Liczymy pasujące modele…
Honeycomb Wall parts I designed, I also created my own Screw Wall that is much stronger and many more available tool holders (over 300) check it out! Thanks for looking. Screw Wall now has over 50 Club subscribers! I also have created…
Use 3 walls, 25% infill. A simple drill-powered mixing attachment designed for stirring paint, coatings, resin, pigments, adhesives, and similar liquids directly inside cans or containers. The mixer attaches to a standard drill and helps…
This is a two part stirrer, the stirrer itself and the shaft. You'll need an m5 bolt (40mm or so) to screw the stirrer into the shaft. You can customize the shaft length by non-uniformly scaling the X axis longer. I printed the shaft…
I put together this hanger to have a place to store all of the attachments for our KitchenAid stand mixer. The pieces press-fit together... I secured mine to our cabinets using 3M double-stick tape, which serves two purposes... keeping…
Remix of "Wave Puzzle 7" by ThinkingPegasis. ( https://www.thingiverse.com/thing:3739933 ) Changes and/or improvements over the original: Thicker pieces Pre-flipped a few of the tiles to not give the solver a hint based on the surface…
-EN- _ *** 2022/10/11 *** FINAL VERSION 1.0 *** *** 2022/10/12 - The missing skin for the neck was added. *** *** 2022/11/09 - Fixed too loose "ears" and removed unnecessary extra parts. *** Do you like Chappie? His little brother is…
It's that time of year that my girls do their cookie weekend. They make dozens of different cookies. I saw several ads for funnels. I thought I would design/make them one. They have Kitchen Aid K45SS and a Professional 5 Plus mixers. FDM…
This is a remix of Baymax which has printable eyes that you can insert. The original model for some reason had very bad layering so I smoothed and increased the poly count. Print with lots of support under the hands otherwise one of them…
Version 2 - moar magnets: After feedback about the camera not sticking - probably due to weaker 6mm x 20mm x 2mm magnets than the ones I had available, the model was revised with the following changes: The 6mm x 20mm magnet is…
A small Paint Mixing Tray for modelling complete with Brush Rest/Holder. Size 105mm x 50mm. The one in the picture is scaled 20% bigger in the slicer and printed with 10% infill. Addition 27 Oct 2023. added a larger version (130 x 80mm)…
This is a minor remix of a Gridfinity USB organizer by Segan Designs who added the Gridfinity base to the original by Honza200. I reverted the change of Segan Designs and removed the USB C port for the original USB A port. Printing of…
Intended to be mounted under kitchen cabinet for storing mixer attachments. Secured with 2 screws. Intended to be printed on its side with supports.
NEW VERSIONS v3 of the AD5M door hinge now available expressly for the Minimal enclosure and its remixes. It moves the plexiglass door downward by 5mm to accommodate getting the touchscreen back on the metal frame, as well as all the…
One of my son's friends has gotten into D&D recently, so I made a bunch of remixes of my models to be a little more D&D compatible, then printed them out and am giving them to him for his birthday. I figured that I could go ahead and…
NOTE: If you need even more organization, you can print the “ Any Size Hanging Trays for "Modular Drawer Dividers" (Parametric ) ” to provide even more space for your stuff! These trays work great for utilizing the unused vertical space!…
Mouse mounts for ikea skadis pegboard.
Removed the micro SD card slots for 3x more full-sized SD card slots. Only the 0.4mm tolerance non-stackable version remixed. This is a remix of nerdpersonthing's Hinged SD / microSD Card box ( Printables ), which is in turn a remix of…
Balisong butterfly knife toy. If you beginner in flipping knives i recommend printing mine remixed version beacuse its more durable. Oryginal version is of course prettier but standing prints are less durable. Print settings: Layer height…
This mixer is designed to fit into a cordless drill and can be used to mix paint in smaller paint cans. I tested this extensively and it works great, you can nicely control that not too much air is dragged into the paint and the mixing…
Paint mixer - 100% printable - no support - optimized orientation Flawless mixing: High-vortex paint mixer for perfectly blended, streak-free paint in seconds. Easy to clean. Both parts are securely joined by a short 16 mm piece of…
I wanted a 3 color Pastamatic with Bambu colors to compliment my Bambu Lab Colored toolbox with AMS lid. Decided on Black Frames, Grey Parts, and Bambu Green spindle clips for accents. File is on 4 seperate plates. Took considerable time…
Modified version of the original Measuring tire groove from Lopata_225 . I had a problem with printing the inner part that needs supports. Therefore, I modified the model so this part does not need supports and could be printed with the…
v3: Added corrected brackets for mounting with velcro or command strips, if screw mounting to the wall is not an option. They should print properly now! Get your CPAP off your nightstand! Get it on the level of the mattress, too, if your…
Turn your cordless drill or power drill into a practical mixer with this 3D printable Drill Mixer Attachment! Designed for quick and easy mixing of a wide range of materials such as paint, plaster, grout, mortar, cement mixtures,…
Just remixed this to be a key chain Category: Toys & Games
This version is fixed to the Ender 3 v2 X-Carriage using the two upper roller wheel screws instead of the BLTouch mounting holes. Remixed from: Biqu H2 Mount + Cover - Ender 3 CR10 https://www.thingiverse.com/thing:4740250 BIQU H2 Ender 5…
I designed this cord wrap to fit the curved back of my Kitchenaid stand mixer, but it should fit anything with a wide curve. Attach with double-sided tape or other adhesive. It should print on its side without supports, but minimal…
Remixed the Annoying Gift Box by u: LittleCoolBomb : sized in mm. separated the lid from the threaded tie segment. provided split bow for easy, support-free printing. added clearances of 0.3 mm for the tie segments. provided a faster…
This is my Inverse Kinematic Paint Mixer, as seen at https://youtu.be/FnnN7typFP0 These printed parts combined with the following non-printable parts will make an automated mixing station for your small paint bottles (up to 45mm…
Updated so the visor section is separate from the helmet. Haven't cut up into smaller pieces but it isn't too hard to do so within a program of your choice such as Microsoft 3dbuilder Maybe if you enjoy my work to make this remix you…
UPDATE: Thank you for taking a look at this project. I still use mine - but there is now a more active implementation of this modular idea that you would probably be better off printing. Please see:…
I was inspired by a recent model upload to create a parametric paint mixer. This model with associated Fusion 360 CAD file turned out really well. You can customize the width, height, blade thickness, bore hole diameter, bore hole length,…
This model is one of many Print-in-Place add-ons for my Modular Truck project. Print-in-Place means that all parts are printed in one go with no assembly required. All add-ons can be connected to the truck seen in the pictures. Thanks to…
Happy Thanksgiving - Make those Holiday Recipes with ease with this Easy to add dry ingredient funnel to your mixing bowl while the mixer is running (or not). This offset funnel has a tool accessory post to mount onto the KitchenAid…
Full sized White Power Ranger Sword! Can be printed whole or as separate pieces.
UPDATED V4 (5/31/2024) I add a new version with very slightly softened shape on the inside of the “catching” part, to make it even sharper where it matters with very low layer printing height. Please read the recommended print settings…
This collection includes five spiral mixing tips in a variety of sizes, making it easy to find the right tool for your mixing task. The spiral design helps create a smooth and efficient flow of material while reducing splashing. These…
Slider knob for a Soundcraft, Yamaha or Behringer (probably more) mixer. Tight fit. Print the insert in a different color and glue it on the knob. Printed mine with PrusaSlicer on a Ender 3 V2 with variable layer height and 20% infill.…
A remix of Caleb Timoteo's excellent AT-AT pot plant. The main goal was to separate the parts so the base could be printed in white, with the AT-AT in grey. I ended up making a hoth planet base plate, which is recessed for the AT-AT to…
Mixer attachment with hex handle and safety ring for mixing paints, resins, silicone, plaster, gypsum, etc. Includes set of heads, hex handles and handle connection barrel. Diameter = 30mm Height = 20mm Hex handle length = 160mm…
This is a simple remix of the USB organizer by Honza200 Removed 1 SD card slot and 1 USB A port Added 1 USB C port Added a Gridfinity base with no screw holes
Turbo mixer attachment with hex handle and safety ring for mixing paints, resins, silicone, plaster, gypsum, etc. Includes two handles and extension barrel. Diameter = 40mm Height = 50mm Hex handle length = 200mm x2 Prints quickly and…
A scaled-up version of the original, and then split and modified to allow easier printing, and for being able to join them back together. You can use as three split ramps, individual jumps or all joined together. I recommend printing with…
I wanted to speed up the print time and save some material so I made the hex holes bigger.
Based on the original, but (1) enlarged a bit so the cord fits better and (2) used angles (no curves) so it prints w/o supports (printed on its side). I attached it with a medium size 3M Command Strip.
This was a lot of fun to remix I learned how to use several things I had never used before in Blender and I have already been asked print several of these. UPDATE 11-17-2019: Layed the models flat on the build plate for better adhesion.…
NOTE: The photos for this model do not reflect the actual printed STLs provided but are there to show how this shelf functions. There is a photo of 2 examples using the solid shelf + the “even faster” steps provided below using the…
Saw some paint mixers online, but didn't find anyone I liked and thought was designed to my liking, so I whipped this one up, has a 6mm hole in order to use a wooden or aluminium dowel that you can either glue or screw in
This is just a simple rescale of the original for use with tablets. I liked misterT's remix of jonnig's phone stand , especially the stronger front hinges, which tend to break easily in the original. But the "medium" version is too small…
You can use this tool to mix paint or epoxy with your drill.
Update 12/12/2025: I adjusted the bottom part (the pins are slightly narrower and there are four of them). I made the top part a millimeter deeper overall, so that the display should be better protected. Update 09/14/2025: I adjusted the…
Modified parts for https://www.thingiverse.com/thing:1568198: SirHa_Kurbel2.stl -> PNU_handle_grip.stl. Cut an edge to the top and bottom plate as at least my printer can't print circles in air Gehäuse_2_a1.stl ->…
Find other STLs in the original model If you' re searching for a case which fits a RPi and further electronics, please find this Model If you're using an 800mm x 800mm panel for mounting AND you're using the new feet which are mounted…
I remixed this very beautiful egyptian beetle by Peter Farrell with the aim that it could print flat without supports in FDM. I took the opportunity to smooth the 3d model a bit. You can find the original model here Follow me on Instagram…
Paint Mixer - remixed from https://www.printables.com/prints/171895-paint-mixer to give it more robustness on the shaft element. TinkerCad file: https://www.tinkercad.com/things/6CBctKDDngC Shaft diameter increased, base/propeller…
This remix adds revamped arms and legs to @JHB's already-awesome Bender model as well as adding new beer bottle and cigar accessories. The arm/leg segments are unified (use 5 for legs, 4 for arms) and use a ball-socket design for full…
This disposable mixing paddle is designed as a low-filament, practical workshop consumable for stirring glue, paint, epoxy, resin, fillers, and other messy materials. The paddle is intentionally simple and lightweight, making it quick to…
print with supports, 10% or more infill. you can see the modifications I did in the attached picture.
Heyho I wanted to mix a few samples with different colours or additives with epoxy resin and was looking for small mixing sticks. Unfortunately I haven't found anything really suitable in size. So I constructed a mixing stick myself. It…
Update 4/2023: Updated 3D models to include versions for both Micro USB and USBC Arduino Pro Micro boards. This is my take on a 3D printed enclosure for the Deej volume mixer. The design is based on the MisteR deck. Please check out my…
Put it on your table or make it mobile by using 4x lorenkrampe to mount it on G scale log car wheelbase ( https://www.printables.com/de/model/335862-log-car ) How to build it: Put gestell2 into the slots of gestell1. Push Schwenktrieb…
This is a remixed door handle for the Semi-Official Prusa MK3 Enclosure Project ( https://goo.gl/ssr5fm ). I found that the magnets are hard to come by for the handles, so I remixed the handles to allow the use of the same magnets used in…
This is a mixer tool for mixing. It prints without supports, the hexagonal handle has a standard 1/4 size and attaches directly to your electric drill. Diameter = 40mm Head height = 40mm Hex handle Length = 160mm
A simple and easy to print stand to hold the 4 standard Kitchenaid bowl-lift or 3 head-tilt mixer attachments upright. Saves some space and keeps them organized. The head-tilt models come with a different dough hook that requires more…
This is a simple shaker/mixer that attaches to your hand drill (corded/cordless) to drastically speed up the time it takes to mixing of a can of spray paint. No longer do you have to shake the can manually for a minute or more. I've…
This base is remixed from https://www.thingiverse.com/thing:6292817 by Junolupus I've just made two pieces out of it, to print the footprint independent of the rest of the base. For example to use a different color and/or to use a much…
This is a convenient paint shaker for spray cans. It consists of a hollow cylinder with an elongated hole at the bottom. There are two sizes availabe: 55mm (works for smaller cans like those from Edding) and 68mm (works for most other…
Fidget Anchor – Print-in-Place Fun! ⚓ Set sail for fidgety fun with this print-in-place Fidget Anchor ! The fully articulated chain easily snaps into the anchor, while the other end features a free-spinning loop with a bearing and spoke ,…
Credits to manabun on Thingiverse for the great original design! Original: https://www.thingiverse.com/thing:2769344 I modded the design to be printable in a better position without support. The slot is slightly modified for an easier fit…
Soldering Helping hands, re-re-remixed A further evolution of the re-remix , based on this , inspired by this which originated from this . Phew.. Third-hand designed to solder wires and/or component leads , featuring: Adjustable distance…
I really enjoyed assembling the blaster from mh319, but there were some things I wished it had that it didn't. So here is an overview of what has been changed or added. I created instructions to assemble it. I added screw holes, an…
The side up orientation should help a little with strength and you shouldn't have any issues printing this as you would with any other model without adding further supports in slicer. Credit to…
Remixed @ RAMServices1959 from Thingiverse to make it slightly deeper to allow for purge waste to fit in for longer prints. Doesn't need supports to print. if having trouble fitting on the print bed in Bambu slicer right click on the…
A small mixer or stirrer attachment for (cordless) drills. Ø = 50 mm . It takes a 6 mm round shaft , which i just fixed with a small drop of superglue . I needed a small attachment for mixing smaller amounts (perhaps up to a litre) of…
Notes Since my poor tolerances of my 3D printer did not allow me to print the thread correctly, I remixed the great 03v2 file from Wilko to fit my needs (thank you for the fusion 360 file !) Fully compatible with the original author…
paint mixer hole diameter 8mm Category: Hobby --- If you are interested in supporting my work and gaining access to the original STEP file of this model, I now offer the opportunity to receive it through a small donation. The STEP file…
The canopy is modified to be directly usable with the BetaFPV Meteor 75 Pro O4 hardware, i.e. the surfaces were flattened to account for the screw heads, and the antenna holder was altered to fit the fat O4 Lite antenna. Print in TPU or…
A highly efficient, heavy-duty mixing paddle designed to replace broken or worn-out commercial epoxy/paint mixers. Engineered with a multi-fin blade design to create a strong vortex, ensuring thoroughly mixed resins, epoxies, or paints…
My sister found an item online that she wanted me to make (first image), but I couldn't find the file anywhere, so I made it myself and figured I'd share it with the rest of the world, hah. There were 3 iterations, the 2nd one was good,…
I didnt make the double post. if someone need it just comment here and ill make it.
Cross Brace: There are three STLs for your use: cross brace with cut area; cross brace pre-cut right side; cross brace pre-cut left side. I moved the fan mount location to the corner, rather than the middle. This allowed for the addition…
remixed https://www.thingiverse.com/thing:4905821 to have 4 racks and removable base for flat printing. Have not tried to print, hope it works. Holds 40 pairs of earrings or 80 individual earrings.
Flashforge AD5M Door Handle - remixed to print without supports needed Only change is to angle the existing overhang so the part can be printed without need of supports This is regarding the DIY enclosure upgrade . HEADSUP 1: I just…
The tolerances were a little tight so I changed them in this version. Also fixed the weird looking hole on the large flap. UPDATE: I messed up the orientation, new model has the helical gears in the right orientation so that they can be…
Can be printed without support
The mixer features a hexagonal shaft , allowing it to be securely clamped in most drill chucks and bit holders for fast and efficient mixing. Features Hexagonal shaft for secure drill attachment Compact and lightweight design Suitable for…
These are two paint mixing drill attachments that will use the power of your drill to mix spray can paints/primers, as well as model paints. They are inspired by one of Adam Savage's favorite tools: The spray-can mixer model can accept…
I took the original Buddy Christ model and added a base plate with a nice roundover on top.
First and foremost, I want to acknowledge PortedtoReality for their outstanding work on the Han Solo Blaster DL-44, to whom all credit is due. My experience of crafting this blaster has been truly enjoyable. Over the course of a week, I…
AD5X Spool Holder remixed, no end clip needed, fits all spool sizes, Recommend 15% infill or greater for strength. No supports needed.
I designed this mixer to fit into a 10mm chuck. The total length is 160mm and the base diameter is 57mm. recommended material is PETG, with 25% infill and 3 Perimeters. Edit Added a second slightly bigger and improved version, with…
First DLC or rather set of additional figures for the base game - https://www.prusaprinters.org/prints/149230-stargate-chess. This one is mixed DLC and you can have: - X-301 Interceptor - Puddle Jumper - Ancient Aurora Class - Ori…
Remixed @third-dimension-labs clean WASD keyswitch/cap fidget. Opened up the string hole so it can hold 3/32 paracord. Added a chamfer to the bottom edge. Add your own switches and caps. There are 3d printed caps on this site.
This is a remix of the fader knob that I met here, since the original model was not suitable for mass printing, I had to simplify it a little for better adhesion to the 3D printer table and the absence of the need to print with supports.…
I chose this model was because of the “Height”. I have noticed the power wires at the right-back corner, which means we would need more space to make sure the wires won't interfere with the platform leveling process. And the stage I have…
small paint/epoxy mixer with Hex-rod 8mm, total diameter of the rotor is 35mm and 20mm tall. Rod is 100mm long but easly strechable if needed longer.
I modified the main body from CartoonishNerd's "Filament Guide for Ender 3 V2" to fit an Ender 3 V2 Neo. I opened the slot up to 2.5MM to fit the bracket on the Neo. I also added the word Neo to the top of it. For instructions and the…
All REMIXED parts end with _R. See this YouTube video to for more detail on the improvements: Thank you for all the feedback, it's allowed us to make this puzzle box extra robust and much much more fun! All the feedback has lead to…
Cut appropriate length of M6 threaded rod or smooth rod with 6mm diameter. Make sure the rod is straight, otherwise everything will be wonky. You can simply screw the mixer on the threaded rod, with a smooth rod you might be required to…
Remix of the Korg Volca stand by beejums . This version of the stand will hold 2 Korg Volcas. Additional supports/parts are not required to keep the Korg Volca's in place. Print 2 and slide onto each side of the devices. Originally…
