920 modeli
Diese Spannmutter gibt es von Gardena nicht als Ersatzteil. Also habe ich mir selbst eine gemacht. Falls sich die Mutter nur schwer aufschrauben lässt, kann etwas Silikonspray auf das Gewinde gesprüht werden, damit geht es dann leichter…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A small nut driver with which you can also screw in hard-to-reach places. This nut driver also has a through-hole so that the protruding part of the screw does not interfere but simply passes through the nut driver. Width across flats for…
Wydruk około 0,95 €–1,17 € nettoWstępna wycena jednego wariantu
Da ich keine passenden Muttern für die Gewindestange (für eine DIY FilamentBox) hatte, hab ich mal kurz selbst welche entworfen. Am Anfang gehen die Muttern etwas schwerfällig aber wenn sie einmal drauf sind, kann man sie gut drehen. Ich…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
The MMU2s requires some love to get up and running reliably. In order to prevent constant babysitting down the road a proper test is required. Enter the MMUTT - MMU torture test: 1000 tool changes , 5 colors , printing time ca. 20h…
Wydruk około 12,70 €–15,53 € nettoWstępna wycena jednego wariantu
Buddy, but more festive. I remixed the original buddy model in Blender to add a Santa hat. Looks good scaled up a little. Print instructions The included .3mf is sliced for the MMU2S with black PLA in extruder 1, red in extruder 2 and…
Wydruk około 7,18 €–8,78 € nettoWstępna wycena jednego wariantu
Little Green Army Women : Mortar Platoon Commander : The Witch or Vidma of Bahkmut.
Wydruk około 5,16 €–6,30 € nettoWstępna wycena jednego wariantu
Schriftzug mit Herzen, "Alles Liebe zum Muttertag" Größe: 23,7 cm x 11,5cm x 3cm Update: Bohrungen für LED hinzugefügt Bitte nach dem drucken hier ein Make hochladen... Vielen Dank
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
Just a goofy little thing I did in blender using sculpt mode.
Wydruk około 9,02 €–11,03 € nettoWstępna wycena jednego wariantu
PLA Füllung 20% Schichthöhe 0,2mm ohne Stützen, ohne Rand
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
Tilted stand to replicate laptop angle. Given weight distribution you will need to lean it against something (eg another monitor) or use double sided tape to stick them
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
Die original Flügelmutter unserer Pastamaschiene ist gebrochen. Nun habe ich in Rhino eine neue modelliert und ausgedruckt…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
A plant pot inspired by the perfect structure of bismuth crystals. Used Filament: This model was printed using Brass High Gloss PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review…
MICHELANGELO TMNT REMIXED
Raphael (Teenage Mutant Ninja Turtles) support removed from original
LEONARDO TMNT REMIX
Donatello re-mixed
Updated 20230615 Someone said the "1.1 Part-Shell-Front" is too tight to insert into the body, so I modified it, you can try the new part now. ____________________________ Updated 20230605 I separated the body into 2 parts, now it is…
Eine Rose mit dem Schriftzug Mama. Vielleicht als kleines Geschenk zum Valentinstag oder Muttertag.
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
All of these mutes have been played and tested. The sound is similar to the stone lined mutes. In this generation I've thinned out the walls and opened up the stem holes to make them a little brassier and louder, especially on the bubble…
Herz mit Sockel zum zusammenstecken
WHY? I love my BambuLab X1 Carbon, yet it makes a hell of a noise. I do not have a basement or garage to put it in, so it needs to quiet down. Slowing down the chamber fan in the print profile has a huge effect, but I needed more. So, I…
In Egyptian mythology, Duamutef was one of the four Sons of Horus, tasked with protecting the stomach of the deceased. Represented by the Jackal, he is the guardian of the East. This model is a stylistic recreation of a museum-style…
Print the wings with the tips of its fingers facing the sky and a ton of supports. This means the thumb is facing downward, so make sure your support game is strong. You can also try printing it as is, but I wouldn't recommend that given…
The PrintBone practice mute: A practice mute for your trombone, bass trombone, flugelhorn or trumpet that is compact, plays with little resistance, is light and sounds well. The partials are in tune and it is quite silent. I let a few…
Eleganter Rosen-Teelichthalter für LED – stilvolle Tischdeko für jeden Anlass Diese wunderschöne Rose im 3D-Druck-Look bringt stilvolle Romantik auf deinen Tisch. Perfekt als Deko für Wohnzimmer, romantische Abende oder als besonderes…
Geschenkebox in Herzform mit "Happy Mothers Day" Beschriftung einmal in 20mm Höhe und einmal in 30mm Höhe If you like it ----> press like it :-)
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
These knobs are perfect for making your own star grip nuts or star grip screws. They are designed for metric screws and nuts with thread sizes M4 – M12 . The different versions and their dimensions are listed in the documentation. After…
Nicht AMS-Version: Das Filament muss für schwarze Schrift auf 1.5mm und für das rote Herz auf 1.9mm höhe gewechselt werden.
This is my variation of ANicolai's “ Mute for Violin and Viola .” Printing in various PLA+ as oriented without support. .16 layers, 4 walls and 80% infill. We tested these against an actual an metal practice mute. It actually stacked up…
Huge thank you to Printables user soozafone for creating Lucky 13 . You will need the Lucky 13 armature and skin. You will also need the Body v2.stl from RxR 's multi joints for Lucky 13 model. Assembly of the head is pretty…
UPDATE: Ignition is confirmed to be the same height as Under Needle and a NEW VERSION is made under this new information. V3 Is now at the accurate height of 27.6mm Now it has been confirmed that Bahamut Blitz's bit is called 'Ignition'…
Dragon Ball home decor
Um geplante Werkzeughalter am Prusa Mini+ zu befestigen, brauche ich Hammermuttern, natürlich selbst gemacht. Genutzt habe ich PETG, aber PLA sollte auch gut gehen. 15.06.2024: Modell zum Selberschneiden des M5-Gewindes hinzugefügt.…
The Loop Earbud Carry Case with Mute Storage is a compact accessory designed to keep your earbuds safe and organized. It features a unique lid that securely holds Mute rings while protecting your earbuds from damage and dust.
A simple clip designed to block the whistle of a recorder. This reduces the volume significantly and the user can still (somewhat) make out different notes. Alternatively, you could shove your finger into the recorder while the player is…
This model prints best with a resin 3d-printer but works also with FDM. Cowabunga! Juri
About An attachment that holds Loop Mute rubber inserts, compatible with original Loop Earplugs case. I have always wanted a way of carrying the Mute rubber inserts to further reduce noise when needed, so I designed this attachment that…
Drucke das Modell hochkant und aktiviere Support bis zu einem Überhangwinkel von 45°.
Hier kannst du dir eine Abdeckung für deine Mutter drucken. Ausgelegt ist die Abdeckung für SW17. Du kannst diese Abdeckung jedoch problemlos auf jede beliebige Größe skalieren. Viel Freude mit dieser Abdeckung ich bin sehr zufrieden.
All four Teenage Mutant Ninja Turtles
Beautiful mammut stool from IKEA. Elegant and beautiful If possible, place the floor of the stool on bed.
Drew up and created a 3D, multi-color, version of the classic 90s cartoon Teenage Mutant Ninja Turtles logo. Printed with Hatchbox Red, White, and Green and Prusament Galaxy Black PLA filaments. Drawn in Affinity Designer, imported as a…
Simple test print to give you enough layers to check out up to 5 materials at once. It's 1 cm tall and you can scale it larger if you want it. Update 12/13/2018: Added Solid version (FlowerSolid.3mf), prints faster without the inner…
Bobblehead from a scan of a classic TMNT figure for use with 3D Printy's bobble head spring and base Files for spring and base can be found here: https://www.printables.com/model/224836-emoji-printer-bobbleheads Print Settings I used…
Based on Sound-Maker's idea, I designed a Gardena anti bend nut to prevent the hose from bending. (https://www.printables.com/de/model/4324-gardena-spannmutter-fur-12-schnellkupplung/comments/755396) Gardena has these articles also on…
Based on Sound-Maker's idea for a 13mm/ 1/2", I designed a Gardena nut for the 19mm/ 3/4" system. I have tested the nuts with some hoses and also hose connectors and it works fine. I noticed that some threads are smoother or different…
StarCraft_Mutalisk_Fanart by Binhou. https://sketchfab.com/models/c6f44d4309cd46379e1eadd9d79453d5?ref=related To make Binhou's sculpture more printable I have thickened the wing membrane and split the model down the middle. The two…
Here we have a so-called star grip in size M5, M6, M8, M10, M12 and M16. Hier haben wir einen Sterngriff für die Größen M5, M6, M8, M10, M12 und M16.
Remix of JesusFreak vented riser. Split into parts to allow printing in different colors. The vents (blue) slide in the bottom and then the hole is plugged with the plug (red) by gluing the tabs at each end. The handle/toggle is designed…
This design is a 3d model of the classic Teenage Mutant Ninja Turtles manhole logo as well as the newer TMNT style. The prints are separated by color and everything should press-fit together. The only part that might need supports is the…
Eine Schraube mit rundem Gewinde und dazugehörige Mutter mit gerendelter Oberfläche zum direckten Drucken. Brim und Stützen sind nicht nötig. Ich habe nun diese Schraube in Petg (schwarz) und PLA (Gold perl) gedruckt die Schwarze mit…
The standard SAMLA Hat by Beaverworks wasn't quite what I wanted so I made my own! This version sits flush (or as close as I could get it) with the top of the U1, It therefore also doesn't cover any of the sides. It also comes with half…
Choose a color for the mask, one layer of red for tongue, the last layers for mask (in any of the colors).
Is it dumb? Yes. Am I dumber for making it? Maybe. Now you can enjoy the weirdness of the Mutt Cutts van from the movie Dumb and Dumber. Relive your favorite moments with Lloyd Christmas and Harry Dunne. It will not tell you what the most…
A simple and useful muteflute Printed at 0.4mm nozzle and 0.2mm layer quality with eSun petg The gcode file is for an Ender 3 V2
Use to mute seat belt, only use when you are not sitting it and not to replace the use of a seatbelt.
Eindrehbare Hammermutter Nut-8 M3 mit Sechskantmutter M3 niedrige Form (DIN 439), passend für Aluprofile zum Prusa Mini und MK3x. Für leichte Anwendungen geeignet. Anzugsdrehmoment ca. 1Nm. Gedruckt mit einem meiner bevorzugten…
a like is not a crime ;) Enjoy the Teenage Mutant Ninja Turtles Sewer Diorama / Playset it fits perfect for the IKEA Billy shelves its 760mm lenght 260mm deep 270mm high use 3x10 screws for floor /walls and 3x15 for walls /walls have fun
Something special - a small amazing shiny star that has fallen right from the sky. A small thank you to all of our supporters and the people who downloaded our models. We reached lately 100 000 downloads which is just so amazing for us!…
Um ein Handy als Kamera am Prusa XL zu befestigen, brauche ich Hammermuttern, natürlich selbst gemacht. Genutzt habe ich PLA, aber PETG und andere sollten auch gut gehen. To mount a cell phone as camera on my Prusa Xl I need some hammer…
Introducing the Seatbelt Muter, a cleverly designed 3D solution that effectively silences the persistent and bothersome seatbelt alarm in your vehicle, especially when carrying a heavy bag. While this adapter is created to enhance your…
Mutated zombie stalker from the Zone, wearing tactical gear, perfect for dark sci-fi and post-apocalyptic scenes.
DE Eine praktische hohe Rändelmutter oder Rändelschraube nach DIN466, Größen siehe Bilder Das Modell lässt sich ohne Supportmaterial drucken. Die 0,2 mm dicke Schicht lässt sich einfach durchstoßen. A useful high knurled nut or knurled…
Drehknauf ( Ø ca. 35mm) mit eingesetzter M6 Mutter Drehknauf ( Ø ca. 28mm) mit eingesetzter M5 Mutter Drehknauf ( Ø ca. 20mm) mit eingesetzter M4 Mutter Turning knob ( Ø ca. 35mm) with inserted M6 nut Turning knob ( Ø ca. 28mm) with…
This is an simple Holder for the AL-KO Mammut remote control. You can mount it with the 2 Screws or with an Double sided Tape. easy to print, no Support is needed.
Some stuff for the Teenage Mutant Ninja Turtles Sewer Diorama / Playset All wall decorations have a “click” system for the walls all multilcolor parts printed on the bambulab a1 mini with ams lite - sorry for that prusa! for a nicer…
Post-Apocalyptic Monster
Not my model, just remodeled/reuploaded to be printable with multiple colors Uses 5 colors Teenage Mutant Ninja Turtle for multi-colored FDM printing. Original Artist info: Teenage Mutant Ninja Turtle for 3d printing. Help me keep doing…
Hier eine mehrteilige Überwurfmutter (17mm) für den Gasschlauch von meinem Grill. Die Mutter kann auf dem Schlauch bleiben so das sie nicht verloren geht.
hey hoy- lets go … set 2 including: cctv + wall mount small Table wall mountable basketball pipe system + wall mount bar stool wall lights one cord + two cord enjoy it
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
Sorry in advance for the mess, this is just a quick post with some bad pictures of a design that I made in 2022 and never 100% prepared for release. I just found it again and thought it would be a waste to not post it to the community in…
Eine Schraube mit einem Durchmesser von 20mm. Dazu noch eine Mutter mit einem Durchmesser von 20mm
Gedruckt mit Bambulab X1C mit AMS Beschriftung ist individuell und die STL ist Blanco Passt für den 4,8L Topf inkl. Schüsseleinsatz und schützt vor Verschmutzungen und Staub. PETG 0,2mm Layer 0,4mm Nozzle
dev drum for 4x45 or 2x810 sand edges of the mouth for better sealing. You might need a pump to open the drum (same as jobo expert drum) for gear nozzle, you might need a 59*1.9 (outer diameter * cs) o-ring. tutorial V1.1 240428 Re-export…
A straight mute designed from a dessis wick mute. The mute actually fits and works, However, due too the plastic, there is way less resistance, and the sound is also quite funny due to the plastic and no metal:p Designed and printed by…
Shorter version of the Q1 adapter by muitxer so that it now fits the Arzopa A1. All the same print settings apply. I split the model roughly halfway to print in two parts. HEADS-UP: I have seen some users report, that their A1 Gamut does…
You will need support for underneath the little connectors on the "mute face. Print and assemble. Thank you please leave review.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A fully 3D printed RC harbour tug with a working azimuth stern drive. The two pods rotate 360°, giving it the same rudderless maneuverability as a real ASD tug — spinning on the spot, crabbing sideways, and full thrust in any direction.…
Maestro Muten genio delle tartarughe di Dragon Ball.Supporti abbastanza semplici da rimuovere,stampato con pla Polymaker Polyterra Cotton White.Usare delicatezza nella rimozione dei supporti,specialmente vicino alla fine del…
Eine Schraube mit einem Durchmesser von 10mm. Dazu noch eine Mutter mit einem Durchmesser von 10mm
Teenage Mutant Ninja Turtles Use any color for the turtle that you would like. (Including the baby blue for the girl turtle for true fans, even if that series was the worse one made). I print all my earrings and keychains with a .2…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A handy and easy to handle handwheel that can be fitted with a nut M8. Ein gut greifbares und gut drehbares Handrad das mit einer Mutter M8 bestückt werden kann. Print instructions Unassociated tags: Mutter M8 Category: 3D Printer…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Highly detailed Burer mutant inspired by the iconic psychic creature from the S.T.A.L.K.E.R. game series.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
T-Nut drucken mit PETG infill 100% ohne Stützen Düse: 0,4mm Schichthöhe: 0,2mm Die Fläche mit dem Sechskant auf das Druckbett. Zwischen Sechskant und dem Loch ist eine Drucklage um das Loch drucken zu können. Nach dem Druck einfach mit…
M5 Flügelmutter für Gardena 300 Spindelmäher. Nach dem Druck eine M5 Mutter mit Hilfe eines Lötkolben erhitzen und einsetzen. Category: Household
Źródło oznaczyło ten model jako treść 18+.
The Star Commuter 2000 is a compact passenger transport which appeared in Rebels and Resistance. It's essentially a bus that can go to space. Because of its simplistic shape, I've added more details to the surfaces then I normally would.…
M20x1.5 threaded blind stuffing to close unused M20-openings. Unused PG11-openings or PG13.5-openings in housings are also possible to close with this blind-stuffing set, but it is necessary to widen the opening in some cases (see details…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my files in one…
![Beyblade X Bit: Ignition [Bahamut Blitz] [UPDATED]](https://media.printables.com/media/prints/0800167a-7a80-41bb-9634-60d491147cf9/images/12253754_0739b8d3-ab35-407f-93f7-8b6065b2db4b_02a4ab4b-0335-41cd-b624-67dfcff7dece/ignition.png)
