Wyniki wyszukiwania: nov

Sortowanie

3087 modeli

P
PrintablesAinon3Dtisk

New Year 2026 Headband, čelenka nový rok

Hello, Today I have a New Year's Headband for you 2026 . A great accessory for a New Year's party. Suitable for group photos. I used ASA/PETG as the material. No need to use supports!!! If you are interested in my work, the links are…

Pobrania
1322
Polubienia
102
Ocena
4,8
P
PrintablesTec

Pool skimmer flap / Bazénová klapka skimmeru

Print instructions I print with PETG, 0.6 mm nozzle that significantly speeds up printing and also makes the part mechanically stronger thanks to higher layer (0.3 mm in my case). Another non-default setting is use of 3 perimeters.…

Pobrania
508
Polubienia
44
Ocena
5
P
PrintablesIonutN

Lenovo Legion Go JoyStick Protector

An aternative to the existing Lenovo Legion Go Joystick Protectors

Pobrania
403
Polubienia
39
Ocena
4,5
P
PrintablesJ.R. Hofer

Lenovo Tiny Wall Mount

This design is for PCs that are in a cabinet out of sight. It uses four #8 Lath Screws with the exact ones being Everbilt SKU 540509. All you have to do is mirror (X-axis) the main piece in the slicer for the other half. Then print two of…

Pobrania
398
Polubienia
47
Ocena
5
P
PrintablesFilippo De Luca

Playmobil Novelmore cannon bullet

The model is composed of two parts, the stick and a flex ball to be assembled on its top. I have printed the stick with black PLA and the ball with blu Filatech FilaFlex40. The final result looks very similar to the original one. I…

Pobrania
362
Polubienia
60
Ocena
5

Lenovo Legion Go table stand

The idea is to place the console attached to the TV by connecting the original power supply, and use the other port through a USB-C to HDMI connector to the TV. The G-Code file is configured for a layer height of 0.2 mm @ 25%, using a…

Pobrania
255
Polubienia
32
Ocena
5
P
Printableshopa

A box for treats for dogs - New version/ Krabička na dobroty pro psy - Nová verze

Improvement of the original model. Vylepšení původního modelu.

Pobrania
237
Polubienia
37
Ocena
5
P
Printablesmih

Lenovo TAB M10 FHD Plus Wall Mount with Charging

Wall mount for tablet lenovo M10 FHD plus with the possibility of inserting a charging cable with the charger embedded in the installation box in the wall. The box is composed of two parts, after taking off the top part, the tablet can be…

Pobrania
222
Polubienia
15
Ocena
5
P
PrintablesDD3D

Tenda Nova MW6 wall mount

A simple wall mount for the Tenda Nova MW6 mesh node. It’s quite a snug fit.

Pobrania
221
Polubienia
17
Ocena
5
P
Printablesloller

Céčka (C, O, S, 3, §) + přidány nové varianty (B, bumerang, čtverec, čtyřlístek, D, "dlouhé D", E, EURO, G, pětiúhelník, srdce, šestiúhelník, trojúhelník)

Céčka mého vlastního designu, jsou tedy mírně jiného tvaru a rozměrů než ty “klasické”. Céčka mají osmiúhelníkový průřez pro lepší tisknutelnost. 3mf model obsahuje 5 ks od každého (18 ks) modelu (urychlení vlastníkům pomalejších PC -…

Pobrania
171
Polubienia
21
Ocena
5
P
PrintablesOsfald

LENOVO LEGION 230W charger power adapter supply hanger holder

My LENOVO LEGION 5 laptop spends most of time on the desk. So, I had to find the way to hang its charger under the desk top, that it doesn't take up additional space. That is the result, a simple hanger for LENOVO 230W charger (type:…

Pobrania
159
Polubienia
18
Ocena
5
P
PrintablesEliTheAsianGuy

Lenovo Thinkpad P1 Gen 5 Vertical Stand

I designed this because I wanted extra desk space. You can mount the laptop either closed or open, if you wanted to still use your laptop screen when it's docked. The front of the stand features an opening so you can still use the…

Pobrania
157
Polubienia
8
Ocena
5
P
PrintablesSTSUL.CZ

double-breasted dovetail joint partially embedded - oboustrabbý rybinový svlak částečně zapuštěný

Double-breasted dovetail joint partially embedded, teaching aid for joiner and carpentry in secondary schools. Oboustrabbý rybinový svlak částečně zapuštěný, výuková pomůcka pro obory truhlář a tesař středních škol.

Pobrania
151
Polubienia
22
Ocena
0
P
PrintablesLayerSolutions

Lenovo M10 Wallmount

Lenovo M10 (3rd Gen) Wallmount This wall mount is specially designed for the Lenovo M10 (3rd Gen) tablet. The tablet is inserted from the side , ensuring a secure fit while still allowing easy removal. The mount is perfect as a control…

Pobrania
138
Polubienia
4
Ocena
0
P
PrintablesSmash

Novo Nordisk FlexTouch case plus 20mm (V2)

Bigger storage container for Novo Nordisk flex touch pen 1mg + (V2)

Pobrania
129
Polubienia
22
Ocena
0
P
PrintablesCorallo69

GameSir Nova Lite MagSafe Phone Mount

A simple clip-on mount designed for GameSir Nova Lite controller , featuring a MagSafe attachment to securely hold your phone. Easy to print and easy to use, it’s made for quick setups while gaming or testing. This mount was designed…

Pobrania
116
Polubienia
7
Ocena
3
P
Printablesfuchsr

Moon Meeple for Nova Luna

Nova Luna is a nice game but the quality of the game component is bare acceptable minimum. So I very much liked snarcis's idea of using 3DWP's Moon Figurine as a meeple for Nova Luna. The hexagonal base, I didn't care for much. So I…

Pobrania
96
Polubienia
17
Ocena
5
P
PrintablesCharfield

Ark Nova X Tokens

Addendum to the excellent Money Tokens by Jarac on Printables. I love the 3d printed money tokens and wanted to add the X Tokens as well. As per the original instructions for the money tokens: “ Printed on a single nozzle printer with two…

Pobrania
93
Polubienia
9
Ocena
5
P
PrintablesBendeis

Stand for Lenovo Thunderbolt 3 Dock

Simple stand for the Lenovo Thunderbolt 3 Gen2 dock (Modelnumber 40AN) You will need to remove the rubber feet from the part of the dock that goes into the stand. It's a pretty tight fit, so depending on your printers accuracy you might…

Pobrania
87
Polubienia
6
Ocena
5
P
PrintablesPS Kamýk

Bias binder using laminator - Pomůcka pro skládání šňůrky k roušce pomocí laminovačky

Pomůcka slouží k usnadnění skládání šňůrek z rovného pruhu látku šíře 35mm s využitím staré laminovačky. Celý proces překládání a zažehlení vyžaduje 2 pomůcky (2 průchody pruhu látky), jedna přehýbá okraje ke středu látkového pruhu, druhá…

Pobrania
86
Polubienia
48
Ocena
5
P
Printablesfuchsr

Nova Luna Insert/Organizer

Simple organizer for Nova Luna . Features: four trays for game tokens (large enough for MNeMoNiCuZ's tokens ); a middle section for the moon meeple (or the fancier version here ); and a section for the tiles. Moon wheel and rules go on…

Pobrania
77
Polubienia
9
Ocena
5
P
PrintablesMaWoKo_3D_Druck

True Fruits Trichter/Funnel 750ml November 24

True Fruits Trichter für die 750ml Flasche gedruckt mit 15 Prozent infill und der 0,4 hf nozzle gedruckt. über likes makes und follower würde ich mich sehr freuen, Peace MazZe

Pobrania
73
Polubienia
10
Ocena
5
P
Printablescookiecrook

Nova chuck jaw mounts

Stackable or wall-mounted organizers for extra chuck jaws. Prior to this, all my chuck jaws were loose in the same box. Models fit most jaws for Nova chucks : Original Scroll Chuck, Nova Lite G3, SuperNova2, Titan III, etc. I also made…

Pobrania
68
Polubienia
13
Ocena
0
P
PrintablesBooks

Mustache Coin (Novelty, US Quarter, and Euro Sizes Included)

Coin with a mustache engraved in it. Includes versions that are US quarter sized and euro-sized for use with shopping carts. Uses art from PublicDomainVectors.org .

Pobrania
67
Polubienia
8
Ocena
0
P
PrintablesRogueAI

eMeet NOVA Webcam Privacy Shield

This print is a privacy shield for the eMeet NOVA webcam. I believe newer versions are sold with privacy cover but mine came without one. So I designed this privacy shield. You can simply slide it in and out of place. The USB cable on the…

Pobrania
61
Polubienia
2
Ocena
5
P
Printablesredaeq

Novostella E27 Smart LED Bulb (GD-BW09), Lampenschirm / Lampshade

Novostella E27 Smart LED Bulb (GD-BW09), Lampenschirm / Lampshade

Pobrania
54
Polubienia
5
Ocena
0
P
PrintablesDeal101

Jabra Heatphone Stand for Lenovo L580 Laptop

Headphone holder for a Jabra headset for my Lenovo L580 laptop. The holder is attached to the right-hand corner of the laptop. Printed with a Prusa Mini+. Support should be activated.

Pobrania
53
Polubienia
8
Ocena
0
P
Printableschvvkumar

Canon EF 100-400mm f/4.5-5.6L IS II USM Bahtinov mask

Bahtinov mask for Canon EF 100-400mm f/4.5-5.6L IS II USM

Pobrania
46
Polubienia
3
Ocena
0
P
PrintablesJiK

Klika novostavba - door handle 8mm

Klika pro nové dveře - hranol 8mm, použití v novostavbě pri vyberu designu dverniho kovani.... Proti zabouchnuti dveri v koupelne nebo WC. Door handle for new houses. Toilet, bathroom….

Pobrania
41
Polubienia
3
Ocena
5
P
PrintablesDaHouzKat

NOVA KOOL R1600 Towel Hook

Remix of the Designer Towel Hook that fits a NOVA KOOL R1600 Refrigerator

Pobrania
37
Polubienia
9
Ocena
5
P
PrintablesSTSUL.CZ

chamfered corner dovetail joint - vykosený rohový rybinový spoj

Chamfered corner dovetail joint, teaching model for teaching Technical Drawing created by carpenter Tomáš Bárnet. Vykosený rohový rybinový spoj, výukový model pro výuku Technického kreslení vytvořil tesař Tomáš Bárnet.

Pobrania
34
Polubienia
9
Ocena
0
P
PrintablesZdeněk

XR2206 Frequency Generator Box – No Supports (krabička na tónový generátor)

Introduction My DIY kit came with box components but they can't have worked, ever. The original box does not allow for how tall the 10-µF capacitors are. The original sides allow only 10mm, while the caps measure over 12 mm and the…

Pobrania
33
Polubienia
2
Ocena
5
P
PrintablesDU ccAT

Supernova E3 Tail Dynamo Mount

I made this because i fount a good deal on Supernova E3 Tail light, I could not find any mount so i made one, still experimenting with it so very unsure about its strength. installation is easy with the bolts provided with the light, all…

Pobrania
32
Polubienia
1
Ocena
0
P
PrintablesBažusLab

HC Litvínov coaster - MMU

HC Litvínov coaster - MMU

Pobrania
30
Polubienia
5
Ocena
0
P
Printablessurynkova

Trénování prostorové představivosti pro výuku stereometrie - pokrývání roviny a drátová tělesa

Studenti nebo vyučující vytisknou mnohoúhelníky k pokrývání roviny pro trénování prostorové představivosti a modely pro výuku vlastností elementárních těles a vzájemných poloh přímek v prostoru.

Pobrania
30
Polubienia
7
Ocena
0
P
Printablesbsfiosco

Bahtinov Focusing Mask for QHYCCD miniGuideScope

This is a Bahtinov Focusing Mask for a QHYCCD miniGuideScope. This greatly aids manual focusing by using three angled diffraction spikes to accurately focus.

Pobrania
30
Polubienia
3
Ocena
0
P
PrintablesLukáš Toman

Kyselina propionová

Kuličkoví model kyseliny propionové.

Pobrania
28
Polubienia
4
Ocena
0
P
PrintablesSTSUL.CZ

dovetail joint - rybinový spoj

Školní pomůcka pro truhlářské a tesařské obory. Model po složení stojí sám. Vhodný pro Odborné a technické kreslení a matematiku. Vhodné tisknout různobarevně. School aid for carpentry and carpentry. The model stands alone after assembly.…

Pobrania
24
Polubienia
4
Ocena
0
P
PrintablesLsGeorge

Dětský stranový klíč (Children's party key)

Náhradní klíč k dětské stavebnici

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesMart80

Lenovo Power supply holder

A simple laptop power supply holder for the table top. The holder is attached to the tabletop with a max. 25mm screw. Suitable for Lenovo's laptop.

Pobrania
23
Polubienia
6
Ocena
0
P
PrintablesMerrist

SUNSUN hladinový sběrač nečistot B - kos

Kos pro hladinovy sberac - na vatu pro cisteni

Pobrania
21
Polubienia
0
Ocena
0
P
PrintablesDU ccAT

supernova e3 pure 3 Dynamo mount for Velo Orange Porteur Rack

supernova e3 pure 3 Dynamo mount for Velo Orange Porteur Rack made this bc i couldn't find anything i liked online. I'm not super experienced so very uncertain about its strength. Installing is very simple all you need is a few zip ties…

Pobrania
19
Polubienia
0
Ocena
0
P

Spona na svačinový box

Držák víčka krabičky po odlomení původních držáků.

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesJoergH

Scangrip Universal Halter für Manfrotto Leuchtenstativ - Nova R bis Nova SPS 6

Scangrip Halter für Manfrotto Leuchtenstativ - Hält Nova R bis Nova SPS 6 Wird lose aufgesteckt. Die Leuchte wird eingehängt und kann gut verstellt werden. Nova R hält am besten, da der Bügel gummiert ist. Fotos zeigen Nova R und Nova SPS…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesMarcin

Bahtinov mask for Sky-Watcher BKMAK 150

I wanted to have the Bahtinov mask for my MAK 150 and couldn't find one, so I made my own. Based on the original, I have set it to be 175mm external wall diameter (part going into telescope's tube) and have 8mm border. I have added small…

Pobrania
18
Polubienia
2
Ocena
0
P

Česnový uzávěr PF 2022 drážka do strany

V případě dotazu mě kontaktuje.

Pobrania
17
Polubienia
0
Ocena
0
P
PrintablesCarletes359

AIRSOFT Taran Tactical Innovations (TTI) Combat Master Mag Catch Mechanism

DISCLAIMER: THIS IS FOR AN AIRSOFT GUN AND NOT ANY REAL WEAPON Requires a typical spring from a ballpoint pen. Printing recommendations: PLA/PETG (I used PLA+) 0.2mm layer height 80% infill 3 walls Tree supports ONLY for the catch flap…

Pobrania
17
Polubienia
3
Ocena
0

NovaLabs Maker Space in Fairfax VA - Logo

NovaLabs is a great community makerspace in Fairfax Virginia. This is our logo ready to be printed out chonky to sit on a shelf, and it also has a clip so you can hang it on the wall. It is designed to allow you to place a lightsource…

Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesJiří Fáry

Jmenovka/Cedulka -prázdná

jedná se o prázdnou cedulku kde si můžete v programu (např. tinkercad) dopsat vlastní text nebo dopsat např. permanentním fixem.

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesKiwibloke

Novelty Parking Sign

Overview We have a friend whose husband has a classic Ford Fairlane (Example picture attached, not actual car) and thought it would be a fun thing to give him a custom sign. Instructions Multi colour model with optimised 3mf project for…

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesHonzal

Jmenovka Jana

materiál PLA tryska 0,4 mm vrstvy 0,2 mm tisk bez podpor počet kusů naznačen v názvu souboru pro jiné jméno lze upravit soubory j-06.3mf a j-08.3mf jako osy používat filament kalibrace otvorů vrtákem 1,80 mm hlavičku osy otáčení vytvořit…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesREMLURELMI

Display Stand for Enovation/Murphy PowerView/HelmView 780 & 780B

Desktop stand for a PV780, or PV780B, or HV780 display. Includes holes for 8-32 mounting screws, or bezel mount. Recommended print settings: Layer Height: 0.2 mm or less Infill % : 15% Supports: No Print Orientation: Default as modeled…

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesDavid Hrkal

Šablona na otevřený rybinový spoj

Studenti si vytvoří praktický model šablony na otevřený rybinový spoj, kterou následně vytisknou a využijí při praktické výuce.

Pobrania
7
Polubienia
0
Ocena
0

LenovoPen Case

You have to print the file 2 times and then you have to put 16 5x1 magnets into the holes normally it is fine to put the magnets with a hammer in. But sometimes you have to glue it witch superglue. I'm sure you will make it. If you have…

Pobrania
4
Polubienia
1
Ocena
0
P
PrintablesPanther.inc

Remix původní špice lampičky nově se závitem a nožkou

Nožka lampičky s vnitřním závitem pro špičku a špička s vnějším z důvodu lepší manipulace při vytahování z hlíny.

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesDaniel Rychter

Skládačka Von Neumannovi architektury

Žáci dle předlohy vymodelují jednotlivé části schématu (destičky, šipky). Společně připravíme data pro tisk v PrusaSliceru, schéma vytiskneme a správně poskládáme.

Pobrania
3
Polubienia
0
Ocena
0
P
Printablesalena

Jak tradice nabývají nových podob

Žáci vyhledají lidové ornamenty na krojích, učí se je kreslit podle předlohy na papír, křídou vytvoří ornamentální výzdobu chodníku před školou a následně vymodelují a vytisknou 3D modely.

Pobrania
3
Polubienia
2
Ocena
0
P
PrintablesJajucha

Označení kmenových učeben

Žáci kroužku 3D modelování přišli s nápadem označit kmenové třídy atraktivnější formou - originální tištěnou 3D cedulkou, která bude pro každý ročník jiná.

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesCLERX

Antonov An-225 Mriya - 1:200

This model is free, please donate to one of Ukraine's relief efforts instead: https://donate.redcrossredcrescent.org/ua/donate/~my-donation?_cv=1 https://news.un.org/en/focus/ukraine/donate https://www.comebackalive.in.ua/ Model…

Pobrania
14 127
Polubienia
3423
Ocena
4,98
P
PrintablesTim

Lenovo ThinkCentre Tiny 10" Rack Mount - now with optional Keystone Sockets (M720q, M920q, P330, etc.)

I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…

Pobrania
5989
Polubienia
465
Ocena
4,97
P
PrintablesHextra

Ark Nova and Marine Worlds insert

Edit 12/18: I added a split version of the alternate player cards tray to accommodate smaller beds. I included a small connector area for basic stability, as the tray typically stays in the box. Ark Nova has been sitting on my shelf for…

Pobrania
2354
Polubienia
266
Ocena
4,85
P
PrintablesPatrik CK

Ender 3 V3 SE Side Mount Spool System (Holder + Guide) - Version 1.1 - Nov 3, 2025

Version 1.1 - Nov 3, 2025 - Beefed up the guide models for more reliable printing - Cleaned up geometry on bearing guide Version 1 - April 28, 2025 Watch the accompanying video about this mod Tired of the spool wobbling on top of your…

Pobrania
2313
Polubienia
121
Ocena
4,2
P
PrintablesDTibbs

Arctis Nova Pro Wireless Under-Desk Mount

Do you have an Arctis Nova Pro Wireless? Do you like a clean looking desk top? Do you not want to have to reach too far to adjust the volume or other settings on your Arctis Nova Pro Wireless? If your answers are Yes, then here is a…

Pobrania
2264
Polubienia
196
Ocena
4,91
P
PrintablesLukasz M

Lenovo legion go adapter

Adapter for lenovo legion go connect

Pobrania
2099
Polubienia
127
Ocena
4,25
P
PrintablesStougaard print

Lenovo tiny 10 inch rack mount

I have designed this for the lenovo M93P tiny but may fit other devices also. To print it either print it flat as on model or place it on the front

Pobrania
1837
Polubienia
182
Ocena
5
P
PrintablesSevereon

Johnny 5 Kit Card | Short Circuit | NOVA Robotics S.A.I.N.T

I wanted to challenge myself a bit and do some reference-based modeling in fusion360. I decided to work on Johnny 5 from Short Circuit. This was a fun and challenging project with many roadblocks that forced me to think outside the box.…

Pobrania
1834
Polubienia
407
Ocena
4,65
P
Printablesneale

Axianov Irish Flute

This is a fully playable open-hole "Irish" flute in the key of D. It has no keys. Intonation is good, staying in tune with other flutes videos I found on the Internet. To me, it sounds like a wood flute. I was able to play D and G major…

Pobrania
1798
Polubienia
237
Ocena
4,8
P
PrintablesRonanWarrior

Wall Mount for Lenovo M11 Tablet (2024)

Update 2025-6-25: Added fusion 360 archive file so other can edit or adjust file as they want. Please do not judge me to harshly, I did not label all of my sketches. A slim profile wall mount for a Lenovo M11 tablet so it can be used as a…

Pobrania
1686
Polubienia
70
Ocena
5
P

Lenovo Tiny Fan Shroud

I've been wanting to set up a Tiny cluster using my M720q model computers for a while, and with that have them use 10G networking. It seems that many people do use 10G network cards in these machines with varying success, the only issue…

Pobrania
1616
Polubienia
171
Ocena
4,83
P
PrintablesRobs

Lenovo Legion 5 Gen 6 Laptop Stand support Mount

A stand for the Lenovo Legion 5 laptop that allows you to close the lid

Pobrania
1479
Polubienia
94
Ocena
4,86
P
PrintablesCadel

Runový Hadí Drak

Runový Hadí Drak je výrazná fantasy miniatura, která kombinuje majestátní sílu draka s mystikou starých run. Tělo draka se spirálovitě obtáčí kolem zdobeného podstavce, jehož povrch pokrývají ryté symboly a geometrické vzory. Roztažená…

Pobrania
1365
Polubienia
257
Ocena
4,75
P
Printablesscarrson

NanoVNA-H4 Rugged Box

A box for your NanoVNA-H4. Includes room at the SMA connectors for you to leave your adapters on the VNA if you like (I have BNC adapters on mine). Fits the SMA calibration standards and has lots of storage room under the NanoVNA and in…

Pobrania
1358
Polubienia
160
Ocena
4,82
P
Printablesmightyohm

Under-Shelf Mount for Lenovo ThinkCentre/ThinkStation Tiny PC

I have a Lenovo ThinkCentre Tiny M90q PC that I wanted to mount under the bottom shelf of my lab workbench. I looked around for existing mounts and couldn't find anything that met my needs, so I set out to design one. I used four #8 x ¾"…

Pobrania
1330
Polubienia
101
Ocena
5
P
PrintablesLtChipotle

Lenovo Legion Go custom backplate + .step source files

Low profile, similar to stock backplate More holes ≠ better cooling Fan standoff to prevent the plate from pressing against the fan and blocking airflow Blocks turbulent areas so airflow is better directed Creates a negative air pressure…

Pobrania
1257
Polubienia
77
Ocena
5
P
PrintablesHawker

Lenovo Tiny M720q Top Vented Cover

The front plate is pretty hard to get off without breaking it. Be prepared to use Glue, the fit is also pretty hard to get right. Might be worth looking at my other model which is just a vented lid, you need to tin-snip the top out of the…

Pobrania
1221
Polubienia
72
Ocena
0
P
PrintablesSven Brähmer

Bahtinov Mask (Universal)

In order for the Bahtinov masks to work properly a certain focal length needs to be exeeded. The minimum focal length stands in the modelname (min750mmFL), you can still use the mask with a lower focal length, but I wouldn´t go to far…

Pobrania
1215
Polubienia
96
Ocena
5
P
PrintablesAlby312

Star Trek ship Nova Class USS Equinox

Original model from https://www.deviantart.com/metlesitsfleetyards. This is a scale model of Nova Class from Star Trek Voyager, the scale is 1:2000 (original length: 180m) The model imported in prusaslicer is broken but i'm able to slice…

Pobrania
1183
Polubienia
116
Ocena
0
P
Printablesyor42

Lenovo Legion GO Protective case

A protective case for Lenovo legion go tablet; All the protective cases available so far did not support controller separation, so I made my own. it also has slot for perpendicular USB-C adapter on top USB-C slot and kickstand. print with…

Pobrania
1181
Polubienia
83
Ocena
5
P
Printablesowlish

10 Inch Rack Mount for Lenovo Thinkcentre m920q (m720q) Tiny

I really liked Smelliot's version of the 10inch rack mount for Lenovo Tiny PCs, but the m900q's rubber feet are in a different position, so I remixed it and moved the feet channels to fit the m920q/m720q, and perhaps any other tiny's that…

Pobrania
1137
Polubienia
114
Ocena
5
P
PrintablesMotomami +

Astro Novalite - Dandy's World

Original model: https://sketchfab.com/3d-models/optimized-astro---dandys-world-4bd819cedc5342978a4b307ae8c831ce

Pobrania
1130
Polubienia
18
Ocena
4
P
PrintablesInsane_Man

Bahtinov Mask for Seestar S50

For manual focus on bright stars and objects, just align the crosshairs.

Pobrania
1106
Polubienia
54
Ocena
5
P
PrintablesMixmeister

Lenovo Thinkcentre Tiny M720Q/M715Q/M920Q 19-inch rack mount

This is a Remix of this So it now fits a 19" I needed 2 of this mount for a 19" side by side …. i have adapted the mounts from @Mauker, so you can also just print one side and use some of @Mauker Modular Rack Mount for the other side as…

Pobrania
1097
Polubienia
100
Ocena
4,8
P
PrintablesRoboMagus

Lenovo Legion 5 Pro Riser Feet

These feet slide onto the back of the Lenovo Legion 5 Pro laptop for a fairly secure fit. You can pick up the laptop and the feet will stay attached. They do not interfere with the monitor hinge, so you can open / close the lid with the…

Pobrania
1090
Polubienia
88
Ocena
4,92

NexGen3D: Lenovo Legion Go (LeGo) CyberDeck Mod

If anyone would like to support me and my work, please feel free to donate/tip me on Ko-Fi: https://ko-fi.com/nexgen3d Update: Added Step file for the project. Introducing the NXG3D LeGo CyberDeck: Personally, I think Lenovo should have…

Pobrania
1048
Polubienia
128
Ocena
5
P
PrintablesBearded Printer

Novelty Ice Cream Cone Containers

Ever felt like you need a large novelty container in the shape of an ice cream cone? Well, HERE YOU GO! You have the choice between a soft-serve ice cream cone and a traditional scoop of ice cream. Enjoy! Print Instructions: No supports!…

Pobrania
1042
Polubienia
194
Ocena
4,89
P
PrintablesEerko

Ark Nova + Marine Worlds expansion Insert

This insert fits the Ark Nova base game and Marine Worlds expansion. In the pictures we've used alternate money tokens. Update Nov 9 2023: added sleeve_holder_2_v2 as replacement for card_holder_2 if you sleeve your cards. Update Nov 11…

Pobrania
1038
Polubienia
120
Ocena
4,86
P
PrintablesEon3D

Nova the Unicorn – Small, Sweet & Full of Charm

Meet Nova, a tiny unicorn packed with cuteness! Designed as a quick 20-minute print, this monocolor version is light, smooth, and super easy to make. Perfect as a pocket companion, Nova adds a touch of magic wherever you go. No supports…

Pobrania
983
Polubienia
91
Ocena
5
P
PrintablesD1ngsbums

Lenovo ThinkCentre M Tiny stand

This is a stand for the Lenovo ThinkCentre M9xxq Tiny series for upright use. It eliminates wobbling and gives it a firm and save stand. It might be useful for the other series (e.g. M7xxq and M8xxq) as well. It's designed for a device…

Pobrania
983
Polubienia
68
Ocena
5
P
Printablesasd913

Lenovo Thinkcentre Tiny Stand

I have a few Lenovo Thinkcentre Tiny pc's. One came with the stand. I replicated the oem's design so I can have more stands for my other pc's. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution:…

Pobrania
980
Polubienia
99
Ocena
5
P
PrintablesMike Ant

Pool vacuum cleaner / Bazénový vysavač

The standard pool vacuums sold didn't suit me because they have little pull due to their size and wide openings. I needed a vacuum cleaner that was just big enough, that was low and, thanks to the larger pull, would pick up small debris…

Pobrania
965
Polubienia
117
Ocena
5
P
Printables_ _

Scissor mechanism for Lenovo laptop keyboard

Built for my Lenovo Flex 5 14". One of the keys' scissor mechanism broke. I got the measurements off it and modeled this. You can either print everything in place, or split the two bodies and print separately although it is tricky to mesh…

Pobrania
939
Polubienia
34
Ocena
0
P
Printableslyconsys

Tri-Bahtinov mask for Celestron C8 / EDGE HD telescope

Tri-Bahtinov masks help to achieve a very precise collimation and focus on telescopes. I have designed this mask to fit on Celestron C8 and EDGE HD SCTs. General information about Tri-Bahtinov masks can be found here:…

Pobrania
932
Polubienia
31
Ocena
5
P
PrintablesRene

LENOVO ThinkCentre Wall and Under-Desk Mount

edit 02.11.2024: added version with screw holes on the top. For under-desk mounting. edit 24.01.2024: Slots for the rubber feet set further towards the center. Curves instead of corners on the narrow bridges. This wall bracket is mounted…

Pobrania
912
Polubienia
62
Ocena
4,5
P
PrintablesAnUnknownSource

Lenovo Tiny PC 2x 1U Server Rack Mount

Printed with Ender 3 V2: Faceplate/Strut/Bowtie/Pins: Overture Starry Blue PETG No Supports Brim 25% Gyroid Infill 4 Walls - Outside to Inside - Alternate extra wall 0.2 Layer Height Sled Parts: Overture Black PLA Pro No Supports No Bed…

Pobrania
905
Polubienia
124
Ocena
5

NexGen3D: Lenovo Legion Go Audio Enhancement Protective Case

Simple stylish protective case for the Legion Go with integrated audio redirectors. Recommend printing from PETG or PETG-CF, I did mine in PC-CF, avoid stiff plastic like ABS and ASA. Supports are needed at the bottom for the USB-C access…

Pobrania
902
Polubienia
69
Ocena
5
P
PrintablesHermann S

Lenovo Tiny 10 inch Rackmount with Keystone slots

Edit: If you have some weird-***-shaped computer like @Emplar_201570 , this model might not fit. Apparently it's my responsibility to check that. Prints without supports! I printed it in ABS, but I guess PLA is fine as well (as long as…

Pobrania
881
Polubienia
120
Ocena
4,44
P
PrintablesEnigma

Arctis Nova Pro ear pad adapter

The Arctis Nova Pro uses a different ear cup mounting mechanism than past headset versions, preventing the use of existing replacement ear cups. Along with the availability of compatible replacements only using faux leather (hot and…

Pobrania
851
Polubienia
40
Ocena
4,5
P
PrintablesITG Gear

3D Enclouser Case for Lenovo M90q gen1 ft. MSI RTX 3050 LP, 3.5in LCD Screen

Sharing my custom 3D enclosure design for the Lenovo M90q Gen 1, featuring the MSI RTX 3050 LP, a 3.5-inch LCD screen, and an RGB fan. This project involved designing the 3D case model using SketchUp and printing it with PETG filament on…

Pobrania
845
Polubienia
48
Ocena
0
P
PrintablesDavid Fish

Lenovo Tiny M720Q M720X M920X Top Cover Chassis Lid with 120 or 140mm Fan Opening

Replaces the top cover of a Lenovo Mx20Q/X and provides fan opening for 120 or 140mm fans. It's not a total like for like, so you'll need to bond the front panel to the case as the supplied screw won't be enough to hold the panel on with…

Pobrania
836
Polubienia
73
Ocena
4,5
P
PrintablesRqoo51

Steel Series Arctis Nova Pro Wireless Under-Desk Mount

A under desk mount for Steel Series. Should just slide in from the front.

Pobrania
818
Polubienia
60
Ocena
5