Wyniki wyszukiwania: linkin

Blinking eyes owl wall key holder

I made this blinking eyes owl Wall Keychain for my mom who love owl. I took the idea from Amaz.. The first assembly is a bit tricky.

Linking Soot Sprites

Soot Sprites (in the style of the Barrel of Monkeys game) Characters seen in Studio Ghibli's Spirited Away as well as My Neighbor Totoro Double-sided (eyes on both sides) These can be played with like Barrel of Monkeys, or used as…

UFO Abduction Lamp with blinking lights

you need: glas cylinder with both ends open about 80mm in width 27x blue LEDs 3x white LEDs 30x 200 ohm resistors 4x 2k ohm resistors 4x 2N2222 transistor ARDUINO nano 5M ohm potentiometer 7V power supply green fabric Use transparent…

Blinking Cat Glasses

Just in time for Halloween, fashionable eye-wear to go with that feline/reptile/alien costume. Or if you are lazy, just these and a pair of chinos. Just rotate the outer ring on either side to open and close both irises. Prints with no…

Blinking Iris Goggles

Watch: These blinking goggles use a remix of my Print-In-Place Iris Box ( http://www.thingiverse.com/thing:1817180 ) which is a remix of emmett's Preassembled Iris Box ( http://www.thingiverse.com/thing:1811143 ). Right and left…

Linkin Park

Linkin Park

Key Holder with Blinking Owl

This model was created to add some flair to the amazing Blinking Eyes Owl model: https://www.printables.com/model/180339-blinking-eyes-owl-wall-key-holder. Refer to the original model for the Owl assembly. I have included an additional…

UFO Abduction Lamp with blinking lights

Version 2 of the lamp: https://cults3d.com/en/3d-model/home/ufo-lamp-oneidmonstr For this Version you need: glas cylinder with both ends open about 80mm in width 27x blue LEDs 3x white LEDs 30x 200 ohm resistors 4x 2k ohm resistors 4x…

Linkin Park From Zero Logo Keychain

Multimaterial Keychain from Linkin Park's new logo for the album From Zero. Fast easy print done in 47 min with the Prusa MK4. Settings: -0.15mm Quality -PLA -Support None -infill 25% -Layer change 3.80 Printer Used: Prusa MK4

Blinking owl - Keyslot backplate

I love the blinking owl key holder, but the original does not have a good way of attaching the part to the wall (except double-sided tape maybe). This is just a simple cutout for mounting with one small screw. Please note that the…

Linkin Park Logo

Hope you like it! You can paint it to get a multicolor model :)

Sabertooth blinking mask/ fursuit headbase

This object is licensed for PERSONAL USE ONLY . For commercial use contact me at instagram: @portallabs Materials: PETG / PCTG PP / PETG / PCTG for the flexures Very Important: Correct slicing orientations are specified in the…

Lampenschirm Linkin Park (Lito)

Ich wollte eine Lampe mit dem Gesicht von Chester Bennington haben. Da ich kleine gefunden habe, habe ich diese Entworfen. Bis auf die Druckqualität ( ich bin blutiger Anfänger) bin ich mit dem Ergebnis sehr zufrieden.

Linkin Park Coaster

TIP: print them upside down for a nice surface finish.

Nasal Activation by Snarling Amplification Blinking

OUTDATED!! Make the Blinking module featured in This instead: Nasal Activation by Snarling Amplification Blinking (NASA Blinking for short) Made by: Costescu Catalin Mihai (@portallabs on Instagram: Tag if you post this design somewhere…

Linkin Park Keychain (dual color compatible)

As a fan of Linkin Park and a 3D printing enthusiast I wanted a small token or keychain that I could carry with me in memory of Chester Bennington. So I came up with this, a small Linkin Park Logo Keychain. If you have a dual color…

Wall Mount for Blinking Eyes Owl

This is a wood textured wall mount for two Blinking Eye Owls https://www.printables.com/model/180339-blinking-eyes-owl-wall-key-holder designed by djedje_zr7 . I loved the owls, but wanted a way to mount them on the wall together. This is…

Linkin park logo

Linkin park logo

Linkin Park keychain collection

Keyrings with the different linkin park logos. There are two options for printing: Option 1: Multimaterial Option 2: Changing filament in the middle of the print, colour change (resolution 100%, layer height 0,2) on layer 14.

Linkin park Keychain

It's a keychain made from linkin park's logo. I think it looks best printed in two colors. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 0.2 Category: Keychains

Blinking eyes owl wall key holder SKADIS back

This is a remix of the loveley blinking owl's back plate to interface the Skadis System from IKEA. The back plate was scaled to 108% to make room to accept a Skadis hook. To print your version of the blinking owl you need the front plate,…

Baby Linking Rings/ C-Rings

I needed linking rings for my daughters toys so I designed these. They work great. They maintain their shape and flex enough to go around larger poles. I print them 100% to go over an inch rod and then print them at 75% for the rest of…

Linking Bracelet Holder Stand

This is a simple bracelet holder stand that can be patterned to hold as many bracelets as needed. Each stand has two arms to hold at least two bracelets, but I've found that as many as 4-5 bracelets can fit on a single arm. The stands can…

Linkin Park Hybrid Theory Logo

The STL locations should match up for easier editing! Make sure the Black is below white and white is below red. You only need about 2 layers of the artwork so scale the STLs to 0.4mm in height. The 3mf is for Bambu Studio or Orca Slicer.…

Linkin Park Streetsoldier

Scale it to whatever you want, once the base plate is finished change the filament for a cool two color print.

Linkin Park keychain

made a simple LP key chain, enjoy !

Evanescence/Linkin Park logo

Just a simple model for a necklace charm of my 2 favorite bands. Logo designed and created by me. Still a work in progress. May need to be resized depending on newds.

linkin park hybrid theory hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions: Start with red At layer #8 (0.72mm) swap to Black At layer #11 (0.96mm) swap to grey At layer #15 (1.28mm) swap to White for the rest.

LINKIN PARK KEYCHAIN

BEAUTIFUL LINKIN PARK KEYCHAIN FOR FANS OF THE ROCK BAND

Blinking Owl Gift Card

This is a gift card with a gear train to make the owl’s eyes blink and make an object move in the sky. By default, a cloud reveals the moon, but you can create your own creative background. It is set up, that you can 3D print the whole…

"Plinking" piano

I modeled this because i had come across the Printables contest for musical instruments. unfortunately it was 2 days before deadline. If you print the Key mech upside down, you can fit all parts on a 220x220 printer with ease, very little…

Linkin Park Spotify Code Keychain

This specific version is rather a sign than a key fob and it directs to the Linkin Park artist page on Spotify. As noted on the original page for the model, printing this in two colors is highly recommended.

Linkin Park Keychain (double sided)

Double sided key chain

Linkin Park Logo (just logo) & Logo with peg for placement on own designs

Linkin Park Logo You can find a suitable stand for this Logo here . Disclaimer: I do not own the copyrights to the logo. I just designed a 3D version for non-commercial use.

Linkin Park Key chain tag

Model printed with 0.12 layer height 100% infill Material is Wanhao PETG Printed on the Ender 3 S1

Linkin Park coaster

Its a two color coaster. Just add a pause in the middle of the print and change the filament Print Settings Printer Brand: Bambu Lab Printer: A1 **Resolution:** 0.2 Infill: 10% Category: Kitchen & Dining

Calibration linking cube

I was tired of printing the 20x20 cubes for calibration and then throwing away when done. So, I decided to create a cube that doubles as a linking block. since my son likes to make little robots out of the blocks we bought. The cube is…

NEW Linkin Park from zero coaster

its a coaster from the new logo of Linkin Park

Linkin Park Different Coasters

Logos of Linkin Park. I'm just happy to see them back :) File names ending with '.h' indicate that there is a model with a hole at the top. In lowing memoryre of Chester..

Lid with small hole for LoboCNC Blinking Cat Glasses

This is a remix of the lid piece of LoboCNC's Blinking Cat Glasses . Go to his page to download the remainder of the parts to make these glasses.

Linkin Park Keychain

Show off your love for rock and metal with this Linkin Park keychain , inspired by the iconic Hybrid Theory album . A perfect accessory for fans of Chester and Mike , it blends music and style into one must-have item. Ideal for backpacks,…

LINKIN PARK

logo linkin park

Linkin Park Coasters With Holder.

Hi, I made coasters with 8 different logo's of Linkin Park. they are 100mm in diameter. I also made a holder for the coasters with a TPU feet.

Blinking Light Win Replacement Tray

I purchased one of RetroGameRestore's clear NES shells and thought I'd play with the idea of having different color BlinkingLightWin trays to match a certain aesthetic. I recommend printing with normal supports, 5mm base pattern spacing,…

NEW Linkin Park Logo - Keychain

I was looking for a new logo keychain for a friend, but I couldn't find one so I made it myself.

Stand for Linkin Park Logo

Simple stand for Linkin Park Logo .

Linkin Park LOGO

Simple LP group logo

Linkin Park Keychain New Logo

Linkin Park Keychain with new Logo Its ready to be printed both sides 2 Colors if you have Bambu AMS or other multi color Printer.

Linkin Park - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 98x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap…

Linkin Park Logo Keychain

A simple Linkin Park logo Keychain Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 5 Filament: Artillery PLA Category: Signs & Logos

Linkin Park Fridge Magnet

Linkin Park Fridge Magnet - remix of Linkin Park Keychain Magnet hole is set to 16x2.5mm Recomend printing with filament change - gcode for Prusa MK3S attached in files.

Wall Mounted interlinking Spray Can Holder

Stop letting your spray cans roll around your workspace. This Modular Interlocking Spray Can Holder features a dovetail "chain-link" connection system that allows you to snap as many modules together as you want and expands to fit your…

linkin park Cookie Cutter

Customized version of https://www.thingiverse.com/thing:116582 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=116582 Instructions Using the following options: cookie_cutter_dimension = 130 wall_thickness…

Minimalistic Linkin Park Wallart, LP

A nice Looking Linkin Park wallart.

Linking Triangles

LinkingTriangles, made in TopMod3D. Category: Art

Linkin Park Chester Bennington - hueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Blue PLA+ Sunlu Sky Blue PLA+ Sunlu White PLA+ Sunlu Red PLA+ Sunlu Yellow PLA+…

LinkinPark KeyChain

Linkin Park Keychain. R.I.P Chester. Category: 3D Printing

Linkin Park Letters Standing

The Letters of the Band Linkin Park. Standing. good for Decoration.

Linkin Park Papercuts coaster

Just a little something about the release of Linkin Park's "best of" album Papercuts. Printable on MMU or standard layer change.

Linkin Park big 40x30 cm

CEdule Linkin park i s držákem

linkin park Lithophane

Customized version of https://www.thingiverse.com/thing:229961 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=229961 Instructions Using the following options: height = 2 size = 81 layer_height = 0.01…

LinkinPark

Linkinpark logo

Linkin Park Ornament

A linkin Park christmas ornament of the logo of july 2017 and the most recent one To make the dual color, just stop the print on the right layer and change de fillament Hope you like the desing Merry christmas

Blinking LED Heart, Blinkendes LED-Herz

Ich habe hier ein LED Herz erstellt und möchte das gern mit euch teilen. Es gibt zwei Versionen. Erste Version ist eine leichte Version die benötigt keine großen Fertigkeiten, ihr braucht lediglich 2x 3mm blink-LED vorzugsweise rot und…

Linkin Park, Meteora album cover model

A model cover of my all time favourite nu metal album meteora by Linkin Park

Linkind Flashing Jig

a flashing jig for the two button Linkind switch (ESP32 version) Use DuPont jumper wires for the pins. May have to make the holes a little bigger for them to fit. Remixed from https://www.thingiverse.com/thing:3439815

Linkin Park Decor

Linkin Park Decor

Miniature Block System - linking pieces

Use the 3 different types of blocks to create shapes & models. Let your imagination run wild as you explore how the different types can connect. You can also Remix this model to add your own custom shapes, and expand the possibilities for…

CASALI blinking lamp top cover

This is the lamp cover for the blinking light of an old CASALI gate. Print instructions Designed with Fusion 360. I have printed two small sample to check if it fits correctly before the final part.

Linkin Park podtácek (coaster)

[CZ] Model jsem tiskl na tiskárně a1 mini s ams lite. Pro lepší kvalitu loga umístěte model logem na podložku. Doporučuji tisk z petg pokud budete používat podtácky pod horké nápoje. Materiál: PETG DevilDesign Perimetr: 2 Výška vrstvy:…

Linkin park/21 pilots logo

can be printed in 2 colors for best effect resize to your liking

Blinking Christmas Tree with a different base

The Blinking Christmas tree was one of the first prints on my new Mendel90 machine, assembled from a kit of parts from Nophead - and it turned out VERY well indeed. However, I thought that I would make a change to the base so that it…

Health Bar Pixel Art Lamp Blinking

I created a pixel art lamp with a blinking half-heart. I will use it to stick on the inside of the car window and shine it outside. If you need the scheme I used, you can ask, but it's far from optimal.

Meteora Album Linkin Park

The Album cover of the album Meteora from Linkin Park.

Linking Park

Linking Park

Zápich do dortu Linkin Park / Cake topper

PetG

Minutes to Midnight Album Linkin Park

The Album cover of the album Minutes to Midnight from Linkin Park.

Jack: The 3D Printed, Blinking Jack-O'-Lantern

I wanted to make some sort of 3D printed, blinking LED Halloween project, so here's Jack. You can find a full project write-up on Hackster: https://www.hackster.io/BlitzCityDIY/jack-the-3d-printed-blinking-jack-o-lantern-6a9712 Project…

Ikea Curtain Rail Linking Clip

Used for linking Ikea Curtain rails. I Printed them using PLA but PETG/ABS would be right for long-term use.

Linking corners for DIY insect screen

Printed in white PLA, 5x wall, 10% gyroid infill

Fillable Plinking Target

Fillable target made for plinking. Target has a hollow center with fill hole on top.

CSLR Linking Ring Holder

A wearable holder for magicians. Designed in Hong Kong. Category: DIY

Heavys Headphones H1H Linkin Park

This is a Linkin Park Shell in HUEFORGE Style for Heavys Headphones H1H Here I have another Skadis holder for the shells. https://www.printables.com/model/1358532-heavys-headphones-h1h-shell-holder-for-skadis Here's another variant for…

Hybrid Theory Linkin Park

Multi color

sous verre linkin park

sous verre linkin park

LinkingStars

LinkingStars, made in TopMod3D. Based on this Tutorial: http://cliptic.wordpress.com/tutorials/ Category: Art

classic linking rings

the classic trick where it seems like the ring mege together and you can make your own routine

certified linkin park fan sign

the model is a sign about certified linkin park fan

Linkin Park Living Things Album

The Album Cover of the Album Living Things from Linkin Park.

Linkin Park Einkaufswagen Chip

Linkin Park Einkaufswagen Chip

Linking Fidget

This is a fidget That I put together in TinkerCad. Make Sure to print with supports.

Anycubic Kobra 3 Cover Linkin Park

Ein Linkin Park Cover für den Anycubic Kobra 3

Translucent spikes for Blinking-Muzzle

Translucent spikes, see github projekt and the drawing on onshape .

Bold Linkin & Unplugged: Bearing Press & Pull Set

Bearing press & pulling toolset for 72mm linkage bearings for Bold (Scott) MTB Linkin / Unplugged.

NMMiner Case (No screws, no blinking LED)

A replacement case for the NMMiner. Two plates that push together without screws. Front and Back plates retain access to the board like the original case. Designed for the 2.4 screen. Just push the screen into the front plate with the…

Bold Linkin & Unplugged - Special Tool Linkage (8 notches)

Linkin Park, Meteora inspired keychain(R.I.P Chester)

Made an keychain inspired by my all time favourite Nu Metal album by Linkin Park

Bracket for blinking LEDs and firmware for easier setup of clock

Based on the work from https://www.thingiverse.com/thing:5437453 Added a bracket for 2x 5mm LED bulbs in-between the minute and hour. Bulbs wire to the ESP chip. Here are the features I've added to the ESP firmware. -Using an ESP-12F…

A Thousand Suns Album Linkin Park

The Album Cover of A Thousand Suns from Linkin Park.

UV cross-linking device

This 3‑D printable mount is designed to hold a 0.5 mL Eppendorf tube (with a 50 µL sample in the cap) at a fixed, user‑defined distance from a Dymax RediCure UV‑LED wand. Sample positioning – The tube is seated on a recessed tray that…