Liczymy pasujące modele…
Original file from MeowCha on GrabCad: FN FAL | 3D CAD Model Library | GrabCAD The OG file was just one big stl file. I separated all the files on this one and exported each of the parts. I also included an f3d file of the original file…
I want to print higher temperature materials, minimise warping, failed prints and contain the gases released by those materials. This is my build log to enclose my modified Creality Ender 3. One motivation for this project is to gain…
A charging mount for the Shokz Opencomm/Opencomm2 headphones. The original charging cable fits securely in the mount and gives a flat surface to mount using double-sided tape or 3M Command Strip. Allows the charger to be hidden behind a…
Designed a simple pipe coupler that uses 6x3mm magnets it has 8 magnet holes, allowing to place magnets however you like, the magnet hole has enough room to fit the head of an M3 bolt, so you can also screw couplers together or screw them…
Incom T-70 X-Wing Starfighter, first featured in The Force Awakens Features: Every part built for printing. Detailed cockpit. Articulated S-foils with smooth synchronous motion. S-foils lock open or closed. Swappable open or closed…
Mounts to hold two different Shokz headsets using their magnetic charging cables. Originally designed for the top edge of a computer monitor. Should be attached with foam tape, nanotape, or something similar.
Vanguard Class Titan designed in Fusion 360, the cover was not possible for me to design
reverse enginered from tm standard plastic airsoft body. Not optimized for printing
3D scans of my Wizards of Sorcery, set #2001. At least one model from the standard set was missing and seems to have been replaced in the set I purchased (bought in New Zealand in 1985). Missing the arch mage's spells. I don't own any…
3D scans from Grenadier Subterranean Terrors set. The Vi-Perdon has some damage that looks like I must have shot it with a BB gun when I was a kid. Kids are dumb. I do not own rights to these models. If a rights holder exists and wants…
3D scans from the surviving models form my Ral Partha Legions of the Liche King. I think I have most of the others but they all have some damage. The Balrog can be found here:…
UPDATE V2: Added small indents on each side of the barrel to give the darts more space to stick out. This is a remix of deusnefum's uncompensated hammershot mod that's made to work with hitchhiker4200's in-line cylinder. There is also a…
Print yourslef the most uncomfortable mug on the planet! It works just like any regular mug… it’s just very very uncomfortable to use. Please do not use this as a regular mug since it’s made out of plastic. It’s meant only as a joke!…
Here is the logo for ENCOM, the company that created the popular games Space Paranoids and Light Cycles!
Scan Incompleto lo-res - Demetra, Museo Nazionale Romano
I wanted a quick way to attach my AfterShokz OpenComm to it's charger.
Needed wall cover for for the water inlet in the bathroom. Couldn't find anything that looked good at the hardware store so I made my own. 2 sizes, 31mm which is good for larger inlet pipes, and a smaller 21mm for smaller pipes. no…
Credit goes to https://www.printables.com/@ThompsonStudios https://www.thingiverse.com/deusnefum/designs My tweaks/contribution here is very minimal. Also take a look at the various Hammershot cylinder options of Radioactive:…
Splitting the bottom uncompensated filler piece into two allows more forgiving tolerancing when shaving down the cut lines/hole IMO, as you can cut a little further for a loose fit, then superglue the halves into place in their respective…
(On hold - this works, but I've found that it need extra epoxy reinforcement, the bolt is insufficient to stop the inserts from sliding out. Working on a fix.) Uncompensated back and front pieces allow you to use an extended cylinder by…
Based on Mr. Rau's C4D mesh files. I didn't have any good starting options, and I was having lots of trouble measuring the disc properly. This helped get me about 80% of the way there, but I'm not totally done, or near the finish line.…
Fun door or wall decoration for Halloween. I changed the layer height for the different colors. Infill: 30% Layer height: 0.18mm
An addition to set of 9 already posted to inlcude triangle people (Triglavian Collective) and EDENCOM. As with the other set each printed in two parts (well 4 parts for EDENCOM to account for multiple colours on the logo) 1) coaster base…
These models are intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. These models present options for generic…
Incoming Mail Flag for the Gibraltar Patriot series mailbox Model #GMB515B01. This replaces the small yellow flag mounted to the side to show if mail has been delivered. I created this to allow me to see from the other side of the mailbox…
I lost some files between building this and now, and did not make a parts list when building. I have the key files included and can try to find specific missing models if requested. I posted this as there was enough work that went into…
Hallo, ich brauche einen Wandhalter für einen Switch also eben einen In Fusion erstellt. Er hat 0.2 Toleranz und kann liegend mit Support oder Hochkant gedruckt werden. Er passt eben so auf das Druckbett vom Mk3s+ damit das geht musste…
designed for Lancome perfume
Have you ever wondered why the handles on coffee mugs are in the orientation they are? How about why none are flipped 90 degrees? Would that truly be as uncomfortable as the meme suggests? Well wonder no further for I have the answers.…
I created these to hold engraver bits, you can push down on the short end and the bit tilts up for easy grabbing. probably an uncommon thing but it works well for me.
I recently acquired an old Lancom network switch, practically new in box. It came with everything, except the rack mount brackets. But hey...what's a 3D printer for, right? So I made myself a bracket that fits. The overall dimensions…
This mug has a very akward handle. It is a very good prank gift for someone. You will proably have to print it with supports for the handle. The inside should print good.
CMF Phone 2 Pro phone Back plate, that could be uncomfortable or very comfortable
You will finish your book in one night
Ikea Skadis charging mount for Shokz OpenComm headset.
Bare bones game insert to avoid having to bag everything in the box. You'll probably need to take the insert out every time you play the game since there's no finger space, but it's pretty lightweight overall. None of my cards are…
https://www.theuncomfortable.com/portfolio/the-uncomfortable-mug/ inspired by this design printed with bambu lab h2s gold pla sparkle, 0.2 layer, 10% infill, need support for the handle
Giden Sevkiyat - ıncoming Shipment
These models are intended for use with Down Range , a tabletop wargame focused on fast-paced, tactical-level combat and teaching players about the use of emerging technology in modern warfare. These models present options for generic…
Ein blödes Fidget. Viel zu groß um spaß damit zu haben. es ist 70 x 70 x 23 mm groß. Du musst beim Druck eine Pause einfügen um die Magneten 15mm x 1,6mm platzieren zu können.
A selfmade holder for the LANCOM station. just print it with 15% PLA and it will hold the LANCOM perfectly.
Propane Torch Valve Neck (INCOMPLETE & DANGEROUS) IMPORTANT NOTE: This project has NOT been completed or tested. It was just an idea where I was thinking if I could design a simpler Propane Torch Valve. Now, you might ask: "Why the hell…
