Wyniki wyszukiwania: mull

Lego Compatible (24072.dat) Minifig Hair Long Mullet Style

This model is compatible with the lego system.

Samsung Refrigerator Door Mullion

This is yet another Samsung door mullion repair piece. There are a couple designs out there, and this is my attempt. This is the flipper that closes the center door flap on several Samsung refrigerators. It fits quite well, I've installed…

Samsung Refrigerator French Door Mullion Hinge DA61-08305A

If you have a Samsung refrigerator with a French door, you know there's a little mullion flap between the two sides of the door that slides into place when the door closes to insulate the gap. You may have also at some point accidentally…

Frigidaire Refrigerator Mullion Hinge Pin

Originally modeled in Tinkercad as a replacement for a lost hinge courtesy of my kids…. Printed in PLA, general, defaults are ok, supports recommended for pin. This should slide onto the hook built into the door, however, in my case,…

Riese & Muller Load 60 Cargo Bike Model

Based on the Riese & Müller Load 60 cargo bike. Has a kickstand and pieces together without glue. Similar scale and designs to my other bike models: Tern GSD Tern HSD Urban Arrow Riese & Müller Load 60 Riese & Müller Load 75 Riese &…

Riese & Muller Charging Cap

Due to the low quality production of the Riese Muller charging cap for Superdelite bicycles by the company, I got to the conclusion that I have to takeover and solve this problem myself. I designed this cap to go over the original cap…

Samsung mullion flapper

This is a remix that uses no supports and no glue or screws (so far). That way, if it breaks, much easier replacement (45 minute print) I used Shapr3D to make a cover piece (PLA) to cover the gap made by the broken flapper (image…

Riese & Muller Load 75 Cargo Bike Model

Based on the Riese & Müller Load 75 cargo bike. Has a kickstand and pieces together without glue. Similar scale and designs to my other bike models: Tern GSD Tern HSD Urban Arrow Riese & Müller Load 60 Riese & Müller Load 75 Riese &…

Golf Simulator Control BOX Heat map mulligan version

This is the final version of my golf simulator control box that has one button mulligan and heat map. parts can be found on my website https://www.bacustomproducts.com/ check out you tube for assembly instructions…

Flathead Grey Mullet/Buri (Mugil cephalus)

🐟 Mugil cephalus — Flathead Grey Mullet 3D Model The Mugil cephalus, also known as the flathead grey mullet, is a coastal fish found across tropical and subtropical waters worldwide. Known for its streamlined body, blunt head, and…

Full size prox reader mullion mount

Needed to mount a full size HID RP40 to an aluminum storefront door frame. Should work with most other full size prox card readers or many other devices that intended to mount to a single-gang electrical j-box and are 120mm x 80mm or…

Mullticolor Z-print Rooster

The modell is scaned with IMAGES (64) then procesed by Regard 3D optimised in meshlab and Blender FILE is WRL with vertex color. Then printed with the SHOP Z-350 Powder that got a Real CMYK printer so layer is 0,1 and then the outside is…

Mullet Tools Third Hand Boom Arm MFT3 Mount and Shroud holder

This is a workbench mount for the MFT3 rail system to hold the Mullet Tools Third Hand Boom Arm. You will also need to purchase the microjig dovetail hardware to mount into the T slots of the table. Or use other Hardware for T slots. Also…

Eachine E013 (Tiny Whoop) Canopy/Mullet/Hood

This is a model of the hood for the Eachine E013 or like frames with a camera. I have added the 3rd hole on the front right of the hood for the receiver antenna to come through. This hole allows for a range boost on the drone. Final…

GSPRO w/ single press mulligan version

Here it is the box with one push button mulligan, I had to remove the Heat map as it shared a common point with CTRL so i could not link them together. with this version i am able to create a board that is 1 touch mulligan as the mulligan…

Mullermilch Bottle Model

A model of the Mullermilch bottle...

Riese & Muller Multicharger Eurobox mounting Brackets

Riese Muller Multicharger Eurobox mounting Brackets for a clean look and distributed weight. Standard Front carrier (not the cargo one). Cable Ties 4-5mm wide. Use a durable material such as ASA. Layer height 0.12 or lower for higher…

Riese Muller Supernova light extension

The front light shines on the bag of the front luggage carrier. The light could also be installed under the luggage carrier, but then it doesn't shine on the path when turning. The extension bar makes the light shine over the bag. Use M6…

Muller ice bag funnel

This funnel is designed to screw onto the Muller Ice bags. It allows you to fill up your ice bags easier. I've printed this upside down with no supports with PLA with a brim. The thread pitch is 3.7mm.

Massager head for Oscilating Mullti Tool

IKEA Åskmuller lamp shade

Hi. It was probably just a matter of time when the nice glass lampshade will break. It came rather sooner than later but anyways. I designed a simple (and not so nice) shade to replace the glass. The glass was embedded into the fixing…

Mullex single 35L support

This a two part support for the trash can “Müllex single 35L” made when i saw that i only bought the thrash can itself without any of those necessary pieces. It consits of 2 pieces one for the door use to link the door and the trash can…

Riese & Muller Load 75 Cargo Bike Model with Rain Canopy and Rear Rack

This model is based on the Riese & Müller Load 75 cargo bike scale model and keeps the same overall size and proportions (approximately 1:10 scale ). The remix focuses on improving realism and usability, while adding a removable rain…

Riese & Muller Bottle Holder Attachment

I have uploaded two Gcodes for the left and right side. For each side you will need: 1 x M6x16mm ((=== Button Head screw 1 x M6x16mm []=== Round Socket Head screw 1 x M6x30mm ((=== Button Head screw 1 x M6 Nyloc Nut If you would like to…

RockTape - RockBlade Mullet 1

The Rockblades Mullet by RockTape is an all-in-one muscle massaging tool that will help you to go stronger, for longer. The RockBlades Mullet is a great portable muscle relief tool. Named after the hair style, the Mullet is all business…

Paul Mullin / Wrexham / Bust

Paul Mullin / Wrexham / Bust Another experiment with tiled depth maps. Wanted to see if black and white photos were better. Can't tell really. The output after displacement still needs a bunch of cleanup and sculpting. Side angle views…

Samsung Refrigerator Mullion Flap Top Hinge Repair Clip

The small top hinge tab on the Samsung refrigerator mullion flap (the flipper that seals between the two French doors) often breaks over time, leaving the flap loose or unable to open and close properly. This 3D-printed replacement piece…

RockTape - RockBlade Mullet 2

The Rockblades Mullet by RockTape is an all-in-one muscle massaging tool that will help you to go stronger, for longer. The RockBlades Mullet is a great portable muscle relief tool. Named after the hair style, the Mullet is all business…

Mullion Clips (a.k.a. Muntin Bar Clip) for 1980's Windows (USA)

A family member asked me to design these for the windows of a 1980s home in the US. The original, clear plastic clips were breaking and they needed more than a dozen, so I set about designing these. The clips hold in the bars (plastic or…

Holding aid for weidmuller style DMX connectors

These are tools to help with the older ETC orange weidmuller style DMX connectors. Originally designed to work with the Hubble HXTP25 Premise Hand Termination Aid. It consists of a block that hold the female plug that goes into the Hubble…

HID Card Reader (Mullion mount) blank plate.

I had a job that needed to cover the existing holes in the metal door frame from a HID mullion mount card reader. Card readers on the inside of the building were removed. Customers answer was blue painters tape. I couldn’t leave it like…

Vanquish VRD Mullet Axle Stand

Need to get your VRD Mullet off its tires? Here's the print for you! Design Fully parametric Fusion design (F3D provided). Key parameters are axle height and width. Each front and back stand prints as three separate pieces. Two identical…

Riese & Muller Multitinker Bike Model

Based on the Riese & Müller Multitinker family cargo bike. Has a kickstand and pieces together without glue. Similar scale and designs to my other bike models: Tern GSD Tern HSD Urban Arrow Riese & Müller Load 60 Riese & Müller Load 75…

Geiger muller tube sbm-20 Clip

Geiger tube sbm-20 Clip with 2xm2 mounting holes print at 100% infill

Busch & Müller IX RED Mount - Muller Mueller

a mount for the Busch & Müller IX RED bike tail light built to last with 72° and 76° angled versions diameter 34,5mm designed for heat sunk threaded brass inserts M4x8 use with screws M4x20 and standard washers best not printed in PLA,…

Mull Topology Coin

My sister requested something like this cast out of silver. The map has been raised to increase the visibility of the shoreline. my casting method needs improvement, but the model looks nice. may eventually add the Maclean family crest to…

Improvised TinyWhoop Case for Modified MulletMod

I really like what RockStarAlchemist did with the case, but wanted one that would accommodate the mullet mod (which removes one battery section) and would also be less tall (because it didnt need AS much height). notice…

Mullet Mod Camera Mount for FX798 FX797

This is a 20* camera mount for the TinyWhoop thats been mullet modded - I have nto tested if it works on the combo unit, as I separate them. I was flying around with my old mount and landed hard on the top, breaking the camera. (this was…

Camera Mount - Mullet Mod

I made the Mullet mod for my tiny whoop, but didnt have the cover, so I edited http://www.thingiverse.com/RockstarAlchemist 's version of the vtx holder and went with it. Best printed at 0.1mm layer height. Note: If you want a box that…

Busch and Muller IXOS Holder whilst charging

This is a caddy to securely store your IXOS light while charging or just on a wall. I use the shaver socket to charge in the bathroom, so this stops the light dropping to the floor, which would make me very sad. Category: Sport & Outdoors

Riese&Muller Load60 canopy frame clamp

Sticks from the canopy get used pretty quickly and fall through the holes. This little print helps to prevent it. You need: 4x M3 14mm 4x m3 nuts On the photos the nut hole is bigger, i've made it smaller later. Prints without support.

Samsung Refrigerator Mullion Flap Top Hinge Repair Clip

The small top hinge tab on the Samsung refrigerator mullion flap (the flipper that seals between the two French doors) often breaks over time, leaving the flap loose or unable to open and close properly. This 3D-printed replacement piece…

Mulle'nin kahve makinası parçası

Mullenin kahve makinası

RockTape - RockBlade Mullet 2

The Rockblades Mullet by RockTape is an all-in-one muscle massaging tool that will help you to go stronger, for longer. The RockBlades Mullet is a great portable muscle relief tool. Named after the hair style, the Mullet is all business…

Samsung French Door Mullion Part

Just an enhanced version of the mullion lip, director, end cap thing on Samsung French door fridges.

Mulle'nin kahve makinası parçası

Mullenin kahve makinası

Ikea Mullig feet protectors

Designed for gentle press fit. Tested and printed in Aurapol PLA.

Its a Mullet!

When I was putting this together, my loving spouse walked into the room and said the tapered back I'd put on this made it look like it had a mullet, so I decided to run with it. There are two versions of this model, The “v3” version is…

GE STRIKER TOP MULLION

GE refrigerator door flipper seal track (called striker top mullion) approximated and taller. The left door flipper was jumping out of the track on my new refrigerator and I am trying to print a temporary fix that has a taller track until…

Ge Fridge Upper Mullion Door Hinge Part 200D8156P001

Print with PLA or PETG and infill density at 100%

cat ears mullti color

i wanted cat ears for my headphones