Wyniki wyszukiwania: n40

RotorRiot Vision40 Prints

Print files for the Rotor Riot Vision40

Absperrschieber Absaugung fuer HT-Rohr DN40 / Blastgate Suction for HT pipe DN40

Ein Absperrschieber/Blastgate für eine Absaugung mit HT-Rohr DN40. Zusätzlich werden 4 kleine Schrauben benötigt, um die Teile zusammen zu schrauben. Nicht zu fest anziehen, sonst gleitet der Schieber nicht mehr richtig. Das Teil1 muss…

DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot - by overwerk and Scott Yu-Jan. Dieter Rams inspired. for Iphone 15.

DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot Upgrade your nightstand or desk with the DN40 Standby Dock ! This 3D-printed dock is designed for iPhone Standby Mode , MagSafe charging, and Apple Watch, plus it…

iPhone 17 DN40 Dock - Original Silicone Case- Made by: ScottYu-Jan and OVERWERK

Thanks to the amazing work of ScottYu-Jan and OVERWERK we have a cool stand for the iPhone. Marlfox did an amazing job by using parameters in Fusion to be able to adjust the size. What i did here is just figuring out the best size for the…

Vacuum Valve (Unterdruckventil) 50mm (DN50) +more (DN75/DN40)

If you are looking for a vacuum valve to be installed directly in your 50mm (DN50) pipe installation you might find this thing very helpful. As an example if you use one of those cyclone dust separaters and fear that your holding tank…

NEJE N40630 (30W) Laser Air Assist (.stl & .step)

This model is a drop-in replacement for the laser module's tinted acrylic window and slides directly over the laser's focusing lens. To achieve an airtight fit around the focusing lens, it is recommended to apply a few turns of Teflon…

Nikon N6006 / F-601 Film Door Latch Replacement (also fits N5005, N4004 / F-401, F-401X)

The film door latch on the Nikon N6006, N5005, and N4004 (F-601, F-401X, F-401) is notorious for breaking. Replacements are often over $10 for a piece smaller than a fingernail, so I modeled one and want to release it for free! This…

Standard DN40 to DN35 Adapter For Kärcher Industrial Line (40mm to 35mm)

I designed this for a Parkside wall-based vacuum sucker to be compatible with my Kärcher NT 70/3 Me Tc vacuum, that uses the thicker DN40 (40mm ID) standard instead of the DN35 found in household vacuum cleaners. I recommend deburring the…

osVAC neo DN40 to M32 and DN40 to F32

osVAC neo adapter DN40 to M32 osVAC neo adapter DN40 to F32 DN is parameterizable (35 - 45) using Fusion 360 Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports: No Resolution: 0.3 Infill: 50% Filament:…

osVAC neo M32 DN40

osVAC neo adapter M32 to DN40 DN is parameterizable (35 - 45) using Fusion 360 Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports: No Resolution: 0.3 Infill: 50% Filament: Geeetech PETG white…

DN40 - HT40 VERSCHLUSS KAPPE MUFFE END / CAP CLOSURE SEALING CAP PIPE TUBE

German: Verschlusskappe zu DN40 Rohren, Verschluss bzw. Endkappe. Einmal mit Schrift "DN40" einmal ohne.. geeignet zum Verschluss von Rohren, als Endstück. Abmessungen: Passend zu DN 40 Rohren, Materialstärke 2mm Andere Dimensionen in…

Deckel für Abwasserrohr DN40, DN50, DN75

Der Deckel passt auf HT/KG Rohre der Größe DN40, DN50, DN75

Cooler Master N400 Toolless HDD Bracket

EDIT: I've updated the model to have better hole support for the roof around the central locking pin. I've also uploaded the .STEP file version for easier editing if people need it. This is a reproduction of the tool free hard drive…

Parametric Pipe Plug for Sewer Pipes (DN32, DN40, DN50, DN75, DN90, DN110)

This is a parametric pipe plug designed for sewer / drainage pipes with rubber seals (HT / KG systems). The model is generated using OpenSCAD and supports pipe sizes from DN32 to DN110 . For convenience, I have also included pre-generated…

Neje N40630 Air assist

Air assist option for the NEJE N40630 laser with access to focus wheel. fits 5mmOD 2.5mm ID air assist tubing (tubing has air tight fit around inlet so no glue required) this was inspired by a few creators models but did not suit my needs…

Parametric connector for 20 mm DN20 empty conduit / Leerrohrverbinder DN16 DN25 DN32 DN40

Connects two 20 mm outer diameter empty conduits. Print without support. Don't forget to add a brim to make it stick. With stop lip inside - overhang-friendly chamfered design for support free printing - to prevent one of them from…

DN40 Iphone 13 mini dock without button

I remixed the model for anyone who prefers the Dock without the button

Vacuumdapter DN50/DN40 to hose inside 38mm

Saugerdapter DN50/DN40 zu Staubsaugerschlauch innen 38mm Das Gewinde sitzt sehr fest und dichtet sauber ab Vacuum cleaner adapter DN50/DN40 for vacuum cleaner hose inside 38mm The thread is very tight and seals cleanly

IBC tank DN40 connector with HEX

English To connect my IBC tanks to each other, or to realise a simple overflow, I created this simple connection. A 35mm hole in the tank is more than sufficient (I like to use a step drill for this), a standard seal from the DIY store…

Stopfen für HT-Rohr DN40 / Plug For Drainage PipesDN40

Ein Stopfen für HT-Rohre der Dimension DN40. Mit PLA sicher nicht hochtemperaturfest (HT). Auch für die benötigte Dichtigkeit müsst Ihr selbst sorgen. Aber als Geruchsverschuss allemal geeignet.…

Rohrverbinder EN40

In meinem Haus habe ich ein Elektro-Leerrohr mit 40mm Durchmesser vom Dach bis in den Keller für eine Photovoltaikanlage verlegt. Auf den Dachboden ist das Rohr unterbrochen um ein leichteres Verlegen zu ermöglichen. Verbinde wollte ich…

Hose connector 24mm hose to DN40 pipe (40mm)

The adapter is designed to connect a 24mm hose from a rain colector (like this ) with a DN40 pipe I printed it with PETG and it works fine since I installed it three months ago.

WIG / TIG filler rod / welding wire HT DN40 organisation system

I cut a 1 meter pipe into two parts. The lower part is 80 cm and the upper part 20 cm. You need: 1x Wandhalter Boden (Wallmount bottom) The diameter of the holes are bigger than the pipe's diameter because it has to fit the lid (Deckel)…

Bottle holder for Thetford N4241 / N4000 fridge - Fusion360 remix

Thanks to @Creo2005_265049 for providing the base with the f3d file. I changed it to fit Thetford N4241 / N4000 caravan fridge. To illustrate the dfference, on the first pic this part is clipped into the N4241 shelf, the original from…

Halter für Motorola PMMN4040A Mikrofonlautsprecher

Lochdurchmesser: 4,5 mm (für Montage)

Vision40 canopy O4 Lite with Flywoo Camera Shell and ND filters

Ugly file but prints fine, use tpu and supports

AIR ASSIST NEJE LASER N40630

Lid fitting for flexible corrugated ISO pipe (EN20, EN25, EN40)

Seal the pipe end with this TPU lid. Fix it with a zip tie on demand.

DN40 and ID 36 Vac Hose modified SHOPVAC CAMLOCK

German: Modifizierte Version für DN40 Rohre und Adapter. Kann auch für PVC-Kugelhähne verwendet werden siehe Bild. Der Hebelel wurde modifizert das der Magnet leichter rein geht und das er im offenen Zustand nicht mehr am Verbinder…

Adapter-N40-Makita RT0702CX2

Ich habe in meiern Werkstatt meine Staubsauger alle auf 40 mm HT-Rohr adaptiert. Daduch bin ich maximal flexibel. Also muss auch die Makita an das 40 mm System. Abei der passende Adapter Druck ohne Support; 0,4 mm Nozzle; 0,2 mm…

Argon40 ONE M.2 Raspberry Pi Case Dual Stand

A remix of the Argon40 ONE Raspberry Pi Case Dual Stand created by jerryfudd. https://www.thingiverse.com/thing:4789547 This version was simply made a little bit taller in order to be able to hold two Argon ONE M.2 Raspberry Pi 4 cases,…

Olight RN400 top mount

Top mount for Olight RN400 bike lamp. Uses the original plastic part but puts it on the top of the light instead of the bottom. Allows for mounting below handle bar and still using the “anti glare” lens feature. Hardware needed: 2x short…

HT-Rohrsystem DN32, DN40, DN75 und DN100 – Bögen und Verbinder mit druckbarer Dichtung

Nach dem HT50-Set hier die vier anderen gängigen Nennweiten: DN32, DN40, DN75 und DN100. In jeder Größe der gleiche Teilesatz, insgesamt 44 Dateien.…

IBC tank DN40 connector without HEX

English To connect my IBC tanks to each other, or to realise a simple overflow, I created this simple connection. A 35mm hole in the tank is more than sufficient (I like to use a step drill for this), a standard seal from the DIY store…

DN40 funnel in IBC tank lid

English For the supply line from the downpipe to the IBC tank, I use DN40 HT pipes. For this purpose, I have created a small funnel which can be screwed into a 35mm hole from above and secured from the opposite side with a lock nut. The…

Syphon Küche DN40 Rohr Verschraubung

Ich wollte und meiner Spühle die Platzverschwendung durch den Syphon reduzieren und habe ein Teil ersetz was noch einen weiter Zulauf hatte. Das Rohr ist in ABS gedruckt die Verschraubung in PETG

DN40 to DN100 (50mm to 110mm)

Reduction DN40 to DN100 (50mm to 110mm) ABS 2 wall Vytvořeno pro odvětrávání odpadu.

DN40 Pipe Clamp

This is a DN40 pipe clamp that is snug tight. I use DN40 pipes for the vac in my workshop. I printed it in PETG and PLA. Orientation with clamp tower upwards and clamp tower sideways are possible, but sideways seems a bit more robust.…

Klemme für HT-Rohre DN40 und DN50 (pipe clamp)

deutsch: Die Klemme in DN40 ist getestet und funktioniert. Sie hält das Rohr und liegt exakt an. Die Klemme DN50 ist ungetestet, wurde aber mit den gleichen Toleranzen erstellt. Version 3: Ich musste feststellen, dass die Rohre nicht…

dn100, dn50, dn40 construction tap / bouchon de chantier

Simple bouchon à poser sur des évacuations en PVC DN100 pour éviter les odeurs sur les chantiers. Simple plug for use with DN100 PVC drains to prevent odors on construction sites. [BuyMeACoffee]( https://buymeacoffee.com/lafeeleonie )

Malolo's screw-less / snap fit Raspberry Pi 4 Case for ARGON40 mini fan

Modified Malolo's screw-less / snap fit Raspberry Pi 4 Case for ARGON40 mini fan Used Microsoft 3D Builder to hack Malolo's Raspberry Pi4 top, Top_Base_SM_Cam_Disp to make room for the Argon40 mini fan

End cap for DN40 tubing

End cap for DN40 tubing. I use this for cheap outdoor antenna housings.

Regentonnenanschluss für HT Roht DN40 / Rain barrel adapter for HT tube DN40

Deutsch: Regentonnenanschluss für HT Rohre mit einem Durchmesser von 40 mm (DN40). Der Adapter benötigt eine Loch in der Regentonnenwand mit einem Durchmesser von 42 mm. Mit Hilfe der Mutter wird der Adapter in der Regentonnenwand…

N400 5x3.5" HDD Cage

This is a 5x3.5" HDD cage for the Cooler Master N400 cage. The N400 only has 2 5.25" slots, but it does have some space above the top slot. A 120mm fan screws to the front of the cage, ensuring ample airflow. I threw this together on a…

Vision40 Drone Case Gridfinity Compatible

Gridfinity storage box for the vision40 tinywhoop drone This stores the drone, batteries, battery charger, spare props, and usb cable for getting video off the drone. Basically everything that's unique to this drone (I only have the one…

Iphone 13 mini Braun DN40 dock with case

This dock should fit the iphone 13 mini with a case. This also uses off brand chargers instead of apple ones but with a little but of work can fit apple chargers too.

Cableclip for dn40

Clip

Air Assist Neje N40630 terminal

I printed and tried various air assists for my laser engraver but I found most of them too bulky so I chose the solution proposed by Tine Sedej ( https://www.thingiverse.com/tintek/designs ). To the laser anchored support (…

Adapter HT Rohr DN50 zu DN40 Siphon Rohr

Bei dem Objekt handelt es sich um einen Adapter von HT Rohr DN50 zu DN40 von einem Siphon Rohr. Der Übergang hat eine Wandstärke von 4 mm und ist daher sehr stabil. Mein Druck: PETG Support an der Nut für den Dichtring 100 % infill, damit…

Neje N40630 Spacer

Neje N4063 laser spacer from the base to be cut or engraved Print Settings Printer: Artillery Hornet Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 20 Infill: 20% Filament: xxx PLA xxx Category: 3D Printer Accessories

iPhone 17 DN40 Dock - Original Silicone Case WITH CUTOUTS - Made by: ScottYu-Jan and OVERWERK

Found this dock but discovered that it fit so well that the side buttons were registering as being pressed. I simply added cutouts for the power and volume buttons so they wouldn't get pressed.

DN40 Adapter Dust Commander

Für die Absaugung verwende ich HT-Rohre mit DN40. Auf den Bildern ist die Reduzierhülse noch nicht komplett festgedrückt. Die Hülse ist außen und innen konisch und damit sitzen Rohre und Hülse ohner Spiel.

Mount for Bosgame N4020 Mini PC

This is a mount for a BOSGAME N4020 Mini Computer (https://www.amazon.com/dp/B0DG8P4DGV)

10" 1.5U ASUS PN40 holder

10" 1.5U ASUS PN40 holder. Printing instructions 0.28 draft profile Frame fits on an Prusa Core One with easy in an +50° angle in Z Organic supports from the print bed needed No brim needed Happy printing =)

Keuffel & Esser N4081-3 Cursor Bars

Crumbling Cursor Causing Concern? Correct it Conclusively with this Clever Creation! Replace your crumbling K&E slide rule cursor bars with this! Quick print with integrated spring. This will also fit N4080-3 rules and probably others as…

simplified. Intex ZX300 Adapter to DN40 PVC

simplified. Intex ZX300 Adapter to DN40 PVC print settings: 5 wall / 50% infill & no support needed print settings tpu sealing ring: 3 wall / 100% infill / no support / slow speed ->max cooling

Auffangtrichter für Überlaufsiphon DN40 / Collector funnel for DN40 overflow siphon

Auffangtrichter für Überlaufsiphon DN40 zum Auffangen von Tropfwasser aus einem Überdruckventil der Heizungsinstallation. Einschließlich Kleinteilesieb. Die Rohrlänge beträgt ca. 170 mm, Rohrdurchmesser außen 39,9 mm. Gedruckt mit Bavafil…

Cover Motor X-Axis TMC2209 sensorless/fan4020

For use with fan 4020 and TMC2209 Print Settings Rafts: No Supports: No Resolution: 0.16 Infill: 25 Filament: Bembird ABS Black Category: 3D Printer Parts

Dust collection adapter DN100 - 2*DN40

Dust collection adapter from an incoming 100 mm hose to two 40 mm hoses. I use this on my router table to connect both the fence and the router itself to my dustcollector. Works fine with @MariusHornberger 's hose clamps. You have to…

Zyclon to DN40

Dies ist ein Adapter für einen standard Zyklonabscheider auf ein DN40 Lehrrohr. Gedruckt mit 0.4er Nozzle, 0,2 layer, ohne Supports in PETG. Der Zyclon hat einen DN50 eingang. ------------- This is an adapter for a standard cyclone…

DN40 to DN50 adapter

Print: TPU 0,4 nozzle 0,20mm layer hight no support Note: Not water tight not temperature resistant Bosch Dry Adapter: https://www.printables.com/model/1413113-dn40-bosch-dry-hose-adapter-schlauchadapter

DN40 Special Parts

This is a collection of specific DN40 parts I designed for an electrical installation using DN40 pipes as an outdoor underground cable duct system. Straight Pipe 40mm Base model of a straight pipe with minimum length (40mm). This design…

CN4015-3 stand

Simple little stand Print Settings Printer: TEVO Tarantula Rafts: No **Supports:** No Resolution: 0.2 **Infill:** 20 Category: Electronics

Outillage de filetage de tubes ondulés flsun400

Passe câble extruder extruder Flsunv400

Mount for Minis Forum N40 Mini Computer

Mount for Minis Forum N40 Mini Computer (https://www.amazon.com/dp/B07CJFZ1NL)

BM1 Home made Detector for Train DCC 1N4001

(French follows) Lenz was the creator of this diode bridge for detecting the presence of trains on the rails. This home made model features both a case and a soldering aid for the 5 1N4001 diodes. The case is designed to be screwed…

Screw-less / snap fit Raspberry Pi 4 Case for ARGON40 mini fan with Ender rail mount

Double remix -> Malolo's screw-less / snap fit customizable Raspberry Pi 4 Case -> Oldcoder's Argon40 fan hat addition -> my Creality Ender rail mount addition. Frame rails were added to the top case. This print is designed to the with…

DN40 vnitřní napojení

Vnitřní napojení pro hadici například kondenzátu do trubky s DN40. Jsou zde dvě varianty, jedna je kratší a má o 1mm menší průměr. Druhá varianta je větší a pasuje do běžných HTD DN40mm trubek dobře. Dále zde jsou zapuštění pro O-kroužky,…

N40 HP Microserver Case

N40 HP Microserver Case Takes 5 HDD. Print 4x HDD Brackets. 2x 80mm fans. 5x 40mm fans. (Dont need all 5, but i recommend it). Use heated inserts for all screws. Assemble motherboard first, followed by PSU and finally the HDD case. Lid of…

N400 2x3.5" HDD Mount

These attach in the side 120mm fan slots in the Cooler Master N400 case. They allow two 3.5" drives to be mounted there. They are attached with standard 120mm fan screws. The model Fscrewspacer is included to shorten the mounting screws…

Halter für HT-Rohr DN40 / Holder for HT-pipe DN40

Halter für HT-Rohr DN40 1x oben → Durchgehend 1x unten --> für Muffe Schrauben: → Innensechskant M6x60 → Sechskant M6x70 + Scheibe

Minisforum N40 Mini PC 1U Rackmount

I made a simple 1U rackmount bracket specifically designed for the Minisforum N40 Mini PC. You have access to all Ports aside from the headphone jack, which very few people use in the rack anyway. Dimensions: 13.3cm x 14cm

DN40 - Bosch Dry hose adapter / Schlauchadapter

DN40 - Bosch Dry 1000/2000/4000 Schlauchadapter Not heat resistent Not water tight Only recommend for 90° installation (vertical) Based on “ Stopfen für HT-Rohr DN40 / Plug For Drainage PipesDN40” by Klaus Krämer @KlausKramer_202713 DN40…

Universal drain plug for rough installation DN50, DN40, DN32

Universal drain plug for rough installation It keeps the smell out. Fits DN50, DN40, DN32

Nilfisk to DN40

Dies ist ein Adapter für den Nilfisk Alto Aero 21 INOX auf ein DN40 Lehrrohr. Gedruckt mit 0.4er Nozzle, 0,2 layer, ohne Supports in PETG. -------- This is an adapter for the Nilfisk Alto Aero 21 INOX to a DN40 pipe. Printed with a 0.4mm…

DN40 Pipes Camera Rig Feet

I needed a rig to get good top down shots for my upcomming projects like the 9mm gantry upgrade on the sovol sv08. So i quickly came up with the idea to build a camera rig with dn40 pipes. Here's a video about the whole thing: BOM: -2x…

Sencor SFN4031BK replacement feet

Replacement feet for the fan, print with the default orientation.

Waschmaschinen Anschluss DN40

Verbindungsstück DN 40 auf Waschmaschine oder Geschirrspüler

DN40 to 25mm dishwasher / Spülmaschine Abfluss Adapater

Tested some cuts for a solid fit --- you dont want a leaking behind the kitchen island :O

DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot - by overwerk and Scott Yu-Jan. Dieter Rams inspired. for Iphone 15.

DN40 Standby Dock – MagSafe, Apple Watch & Extra Wired Charging Slot Upgrade your nightstand or desk with the DN40 Standby Dock ! This 3D-printed dock is designed for iPhone Standby Mode , MagSafe charging, and Apple Watch, plus it…

Universal drain plug for rough installation DN50, DN40, DN32

Universal drain plug for rough installation It keeps the smell out. Fits DN50, DN40, DN32

Adapter HT Rohr DN50 zu DN40 Siphon Rohr

Bei dem Objekt handelt es sich um einen Adapter von HT Rohr DN50 zu DN40 von einem Siphon Rohr. Der Übergang hat eine Wandstärke von 4 mm und ist daher sehr stabil. Mein Druck: PETG Support an der Nut für den Dichtring 100 % infill, damit…

Klemme für HT-Rohre DN40 und DN50 (pipe clamp)

deutsch: Die Klemme in DN40 ist getestet und funktioniert. Sie hält das Rohr und liegt exakt an. Die Klemme DN50 ist ungetestet, wurde aber mit den gleichen Toleranzen erstellt. Version 3: Ich musste feststellen, dass die Rohre nicht…

Vision40 - 1 mm screws

This is a modified version of the RotorRiot Vision40 04 canopy with smaller 1 mm holes for shorter screws.

DN40mm to ID35mm TPU Vacuum Adapter

A printable adapter for the vacuum cleaner for screwing onto a 40mm vacuum cleaner hose. With 35mm inner diameter adapter. Recommended material: TPU Shore A 80-95 Orientation: Thread points towards the building panel, no support…

Air Assist NEJE N40630 Laser

Using a larger fan (20x25mm outlet) and a 3D printed air cone dimensioned to suit the fan's flow and pressure capacity (air guide and outlet not being too narrow nor too wide) you get a good strong airflow. Category: DIY

42 - Version40

The Answer. Also, just having fun trying out a some 3D CAD and printing ideas. More versions on the way. This one : 42 Tree This one prints fairly quickly, but is a bit tricky to put together. The idea was to make a "tree" that reveals…

Swan40 Case

Swan40 repo: https://github.com/shzhe02/Swan40 Case BOM: 3x M2 (OD 3.2mm) x 4mm brass inserts 3x M2 x 5mm screws (preferably button head torx (or hex)) 2x M2 x 10mm screws The case fits a 102050 1000mAh lipo battery. A smaller lid can be…