Liczymy pasujące modele…
✔ For more sculpts like this, and if you are able to support my artwork, take a look at my Patreon :) This has become one of my most popular prints, and is a “remaster” of one of my older Deadpool sculpts, that now requires no supports!
This version of the Master Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This design is my attempt at creating the ultimate 3D Printable BOTW Master Sword. This Master Sword was meticulously designed in Fusion 360 so that all parts can be printed without support material, and the final piece can be assembled…
Made possible by my amazing Patreon supporters! If you like my work and want more models and pre-supported files for resin you can support me in Thangs This model is support free BUT i recommend you use a support pillar right next to the…
If you like my work and want more models you can support me in Thangs Yoda, a Force-sensitive male being belonging to a mysterious species, was a legendary Jedi Master who witnessed the rise and fall of the Galactic Republic, followed by…
Welcome to The Low Poly Auto Show! This is a remastered version of my low poly Porsche 911 Turbo. Printability has been enhanced and the design has been cleaned up. Print this model with NO SUPPORTS. Details/fit may not print as intended…
Find 9 other poses when you support me on Patreon: https://patreon.com/galacticarmory
Halo's Master Chief from Halo 2/3. This is a model conversion from the Steam Workshop: https://steamcommunity.com/sharedfiles/filedetails/?id=1288452790 Print instructions Print with supports for helmet and chin.
Info: I have taken great original model from @OneIdMONstr (thanks!) and had an idea how to make bigger alien facehugger which is still fully print-in-place bent tail & fingers allow: much longer tail (tail has 41 particles, instead of 11…
Meet the Capibara: calm, cute, and ready to vibe on your shelf or backpack! With its relaxed pose and friendly face, this little fellow is the ultimate print-and-go animal. A great companion for your desk, collection, or to turn into a…
It's been exactly 5 months since I published my first 3D print design. Back in August, I uploaded my design for a fully 3D printed Master Sword from The Legend of Zelda: Breath of the Wild. I had been working on that design on and off for…
Been working on this for months for my son during my spare time. Master sword with a telescoping blade. The blade pieces can be replaced as the top of the pommel screws off. The hilt is modeled after the Master Sword from Breath of the…
I cut the model in half for easier printing, superglue the two halves together to complete it. Also erased more of the hilt so it could sit deeper in the book and be less likely to fall out. I personally liked printing this at 130% with…
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. Wanted to…
Description Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and addons 5 perimeters to screw and head of…
Master Chief Helmet Made by Kolnic over on thingiverse at https://www.thingiverse.com/kolinc/designs , thought some people here would wanna print it, I have and it is an amazing very detailed. Sadly no remix for visor free version, but…
This is a remix of a number of Halo Suits but a derivative of the links below. Still a work in progress, but getting there. : ) Sorry the files are all over the place but I'm not a very good tidy file keeper. There may be double ups and…
24/01/26 - V2 DEFINITIVE UPDATE Is buying a KO MP10 off aliexpress too easy for you? Do you already own every single iteration of this mold? Do you want to be a god? Thanks to the amazing updated original file by Petergross3, I'm proud to…
The Polymaker Reusable Master Spool is a durable, empty spool designed to hold refill filament coils sold without disposable plastic spools. It allows users to reuse the same spool multiple times , reducing plastic waste and shipping…
If you like this model, feel free to tip me at https://ko-fi.com/kcthechemist. If not no worries and enjoy! Easy to print and assemble Pokeballs. Assemble with superglue. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Attention: we are switching to 1 kg refills, so this 800 g version is unfortunately no longer compatible. The new 1 kg Masterspool can be found here: https://www.printables.com/model/1464203-masterspool-1-kg-das-filament-refill…
Printed to be a desk ornament. .2mm layer height, 15% infill, and supports needed for the underside. I made the one in the pictures using Hatchbox Metallic Silver PLA
Edit: Added a Multi Material version of the sword. It is a 3mf generated in Orca slicer for a Bambu Lab printer. I have labeled the parts with proper names and colors for other printers. Remix of my Master Sword sized to fit into Dummy 13…
The parent design is good, but I wondered, could I use about the same amount of material, but make it stronger/better ? The answer, thanks to Fusion360's generative design inspiration and stress analysis is yes! I hope this improved…
This model work only with the OLD version of ReFill. If you have recently purchased ReFill products with the cardboard core, please download the updated flanges HERE ReFill is manufactured for usage with re-usable master spools like in…
COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…
ATTENTION! THESE PIECES ARE ONLY TO BE USED BY THOSE EXPERIENCING DIFFICULTIES FITTING CERTAIN PIECES TOGETHER FROM MY ORIGINAL MASTER SWORD DESIGN! Hopefully not many of you will need these pieces, but more than a few people who have…
Prologue: In the 10 or so months since I posted my Master Sword design, I've had countless requests for some sort of wall mount or display stand design. There's even been several designers that have published their own displays for the…
Clam shell protective case for Logitech MX Master 3 & 3S. Magents Fits together with either four 4x4mm or 6x3mm magnets. Choose the right files below. Location Pegs Cut 2x 8mm lengths of 1.75mm filament. Press fit or glue into the small…
I have generated this collection and it contains several variations of the Gridfinity baseplates and bins. This will continue to be added to so please follow to keep up to date. Thanks Griddex
I'm making a master collection of all symbols of the car dashboard. I will upload now 50, and I will update overtime. I hope you like it. 1st pack (50): 10/07/2024 2nd pack (50): 12/07/2024 3rd pack (50): 16/07/2024 4th pack (50):…
Description; Halo Mk V Armor from Halo Infinite (ripped from in-game) adapted to an action figure using my MODULYR V2 action figure template. This is a 6 inch scale figure, with 22 points of articulation. It comes with a colored visor…
The Legend of Zelda: Tears of the Kingdom MasterSword by xenonjibei on Thingiverse: https://www.thingiverse.com/thing:5988140 I prepared the blade in Bambu Studio for multicolour printing. I also split the blade in half and scaled…
This is essentially a re-make of https://www.printables.com/model/666609-ender-3-v3-se-ball-joint-filament-guide with a more reliable mounting option. As mentioned there, I really like the ball joint filament guide, it's fun and…
THE NEW AND IMPROVED SPIDER LEGS, NOW WITH ADDED POLYGONS! For a long time, I've wanted to redo the old Spider Legs model. It was the second Dummy mod I ever did, and over time I've noticed all of the little errors I made more and more,…
This is an expansion of the helmet by big_red_frog. The .stl's are entirely his without any modification by me. His main interest was in creating the files needed to make the helmet. However he does not go into detail about other aspects…
Popandsicle’s Master Sword is totally genius. The sword prints without supports, doesn’t require glue, and looks amazing. Plus, it’s free! However, the original model is designed so that all pieces fit on a Prusa Mini. This is really cool…
This model includes a few ways of printing: Two halves that need to be printed and glued onto each other the blade and hilt seperate from each other the blade and hilt seperate from each other BUT the hilt is split in two halves As a full…
Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Materials recommended: PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: smooth Technical information for TM…
Description Welcome to The Low Poly Auto Show! This is a remastered version of my low poly Ferrari F40. Printability has been enhanced and the design has been cleaned up. Print this model with NO SUPPORTS if your bridging skills are up to…
Subscribe Now! Time-lapse print video : https://youtu.be/eiYnqkRD9Qg Remix to support free and printed. Subscribe to find out more support free 4K Time-lapse video: Subscribe Now! http://www.youtube.com/iczfirz Addiction to 3D Printing?…
Very useful, this key can be added to your keychain. So, no need to look for a coin anymore. Opens deposit locks without coins or tokens and can be removed immediately. Print settings: Default PETG 0.2mm, nozzle: 0.4mm
Hello everyone, I’m P1lotz , a professional 3D artist from Scandinavia, and I have been working in this field since 2019. This time I have decided to update my first articulated model, with new details, fixed mistakes, moving tail and…
The C-17 Globemaster III is a large military transport aircraft that has been in service around the world for the last 30 years. Created as a paid commission for ChmNrd , the same legend who commissioned the C-130 Hercules Kit ! EDIT:…
I DID NOT MAKE THESE I AM SIMPLY RE-UPLOADING https://github.com/Xyl2k/TSA-Travel-Sentry-master-keys 3D TSA "Travel Sentry" master keys Recently, pictures of TSA master baggage keys got leaked by the Washington Post and also PDFs hosted…
This is a remix of master chief John 117. It was printed with the following configuration: layer heith :0.2 support: Yes. Raft: No Filament: PLA + Filament Brand: GST. Nozzel temp : 205cº Bed temp: 60cº infill: 18% (variable in two steps)…
Masterful Dungeons Stone Floors are designed as part of a fully modular dungeon system built for tabletop RPGs like D&D and other TTRPGs. These floor tiles are double sided , with each half connecting to each other with a allowing full…
Welcome to The Low Poly Auto Show! This is a remastered version of my low poly Nissan GTR R34. Printability has been enhanced and the design has been cleaned up. Print this model with NO SUPPORTS. Details/fit may not print as intended if…
Prints without supports. I used 0.16mm layer height with 15% infill.
Holders for the sockets, torx, allens, extensions, and adapters
Filaments Flashforge Burnt Titanium PLA Hatchbox Sparkle Gray PLA Overture Black TPU Print Settings Base settings were the "0.20mm DETAIL" preset in Prusaslicer for Original Prusa XL - 5T 0.6 nozzle profile. I modified the following: 3x…
this whistle contanis major improvements compared to my V29.1 whistle. please be careful and use it responsibly. The whistle responds very easily due to an improved labium. It provides lesser air consumption aswell I built in reflectors…
Compatible with Cooler Master's MasterBox NR200 and MasterBox NR200P . The design of the bracket is ventilated for actively cooled units to be installed, independently from the orientation of the intake fan. The bracket is also compatible…
Don't forget to like and comment. I want a joystick grip that looks cool and feels like it's the real deal. Voilà This joystick grip has been inspired by the original sidestick, which is installed in Airbus airliners. Based on this…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability, add : 6 first and last layers and 4 perimeters to Universal Clamp and all addons 5 perimeters to screw and head of screw…
The helmet that Master Chief wears in the Halo 4 / 5 games. It is wearable. I scaled down to about 90% and is still very large and fits. Is cut up for Ender 3 as well as some larger printers. The cut-up pieces need to be mirrored. Also…
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Model is upload of original from thingiverse and Zambrana95. Make sure you do supports for the pommel and orient it upright for printing. Otherwise very prone to failure with PLA.
Whats even better than upcycling? Not creating waste in the first place. This turns your Prusament-Spool into a Refill-one. If you are looking for a design that does not require glue, I recomment this one:…
I made this to transport my mouse to and from the office without worrying about it being damaged by other items in my bag. Uses eight 6x3mm magnets to hold the case closed. These will need to be glued in. The text was added in prusaslicer…
Hi Internet Sim Racers, After doing a final test print of my Thrustmaster Txxx 70mm hub adaptor kit... I feel it's ready for public thrashing. Ok, so whats in the pack I hear you ask... through some form of audio bug I have in your…
Welcome to The Low Poly Auto Show! This is a remastered version of my low poly Datsun 240Z. Printability has been enhanced and the design has been cleaned up. Print this model with NO SUPPORTS. Details/fit may not print as intended if the…
This is an adapter that allows you to convert an empty Prusament plastic spool to a master spool. Motivation I love the concept of the master spool, but it's quite a heavy print (6+ hours for part B, 12+ hours for Part A). I saw that the…
Updated so the visor section is separate from the helmet. Haven't cut up into smaller pieces but it isn't too hard to do so within a program of your choice such as Microsoft 3dbuilder Maybe if you enjoy my work to make this remix you…
Security Please follow the mounting instructions in PDF to replace plates and knobs Customize at your own risks ! Technical information for all model files: Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) For more durability , add : 7…
Important Update 2025/2026 Das Filament changed from 800 g to 1 kg. The old Masterspool is no longer compatibel with the 1kg spools. The NEW Das Filament1 kg Masterspool:…
This remix is a mashup of @Popandsicle's excellent BOTW Master Sword Hilt and @xenonjibei's TOTK Corrupted Blade! All credit for the designs goes to each of them. If you have already printed @Popandsicle's Master Sword then you should be…
Welcome to The Low Poly Auto Show! This is a remastered version of my low poly Aston Martin Vulcan. Printability has been enhanced and the design has been cleaned up. Print this model with NO SUPPORTS. Details/fit may not print as…
Amolen Matte Green, Amazon CC3D Silky Metallic Gold, Matte black and Ziro Silk metallic silver.
A model from Master Chief, from Halo
Masterful Dungeons Modular Walls are designed as part of a fully modular dungeon system built for tabletop RPGs like D&D and other TTRPGs. These walls are separate pieces , not integrated into floor tiles. This allows you to freely…
English version, German version below Description: Pictures are a wonderful way to fill empty walls. However, one can quickly get tired of looking at the same picture, not knowing exactly what to hang on the wall, or not wanting to invest…
I'm a big fan of refill filaments, but AzureFilm's masterspool doesn't have a strong connection between the 2 parts. It risks detaching and you are left with the filament scattered. That's why I designed the 2 parts with a thread for a…
Masterful Dungeons Props are designed as part of the fully modular Masterful Dungeons system built for tabletop RPGs like D&D and other TTRPGs. These props are standalone pieces , intended to be placed freely on top of the floor tiles or…
We’ve teamed up once again with Printables.com for a complex design challenge ! This time, you’ll get to choose from three different modular products to make your own. Cooler Master’s FreeForm 2.0 philosophy is all about giving makers the…
A dry brush texture palette that fits into the cover for a Masterson's Sta-Wet Handy Palette. 165mm Square, 5mm deep. This will fit on a Prusa Mini bed. Feel free to scale it up or down as needed, or let me know if one of the patterns…
Basic case for Logitech MX Master 3. Snaps together with two 6x3mm magnets. The Magnets should be a push fit. EDIT 23.04.2022: I added the raw STL files as requested by albza EDIT 24.02.2025: Added a V2 where the pockets for the magnet…
A legendary blade forged in wisdom and courage, the Master Sword cuts through evil with a whispered promise of Hyrule's resilience. This handcrafted bookmark, capturing the essence of the iconic weapon, marks your place in thrilling tales…
Exhaust Fan Silencer that was inspired by the Flowmaster muffler design. I know that it looks kind of hokey, but it's hard to argue with the results. The folks at Flowmaster really know what they are doing with muffler design. This Fan…
Masterful Dungeons Clips are designed as part of the Masterful Dungeons modular dungeon system. These clips are used to securely connect tiles and components while still allowing fast assembly, disassembly, and repeated reconfiguration…
Gridfinity BIN Master / Blank / F3D file
If you want to preserve the thread of your sticks : print this model !
Desk mount for a Thrustmaster T16000M HOTAS. This design will lock the mount in a forward position, so it's best placed either in front of you, or closely off to the side. This assembly is not entirely customizable like other models…
Mini Master Spool designed to keep filament samples organized. OD - 160mm. ID - 55mm. Screwed together with 50mm trapezoidal screw.
This is a redesign of the MasterSpool by Richard Horne (aka. RichRap) . Ideal for DasFilament and FishyFilaments . The spool is now fully symmetrical. The spool end can be fixed more easily, and there is a release path for filament…
Cute Halo Master Chief Figurine
This is a set of pieces that can be used to create a Halo Master Chief inspired figure at 500% scale. All the stl files needed to make this can be found in the "Stl Files" folder below. For those with Bambu printers, there is a Bambu…
I created these Star Wars Minis to hold a piece of 1.75mm filament. Heat & cool filament to make straight sticks. Collection HERE: https://www.printables.com/@TripleGWorkshop/collections/2171907 Tree Supports on build plate only Partially…
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
Summary A phone holder for the Thrustmaster T300 (RS) wheel. Currently fitting my iPhone 12 very well, but similar phones might also work. Very nice in combination with the Simhub Dash to show some metrics during sim racing. Printing…
A file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model, but…
Update #4: If you want no play at all I (and other users) recommend scaling Z in the slicer to 104%. Especially if you have vibration motors on your pedals this will eliminate any play or rattling. Update #3: Some tips and feedback from…
Welcome to The Low Poly Auto Show! This is a remastered version of my low poly Honda Civic Type R. Printability has been enhanced and the design has been cleaned up. Print this model with NO SUPPORTS. Details/fit may not print as intended…
I made this F3D file very easy to mod for the press fit of the magnets. If you go into the sketches folder and open the ( Magnet Holes ) sketch you can adjust the hole size to best fit the press fit for your press fit needs.
Welcome to The Low Poly Auto Show! This is a remastered version of my low poly Subaru Impreza 22b STI. Printability has been enhanced and the design has been cleaned up. Print this model with NO SUPPORTS. Details/fit may not print as…
Master Roshi from Dragon Ball Series. if the beard gives anyone trouble let me know. looks a tad thin even after offsetting.
This model is COMPLETE as of right now, everything fits as it should. I have played several hours of War Thunder and MFS, my thoughts are as follows: The mounting bracket has a very still hold onto the ThrustMaster desk clamp especially…
Welcome to The Low Poly Auto Show! This is a remastered version of my low poly BMW M2. Printability has been enhanced and the design has been cleaned up. Print this model with NO SUPPORTS. Details/fit may not print as intended if the…
I didn't like any of the available Designs for Gimbal Protectors already uploaded on Thingiverse so I decided to design my own improved version. Some Key Features I found important: Both Gimbal Protectors connected in the middle, no…
![60mm Exhaust Fan Silencer Flowmaster (PSU) Ender3/Neptune[2,3]/Others](https://media.printables.com/media/prints/84197/images/897846_4f0b8151-b2a0-429d-981c-156618d23e1b/fan_flowmaster_2.png)
