Liczymy pasujące modele…
Dieser Halter ist für eine Motorsäge, Heckenschere oder auch andere Geräte gedacht die hängend gelagert werden. Für eine gute Haltbarkeit sollte die Füllung mindestens 80% betragen. Viel Spaß beim drucken. Bitte geben Sie mir noch ein…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
My take on a toolmakers clamp. This is the style of clamp that uses the front rod for clamping and the rear rod for leverage. You may be looking for a PARALLEL CLAMP, which has both rods threaded for tightening. Available here: PARALLEL…
This toolmaker's style vise uses a short screw angled into the base that pulls the jaw both down and forward. The screw head at the base-end fits into a cylindrical cam that can be repositioned to one of several notches to give it an…
Here's my model of Malcolm's Gun From Firefly(Aka Moses Brothers Self-Defense Engine Frontier Model B). I scaled it up 300%(I had the model printed diagonally to fit the print bed). You might want to sand the connection points if they're…
Insert one M6 nut into the black bottom of the model and solder it into the part, push the whole bottom through the orange part and seal the black part with an orange ring to prevent the black bottom from falling out. Insert the M6x70…
I printed it 98% so it pressfits into position. Vary depending on the tolerances of your printer which is surely better than mine. Stampato in scala 98% cosi che si incastri perfettamente a pressione, vedete voi in base alle tolleranze…
I wanted to print one of these for my brother as a present, but could not find one that allowed me to print the parts properly in different colors so I remixed two existing designs and modified them (cut them up, and added some features…
Malcolm Reynolds Pistol - Firefly
This model is compatible with the lego system.
FilaMan Revamped This is my version of a scale for the FilaMan project. Its an NFC powered automatic scale for Spoolman . I was going for a clean elegant look, hiding as much of the electronics and cables as possible. Please check the…
No matter which Artillery Sidewinder X2 review I saw - all, myself included are unhappy with the original Artillery Filament spool holder. It is wobbly, tends to fall apart, and the filament sensor holder is awkwardly positioned. Thats…
This is a fully self-designed (in Fusion 360) lighthouse, 1.3 meters high, 3D printed on a large Hypercube with 0.2 layers - yes it took a long time to print! I found several pictures of a lighthouse in Gotland (Sweden) and that was the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a 123D Catch 3D scan of an Olmec sculpture replica at the Smithsonian Natural History Museum. It was made by Nick Bontrager: http://www.123dapp.com/catch/Smithsonian-Natural-History-Museum-Colossal-Head-4-replica-/5111161 I edited…
Video: https://www.youtube.com/watch?v=I5nCNQVp2t0 Hey Everyone! This is my rendition of the BBC Sherlock's Door Ornaments, Including the Knocker, The number (221B) and the letterbox, Enjoy! TO PRINT: simply print out all the pieces and…
Stabilizes the wobbly filament roll holder from Artillery. Print and clamp in between when the original filament holder is installed on the printer. If you like to replace the spool holder completely, see my newer design…
Honeycomb grille for Latin America Renault Clio , years 2013 to 2016 ( Clio Mio ). The file can be split into parts to fit your printer bed (in my case, I split it into 6 parts and made 3 on a Creality Ender 3 and 3 on a Longer LK4PRO.…
Enigmatic like you, this keycap is sure to turn heads. You deserve to have the more class than everyone that comes after, make ancient cool.
This is a part of our Grimworld: Battle for Underholme project! Join the fight on the side of one of the mighty dwarf armies. More information on our website - sign up to get 2 additional models! Subscribe to the pre-launch page on…
‘My name is Sherlock Holmes. It is my business to know what other people don’t know.’ This is a keychain that I made after finishing reading the Sherlock Holmes canon again. The game is afoot, Watson!
I remixed the side spool holder from BastR, basically i removed the opening for the M3 nuts and made the boreholes for the original spoolholder the core size for M3 screws. So i could screw directly in the plastic, because i had no M3…
All houses are simple blocks and streets are slightly raised, it's a simplified 3D map of Stockholm. But nevertheless pretty cool :-)
I created a stand for the Malcolm Reynolds Gun from Firefly model I remixed to include in a present to my brother. The stand includes a place to put a small model of Serenity on it. No supports needed. Malcolm Reynolds Gun from Firefly…
This is a simple model for a Colman cooler drain plug. It should also work with other cooler brands assuming that the plug diameter is the same. I printed this with PolyFlex TPU95 for good flexibility and rigidity.
Public domain model of an Olmec Head by Legendjnt . Originally uploaded to Blend Swap .
We sell printed units, please contact us : [email protected] or visit our website/webshop: http://www.ytsio.nl Keep your workshop tidy with these toolmounts. I print them with PETG; 4 wall; 6 top/bottom; 25% Gyroid infill.
Automatic Klipper/Spoolman configuration with RFID-tags This model is part of a system I use to select Spoolman spools from RFID tags attached to spools in klipper. Klipper can then verify that the right filament is used before printing…
Wanted a 221B sign for my office door. designed in Fusion 360. I haven't printed this yet but there shouldn't be any issues, plan on 2 color changes so i made it in levels Category: Household
Necessary equipment for longer RC expeditions. Not cooling. Maybe next time. You will need (8) M2*5 (2) Hinges 8x10mm ( https://www.aliexpress.com/item/1005005574915000.html ) UPDATES 2025-03-09 - FridgeS_bottom_v2 - Added holes for…
A simple lampshade made for the Ikea Holmö or any E27 lamp base. The base can be printed in a darker color for contrast. The main lamp shade needs to be printed in vase mode. Print the lampshade in a natural/translucent/white filament,…
a principio criei essa tela para customizar meu gabinete Sim+, mas pode ter outras aplicações
Small Toolmakers Clamp Find the large one here! I designed this little toolmakers clamp for light clamping work such as glue up s. Obviously its not designed for actual machining work but its quite strong for a printed clamp ! Hardware…
Einfach beide Teile zusammenstecken und vorher einen Tropfen Sekundenkleber auf die Steckverbindung.
Coin with the profile silhouette of Sherlock Holmes engraved in it. Uses art from PublicDomainVectors.org
Sidewinder X2 spool holder with possibility to secure the spool onto the mount based on the great design by freakyDude . The additional bar placed in the center hole of the spool will prevent tangled 250g spools (and of course also bigger…
Spare hinge for loungechair Hanstholm (Jysk). Print with supports.
Large Toolmakers Clamp Find the small one here! I designed this large toolmakers clamp for light clamping work such as glue up s. Obviously its not designed for actual machining work but its quite strong for a printed clamp ! Hardware you…
A Golmen from the game Clash Royale
Simple but sturdy wallmount for Dolmar MS-340. Might work for other models as well. OpenSCAD file included for easy change. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0,2 Infill: 25%…
I would like to use the universal spool filler system as a top mount for the Qidi Q1 Pro. https://www.thingiverse.com/thing:3020026 https://www.printables.com/model/825275-filler-spool-holder-2020-mount And I have a lot of 2020 extrusion…
Impeller for a Kolmeks AP-32/2 pump, 130 mm in diameter. I made it in two versions: Solid impeller. Two-part impeller I’ve attached both STL and STEP files.
Remixed a model of the Serenity ship from Firefly as part of a present to my brother. Shrunk it by 50% and cut it in half so it printed easier. Model is meant to be glued together. This model is meant to go on the stand I created for the…
Bookend for you Sherlock Holmes book collection.
This is a typical Toolmakers Clamp. I made this using the printed parts plus 2x 8mm threads and a 3mm screw (6mm long) to hold the retaining plate. The 8mm threads I used came from cutting the heads off of bolts 85mm long, but two pieces…
Maceta con forma de Colmena de abeja mas un adorno/gia con forma de insecto
These magnifying glasses are upgrades for the cardboard Investigation Markers in Holmes: Sherlock & Mycroft (aka Holmes: Sherlock Gegen Moriarty). Print instructions 0.2mm 15% infill If you like what I'm doing… … consider buying me a…
This is a giant Mexican stone Olmec head scanned with a Creality Otter. Model stands 101 mm in height and uses 95g of filament.
Replacement scales for George Wostenholm I.XL straight razor and others. If you only need blank scales, just mirror the blank scale in your slicer. For best results, print in resin. Please post your makes. Enjoy Print Settings Printer:…
This an edited version of the giant Olmec head. I made a flat base, made it bigger and added a hole with a ridge on the back so you can hang it on the wall. The one in the picture is printed from ABS and painted with gold, copper, silver…
Dies sind 2 Modelle für die Abdeckung der großen Öffnungen im letzten Holm vom Renault Master 3. Ein Modell hat einen Rand mit Haltenasen, die 7 mm hoch sind, das andere hat 9 mm. Da nicht alle Ausprägungen im Holm gleich sind, muss man…
This is a replacement Oil Cap for a Dolmar ES-30 electric chainsaw. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: Yes Resolution: 200 Infill: 40 Filament: No Name PLA Category: Replacement Parts
Light and easy to print light switch glow in dark frame! Uses about 2,3g of filament Perfect fit to light switch: Polmark Dimensions: 85,6 [mm] x 85,6 [mm] x 3,6 [mm]
The Oil-Cap of my Chain Saw Dolmar 112 was broken. So I´ve built a new one. It also should fit on Makita Chain Saws. the cap is made of PETG, 0.2 mm Layer, 25% Infill, the seal is made of ninjaflex, 0.2 mm Layer, 100% Infill
Es un cuelga macetas creado para que encaje en una celosia de ike askholmen con una apertura en el rombo de 12x18 cm. el agujero es para macetas de 10 cm de diametro. Si no encajara con tu abertura de celosia o con el diametro de la…
One to spool them all... more or less. A spool holder that is compatible with spools from 16cm (300g) to ~30cm (5kg) in diameter. I've been using the previous version for four years now and it never failed me. This one is even better!…
How to construct an egg cup and design it in a CAD you can see on https://www.nerd-corner.com/solidworks-tutorial-egg-cup-with-solidworks-revolved-boss-base-and-fillet-feature/
This is a scale model of downtown Stockholm, Sweden, designed from LIDAR data. It covers a square 1.9km / 1.2mi / 6250' on a side. When printed in mm, it is 5 inches (12.7cm) at 1:15000 scale. City models looks best when printed with 0.1…
My old Holman 20m retractable hosereel bracket failed from UV exposure and weight of the reel. I designed a direct replacement that works well. I've only had it in use for 2 weeks so far but seems to be holding up well. Printed in PETG…
Uzumaki Junji Ito CoolMaster Accessory Stencil
Only 7 knives can be accommodated in the Knife Deck of Holme & Hadfield. That was quickly too little for me. With the Knife Pillar, the Knife Deck can be immediately expanded by 5 knife places. The knife pillars fit perfectly into the…
Our window is too narrow for our window fan so I designed this foot to stand it up in front of our window. One seems secure but I recommend printing two if you have kids or pets that may knock it over. Fits model HAWF2021-N. Print…
Diese Figur ist ca im Massstab 1:24 und ideal für Resin Druck
Dolmabahçe Sarayı Saat Kulesi İstanbul Türkiye Lithophane
I.T. DEPARTMENT - REYNHOLM INDUSTRIES, License Plate Frame Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 25 Category: Signs & Logos
Funny Face for IKEA BOLMEN step stool You need to reorient all the parts so that they lie flat side down Resolution: 0,2 Supports: No Infill: 20% Filament Material: PLA Click here to wach the video =) https://youtu.be/HG8etkyp1hI…
Glue the IKEA brush holder to the flat part and then glue the two parts together (or fix them with a couple of screws). Fix everything in a corner using glue once again.
Eine gute Idee für den Griff einer Schubkarre, proportional auf 25mm Holm verkleinert. Es hilft, den Holm glatt zu schleifen, dann habe ich den Griff mit einem Gummihammer in Position gebracht ;-)
Compatible with the Holmes 4" Mini High-Velocity Personal Desk fan . A simple remix of Noctua's airflow amplifier, adapted to fit the mini-fan linked. Best case to chamfer the mounting holes with a Phillips-head screwdriver before trying…
There are two styles of clamps included. They are very similar, but have a slightly different form factor and method of tightening. Of the two I recommend the Toolmaker's clamp, but I have included both for completion's sake. For both…
Welcome to Neolithic Europe! Legado3D is an archaeologist that does digital preservation of historical legacy, and they are taking us farther back in time to the Neolithic period with this model! A Dolmen is a tomb composed by a circular…
The Trundhold Sun Chariot is a masterpiece of Bronze Age artistry. I am attempting to recreate this 3,500 artifact in a couple of stages that I'm documenting on YouTube if you want to follow along. I'm posting the files on the request of…
Grill for fans with 230mm on the long and 200mm on the short side. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: SUNLU PLA Category: DIY
After several years the plastic wall mount on our Holman Hose Real Broke (snapped at top and bent over). This reel: https://www.holmanindustries.com.au/product/20m-retractable-hose-reel/ These things weigh a lot, especially when full of…
I watched this video but was slightly disappointed in the non-parametric solution. I used the ‘subtractive patterning’ and ‘keep it all as one body until the end’ methods to make this fully parametric. I'm sure Kristian could do it in a…
The 2022 remake of the classic Scotland Yard is called the Sherlock Holmes Edition and is a very nice game, the updated game mechanics add a lot of fun. Unfortunately the pawns and tickets were just thrown in ziplock bags, luckily the box…
Step into the world of Victorian mystery with this masterfully crafted 3D printable Sherlock Holmes figurine that captures the legendary detective in his iconic pose. This detailed STL model showcases the famous sleuth complete with his…
A water sprayer holder replacment for a holman water sprayer wand. source files for easy resize for a broom etc.. I printed in ASA with 15% and 2 walls and it seems to be fine
Abdeckkappen-Unterholmverbreiterung OEM 321 853 140A Passat 32b GT "Schwellerverbreiterung"
Wanted more control over the AC flow, so I made an adapter to Biltema or any other 140 mm hoses. Bayonet lock for quick removal I printed in .35 height and support on build plate only. Took 10-12 h in the suggested print setting. I'm…
I wrote a small program to generate this. Also made it to fit that frame I got from Target. I wanted a less visible seam so I chopped it off along the circles.
This organizer contains quick start boxes for the two players, separate card trays for the character and clues decks, and one bin for the investigation markers. IMPORTANT : I was given the German version of the game (published by Kosmos),…
This is a remix of the Stockholm Skyline by NACHO_COOPER. I was in need of a board for my keys and found this nice looking skyline of Stockholm, so I added some knobs for keys and voilà! Check out the original for a sign version of the…
A repair job to a hundred year old stereo viewer that had some missing parts. Here's a vid showing how the bracket is assembled: Except for the handle, all parts print without support. If you found this useful, it would bring me great joy…
A stylized silhouette of Stockholm featuring iconic landmarks, with the city's name integrated into the base of the skyline.
no necesita soporte (obviamente) , boquilla de 0.1mm a 0.4mm, yo lo hice de ABS pero se puede hacer con PLA
This is a cord organizer for a 2mm in diameter, short cord. I designed it specifically for the Colmi R02 smart ring charge cord, but should work for any pliable 2mm diameter cord. I have also included the OpenSCAD model for this that…
instructions are WIP openscad model will be added later Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: generic PLA Notes: core: with brimm for exra stickyness sides:…
Atmos Badge with the CoolMaster logo
Reynholm Industries - IT Crowd Sign Introduction I like cool logos and I really like the logo of “Reynholm Industries” from “IT Crowd” so I decided to design and print my own sign, so I can hang it onto my wall and just be happy.…
Fan got knocked off a table and the blade broke. I couldn't find a replacement model, or even a replacement part from manufacturer, so here we are. I printed with my 5TH Prusa XL in Sunlu black PETG with support interface Sunlu Black PLA.…
"Life, uh... finds a way." Capture the ultimate cinematic meme with this high-detail figurine of Dr. Ian Malcolm. This model immortalizes the famous "sexy" lounging pose from the original Jurassic Park , featuring Malcolm resting on his…
I have made a Ignition Mount for the Kolm ignition with a gap for velcro or cable tie ; Zündungshalter Kolm BX120 für Klettschlaufe. Print it with PETG and use support for the gap. Use some rubber grommets and put it into the srew holes.
Coat of arms of the municipality of Bornholm.
They are part of the new Boho Collection , a growing series of wearable and decorative objects crafted with a love for artistic expression. For the best printing results, it is recommended to use a 0.16 / 0.2 mm layer height , a 0.4 mm…
Memorial plaque from Sveavägen-Tunnelgatan in Stockholm. May be used as drink coasters
I have some aluminium chairs for my balcony an I noticed that one of the feet was missing. I created this design to plug the hole so the aluminium does not scratch the floor. The STL and GCODE files included here are a good fit for the…
Notes of solmization with notation for kids keyboard. Printed in two colors, PETG, infill 100%. Ironing of base color top layer before lettering with black. Enjoy.
Support for attaching the mirror on a wall Print Settings Printer Brand: Artillery Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0.2 Infill: 50% Filament: RedLine PETG Bronze Category: 3D Printing
