM, so we can choose an adequate replacement. I would suggest PC or PETG if…
I printed the speedbrake vertically, narrow end to the plate with no supports and a brim for stability. I printed the two throttle levers horizontally with the round part of the knob of the plate. With supports for the stem. I printed the…
These are replacement gaskets for standard cam locks & levers found on a lot of rv's and campers. Printed in TPU 95. They have a .75 ID & 1.00 in OD. And come in three thicknesses: .060 no notches .045 1 notch .030 2 notches Thicker…
I've printed this with PLA but not sure how it'll hold up over time. It was designed for shimano road levers but may work on mountain as well. The fat end sits under the compression nut inside the lever where the barb and olive would be.
These are clamps to improve the hold of speed levers of the 22RE Toyota Engine ( https://www.thingiverse.com/thing:644933 ). References : https://www.thingiverse.com/thing:713815 https://www.thingiverse.com/thing:824415 Print instructions…
These are a couple levers for the KiMe kinetic sculpture by Noci. I had a lot of trouble getting the original levers to engage properly for my build, so I tried to modify them slightly. Often times, the front lever just wouldn't touch the…
Replacement levers for a washing machine hot and cold water control. Print Settings Printer: Qidi X-One 2 Rafts: No Supports: Yes Resolution: 0.08 Infill: 15 Filament: Hatchbox PLA Red Category: Replacement Parts
This lever frame is based on a typical British railway signalbox frame. Scale to be ~43mm long for 4mm:1ft (OO/EM/P4) scale. This frame is very fragile to print, it will require a resin based DLP or SLA printer. The support structure…
Replacement control levers for my CH Eclipse flight simulator yoke. They fit very tight on the potentiometers, are a little snug on the yoke frame. So far they work as good or better than originals. NOTE: The levers fit very tight on the…
Bicycle Tire Lever Holder for 4 Levers. Stack the levers and slide then through the opening. The levers are retained by spring tension. The STL file is oriented to print with no supports.
Broke both my fork lockout levers with my knee in a crash. These aren't perfect, but will do the job. The hole on the lower lever is meant for you to drive a 2mm screw into it and remove the head - easiest way to get a strong 2mm post. I…
These were made using itslitho lithophane maker. This is the link to their guide and website were you can also make your own lithophanes. Follow their printing guide and then go to cults 3d and buy their top and bottom models. The…
I have to admit, I was so excited to see some sci-fi elements compatible with the Meepleverse that I went and remixed one of Dutchmogul's old terrain sets that seemed perfect for use with Meepleverse. Changes are minimal-- I separated…
