Liczymy pasujące modele…
ATTENTION! THESE PIECES ARE ONLY TO BE USED BY THOSE EXPERIENCING DIFFICULTIES FITTING CERTAIN PIECES TOGETHER FROM MY ORIGINAL MASTER SWORD DESIGN! Hopefully not many of you will need these pieces, but more than a few people who have…
This model includes a few ways of printing: Two halves that need to be printed and glued onto each other the blade and hilt seperate from each other the blade and hilt seperate from each other BUT the hilt is split in two halves As a full…
You will have to glue on the appendages, so the handles and rivets. Superglue works great. Also check out the master sword: https://www.printables.com/model/288922-master-sword-tloz
These pieces are nearly 40 cm tall and have a very small footprint. I truly have to discourage you from attempting to print these. I created these files by request. Unless you have an incredible amount of confidence in your printer's…
LoZ Master Sword Plant Trellis 100% prints at approx. 7in tall, 0.2in thick. To create a larger (or smaller) trellis you can scale in the x-y while keeping the z-scale the same (as to avoid making it too thick or thin. No support or…
this is a small dinosaur toy. it is printed flat on the print bed and then assambled. notice the litle bump orientation in the main spine. it is recommended to check out this instructions short video: no support is needed. for me the…
I've had several requests for a single piece blade for my Master Sword design. This will be perfect for belt printers!
Red Bull 12floz and 8.4floz Cup Holders so they don't spill over in regular size cup holders. I took a road trip recently, and when I take a road trip, I drink Red Bull. I've taken a liking to the blueberry flavored and it only comes in…
Smoking is bad for you, so they keep saying. I'm not getting any younger and should probably stop. Which is difficult at the best of times but even worse if you're still enjoying it. I smoke roll-ups. Problem is that if I have the tobacco…
If you appreciate my work, consider supporting me by buying me a cup of hot chocolate! :) https://buymeacoffee.com/aleksandrs No one doubts the effectiveness of clinical simulation as a method of teaching future and existing medical…
Vybouchnutá jaderná elektrárna Černobyl, s odhaleným jádrem a víkem Janina. Když si všimnete detailů, najdete i palivové tyče. :D Podpěry nejsou třeba.
Joycon with triforce logo indentation. Better suited for resin printer, can be printed in FDM printer but sanding is required. It's design so that you can fill the indentation of the logo with UV resin to make it look like an inlay
We recently built a Crash Bandicoot Micro Blocks model kit, only to find that there was no base plate on which he could stand. That makes Crash more than a little unsteady on his feet. So what's a maker to do? I fired up SketchUp (yes,…
Base para Amiibo Custom de The Legend of Zelda preparada en 2 partes, con orificio para introducir una NFC Tag en el interior. En caso de querer imprimir una figura pegada a la base, puede hacerse fusionando el modelo deseado y la base en…
This kirby brings childhood's good memories, enjoy!!! This model was completely designed in Nomad, I'm still practicing, any feedback will be highly appreciated. Greetings from Mexico. :-)
Podložka pod stabilizační nohu karavanu. drážka pro čep-8,5, lze použít závitová tyč- M8. tištěno: ABS, hy. tepl., 90% výplň. Like potesi dekuji
A small dungeon key from the game Legend of Zelda: Link's Awakening
Lesson Plan & Activity: All coins must be made from an initial revolve, resulting in a coin that is 6cm in diameter and 1.25cm in thickness. Must not require ANY supports. It should be gear-esque in nature. NO moving parts (no gyroscopes,…
it needs supports to be printed 👍
Ein Godzilla mit Klo Kopf
The Rock shall grant you one heart or stamina vessel! Store stuff you want protected by The Rockess Statue in the secret compartment. Print with supports for best results, and download the bottom part from the original model. Goddess…
Are you worried that you'll scratch or dent your precious LTT store water bottle that you probably spent $30 on shipping for? Have no fear! For now you can print a bumper for your bottle, to protect it from scratches and smaller bumps…
Those teensy little microSD cards are just asking to get lost among the detritus of our lives, so having some way to carry them about in a slightly larger form factor is helpful. My Lozenge-sized holder is a bit more manageable to carry…
6-pack game piece used for the game Drink-A-Palooza. Should be a 1-to-1 scale model. Needed more pieces for larger groups of people.
Nintendo New 2DS XL – Zelda-Inspired Top Cover This is a custom top cover designed for the Nintendo New 2DS XL , inspired by The Legend of Zelda limited edition aesthetics. The model has been carefully designed to match the original…
Joycon with triforce logo. best suited for resin printer but it may work on MDF printer as there aren't as many details
This is a holder sized to fit Fisherman's Friend Original lozenges ('first developed in 1865 for fishermen working in the extreme conditions of the Icelandic deep-sea fishing grounds' it says on the packet). They are sold in a mostly…
Making a key ring full of dungeon keys from Legend of Zelda and I couldn't find a model for the Phantom Hourglass small dungeon key so I made my own.
Shim to center the belt x-axis. PETG/ASA 90-100% infill.
This sculpture was inspired by Sierpinski triangle's and the Triforce from Nintendo's video game the Legend of Zelda. if you're generating your own STL's in openScad using the script, Keep the depth=N below 8 in openScad, or it will take…
utile tavolozza per dipingere miniature
I created this simple foot for a 36x18x18 terrarium. Stays in place with a press fit. Simple and removable. Link to the terrarium: https://a.co/d/7faTcwD
The boss key from the game Legend of Zelda: A Link To The Past This model is designed to be printed with an MMU I put a small hole in it so it can be put on a key ring
Dobry den, Vítejte na mém profilu, plném modelů a miniatur :-) Já jsem Ainon3Dprint tvůrce modelů a tiskař Mám tu pro Vas vlozku do mechanizmu dveri, resp. kliky. Podle fotky poznate, zda je to pro vas to prave. Venkovni prumer je 49,6mm…
Español: Es un pequeño mod para añadir un segundo ventilador de capa ya que para capas altas con boquillas grandes (0.6 / 0.8mm etc) uno solo es insuficiente y no da tiempo a enfriar del todo el material depositado, con este mod se puede…
Legend of Zelda Inspired Napkin Holder Add a touch of Hyrule-inspired style to your table with this 3D-printed napkin holder. Its bold, Triforce-style geometric design combines practical function with a fun gaming-inspired accent for…
Jedna se o vlozku ktera se vklada co civky a pote se vlozi na drzak filamentu tiskarny .. jiz mnohokrat se mi stalo se motor extruderu zbytecne taha civku a telo a jelikoz neni vystredena na original drzaku motor se timto zbytecne vice…
Podlozku jsem tisknul s vyskou vrstvy 0.15mm z PLA.
Slouzi pro nalisovani kuzelikovych lozisek do hlavoveho slozeni na motorce. Podlozit oriskem z goly a stahnout zavitovkou.
My partner has an epoxy resin home business, but the fumes from the art are unpleasant and unhealthy. However, the weather here is rarely good enough to do the craft outdoors. As such, I went looking for fume-hoods for our hobby room for…
podlozka pod mis do kancelare nebo jen tak nekam
Einfacher Schlüsselanhänger mit Schulname.
Upravena vyska modeli kvuli opotrebeni .
This is a copy of the original foot for the IKEA LÄMPLIG.
Free to other makers. Not authorized for commercial production without written permission by owner (yes, this means no Etsy or Ebay selling).
I needed a good solid strain relief for a permanently-embedded USB cable in a project. I looked on this site but could not find anything small and simple like this. I needed one for a 3.5mm cable, and I decided to make a variety of them…
Magigoo Holder for HSW. The inner diameter of the holder is 31mm.
This cover Lozenge Pattern How to make your own lithophane You need a picture, no matter if color or grayscale, no matter if picture or screenshot, everything works. Step 1 upload your image https://tool.itslitho.com/UploadImg Step 2 use…
Got an aquarium stand to put this enclosure on, wanted to make it couldn't fall.
These tiles fit together to make a variety of "lozenge" tilings, or tilings by 60°-120° rhombuses. Strictly alternating them like a checkerboard will give you a grid while keeping all the same orientation collects them into hexagons.…
Here is my simple solution to hold the control puck for this lamp in order to organize my desk surface a little more. Used 3M foam tape to attach to the bottom of my monitor.
